Web Services for ECC 5.0 .

Hi ,
I' m new to Web Services in a ECC 5.0 , where do I start ? Any documentation, or web link will be usefull , Thank you .
Also, can Web Services in ECC 5.0 be done "inside" SAP , like in SE80 ?
Or do we have to have Java NWDI ?
The base idea here is to have a "shop" on the Web (Not being SAP), and to use WebServices to Check Stock, Create Orders , Order Status , ... .
Regard's

Hi Christophe,
Yes Webservices can be done in SAP using SE80. To start with you can follow the inside out approach . For this you need an RFC enabled FM or a BAPI which you can readily convert into a webservice . Just go to SE80 look for your RFC or BAPI , Right Click and select Create Webservice from the menu . The resulting wizard will help you with the rest. For more info pls refer to this link. Very useful for people who are totally new to webservices.
<https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/30f1b585-0a01-0010-3d96-ad0ea291c4f9>.
Best Regards, Girish
PS: Reward points if you are happy with the reply

Similar Messages

Problem consuming Web Service from ECC 6.0 using dual certificates

Hi, I am trying to consume a secure web service on ECC 6.0 - so far without much luck.
When I try to connect to the ws server, it seems there are three certificates in action: a CICS certificate for establishing the SSL connection, a 'root' certificate from the PKI certificate issuer, and a private certificate issued by the above issuer (please forgive me if a have the syntax wrong - certificates are not my primary line of work). So, using Trust Manager (STRUST), I have created a PSE named 'OES' and imported all three certificates into it.
In SOAMANAGER I have set up the end-point using the WSDL-file and set the following parameters:
- Authentication Method = X.509 Client Certificate
- Trustworthiness Method = Holder of Key
- Issuer = <issuer from the root certificate>
- Name of Attester = <blank>
- Validity of SAML Assertion = 180
- Caching of SAML Assertions = False
- Attester System Destination = <blank>
- Name of Attester = <blank>
- User = SRxxxWS
- Password = <blank>
- Client PSE = OES
When I try to consume the web service, I can see in the log files that the CICS certificat is used for establishing the SSL connection but all I receive back is an HTTP 403 "Client Authentication Error". If I remove the CICS certificate from the PSE, the connection is not made.
How do I make the client certificate available for the connection? Have I approached the problem from the wrong side? Has anybody experienced something similar? Any help will be highly appreciated.
Thanks,
Bo

Hi,
I am not Certificate expert either but you can get plenty of help from "Security" forum on SDN. I can help you bit with some related SAP notes and forum answers:
See following notes :
1324884 - Analysis of ABAP Web Service SOA Configuration
1318906 - Trace analysis of SSL problems
1319507 - Overview: Analysis of ABAP Web Service Configuration
See this forum discussed about consuming secured ws in webdynbpro:
Problem in Calling Secure Webservice.
Articles:
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/92914af6-0d01-0010-3081-ded3a41be8f2&overridelayout=true -
Web Services Security Configuration Guide (discussed IBM and NW WS security but you can find some examples and hints there)
Regards,
Gourav

RFC works but web service for that RFC does not work..weird??

hi all,
I created an RFC enabled function module to create a Sales Order in SAP CRM for both for Varinat Configurable and Normal Materials.
The RFC Works well...if i test it..it creates an order and if i go and check the sales order in CRM GUI. i find that sales order is perfect with the configuration data for the configurable items..
Now i created a Web service for this RFC by calling the Web service creation wizard.
Now i am testing the Web service in SOAMANGER T-code and the sales order is created and weird thing the configuration data is missing for Varinat configurable item..
But i dont encounter this problem if i am testing the RFC directly
What could be wrong...why is my web service behaving weird?
I am dying to find this out..did any body enocunter this situation befor ..please help

Sure Oliver..
I put a break point using external debugger and when i was testing the Web service in SOAMANAGER..
i could then land into ABAP debugger.
There in my RFC i put a logic such that i diffenetiate between VC and Non-VC items and fill the Charateristic Values only if it is aVC item.
I saw that the IF condition was not executing as they suddenly changed the material structure in ECC and it reflected in CRM.
SO i am inputting 18 digits of material no like '000000000000000001' for '1'...but the if condition was checking against 1 =1 so that loop never executed and chara values are not getting filled.
But if i test RFC in se37 ..it works as i am inputting 1...
Since Web service works with XML (WSDL) need to be very careful with the format in which data is inputted and the format in which the logic we wrote in RFC works.
Once again ..thanks to all people who helped me with the answers...
Regards,
Jessica Sam

Web Service on ECC 6.0 SP14

Hi everybody,
I have a message interface on PI 7.0.
I need to generate, from this interface, an asyncronous Web Service on ECC 6.0 SP14 for a direct connection without PI.
How can I do that?
hank you

Hi
if you want to create the web service using the function module do the following steps.
the main requirement for creting the web service using the function module is the function should be RFC enabled.
1. To create web service of this Function Module
Go to Utilities ->More utilities->create a web service->from function module
2. A new wizard will be open to create the web service and click on continue.
3. Enter the web service name (any name that you want to give) and give the short description, select the Endpoint type as Fuinction Module and click on continue.
4. Select the Function Module name that you are using.
5. select the profile as Basic Authentication: SOAP Pro.
6. Press continue to release the web service. The web service is now created
To check the web service Go to the transaction WSADMIN and select the node
SOAP Application for RFC-Complaint FMs and expand the node and select your web service that you have created and expand the web service node up to the last .
Now to test the web service select the last node and click on the web service home page button and it will open the home page.
from this page u will get the wsdl file as well as you can testthe web service.
Thanks
Rinku

How to create web service for a Java class in SAP NetWeaver Studio

hi all,
i am using SAP Netweaver Developer Studio.have created a normal java project and i want to create web service for one of the classes in this project. i used the Web Service Creation Wizard to create a web service for this class. but it says there's no methods available for VI. all my methods in this class are public, what should i do?

Hi,
I guess there are other ways. But this is an easy way, if you find the right wizards.
Besides this it is good practise to define interface methods so that session bean implement these interface methods, and thus seperate the interface from the implementation.
In this approach you will need 3 projects:
An enterprise application project (will contain EJB Module)
An EJB Module project (will contain session bean)
A Java project (contains code that implements the session bean methods)
In my previous post I suggested to use a J2EE web mudule project. This was a mistake, it should be EJB module.
But it should be possible to do it in another way. It is up to you.
Good luck, Roelof

Test web service for a function module

Hello,
I have created web service for a functiona module. I can see the same service in SE80 in Enterprise Services.
How do I test this service?
I can see the URL in WSDL tab but when I try to execute it give me following error,
What has happened?
URL http://emhbssap15.domain.local:8027/sap/bc/srt/wsdl/sdef_service_name/wsdl11/ws_policy/document call was terminated because the corresponding service is not available.
Note
The termination occurred in system BDV with error code 403 and for the reason Forbidden.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:EMHBSSAP15_BDV_27-v:0-s:403-r:Forbidden
HTTP 403 - Forbidden
Your SAP Internet Communication Framework Team
The URL I am trying is
http://emhbssap15.domainname:8027/sap/bc/srt/wsdl/sdef_servicename/wsdl11/ws_policy/document?sap-client=400
Can anyone help me?
Regards,,,
Sunil Joyous
Edited by: Sunil Joyous on Dec 2, 2009 1:52 PM

Thanks Venu for your input.
Unfortunetly we do not have Java stack on our development system. You said we can test it by SOAP UI tool. Where do I see the WSDL file for the service?
I used WSDL from SE80 --> Service --> WSDL tab, but SOAP UI does not accept this format ?
What are the other ways I can test this web service? I think about SAP PI, importing RFC & creating web service or creating ABAP proxies... Which is the best way to go forward in case you do not have Java stck.
Regards,,,
Sunil Joyous

Standard web services for Goods receipt and purchase order

Hi,
Can you please tell me the std web services for creating the Purchase order and Goods receipt?
Is there a link where i can get the information on this implementation?
Thanks
Srini

Hi,
Please reffer ES workplace.
[Order to Cash|http://esworkplace.sap.com/socoview(bD1lbiZjPTAwMSZkPW1pbg==)/render.asp?packageid=DE0426DD9B0249F19515001A64D3F462&id=9B0DDD8CCC484FA79EBBBA7F78B57DA7]
Thanks
Farooq

Issue in creating web service for a ABAP Function Module

Hi,
now i'm learning how to create web service for a ABAP Function Module. I used the following steps.
1. select the Function Module, named "zws_test".
2. in the context menu, select "create->proxy object". so we enter into wizard.
3. in the wizard, press the radio button "Service Provider".
4. in the next page, press the radio button "Existing ABAP Objects(Inside Out)".
5. In the next page, Enter the "zws_test_prvider" as Service Definition and select "Function Module" as Endpoint Type.
6. in the next page, enter "zws_test" as Function Module and mark the "Mapping der Namen" button
7. in the next page,select "PRF_DT_IF_SEC_LOW" as Profile and mark "Deploy Service".
8. Save in the local package.
9. then it will pop up a window with title "WSDL Source". i selected "URL/HTTP Destination" and press "OK".
10.in the next page, i enter the URL as "http://hostname:portnumber/", and press "OK".
11. then it will pop up a window with title "Display logs". A record with error message "HTTP error(return code 404, message "Not found")" appears.
12. i press "ok" and a service provider with name "zws_test_prvider" appears in my local package.
13. i use "zws_test_prvider"'s URL to create a service consumer "ZCO_WS_TEST_CONSUMER" and logic portal "LP1".
14. But when i test my service consumer "ZCO_WS_TEST_CONSUMER", it will throw an exception "cx_ai_system_fault" with errortext "SOAP:14 Unexpected element -el=definitions ns=http://schemas.xmlsoap.org/wsdl/".
15. I use t-code SM59 to test connection and get the following info.
      Status HTTP Response     200
      Status Text                      OK
      Duration Test Call             328 ms.
who can give me the reasons about item 11 and 14, and explain me how to create service provider and service consumer for a Function Module.
Thanks in advance
Johnney

have you seen this weblog
/people/thomas.jung3/blog/2004/11/15/bsp-150-a-developer146s-journal-part-xiii-developing-abap-webservices

XI for create web servicies for SAP R/3 4.6C

Hi All,
we are implementing PM (Plant Management) module of SAP R/3 4.6C and we have the necessity to create web services for some PM functionalities. Infact we need to integrate our SAP R/3 4.6C with other applications (non-SAP) through TIBCO (it's mandatory). So we think to use SAP XI. Moreover our users don't want to use SAP GUI for the accessing to the PM functionalities but they want an UI more friendly. So we think to use SAP EP.
Which is your opinion about this architectural scenario? Is it possible to fulfil the requirement of our business users with a more simple architectural solution (for example with WEB DYNPRO)?
Many thanks in advance for your collaboration.
Regards,
Bob

Infact we need to integrate our SAP R/3 4.6C with other applications (non-SAP) through TIBCO (it's mandatory). So we think to use SAP XI.
TIBCO is another middleware. So once you expose your R/3 functionalities as web service, you may directly use TIBCO to integrate and XI won't be required at all.
Moreover our users don't want to use SAP GUI for the accessing to the PM functionalities but they want an UI more friendly.
WebDynpro application would provide you an easy GUI and could act as Soap client as well to send data.
Regards,
Prateek

How to create web service for database application

Hi everyone
Is it possible to create a web service for an apex database application page which has reports and radio fields and dialog boxes and validations in it. IF it is possible to create, pls help me with example or step by step procedure. I have seen all oracle docs of implementation of Web services in apex but unable to figure out how to get that link of wsdl for an application.
Thanks in advance.
Regards
Sandeep Artham

Hi,
I guess there are other ways. But this is an easy way, if you find the right wizards.
Besides this it is good practise to define interface methods so that session bean implement these interface methods, and thus seperate the interface from the implementation.
In this approach you will need 3 projects:
An enterprise application project (will contain EJB Module)
An EJB Module project (will contain session bean)
A Java project (contains code that implements the session bean methods)
In my previous post I suggested to use a J2EE web mudule project. This was a mistake, it should be EJB module.
But it should be possible to do it in another way. It is up to you.
Good luck, Roelof

Create a Web Service for Exchange with form based authentication ?

I want to create a Web Service in Apex that can create appointments in my exchange calendar. Exchange is offering web services for that.
When i try to create the web service reference in Apex i provide the URL and my Exchange login, but it is failing.
The exchange guys told me, that there is a ISA Server running where i need to authenticate through a form.
Does anyone know, how i can implement a webservice in Apex, when the access to the wsdl url needs login through a form ?
Or : what other types of authentication does Apex know ? What possibilities do i have ?
Thanks for answers.
Bernd

Hi
Presume you've already found this information, but in case not ....
Exchange 2007 provides out of the box web services, see
http://msdn.microsoft.com/en-us/library/bb408417.aspx
As a disclaimer - neither myself of the team I work with have tried to use these web services within APEX.
Regards
Chris

Creating Web service for PL/SQL Procedure with Complex Data Types

I need to created web service for PL/SQL Procedure with Complex Data types like table of records as parameters, how do we map the pl/sql table type parameters with web service, how to go about these?

Hello,
When you are creating a service from a Stored Procedure, the OracleAS WS tools will create necessary Java and PL wrapper code to handle the complex types (table of record) properly and make them compatible with XML format for SOAP messages.
So what you should do is to use JDeveloper or WSA command line, to create a service from your store procedure and you will see that most of the work will be done for you.
You can find more information in the:
- Developing Web Services that Expose Database Resources
chapter of the Web Service Developer's guide.
Regards
Tugdual Grall

How to write a web service for uploading a file

Hi all,
I want to write a web service for uploading a file to some specified folder under application server, how to do that? Thanks

I believe the "difference" that you're seeing is that one web service is "RPC" style (The Hello World example) and one web service is "Document" style (The WSDL you have downloaded).
Document-style web service methods always have one element as a parameter, and this parameter manifests itself as a SOAPElement in the service interface.
RPC-style web services are true "remote procedure calls", and are more functional in nature, in that they accept multiple parameters. JAX-RPC will bind these parameters to generated Java types.

Creating RESTful Web Service for BLOB retrieval

Hi,
Just got RESTful web services working in Apex 4.2.1 with new Listener 2.1.
I have now been asked to create a RESTful web service by which photos in BLOB column can be retrieved upon providing the ID for that photo. Can this be done using the Creating RESTful Service Module of Apex 4.2.1? Looking at the Apex 4.2 documentation, I would assume this can be done, but has anyone used this with BLOB data?
Thanks,
Pat

Hi Pat,
Yes this can be done using RESTful Services - you just need to ensure the query used is in the required format. To obtain a BLOB for a given ID, you would need create a Resource template and handler with the following settings:
Resource Template Settings:
URI template: emppic/{id}
Resource Handler Settings:
Source query: select mimetype, product_image from demo_product_info where product_id = :id..where the format of the SQL query is SELECT 'content_type', blob_column FROM . . ., as mentioned in Rick Greenwald's Cloud White paper "RESTful Web Services for the Oracle Database Cloud", under the "SQL Source Type" section (see www.oracle.com/technetwork/database/database-cloud/public/restful-wp-1844130.pdf ):
where 'content_type' is a string passed to the browser to be used to identify the incoming data, and the column to identify the source of the data being sent back. This data is sent back untouched by the Oracle Database Cloud Service. The Media Resource Source Type is typically used for media objects, such as images, where the data will be directly handled by the recipient making the call.The MIMETYPE column in the sample query above holds the necessary setting for the 'content_type' i.e. 'image/jpeg'. The value of ID is then passed in as a parameter when calling the service e.g. emppic/1234. The item level help text would be more helpful if it included additional information, and this is something we intend on addressing in a future release.
I hope this example helps.
Regards,
Hilary

Configuring Web Services for Oracle XML DB

Hi all...
I think I need some help one this subject....
We have a 10G Release 2 Oracle single instance ( not RAC) install on a Linux Redhat v5.3 64 bit server. Are developers are user Visual Studio .Net and wnat to send xml files to a web service so that the xml file (containing data) can call a PL/SQL package (to be written) which will take the data out of the xml input file and insert rows into a prefined table within the instance. Now they have browsed the web and have come upon the following links...
http://docs.oracle.com/cd/B28359_01/appdev.111/b28369/xdb_web_services.htm
http://docs.oracle.com/cd/B28359_01/appdev.111/b28369/xdb22pro.htm#i1026724
Currently, within the database I looked at the schema XDB and have unlocked the account and connected as the user XDB. There are some 680 objects in the following groups...
SQL> select object_type, count(*) from dba_objects where owner='XDB' group by object_type;
OBJECT_TYPE COUNT(*)
SEQUENCE 2
PROCEDURE 5
OPERATOR 8
LOB 334
LIBRARY 12
PACKAGE 20
PACKAGE BODY 17
XML SCHEMA 25
TYPE BODY 5
TRIGGER 12
TABLE 36
INDEX 51
FUNCTION 5
INDEXTYPE 2
VIEW 2
TYPE 144
16 rows selected.
Now in the links above it mentions that the xdbconfig.xml needs to be altered etc. However, I have searched the entire $ORACLE_HOME and there is no file definition of that description.
From a DBA prospective...what do I have to install on the Linux server? I assume from the Oracle Database 10g Companion Products I need to lay down Oracle HTTP Server in a new Oracle home as the first step...or not? Does the HTML DB need to be installed as well?
And for Configuring Web Services for Oracle XML DB...what else has to be installed? And from what product line?
Thanks in Advance....
Cheers
Roegr

Hi Marco...
First of all ...thanks for the reply.
I followed the link and the infor in that web page. However, there were a few things that did not work....
1. The http://localhost:8080/ as is brought up a web page withe the heading as
==========
ORACLE DATABASE 10g EXPRESS EDITION LICENSE AGREEMENT..
==========
The other browser test ftp://localhost:2100/
did not find any page?
2. Then I went onto running (as the sysdba) the pl/sql to enable the ORAWSV Entry Service
however it error out. So I did a describe on DBMS_XDB and the function deleteServlet does not appear
then I had a look and this link to > http://www.liberidu.com/blog/?p=471
was for 11G and the other link > http://docs.oracle.com/cd/B28359_01/appdev.111/b28369.pdf
was for 11G.
However, we are on 10G
=================
SQL> select * from V$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bi
PL/SQL Release 10.2.0.3.0 - Production
CORE 10.2.0.3.0 Production
TNS for Linux: Version 10.2.0.3.0 - Production
NLSRTL Version 10.2.0.3.0 - Production
==================
So is there must be other sql for 10G?
Cheers
Rog

Web Services for ECC 5.0 .

Similar Messages

Maybe you are looking for