Web Service SOAP Error

Hello,
I created a form and report on a Web Service. When I enter parameter values and submit, I receive the following error. This is the first web service form I've created and I could use some direction on how to trouble shoot this error.
ORA-20001: soap:Server Server was unable to process request. --> <SystemError errorcode="12" ><![CDATA[ *******Begin Facets Defined Data******** File: ErSysaClsBrokerRegion.cpp Function: ErSysaC
     Error      Error sending request.
OK
Thanks,
Matt

Hi,
I am still facing the same problem. Did you find a solution to this issue?
Thanks a lot in advance.
Regards,
Sven

Similar Messages

File to Web service (SOAP) to File scenario with out BPM in PI 7.1

Hi All,
I have scenario File to Web service (SOAP) to File scenario with out BPM.i am getting the below error:
1) Error MP: unexpected exception caught com.sap.aii.af.service.cpa.impl.exception.CPAObjectKeyException: Value of key must not be null: ObjectId
2) Error ROB: error during processing: com.sap.aii.af.lib.mp.processor.ModuleProcessorException: Processing Error
PI server is 7.1 with SP:8
I have configured the scenario like this
1) 2 File channels - Sender & Receiver ,1 RFC channel - Receiver. We need to note that, the additional Module parameters need to be added only for sender File channel
2) Created Sender Agreement
3)Created Receiver Determination
4)Created Interface Determination
5)Created Receiver Agreement
Regards,
Ramesh

Hi,
Thanks for your reply!!
My Scenario is File to SOAP to File.
Configred modules in Sender channal below:
Prcessing sequence:
Number       Module Name                                        Module Key
1..........       AF_Modules/RequestResponseBean.......1
2..........       CallSapAdapter..........................................2
3..........       AF_Modules/ResponseOnewayBean.......3
Module Configuration:
Module Key                                       Parameter Name                                       ParameterValue
1                                                        passThrough                                            true
3                                                        receiverChannel                                       receiverChannel name
3                                                        receiverService                                        receiverService name
please tell any more confiration requered.
Regards,
Ramesh

Invalid Web Service URL Error

I am trying to access define a new webservice system using the WSDL for my local queryview web service. When I put in the WSDL URL it comes back with a "Invalid Web Service URL" error. If I put the URL in the Browser address, it successfully brings back the web service information. Any ideas why I can't define this web service system?
http://<server>:8001/sap/bw/xml/soap/queryview?sap-client=040&wsdl=1.1
<server> is a token for posting concerns...
Thanks!

I am imagining that the BW QUERY_VIEW_DATA web service complies to the Basic Profile 1.0.
And I don't quite understand this part?
<i>In addition, connections to Web services for SAP backend systems must be performed via logical destinations (configured in the SAP J2EE engine with the Visual Administrator) and not via portal systems</i>
Since the QUERY_VIEW_DATA Web Service resides on my BW system is the BW system considered a SAP backend system? Any guidance is greatly appreciated.

Web Service (SOAP) From Oracle Forms

From the exaples of calling web services (soap) from pl/sql, it seems very poor and troublesome. I've seen a few articles with good points about why not to do this from pl/sql. So, I was hoping someone in the forums could share their opinions and approaches to using web services from forms based applications. I would ideally like to hear reasons people chose not to use pl/sql.

There are some examples of calling web services from forms on the Forms OTN page - works fine although I would encourage the use of the new JVM pooling features as this will aid scalability and performance.
Regards
Grant Ronald
Forms Product Management

How to install and consume GroupWise Web Service (SOAP)

Hello! I'm Razvan, programmer from Romnia, and I am new to GroupWise development.
I am asking if anyone could help me with a C# Visual Studio 2010 example of how to install and consume GroupWise Web Service (SOAP).
The documentation from novell site didn't help me, i didn't understant much of it.
All I need is either a link to a documented GroupWise C# developer step-by-step tutorial, or some code examples.
Can you please show me some code examples in C# with:
1)loging in using a username and a password,
2)retrieving contact list,
3)retrieving appointment list,
4)sending a mail,
5)setting an appointment
I don't know how to use "groupwise.wsdl" and customise it so that it points to our GroupWise server.
Please, I really need this because I am working at a project right now which involves GroupWise integration.
I hope I haven't disturbed anyone with my simple question.
I know this might be a very simple question given the complexity of the other posts here, but that's why I really hope I will get an answer soon.
Thank you very much!
Signature:
How old is the Orthodox faith?
How old is the orthodox faith?

Just a comment.
The value for the version element should be "1.02"
not "1.2".
Preston
>>> On Tuesday, March 01, 2011 at 8:06 AM,
TheRomanian<[email protected]> wrote:
> I have great news! After strong documentation yesterday and today, I've
> just made a successfull example that actually connects to our GroupWise
> server.
>
> I made it in PHP.
>
> I need an ASP.NET + C# application, but now is very simple to convert
> it. I post the PHP code here for other people who in future might be
> interested in finding out.
>
> So a simple PHP GroupWise Login code using "groupwise.wsdl" web
> service:
>
>
> require_once('./GWService/GroupwiseService.php');
> require_once('FB.class.php');
>
> $classmap = array(
> 'Authenication' => 'Authenication',
> 'PlainText' => 'PlainText',
> 'loginRequest' => 'loginRequest',
> 'loginResponse' => 'loginResponse',
> 'logoutRequest' => 'logoutRequest',
> 'logoutResponse' => 'logoutResponse',
> 'UserInfo' => 'UserInfo',
> );
>
> $gwservice = new GroupwiseService(
> "./WSDL/groupwise.wsdl",
> array(
> "location" => "http://11.150.40.78:8756/soap",
> *Your GroupWise server IP:
> and PORT*
> "classmap" => $classmap,
> "trace" => true)
> );
>
> // do login
> $pt = new PlainText();
> $pt‑>username = *"YOUR GROUPWISE USERNAME"*;
> $pt‑>password = *"YOUR GROUPWISE PASSWORD"*;
>
> $lr = new loginRequest();
> $lr‑>auth = $pt;
> $lr‑>language = "en";
> $lr‑>version = "1.2";
> $lr‑>application = "phpClient";
>
> $lres = $gwservice‑>loginRequest($lr);
> //print_r($lres);
>
>
> I Hope this will help others.
>
> ‑‑
> Signature:
>
> How old is the Orthodox Faith?
> 'How old is the orthodox faith?'
> (http://www.orthodoxphotos.com/history.shtml)

Web Service deploy error

Hello everyone!
I've created a Web Service from a VI. This VI has two inputs values: a String and and Int8 and one single output: an array of DBL values (array of 1x3). Both inputs and outputs are well connected through the Connector Pane.
So, in the Project>> Build Spedifications I've created WS, builded with the Advanced>> Use LabVIEW 8.x file layout option checked, in the WebService(RESTful) settings dialog. The problem appear when I try to deploy this WS. The next error is shown:
Error LabVIEW: (Hex 0xFFFEF84D) LabVIEW Web Services: An error occurred when extracting the deployed Web service. Rebuild the Web service by selecting the "Use LabVIEW 8.x file layout" option in the Advanced tab of the web Service properties dialog.
How can I solve this problem?
Thank you!
Francisco José Gómez López
Software Engineer
Solved!
Go to Solution.

This is exactly what I've done! I build my web services with this option checked. I don't know the reason why the error still persist.
I attach a zip file containing the Web Services VI and other VI needed. If you coult try to build the WS and deploy it...
Francisco José Gómez López
Software Engineer
Attachments:
VIasWS.zip ‏138 KB

Web services build error

Hi All,
I have created and deployed a Java web service banking project now i want use this web services methods into .net clint. For that in .net peoples able to see the list of web services mathods when they are use those methods they face the problem like "Web services build error...". But when the java clint call the same web services methods it works fine.
Im tired to resolved this problem please any one tel me how to resolve this problem.
Thanks,
kalyan N

Both. I deployed the application under the IAS (902) and a standalone (903)environment. The IAS (port 7777) an the standalone oc4j (port 8888) is running with the same error.
P.S. The server is down today for hardware technical reasons

Web Service Task Error

Hi, After successfully testing connection to my source web service, while executing my web service task, I face the following error. Can anyone help me????
[Web Service Task] Error: An error occurred with the following error message: "Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebserviceTaskException: Could not load the proxy for the specified Web service. The error is: Could not load file or assembly
'iiglotg3.dll' or one of its dependencies. Access is denied..
at Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebMethodInvokerProxy.loadProxyInAppDomain()
at Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebMethodInvokerProxy.InvokeMethod(DTSWebMethodInfo methodInfo, String serviceName, Object connection)
at Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebServiceTaskUtil.Invoke(DTSWebMethodInfo methodInfo, String serviceName, Object connection, VariableDispenser taskVariableDispenser)
at Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebServiceTask.executeThread()".
Regards,
Njdeh Tahmasian

Could not load file or assembly 'iiglotg3.dll' or one of its dependencies.
Access is denied..
Looks like a permission issue or maybe the assembly don't exists on the server where the package is running; you should check that first.
Olaf Helper
[ Blog] [ Xing] [ MVP]

Web service task: Error when returning an empty array

Hi,
I've encountered an annoying error when using a Web Service Task from an SSIS package in SQL Server Data Tools.
[Web Service Task] Error: An error occurred with the following error message: "Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebserviceTaskException: Could not execute the Web method. The error is: Index was outside the bounds of the array..
at Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebMethodInvokerProxy.InvokeMethod(DTSWebMethodInfo methodInfo, String serviceName, Object connection)
at Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebServiceTaskUtil.Invoke(DTSWebMethodInfo methodInfo, String serviceName, Object connection, VariableDispenser taskVariableDispenser)
at Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebServiceTask.executeThread()".
It seems that the Web Service Task generates this error when returning an empty response from the WSDL. I've seen several topics about this here on MSDN but they are all from 2008-2009 and seem to suggest that
this is a bug. The workaround suggested is using a script task but I would really love to avoid that since my programming skills are lacking.
I'm using Visual studio 2010 with SP1.

Hello,
From my own experience: in all the cases where I had to use SSIS 2008 to retrieve data or send data to Webservices, I had to revert to using Script Tasks or Script components. Whenever I tried with a Web service task, because the job looked simple, I had
to abandon it in favour of Scripts. Keep in mind that I try to make use of the SSIS components as often as possible, before reverting to Scripting. But handling web services is the one exception, where I always use scripts. In SSIS 2012 I did not find
any significant improvement of the Web service task and hence no compelling reason to use it.
Jan D'Hondt - SQL server BI development

Web Service SOAP Sender Authorization

Hi all
I have been implementing a Web Service (SOAP Sender CC) that should be consumed by an external party. I have been testing it successfully using XMLSpy with the drawback of the authentication box coming up even though I have added sap-user and sap-password to the URL as following:
http://<host>:50000/XISOAPAdapter/MessageServlet?channel=:SOAP_Service:CC_SOAP_Sender&sap-user=<name>&sap-password=<pass>
The user that I have created for this has the profile SAP_XI_APPL_SERV_USER assigned.The request is successfully executed when I enter <name> and <pass> in the box. My understanding of it would be that the box does not show up if the login parameters are provided with the URL. Do I have to do any additional settings so that the login information will be taken from the URL parameters automatically instead bringing up the authoritzation box?
My CC settings are as following:
Adapter Type: SOAP (SAP BASIS 7.00)
Sender
Transport Protocol: HTTP
Message Protocol: SOAP 1.1
Adapter Engine: Integration Server
HTTP Security Level: HTTP
Conversion Parameters: Keep Headers
Quality of Service: Best Effort
Any feedback would be appreciated.
Thank you,
Daniel

Hello Daniel,
1. You can add username and password to the SOAP URL and expose your XI Interface as a webservice. Just that the URL is different than the one you are using and you do not need a Sender SOAP adapter but the blog I have listed above.
2. You can turn of Basic authentication on Sender SOAP adapter's but it is not recommended as it would turn off all authentication for SOAP scenarios and it can lead to security risks.
I have seen a few forum threads describing how to turn of Basic authentication for SOAP adapters but from what I have heard from SAP, they do not recommend using this option.
Regards
Bhavesh

SSIS Web Service Task Error with WCF Service

I have read all the other posts on this site and have not been able to resolve my issue.
For testing purposes i created a very simple WCF service that takes no arguments and returns true. That is all it does.
When i create a winform client and instantiate the service i can run my service method and get true back so i know the service works.
I then create a test SSIS package with 1 task, a web service task.
I set the web service tasks properties as follows:
http connection: http://localhost/WCF_SSIS_Prototype/Service1.svc
wsdl file: C:\...\SSIS_WCF_Prototype\Service1.wsdl (I know this is not a valid path, i changed it for posting to forum)
Service: Service1
Method: GetData
Variable: User::BResult
When i run the package i get the following error:
[Web Service Task] Error: An error occurred with the following error message: "Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebserviceTaskException: Could not execute the Web method. The error is: Method 'ProxyNamespace.Service1.GetData' not found..    at Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebMethodInvokerProxy.InvokeMethod(DTSWebMethodInfo methodInfo, String serviceName, Object connection)    at Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebServiceTaskUtil.Invoke(DTSWebMethodInfo methodInfo, String serviceName, Object connection)    at Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebServiceTask.executeThread()".
I'm not sure why it is saying "Method 'ProxyNamespace.Service1.GetData' not found. It the web service task trying to create a proxy class and naming the proxy class namespace ProxyNamespace?
Any help is greatly appreciated.

Hi,
How do you get around the same issue if your string type is based on a client token ? I downloaded the .wsdl file, was able to see the service name, method and when selecting a method type, I am required to provide a client token which was given
to me. (Name column = clienttoken, Type = string, Value = 2227656 - ec8922 (client token numbers goes there)? I am new to use ssis and need your help please
error message: Web Service Task] Error: An error occurred with the following error message:
"Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebserviceTaskException: The web serrvice threw an error during method execution. The error is: An error occurred
when verifying security fro the message..
at Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebMethodInvokerProxy.InvokeMethod(DTSWebMethodInfo methodInfo, String serviceName, Object connection)
at Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebServiceTaskUtil.Invoke(DTSWebMethodInfo methodInfo, String serviceName, Object connection)
at Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebServiceTask.executeThread()"
Thank you and regards,
Bili

An unexpected exception occurred while attempting to locate the run-time information for this Web Service. Error: java.lang.reflect.InvocationTargetException:null

Hi I m getting the below wxpection when i run test browser from workshop. please help me.
An unexpected exception occurred while attempting to locate the run-time information for this Web Service. Error: java.lang.reflect.InvocationTargetException:null

Thamarai,
Can you provide more information on your jws ? Also can you start the server
from the command line with verbose option. This will cause
weblogic_debug.log to be generated in the domain folder.
Raj Alagumalai
Backline Workshop Support
"Thamarai Selvan" <[email protected]> wrote in message
news:[email protected]..
Hi I m getting the below wxpection when i run test browser from workshop.please help me.
>
An unexpected exception occurred while attempting to locate the run-timeinformation for this Web Service. Error:
java.lang.reflect.InvocationTargetException:null

"invalid web service URL" error for create web service system

Hi.
I want to call web service in visual composer and try to create Web Service definition.
When I push create button in visual composer, I got "invalid web service URL" error.
My web service is located in SAP ABAP System and I can check WSDL URL in web service homepage.
(http://mycompany.com:8000/sap/bc/srt/rfc/sap/ZTEST?sap-client=500&wsdl=1.1)
Any ideas for this error ?
Regards, Arnold.

Hi
Please can you create the web service in the portal as a portal system, this will work and you will be able to see the service in Visual Composer.
Jarrod Williams

Cannot enable HP Web Services: "Connection error. Check Internet connection."

Hello,
I have a problem with LaserJet setup using Wi-Fi network from windows 7 and 8. The problem as far as I understand is due to inaccessible HP Web Services.
Details:
1, The printer works good by USB.
2. The printer is correctly configured to use Wi-Fi router with right password.
3. It can be successfully ping'ed from Windows
4. In Web browser I can enter on printer's IP
(Serial Numbers are hidden as you recommend, firmware updated)
4. But when I try to Enable HP Web Services, an error message appears:
which is strange, because the printer is connected to the same router as the computers and other devices with automatic configuration (and internet is available without any proxy when I am typing this message):
Please help to resolve this issue.
Thanks,
Fedor

Thanks for clarifying Fedor,
HP Web Services are not related to the pritner installation over the local network, those are two different features.
However that may indicate a nework issue.
First try running the HP Print & Scan Doctor below on one of your PCs:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&jumpid=ex_r4155/hho/ipg/ccdoc/p...
Does the tool can see your printer throught eh local network?
By clicking the top Network menu and Troubleshoot Firewall, what Firewall software is detected on your system?
Try disabling it and check if that may help.
From teh top Network menu select Show Advanced Information.
What is the IP address of your PC?
I also suggest rebooting the router by unplugging its power for a moment, then reboot the printer and try installing it again.
If the issue persists, what is your router model?
May you see any difference by connecting the printer to your router with an Ethernet cable?
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Web Service Proxy error: "No operation found using soap keys"

I'm trying to use the new tools, and having a little trouble. Not many results when searching for this error message.
I have developed and deployed a new Java web service proxy using the outside-in approach according to the [help docs|http://help.sap.com/saphelp_nwpi71/helpdata/EN/46/7f2fef88190ad3e10000000a11466f/frameset.htm] (PI 7.1 SP07, NWDS 7.1 CE SP09 PAT0000). Started with a Service interface in ESR, then generated a java bean skeleton into a new EJB project in NWDS, then wrote business logic and deployed.
When I test the web service (with 3 different SOAP test clients) I get the same error, below:
     <faultstring>com.sap.engine.services.webservices.espbase.server.additions.exceptions.ProcessException:
No operation found using soap keys [], [spmat_jdbc_receiver_proxy]. InterfaceMapping Object class:
com.sap.engine.services.webservices.espbase.mappings.InterfaceMapping mappings: {BindingQName=
{urn:nexeninc:pi:ll:spmat:100}SI_I_Sync_SPMAT_JDBC_Receiver_ProxyBinding, BindingType=Soap, PortTypeQName=
{urn:nexeninc:pi:ll:spmat:100}SI_I_Sync_SPMAT_JDBC_Receiver_Proxy, JAXWSInterface=true, InterfaceMappingID=-
27e4d529:127632b5c52:-7ebb}.</faultstring>
My service endpoint interface looks like this (unimportant lines removed):
package nexeninc.pi.ll.spmat._100;
@javax.jws.WebService(name = "SI_I_Sync_SPMAT_JDBC_Receiver_Proxy", targetNamespace = "urn:nexeninc:pi:ll:spmat:100")
@javax.jws.soap.SOAPBinding(parameterStyle = javax.jws.soap.SOAPBinding.ParameterStyle.BARE, style = javax.jws.soap.SOAPBinding.Style.DOCUMENT, use = javax.jws.soap.SOAPBinding.Use.LITERAL)
public interface SIISyncSPMATJDBCReceiverProxy {
@javax.jws.WebMethod(operationName = "SI_I_Sync_SPMAT_JDBC_Receiver_Proxy", action = "http://sap.com/xi/WebService/soap1.1")
@javax.jws.WebResult(name = "spmat_jdbc_receiver_proxy_response", targetNamespace = "", partName = "spmat_jdbc_receiver_proxy_response")
public generated.SpmatJdbcReceiverProxyResponse siISyncSPMATJDBCReceiverProxy(@javax.jws.WebParam(name = "spmat_jdbc_receiver_proxy", targetNamespace = "", partName = "spmat_jdbc_receiver_proxy") generated.SpmatJdbcReceiverProxy spmat_jdbc_receiver_proxy);

(continued from above post)
And my implementation bean looks like this (unimportant lines removed):
package nexeninc.pi.ll.spmat._100;
@SessionHandlingDT(enableSession = false)
@AuthenticationDT(authenticationLevel = AuthenticationEnumsAuthenticationLevel.BASIC)
@TransportGuaranteeDT(level = TransportGuaranteeEnumsLevel.NONE)
@WebService(serviceName = "SI_I_Sync_SPMAT_JDBC_Receiver_Proxy_Service", portName
= "SI_I_Sync_SPMAT_JDBC_Receiver_Proxy_Port", endpointInterface
= "nexeninc.pi.ll.spmat._100.SIISyncSPMATJDBCReceiverProxy", targetNamespace = "urn:nexeninc:pi:ll:spmat:100", wsdlLocation
= "META-
INF/wsdl/nexeninc/pi/ll/spmat/_100/SI_I_Sync_SPMAT_JDBC_Receiver_Proxy/SI_I_Sync_SPMAT_JDBC_Receiver_Proxy.wsdl")
@Stateless
public class SIISyncSPMATJDBCReceiverProxyImplBean {
     @RelMessagingNW05DTOperation(enableWSRM = false)
     public generated.SpmatJdbcReceiverProxyResponse siISyncSPMATJDBCReceiverProxy(
               generated.SpmatJdbcReceiverProxy spmat_jdbc_receiver_proxy) {
          System.out.println("Starting siISyncSPMATJDBCReceiverProxy.");
When we first created the new endpoint in NWA, we tried asigning a new name for both "Service Endpoint Name" and "In New Service", and we received this error.
We then deleted the endpoint and created another new one, setting "Service Endpoint Name" to match the portName in the implementation bean: "SI_I_Sync_SPMAT_JDBC_Receiver_Proxy_Port", but that didn't work either. The only option we enabled in the endpoint was HTTP authentication: User ID/Password.
My ejb-j2ee-engine.xml and application-j2ee-engine.xml are both empty (but they exist).
I am new to EJBs and JAX-WS so hopefully it's something simple. All help appreciated!
Apologies for the long (and wide) post.
- Rob

Web Service SOAP Error

Similar Messages

Maybe you are looking for