Web Services Not Working

Hello Everyone!
I have an HP Laserjet M1217nfw printer. Got everything working just fine, but when I try to get web services enabled (through the printer's web interface) I get the following error message when clicking on the "enable" button:
"Connection Error. Check Internet Connection".
I found several posts up here, and the fix seemed to entail changing the DNS server settings (in the printer) to Google's DNS numbers, 8.8.8.8 and 8.8.4.4. That did not work.
I also tried to update the printer's firmware, however I get a message during the update to disable the printer's RFU (remote firmware update). I have found no way to do this, and the update fails when I attempt it.
Sooooo......
I'm looking for anyone who either knows a fix for the web services error message.....or who, at the very least can tell me how to disable RFU on the printer so I can try updating the firmeware.
Any help on this would be greatly appreciated.

Hi WildNorth
Here is a url on how to print the configuration report.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02217343&cc=us&dlc=en&lc=en&jumpid=reg_r1002_us...
Let me know what it is showing for the firmware date please.
The newest version is Version20130912.
Printer on wireless or hardwired network?
What operating system are you running?
I will send you a private message with more information to try.
In the forum beside your handle name just click on the
envelope to view it.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Similar Messages

"no serializer is registered..." error with a web service not working

I'm using JDeveloper 10.1.3
EJB 3.0
I'm having issues with the web service not working after I create a client for it. The web service works fine up until I generate the proxy on the other side.
ERROR An error occurred for port: {http://buslogic/}MyWebService1SoapHttpPort: no serializer is registered for (class buslogic.runtime.....
I saved the file before I added the proxy and the wsdl looks the same between the working one and the non working one. I can not pin point the when the change to the web service is occuring. It seemed to work once all the way up until I had a ADF page trying to retrieve data, another time it failed when the proxy was created.
I can get the version that I saved to work immediately after the version that does not fails.
Any help would be greatly appreciated,
Dan

I'm using JDeveloper 10.1.3
EJB 3.0
I'm having issues with the web service not working after I create a client for it. The web service works fine up until I generate the proxy on the other side.
ERROR An error occurred for port: {http://buslogic/}MyWebService1SoapHttpPort: no serializer is registered for (class buslogic.runtime.....
I saved the file before I added the proxy and the wsdl looks the same between the working one and the non working one. I can not pin point the when the change to the web service is occuring. It seemed to work once all the way up until I had a ADF page trying to retrieve data, another time it failed when the proxy was created.
I can get the version that I saved to work immediately after the version that does not fails.
Any help would be greatly appreciated,
Dan

Web Services Not Working because wwv_flow_collections view is empty

Hello,
I followed this example to try and get a web service running in my Application:
http://apex.oracle.com/i/doc/advnc_rest_web_eg_2.htm
When I run the page and enter the zip code 43221 they recommend with a radius of 5, I get no results. When debugging and throwing the query into SQL Dev, I have no records in my wwv_flow_collections view. Looking at the tables that comprise the view, wwv_flow_collections$ and wwv_flow_collection_members$, these two tables would join on c.id = m.collection_id alone, but there are additional in-line selects involving the DUAL table that make the query return 0 records and therefore the view is empty. I've never messed with these views/tables, are these auto-populated by APEX? Can they be updated? Right now I cannot get any web services to work because of this. Here is the from clause for the wwv_flow_collections view:
FROM
wwv_flow_collections$ c,
wwv_flow_collection_members$ m
WHERE
c.session_id =
SELECT
v('SESSION')
FROM
dual
AND c.security_group_id =
SELECT
wwv_flow.get_sgid
FROM
dual
AND c.id = m.collection_id
AND c.flow_id =
SELECT
nv('FLOW_ID')
FROM
dual
Can anyone help? Thanks in advance!
John

John,
I have been working this week to set up the exact same thing and got the same empty result set that you have. In this case I believe it has nothing to do with APEX. I downloaded soapUI 4.0.1 which tests web services and used the WSDL described in the APEX Webservices tutorial for http://www.ignyte.com/webservices/ignyte.whatsshowing.webservice/moviefunctions.asmx?wsdl to create the same sample requests. It also returns no results.
So, I decided to use a different public WSDL and try to get it working. Here are my steps taken below:
BACKGROUND:
- I am using APEX 4.0 on an 11gR2 database, with ACLS set up for the APEX schema this app is using.
- First off, the site I used I just found through google. It is a currency conversion rate webservice. It is explained here: http://www.webservicex.net/CurrencyConvertor.asmx
- The WSDL is found here: http://www.webservicex.net/CurrencyConvertor.asmx?WSDL
SETTING UP THE WEBSERVICE:
1. In a new APEX application I went to "*Shared Components*" -> "*Web Service References*" -> "*Create*" to create a new web service reference
2. Selected manual
3. Called the webservice CURRENCY_TEST
4. Set the URL to http://www.webservicex.net/CurrencyConvertor.asmx
5. Set the Action to http://www.webserviceX.NET/ConversionRate (Action can be found in the WSDL - showing a few lines below)
<pre class="jive-pre">
<wsdl:binding name="CurrencyConvertorSoap" type="tns:CurrencyConvertorSoap">
<soap:binding transport="http://schemas.xmlsoap.org/soap/http"/>
<wsdl:operation name="ConversionRate">
<soap:operation soapAction="*http://www.webserviceX.NET/ConversionRate*" style="document"/>
<wsdl:input>
<soap:body use="literal"/>
</wsdl:input>
<wsdl:output>
<soap:body use="literal"/>
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
</pre>
6. WSDL explains that the version is *1.1* in this case. (However, this same WSDL has the same operation for 1.2 so it probably would work)
7. No Authentication
8. soapUI 4.0.1 gave me the soap request which in this case is the following:
<pre class="jive-pre">
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:web="http://www.webserviceX.NET/">
<soapenv:Header/>
<soapenv:Body>
<web:ConversionRate>
<web:FromCurrency>#FROM_CURRENCY#</web:FromCurrency>
<web:ToCurrency>#TO_CURRENCY#</web:ToCurrency>
</web:ConversionRate>
</soapenv:Body>
</soapenv:Envelope>
</pre>
9. Stored response in collection CURRENCY_COLLECTION
10. Saved my web service reference
11. Test the web service reference (you have to be on the web service references page and instead of the icon view of the report, use the list view. Click on the test icon to test the web service)
12. On the test page, change #FROM_CURRENCY# to USD (for US dollars) and #TO_CURRENCY# to EUR (Euros)
13. Click the test button and you should see a valid soap response with a currency rate within the ConversionRateResult tags
USING THE WEBSERVICE AND GETTING RESULTS:
1. Went back to the application and hit "*Create Page*" -> "*Form*" -> "*Form and Report on Web Service*"
2. Selected my CURRENCY_TEST web service reference
3. Next on the next page
4. For input parameters, left the defaults to create 2 inputs, From_Currency and To_Currency
5. Soap Style for this is Document (found in the WSDL as an attribute just after the soapAction attribute in the WSDL snippet above)
6. Message Format is Literal (Also found above in the wsdl:output for this operation under the use attribute)
7. XPATH is a bit complicated. In this case put */ConversionRateResponse* (I used the soapUI 4.0.1 to send the request and get back the soap response to see what the response tags would include and which path I'm going to)
8. Message Namespace is http://www.webserviceX.NET/ (which is also found in the response soap message - I'd really recommend a tool to test this outside of APEX)
9. For Parameter Names there is only one and it is ConversionRateResult (also found in the response soap message)
10. Finish and run the report.
OTHER GOTCHAS:
So I finally got this to work, but in my case I was querying a remedy webservice and the xml tags I get back are all xmlns:ns0 and all response tags prefaced with ns0:
In this case I had to after using the wizard go back and edit my query to change xmlns to xmlns:ns0 since the builder only assumes xmlns.
<pre class="jive-pre">
select extractValue(value(t),'/*/ns0:Assigned_Group','xmlns:ns0="urn:HPD_IncidentInterface_WS"') "Assigned_Group"
, extractValue(value(t),'/*/ns0:Assignee','xmlns:ns0="urn:HPD_IncidentInterface_WS"') "Assignee"
, extractValue(value(t),'/*/ns0:Resolution','xmlns:ns0="urn:HPD_IncidentInterface_WS"') "Resolution"
, extractValue(value(t),'/*/ns0:Status','xmlns:ns0="urn:HPD_IncidentInterface_WS"') "Status"
from wwv_flow_collections c,
table(xmlsequence(extract(c.xmltype001,'//ns0:HelpDesk_Query_ServiceResponse','xmlns:ns0="urn:HPD_IncidentInterface_WS"'))) t
where c.collection_name = 'INCIDENT_TEST'
</pre>
Good Luck!
Jonathon

Web service not working when called remotely

Hi there!
I built a simple web service to generate a sequence number to be cosumed by PDF forms.
It works perfecly when I run PDFs on my machine, using localhost, etc.
Whem deployed on the client's servers it does not work. The only difference is the client is running LiveCycle on Linux over their inhouse corporate network.
When the web service is added to forms in LC Designer, the ws structure is built correctly and if called from a web browser the XML response is ok too.
I've checked LiveCycle log file - there's nothing there, the ws is not even being called.
Where should I look for error messages or other resources to aid me in identifying the problem?
Thank you very much for any hints!
Marcos

Hi there!
I built a simple web service to generate a sequence number to be cosumed by PDF forms.
It works perfecly when I run PDFs on my machine, using localhost, etc.
Whem deployed on the client's servers it does not work. The only difference is the client is running LiveCycle on Linux over their inhouse corporate network.
When the web service is added to forms in LC Designer, the ws structure is built correctly and if called from a web browser the XML response is ok too.
I've checked LiveCycle log file - there's nothing there, the ws is not even being called.
Where should I look for error messages or other resources to aid me in identifying the problem?
Thank you very much for any hints!
Marcos

7520 All in one web services not working

I got notified of a new update for the 7520. When I tried to install it, the screen said it was successful but then said "updating....do not turn power off" and it freezes and the update never gets successfully installed and I have no web services. I tried reiinstalling the whole software package, restarted the printer multiple times and the router too and can't seem to find an answer. Anyone know what to do next?

bjg1,
Welcome to the HP Forum.
Assuming you can get to the point where you can get the software installed, you might be able to get Web Services back using the following workaround.
Suggested Workaround:
On the printer, Disable the web services -- that is, remove web services from the printer.
This may then allow you to then "Enable Web Services".
There is a consequence to this action: Your previously selected ePrint custom address will no longer be valid and cannot be reused. When you go back and log into your HP Connected account you may need to not only "add device" to re-add the printer to the device list of ePrint printers, you will have to select a new custom email address for that printer.
Where / how is this done?
Side Bar: The Disable Web services is usually done on the printer, although if the service is actually working, one can switch off EWS from EWS.
Disable EWS on the printer, wait a few seconds, and then Enable the service again.
Switching off EWS does not "break" your HP Connected account, although it does put a crimp in your printer's ePrint setup. You can still log into the HP Connected account where the printer and the ePrint account is managed. After EWS is disabled / enabled, you must log into your HP Connected account.
If you do not find your printer listed under the Devices tab, you can usually "add device" and add your printer right back into the list at this point.
If you do find your printer, but it won't cooperate, it won't update, you cannot "do" anything with it, go ahead and remove it.
If you have to "remove the printer", then Log out of HP Connected.
If you have to "remove the printer", then Walk around your house / office / back yard -- come back.
Log into HP Connected and use "Add device" to add your printer.
Update the ePrint email address to something new - add a number, think of something new and clever; it does not matter as long as the name is different.
Click the Kudos Thumbs-Up!
It is a nice way to say “Thank You" for the help.
Although I strive to reflect HP's best practices, I do not work for HP.
Kind Regards,
Dragon-Fur

Import Web Service not working

In the past I have successfully created a lvlib, to get Information from our ERP system (Dynamics NAV) via web service. I have used the LabVIEW import wizard for web services. Now we have exported another page of Dynamics NAV as a web service and I want to write a LabVIEW-Tool for this. But with a valid URL I get always an error
Validation failed. Possible Reasons are:
1. The URL does not exist or the WSDL is bad
2. Authentification is not OK
3. Proxy information is not correct.
I can communicate with a c# application. So, the reason must be in LabVIEW.
I have checked the import wizard again with the URL of my first first lvlib and the wizard gives the same error, but my lvlib is working well.
Regards
Dirk

Hello Dirk,
Which LabVIEW verison are you using? Depending on it I can propose you several solutions:
Have you take a look at this link? LabVIEW 2010: http://digital.ni.com/public.nsf/websearch/54DA5F6466B622A5862577BB0048E221?OpenDocument
I have this vi to fix your issue, but that was tested for LabVIEW 2010, you can try it with the version you are working with and keep me updated. I will send you a new file if needed.
Replace the attached VI file to have the fix. <LabVIEW 20xx>\vi.lib\Platform\WebService\Main Panel\Pages\Input WSDL\Main.vi
I hope this will solve your problem. Keep me posted!
Attachments:
Main.vi ‏38 KB

CF Web Services Not Working

We did a clean install of ColdFusion 8 and a new install of
Windows Server 2003 and IIS 6 and then moved the current site to
the new server. Since the move we have been unable to access any of
the previously working CF webservices through either Flex or CF.
The wsdls do display when entered into the browser
Flex is returning the following:
[RPC Fault faultString="HTTP request error"
faultCode="Server.Error.Request" faultDetail="Error: [IOErrorEvent
type="ioError" bubbles=false cancelable=false eventPhase=2
text="Error #2032:
If I try to add the web service in the CF Administrator I
get: Error creating web service. Please ensure that you have
entered a correct Web Service name or URL.
When running with the cfinvoke tag the following error is
received:
13:17:05.005 - Application Exception - in
D:\cf_web_root\dev\dgreen\wstest\wstest.cfm : line 13
coldfusion.jsp.CompilationFailedException: Errors reported
by Java compiler:
Found 1 system error:
*** Semantic Error: The input file
"C:/ColdFusion8/stubs/WS-1559093840/skidshop/invoices/common/cfcs/LOV.java"
was not found. That file actually does exist
Any suggestions would be appreciated

Hi,
Please check if there is a default proxy in your web.config. If so, try removing it and check.
<system.net>
<defaultProxy>
<proxy usesystemdefault="True" proxyaddress=http://127.0.0.1:8733 bypassonlocal="True" />
</defaultProxy>
If you are trying to connect SQL database, you will need to explicitly add a firewall rule with your local IP address
#Deploy a Secure ASP.NET MVC app with Membership, OAuth, and SQL Database to a Windows Azure Web Site
http://azure.microsoft.com/en-us/documentation/articles/web-sites-dotnet-deploy-aspnet-mvc-app-membership-oauth-sql-database/
Regards,
Mekh.

One of the Web Service not working

Hi All,
I have created a AIF for Posting Goods Receipt for a Purchase Order.
The form is using 2 web services: 1) for Getting the Purchase Order details, and 2) for posting the Goods Receipt for that PO.
The form was working absolutely fine for the Customer, i.e. customer was able to fetch the PO details as well as Post the Goods Receipt for that PO.
Then, based on the UAT comments from the customer, we did some minor changes in the function module correponding to the web service which fetches the PO details. We also did some script changes in the form.
After the deploying the changes, the Web service corresponding to Post Goods Receipt has stopped working for the Customer, though the other web service(PO Get Details) is still working fine for them. When the Customer clicks the Button on which the Post Goods Receipt web service is called, they get no response at all.
What is more surprising is that both the web services are still working fine for us(developers).
Please help.

Hi Chintan,
One of the fields on the form was mapped to the SAP field which was of length 16 characters.
If the user enters more than 16 charcters on the form....iTHe Web Service does nothing
I restricted the length to 16 on the form and it started working again

Web service not working

Hi all,
I created a webservice for a function module.
Note : already there was a group of function modules in the webservice. I have included recently developed function module in the same webservice.
In soamanager, this function module is existed. but when i test that function module in soamanager, it is throwing an error saying -
CX_SY_CONVERSION_NO_DATE_TIME:XSLT exception.An error occurred when deserializing in the simple transformation program /1BCDWB/WSS9F3FEB5B8A0EC491810.Value 01-04-2009 is not a valid date in accord with the XML format for ABAP
please guide me to solve this issue.
thanks and regards,
Murali Krishna T

Are you passing a date to the web service? Check out the type of the corresponding field, usually in the SOAP messages you have to stick to [ISO 8601|http://www.w3.org/TR/2004/REC-xmlschema-2-20041028/#isoformats] for date and time formats. This means that your date should be of form yyyy-mm-dd (see also the schema definition for the [date|http://www.w3.org/TR/2004/REC-xmlschema-2-20041028/#date] type).
Cheers, harald

Web service not responding

Hi,
Issue - Web service not responding when we deploye the .ear file in prod instance. Same web service working fine in test instance.
We are using Oracle Enterprise Manager 10g server.
It is urgent for us.
Thanks,

If it is urgent, call support. Besides, this is the wrong forum as this is for Sun Application Server related issues.

Lion Server DNS service not working for locally created zones. Caching working fine.

OS Lion Server DNS service not working for local zones. Was fine under Snow leopard server but Lion server upgrade has severely broken my DNS and web sites. Zones look fine under Server Admin but keep getting "query failed (SERVFAIL) for xxxx at /SourceCache/bind9/bind9-42/bind9/bin/named/query.c:3921" in the logs. BTW - Server Admin cant seem to see the log file either.
Surely someone actually tested that DNS still worked on Lion?

I upgraded from Snow Leopard Server to Lion Server on day 01. I hit the same issue where, after the upgrade, my Lion Server stopped serving names for my private local domain.
I finally took a few minutes to figure out what was wrong. After turning on debug logging and looking through the logs, I found my particular issue, now resolved.
The issue I had was, when the domain initially was setup when I installed Snow Leopard Server, for some reason it created a zone just for the server (in my case, something like zone "s-01.mydomain.priv"), and a separate zone for all the other machines (zone "mydomain.priv", containing all the private IPs for my local domain). I never messed with it because it worked, but generally I would have put all of them in the same zone.
My zone "mydomain.priv" had a nameserver and mail exchanger entry for my server, s-01.mydomain.priv. I could see this in the Server Admin app on the DNS bubble, Zones tab, mydomain.priv selected, and the General Info panel. This was fine in Snow Leopard. This was failing the zone load in the updated bind for Lion Server, though. The issue was that the "mydomain.priv" zone was referencing the s-01.mydomain.priv server, which was not defined in the "mydomain.priv" zone but rather in the "s-01.mydomain.priv" zone.
My fix:
1. In Server Admin, add the server to the zone "mydomain.priv". I put an A record (Add Machine) in the "mydomain.priv" zone for my server named s-01.mydomain.priv.
2. shut down DNS on the OS X Lion Server (hit the Stop DNS button on Server Admin).
3. edit /etc/named.conf by hand, removing the specialized zones that contianed just the server. In this case, it would be the section titled 'zone "s-01.mydomain.priv"' and the section titled 'zone "3.10.1.10.in-addr.arpa"'. Your in-addr.arpa zone name will change based on whatever your server IP address was. My internal one happened to have s-01.mydomain.priv mapped to 10.1.10.3.
4. Once the specialized zones for just the server were removed, I started the DNS up again. Instead of serving four zones as it had in OS X Snow Leopard Server, it now servers two zones. And, now, it is resolving my local machines for the mydomain.priv zone.
YMMV. I did note that it wasn't totally necessary to do step 3, but I never really understood the need for the specialized domain, and keeping it around would have a copy of data that would just confuse things.
Hope that helps. That's been the only hiccup I've noticed updating to OS X Lion Server thus far.

Flash player download web site not working

After uninstalling flash player, I can't get the web site to reinstall it. I go to the web site click the agree and install now and gos to the next page but nothing pops up like it said it should.
http://get.adobe.com/flashplayer/thankyou/activex/?installer=Flash_Player_10_for_Windows_I nternet_Explorer&i=McAfee_Security_Scan_Plus&d=Google_Toolbar_6.3

Hi eidnolb,
My OS is windows 7 Ultimate. There no Service packs listed Microsoft don't have one for it yet. My brower is Internet explorer 8 version: 8.0.7600.16385. My firewall is not causeing problems and the popup blocker didn't even activate.
Date: Wed, 14 Apr 2010 10:01:33 -0600
Subject: Flash Player flash player download web site not working
Hi newcomer76, Please post back your operating system and if any applicable Service Packs, any and all browsers that you use with the versions.
With that information, I'll be able to give you instructions and the links you need.
Thanks,
eidnolb
>

Invoking a web service not created using oracle web service lib

Hi All,
I have a need to invoke my web service from oracle sql command. My web service not created using oracle web service library, but it is created using axis c++ libraries. Is it possible to do so,
Thanks in advance,
Regards,
Monica

In order to call out from the database process, is SQL (or PL/SQL) you need to generate some client code, that understand the details about the specific of the service you want to invoke and can produce the correct SOAP request. Once this proxy is uploaded in the Database, you can use it.
There is a set of Database Web services samples that should help you get started. You can also take a look at the developer's guide - see Developing a Web Service Client in the Database.
Hope it answers your question.
--eric

Content Search Web Part not work for Office Web Apps

Hi ,
In Content Search Web Part word documents are not able to open in browser,but in document library its working.
Office Web Apps not work in Content search web part
Please help me
Regards
Sachin

Below is the display template to open the document in OWA.
<html xmlns:mso="urn:schemas-microsoft-com:office:office" xmlns:msdt="uuid:C2F41010-65B3-11d1-A29F-00AA00C14882">
<head>
<title>AdSpace Picture on top, 3 lines on bottom</title>

</head>
<body>

<script>
$includeLanguageScript(this.url, "~sitecollection/_catalogs/masterpage/Display Templates/Language Files/{Locale}/CustomStrings.js");
</script>

<div id="Item_PictureOnTop">

<div class="top-content-box" id="_#= containerId =#_" data-displaytemplate="ItemPictureOnTop">
<div class="top-content-img" id="_#= pictureContainerId =#_">
<a class="cbs-pictureImgLink" href="_#= $urlHtmlEncode(url) =#_" title="_#= $htmlEncode(line1) =#_" target="_blank" id="_#= pictureLinkId =#_">
_#= pictureMarkup =#_
</a>
</div>
<h3 id="_#= line1Id =#_"><a class="cbs-pictureOnTopLine1Link" target="_blank" href="_#= $urlHtmlEncode(url) =#_" title="_#= $htmlEncode(line1) =#_"
id="_#= line1LinkId =#_"> _#= line1 =#_ </a></h3>
<span class="content-date" title="_#= $htmlEncode(line2) =#_" id="_#= line2Id =#_"><img class="cbs-Thumbnail" src="_#= $urlHtmlEncode(iconURL) =#_"
alt="_#= $htmlEncode(line1.defaultValueRenderer(line1)) =#_" id="_#= pictureId =#_" />_#=line2=#_</span>
</div>
</div>
</body>
</html>
Basically,ctx.CurrentItem.ServerRedirectedURL is calculated by a managed property ServerRedirectedURL which needs to be included in the display template.
Problem solved.
Nehal Bhandari,ATL, Nagarro Softwares

Web links not working in iPhone calendar notes. Used to work. Ideas?

Web links not working in iPhone calendar notes. Used to work. Ideas?

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Has any of this been tried?

Web Services Not Working

Similar Messages

Maybe you are looking for