Web Services Setup - Failed

hey am using DJ 3050A...am not able to enable the webservice...as it always say try again...
I have checked both with the Automatic and Manual Ip settings its not working.
when i print the wireless network test report it says:
wireless = PASS
connectivity = PASS
Network = PASS
settings = PASS
SO WHERE IS THE PROBLEM...YOUR EARLY HELP WILL BE APPLAUDED.

Hello Anwer,
Sorry to hear you are having issues with he printer. Before giving an answer I will need a little more information.
1. Was it working before now or is this the initial set up?
2 What is the make and model of your router?
One step i can suggest is to change the settings back to automatic IP save and then reboot the printer and try again.
You can try this first and if it does not work reply back to above question.
Thanks
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

Similar Messages

Rt web services deployment failed

I have a sbrio 9612 that I setup with an executable and web services. I can get it to run great. I then took an image of that one (using RAD) and deployed it to another sbrio 9612. The web services don't work. I then tried to deploy webservices the second sbrio with my project, and I came up with the error in the attached picture: Web Services Deployment Failed. The NI Application Web Server is still loading.
All I can find about that is issues when deploying to a laptop with a wifi card, but nothing about that with a RT unit.
Any thoughts?
Thanks,
Eric.
Attachments:
error.jpg ‏83 KB

I have redeployed the firmware several times and it still doesn't work. It works on the original unit I took the image from, but not on the unit I'm deploying the image to. Using max is not an option because these are basically in an OEM environment and if I distribute an image to a customer they will not have national instruments installed.
Besides, that defeats the purpose of taking an image, if it works correctly in one place, you should be able to take an image of that and deploy it on another unit.

SharePoint SiteMialbox failed with 503 error (AutoDiscover.svc web service call failed)

SharePoint SiteMialbox failed with 503 error (AutoDiscover.svc web service call failed)
I followed Technet articles to configure SiteMailBoxes in our environment & exchange sever.
When we created Sitemailbox in a SiteCollection &when we try to open it, it failed with below error.
Site Mailbox
We are having trouble connecting to Exchange Server
The server might be temporarily unavailable. Please check back on this page in a few minutes. If this problem persists, please contact your system administrator.
Correlation ID: bb0fe99c-6f4e-e084-b191-881fbf0fa977, Error Code 10
ULS Log (503 error)
Autodiscover Diagnostics Response Headers: request-id: 95d12ceb-283e-4495-b28b-256503fd097c client-request-id: 742fe69c-ef5a-e084-ca05-6098c759c584 X-CalculatedBETarget: devapwxyz01a.devap.mydomain.com X-FEServer: DEVNAABCD01B
Content-Length: 0 Cache-Control: private Date: Tue, 03 Feb 2015 18:53:40 GMT Set-Cookie: X-BackEndCookie=; expires=Sun, 03-Feb-1985 18:53:40 GMT; path=/autodiscover; secure; HttpOnly Server: Microsoft-IIS/8.5 X-AspNet-Version:
4.0.30319 X-Powered-By: ASP.NET
742fe69c-ef5a-e084-ca05-6098c759c584
if I am correct, X-CalculatedBETarget supposed to be DEVNAABCD01B.devna.mydomain.com but it connected to different domain devapwxyz01a.devap.mydomain.com. Do you guys have any idea on this? (I verified
the same using fiddler, it is failing right at autodiscover.svc call.)
I wrote a powershell script to connect autodiscover service in sharepoint server & this web service call able connect right server X-CalculatedBETarget. It gave the expected response.
I am not sure why SharePoint webservice call (X-CalculatedBETarget) is going to different server?
let me know if you guys have any ideas.
Thanks.

Thanks for the Response Raj.
I already followed the same instructions in the Links.
When SharePoint Autodisover.svc webservice send a request to Exchange server & Exchange server redirecting that request to different server, this is the problem i am facing right now.
X-CalculatedBETarget
supposed to be DEVNAABCD01B.devna.mydomain.com but it connected to different domain devapwxyz01a.devap.mydomain.com.
Let me know if you have any suggestions?

Web Service Request Failed

Hello,
Errors in the EE 4 with RedHat ES 3.
Web Service Request Failed
The following fault was returned from the web service call:
Code HTTP
String (404)/axis/services/rpc/webtopsession
------ log -----
Starting service Tomcat-Standalone
Apache Tomcat/4.1.29
Apr 15, 2005 12:26:03 PM org.apache.jk.common.ChannelSocket init
INFO: JK2: ajp13 listening on /0.0.0.0:8009
Apr 15, 2005 12:26:03 PM org.apache.jk.server.JkMain start
INFO: Jk running ID=0 time=0/86 config=null
AxisFault
faultCode: {http://xml.apache.org/axis/}HTTP
faultSubcode:
faultString: (404)/axis/services/rpc/webtopsession
faultActor:
faultNode:
faultDetail:
{}string: return code: 404
<html><head><title>Apache Tomcat/4.1.29 - Error
report</title><STYLE></STYLE>
</head><body><h1>HTTP Status 404 -
/axis/services/rpc/webtopsession</h1><HR size="1"
noshade><p><b>type</b> Status
report</p><p><b>message</b>
<u>/axis/services/rpc/webtopsession</u></p><p><b>description</b>
<u>The requested resource (/axis/services/rpc/webtopsession) is not
available.</u></p><HR size="1"
noshade><h3>Apache
Tomcat/4.1.29</h3></body></html>
(404)/axis/services/rpc/webtopsession
at
org.apache.axis.transport.http.HTTPSender.readFromSocket(HTTPSender.java:630)
at org.apache.axis.transport.http.HTTPSender.invoke(HTTPSender.java:128)
at
org.apache.axis.strategies.InvocationStrategy.visit(InvocationStrategy.java:71)
at org.apache.axis.SimpleChain.doVisiting(SimpleChain.java:150)
at org.apache.axis.SimpleChain.invoke(SimpleChain.java:120)
at org.apache.axis.client.AxisClient.invoke(AxisClient.java:180)
at org.apache.axis.client.Call.invokeEngine(Call.java:2564)
at org.apache.axis.client.Call.invoke(Call.java:2553)
at org.apache.axis.client.Call.invoke(Call.java:2248)
at org.apache.axis.client.Call.invoke(Call.java:2171)
at org.apache.axis.client.Call.invoke(Call.java:1691)
at
com.tarantella.tta.webservices.client.apis.apache.BaseRequest.callServiceWork(BaseRequest.java:316)
at
com.tarantella.tta.webservices.client.apis.apache.BaseRequest.callService(BaseRequest.java:213)
at
com.tarantella.tta.webservices.client.apis.apache.BaseRequest.callService(BaseRequest.java:205)
at
com.tarantella.tta.webservices.client.apis.apache.WebtopSessionRequest.startSession(WebtopSessionRequest.java:62)
at
com.tarantella.tta.webservices.client.views.SessionBean.startSession(SessionBean.java:545)
at
org.apache.jsp.sessionmanager_jsp.createNewSession(sessionmanager_jsp.java:276)
at
org.apache.jsp.sessionmanager_jsp.joinSessionByClientId(sessionmanager_jsp.java:236)
at
org.apache.jsp.sessionmanager_jsp._jspService(sessionmanager_jsp.java:619)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:137)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at
org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:210)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:295)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:241)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at
org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:684)
at
org.apache.catalina.core.ApplicationDispatcher.doInclude(ApplicationDispatcher.java:575)
at
org.apache.catalina.core.ApplicationDispatcher.include(ApplicationDispatcher.java:498)
at
org.apache.jasper.runtime.JspRuntimeLibrary.include(JspRuntimeLibrary.java:822)
at org.apache.jsp.index_jsp._jspService(index_jsp.java:483)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:137)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at
org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:210)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:295)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:241)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at
org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:247)
at
org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:193)
at
org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:256)
at
org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
at
org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
at
org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
at
org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
at
com.tarantella.tta.webservices.valves.InputFilter.invoke(InputFilter.java:74)
at
org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:641)
at
org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
at
org.apache.catalina.core.StandardContext.invoke(StandardContext.java:2417)
at
org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:180)
at
org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
at
org.apache.catalina.valves.ErrorDispatcherValve.invoke(ErrorDispatcherValve.java:171)
at
org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:641)
at
org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:172)
at
org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:641)
at
org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
at
org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:174)
at
org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
at
org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
at org.apache.coyote.tomcat4.CoyoteAdapter.service(CoyoteAdapter.java:193)
at org.apache.jk.server.JkCoyoteHandler.invoke(JkCoyoteHandler.java:309)
at org.apache.jk.common.HandlerRequest.invoke(HandlerRequest.java:387)
at org.apache.jk.common.ChannelSocket.invoke(ChannelSocket.java:673)
at
org.apache.jk.common.ChannelSocket.processConnection(ChannelSocket.java:615)
at org.apache.jk.common.SocketConnection.runIt(ChannelSocket.java:786)
at
org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:666)
at java.lang.Thread.run(Thread.java:534)

Hello,
We have same problem on SGD4.2 on Solaris 10 with IE HTML Client.
Do you solve it ?
How ?
Please help.
Regards.

Web Service execution failed for operation: ReadLogFile

Hello,
im getting the following error message in almost all of my Diagnostic Agent log files:
[MAIJobObserver] ERROR occurred for metric collection
00000000000000000019[com.sap.smd.mai.model.collector.SAPControlWSCollector].
[EXCEPTION]
com.sap.smd.mai.model.collector.CollectorException:
[SAPControlWSCollector.collect] Web Service execution failed for operation:
ReadLogFile. Collector : [SAPControlWSCollector]
Id: 00000000000000000019,
SID: EPX, instance number:00
at
com.sap.smd.mai.model.collector.SAPControlWSCollector.collect(SAPControlWSCollector.java:200)
at
com.sap.smd.mai.job.MetricJobRunner.run(MetricJobRunner.java:25)
at
com.sap.smd.server.exec.TaskRunner.run(TaskRunner.java:46)
at
com.sap.smd.server.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:785)
at
java.lang.Thread.run(Thread.java:722)
Caused by: java.rmi.RemoteException:
Service call exception; nested exception is:
com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException:
Invalid Response Code: (401) Unauthorized. The requested URL
was:http://<hostname>:50013/SAPControl.cgi
I checked on SAP note 1563660 - sapcontrol, <sid>adm authorization issues (SUM) and confirmed, that ALL installations of the "sapuxuserchk" program are set with "chown root.sapsys" and "chmod u+s,o-rwx". I restarted the diagnostic Agent aftwards.
I also checked on host_profile an made sure, that the parameter "service/admin_users = daaadm" is set.
Still I get the above error messages, so I am at a loss what else to do...
A lot of thanks for your Support !
Best regards,
Thorsten

Hi Thorsten,
Please check the user used for registration of Diagnostic agent to Solution Manager has appropriate roles assigned (e.g. user SMD_ADMIN)
Also please update to latest patch of SAP Host agent and then try again.
Hope this helps
Thanks & Regards,
Nisha

Active Directory Certificate Services setup failed with the following error: Overlapped I/O operation is in progress. 0x800703e5 (WIN32: 997)

Hi,
I am trying to install certificate services on a windows 2008 server (R2 ENT SP1) with a PCIe nCipher HSM module installed on it. The version of nCipher SW is = 11.30. It is a RootCA, and I am trying to use a key that is already stored in the HSM (I
have done this before with a PCI HSM (older HW version)). I select “Use existing private key” and “Select an existing private key on this computer” on the wizard, then i change the CSP to nCipher and click on "search" the key I am looking for
appears and I select that one. I repeat, I have done this before and it works with a PCI HSM module.
The installation is finished before being prompted to insert the operator cards, and it ends with two errors:
<Error>: Active Directory Certificate Services setup failed with the following error: Overlapped I/O operation is in progress. 0x800703e5 (WIN32: 997)
And:
<Error>: Active Directory Certificate Services setup failed with the following error: The group or resource is not in the correct state to perform the requested operation.
0x8007139f (WIN32: 5023)
The servermanager.log says:
1856: 2014-07-23 18:27:48.195 [CAManager] Sync: Validity period units: Years
1856: 2014-07-23 18:27:48.928 [Provider] Error (Id=0) System.Runtime.InteropServices.COMException (0x800703E5): CCertSrvSetup::Install: Overlapped I/O operation is in progress. 0x800703e5 (WIN32: 997)
at Microsoft.CertificateServices.Setup.Interop.CCertSrvSetupClass.Install()
at Microsoft.Windows.ServerManager.CertificateServer.CertificateServerRoleProvider.Configure(InstallableFeatureInformation featureInfo, DiscoveryResult discoveryResult, ChangeTracker changeTracker)
1856: 2014-07-23 18:27:48.928 [Provider] CAErrorID: 0, CAErrorString: 'Active Directory Certificate Services setup failed with the following error: Overlapped I/O operation is in progress.
0x800703e5 (WIN32: 997)'
1856: 2014-07-23 18:27:48.928 [Provider] Adding error message.
1856: 2014-07-23 18:27:48.928 [Provider] [STAT] For 'Certification Authority':
And:
1856: 2014-07-23 18:27:49.053 [CAWebProxyManager] Sync: Initializing defaults
1856: 2014-07-23 18:27:49.162 [Provider] Error (Id=0) System.Runtime.InteropServices.COMException (0x8007139F): CCertSrvSetup::Install: The group or resource is not in the correct state to perform the requested operation. 0x8007139f (WIN32: 5023)
at Microsoft.CertificateServices.Setup.Interop.CCertSrvSetupClass.Install()
at Microsoft.Windows.ServerManager.CertificateServer.CertificateServerRoleProvider.Configure(InstallableFeatureInformation featureInfo, DiscoveryResult discoveryResult, ChangeTracker changeTracker)
1856: 2014-07-23 18:27:49.162 [Provider] CAErrorID: 0, CAErrorString: 'Active Directory Certificate Services setup failed with the following error: The group or resource is not in the correct
state to perform the requested operation. 0x8007139f (WIN32: 5023)'
1856: 2014-07-23 18:27:49.162 [Provider] Adding error message.
Has anyone experienced this before? Am I missing something here?
Any help will be very appreciated
Thanks in advance
Best regards
Alejandro Lozano Villanueva

Hi, thanks for your support.
I have been playing around a bit with some ncipher commands and found this:
C:\Program Files (x86)\nCipher\nfast\bin>cspcheck.exe
cspcheck: fatal error: File key_mscapi_container-1c44b9424a23f6cddc91e8a065241a0
9aa719e4f (key #1): 0 modules contain the counter (NVRAM file ID 021c44b9424a23f
6cddc91)
cspcheck: information: 2 containers and 2 keys found.
cspcheck: fatal error occurred.
If I perform the same command on the original server (the server with the original kmdata folder and with the running RootCA services):
E:\nfast\bin>cspcheck.exe
cspcheck: information: 2 containers and 2 keys found.
cspcheck: everything seems to be in order.
Strange?
Moreover, when I do a csptest.exe command (also on both servers, i find this)
On the new server:
C:\Program Files (x86)\nCipher\nfast\bin>csptest.exe
nCipher CSP test software
=========================
Found the nCipher domestic CSP named 'nCipher Enhanced Cryptographic Provider'
Provider name: nCipher Enhanced Cryptographic Provider
Version number: 1.48
User key containers:
Container 'csptest.exe' has no stored keys.
Container 'Administrator' has no stored keys.
Machine key containers:
Container '352dd28a-17cb-4c6f-b6e4-bf39bcf75db5' has a 2048-bit signature key.
Container 'ROOTCA' has no stored keys.
Container 'csptest.exe' has no stored keys.
While in the old server:
E:\nfast\bin>csptest.exe
nCipher CSP test software
=========================
Found the nCipher domestic CSP named 'nCipher Enhanced Cryptographic Provider'
Provider name: nCipher Enhanced Cryptographic Provider
Version number: 1.40
User key containers:
Container 'csptest.exe' has no stored keys.
Machine key containers:
Container '352dd28a-17cb-4c6f-b6e4-bf39bcf75db5' has a 2048-bit signature key.
Container 'ROOTCA' has a 2048-bit signature key.
Container 'csptest.exe' has no stored keys.
As you can see, the container called ROOTCA, which is the one that I use during the installation, says it has no stored keys. While on the old server, it says it contains a key. Why is this happening? I dont know, I am copying the complete
key management folder from one server to another and initialize the security world with that folder as I always do, and i dont have any errors during this procedure.
Do you know what could be the cause of this? or how can I fix this? Thanks a lot, best regards.
Alejandro Lozano Villanueva

My problem about SGD-- Web Service Request Failed

Web Service Request Failed
The following fault was returned from the web service call:
Code Server.NoService
String The AXIS engine could not find a target service to invoke! targetService is rpc/webtopsession

my SGD's viasion is 4.3.15
my plam is suse linux

Boot camp services setup failed - Boot camp 3.3 update

Running Windows 7 Ultimate on a 2008 iMac with boot camp 3.2. When running apple update to install boot camp 3.3, after a reboot I get the following message from the installer: Boot Camp Services Setup Failed.
Sorry, After I posted I found the answer. I also had a logmein display driver and once uninstalled boot camp 3.3 installed just fine.

The BC Service is installed for any individual login (whether local or domain-based), which happens only the first time. The BC Driver Installer has no option to install the services for 'All Users'. This is expected behavior.
The two-finger click is a separate issue. Can you try
Resetting the System Management Controller (SMC) on your Mac - Apple Support
How to Reset NVRAM on your Mac - Apple Support

Web services randomly fail to deploy properly in OC4J

I have an ear with around 15 services, and sometimes (today, all the time, other times, not at all) some of the services fail to deploy correctly in that when I come to access them I get one of the following (the service that fails is generally different so the below is just an example):
2009-07-07 15:06:16.633 WARNING OWS-03005 Unable to connect to URL: http://local
host:8888/democustomer/CimsImageService due to java.security.PrivilegedActionExc
eption: oracle.j2ee.ws.saaj.ContentTypeException: Not a valid SOAP Content-Type:
text/html
OR
2009-07-07 15:06:16.711 ERROR OWS-04005 An error occurred for port: {http://serv
ices.cims.prologic.com/}CimsCategoryService: javax.xml.rpc.JAXRPCException: Erro
r loading Tie: com.prologic.cims.services.runtime.CimsCategoryWebServiceSoapHttp
_Tie.
Missing class: com.prologic.cims.services.runtime.CimsCategoryWebServi
ceSoapHttp_Tie
Dependent class: oracle.j2ee.ws.server.J2EEImplementor
Loader: oc4j:10.1.3
Code-Source: /C:/oc4j/webservices/lib/wsserver.jar
Configuration: <code-source> in META-INF/boot.xml in C:\oc4j\j2ee\home
\oc4j.jar
This load was initiated at democustomer.web.democustomer:0.0.0 using the loadCla
ss() method.
The missing class is not available from any code-source or loader in the system.
If I redeploy it often, but not always, sorts the problem out so it is not a source code issue and I guess, possibly not a deployment descriptor problem for the same reason.
I'm running on OC4J 10.1.3.1 (we need to run with this version for now).
I get the same problem very occasionally on Linux 10.1.3.n but it's rare.
Anyone out there seen this before ? It's becoming very irritating.

idris, the only workaround I have found is to check at container startup that each service was deployed ok, by making a call to a serviceAvailable method. That way, if I restart OC4J after a deployment I see log messages if all was not well (and in fact I can specify that the container shouldn't start if the service failed)
Class oracle.j2ee.server.OC4JStartup is the one you want and insert something like into server.xml after the cluster element (the jar conmtaining your code needs to be in the applib directory too):
     <init-library path="../applib/startupshutdown.jar" /> 
<startup-classes>
<startup-class classname="com.prologic.cms.services.StartupServer" failure-is-fatal="true" >
<execution-order>0</execution-order>
               <init-param>
                    <param-name>TestServices</param-name>
                    <param-value>true</param-value>
               </init-param>
               <init-param>
                    <param-name>deployment.port</param-name>
                    <param-value>7777</param-value>
               </init-param>
               <init-param>
                    <param-name>ASwitchToPassIn</param-name>
                    <param-value>true</param-value>
               </init-param>
               <init-param>
                    <param-name>SearchIndexRebuild</param-name>
                    <param-value>true</param-value>
               </init-param>
               <init-param>
                    <param-name>waitfor</param-name>
                    <param-value>50000</param-value>
               </init-param>
               <init-param>
                    <param-name>language</param-name>
                    <param-value>en</param-value>
               </init-param>
               <init-param>
                    <param-name>locale</param-name>
                    <param-value>UK</param-value>
               </init-param>
</startup-class>
</startup-classes>

Web service Call failed

Hi,
When I try to post some messages to Web service, Follwing Error displayed is the Receiver SOAP communication channel,
No description available except the following message
Requet entering and Call failed.
What could be the problem?
How can test the connectivities between XI server and Web server?
Edited by: Prabu M on Jul 30, 2008 9:11 AM

Hi,
Just check the link. This describes the step by step method for webservice to file. May be it will be helpful for you.
RFC -> XI -> WebService - A Complete Walkthrough (Part 1) -
RFC-Webservice Part1
RFC -> XI -> WebService - A Complete Walkthrough (Part 2) -
RFC-Webservice Part2
Regards,
Nutan

Web service call failed using WCF

Hi,
I generated a proxy with WCF and call web service 2.0. The soap message sent is:
<s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/">
<s:Header>
<wsse:Security xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd" s:mustUnderstand="1">
<wsse:UsernameToken>
<wsse:Username>username</wsse:Username>
<wsse:Password Type="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wssusername-token-profile-1.0#PasswordText">passwd</wsse:Password>
</wsse:UsernameToken>
</wsse:Security>
</s:Header>
<s:Body xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<PicklistWS_GetPicklistValues_Input xmlns="urn:crmondemand/ws/picklist/">
<FieldName>AccountType</FieldName>
<RecordType>Account</RecordType>
</PicklistWS_GetPicklistValues_Input>
</s:Body>
</s:Envelope>
It failed with 400 - Bad request.
Can someone tell me what's wrong here?
Thanks

Hello,
It looks like you have a typo in your the Type value in the Password element:
<wsse:Password Type="http://docs.oasis-open.org/wss/2004/01/oasis-200401-*wssusername*-token-profile-1.0#PasswordText">passwd</wsse:Password>
should be
<wsse:Password Type="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText">passwd</wsse:Password>
The error message returned by CRMOD is:
<?xml version="1.0" encoding="UTF-8"?><soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/"><soap:Body><soap:Fault><faultcode>soap:Client</faultcode><faultstring>Client</faultstring><detail><ErrorCode>SBL-ODU-01008</ErrorCode><ErrorMessage>The HTTP request did not contain well-formed XML. An attempt to parse it produced the following error: Unsupported wsse:Password Type. Valid Value: http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText</ErrorMessage></detail></soap:Fault></soap:Body></soap:Envelope>
Hope this helps.
Thanks,
Sean

Fusion Apps web service call fails with error access denied (oracle.wsm.security.WSFunctionPermission)

Hello Guru,
I am trying to call a supplier service from SOA/OSB.
But while calling the service it is failing with the below error message
access denied (oracle.wsm.security.WSFunctionPermission http://xmlns.oracle.com/apps/prc/poz/suppliers/supplierService/SupplierService#getSupplierVO invoke)
As per OER cookbook i have attached the "oracle/wss_username_token_client_policy" to the Fusion apps web service.
I am trying to pass security credentials to the service by using all the methods... through composite ..through bpel through wsse header but in all cases i am getting similar error.
Please let me know if some one has called the fusion apps web service to create a supplier of solution to my problem as mentioned above.

Hi Sai,
Thanks for the quick and correct response. Yes, after doing the research, I'm also came to same conclusion. But what stops me here is that where exactly I need to check for this permission.
I mean the theory what I built on this Authorization/Permission is that:
For the resource - WebService (SupplierService), there is an assigned application role for which the Entitlement/Permission is provided.
Pls. help me in the below items:
a. What is the application role(in role hierarchy) assigned to this resource(Webservice). Which page I need to check(navigation) this and the required credentials..
b. What is the Entitlement provided for this application role for this operation (getSupplierVO) invoke.. Which page I need to check(navigation) this and the required credentials..
Thanks in Advance.
Thanks & Regards
Madhu

FusionApps web service call fails with error access denied (oracle.wsm.security.WSFunctionPermission)

Hi Gurus,
I started test this webservice from EM (Test Web Service)
But while calling the service it is failing with the below error message
access denied (oracle.wsm.security.WSFunctionPermission http://xmlns.oracle.com/apps/prc/poz/suppliers/supplierService/SupplierService#getSupplierVO invoke)
As per OER cookbook i have attached the "oracle/wss_username_token_client_policy" to the Fusion apps web service.
I am trying to pass security credentials to the service by using all the methods... through composite ..through bpel through wsse header but in all cases i am getting similar error.
Please let me know if some one has called the fusion apps web service to create a supplier of solution to my problem as mentioned above.
Is it any policy error or the authorization error ...
Are there any navigation steps I can check the existed permission on this resource etc..,
Thanks in Advance

Hi Sai,
Thanks for the quick and correct response. Yes, after doing the research, I'm also came to same conclusion. But what stops me here is that where exactly I need to check for this permission.
I mean the theory what I built on this Authorization/Permission is that:
For the resource - WebService (SupplierService), there is an assigned application role for which the Entitlement/Permission is provided.
Pls. help me in the below items:
a. What is the application role(in role hierarchy) assigned to this resource(Webservice). Which page I need to check(navigation) this and the required credentials..
b. What is the Entitlement provided for this application role for this operation (getSupplierVO) invoke.. Which page I need to check(navigation) this and the required credentials..
Thanks in Advance.
Thanks & Regards
Madhu

Javascript web service calls fail after 10.1.5/11.0.01 updates

* Update #2 - I've confirmed that we are seeing errors because the HTTP request is being made as a POST using 10.1.5/11.0.01 in Chrome/Firefox/Safari. Accessing the same file in IE, the request is made using a GET. Using Reader 9.5.0 in Chrome also uses a GET. Can someone please explain why the HTTP request is being submitted as a POST following the 10.1.5 update?
* Update - I have found in my web service log that it is failing with a message that the attempted POST method is not allowed. Could the Reader updates be causing this call to be made as a POST when it was previously a GET?
I am using PDFs with Reader Extensions enabled that make web service calls via javascript. These calls have been working correctly in multiple environments for months and only began failing with the latest updates. After the latest Reader updates, these calls fail when using Chrome, Firefox and Safari.
Internet Explorer works correctly. Saving files locally and opening them in Reader also works correctly. It is only running 10.1.5 or 11.0.01 in these specific browsers where this issue occurs. 10.1.4 and 11.0.0 do not experience this issue in any browsers.
I have tried disabling Enhanced Security and updating Trust Manager to allow Internet Access from PDFs. Neither change corrected the problem.
Can someone tell me what may have changed in 10.1.5/11.0.01 that would cause these calls to start failing?
The javascript at issue looks like this:
var serviceKeyResult.rawValue = Get(serviceKeyUrl)
The error we get is "Error: Error attempting to read from file: {URL}"

Thanks for pointing that out. The javacript was implemented by a third party, so I was not aware that the function wasn't part of the standard APIs. I'll get more detail on what is happening inside that method.
For now we have updated our web services to accept both a GET and a POST to avoid this issue.

Web Service consumption fails in BPM

Hi,
I am new in the BPM and trying to create some demo applications using the tutorials from SDN.
I have created a BPM process and import a web service in that for an automated activities.
During execution the web service fails and giving the the following error.
"Unable to generate configuration data - The service group might not registered with the provider system".
I've tested the web service is running fine from the web service navigator.
I am using CE7.1.
Regards
Indra

Hi Indra ,
You should assign a service group for the automated activity in your process. Click on the automated activity in the design time and goto properties tab and select "Interface". There you can create a new service group. This should fix the error you are getting.
Regards,
Rohit

Web Services Setup - Failed

Similar Messages

Maybe you are looking for