Web services wont work no matter what i do

got a new laserjet MFP M127FW and everything thus far works except eprint.
IF i can get it to enable, it only does so after i reboot (power cycle) the printer.
if i try and enable it via the web management it will never say it was enabled, it just clocks (spinning icon that says connecting)
then SOMETIMES the web interface will say its enabled and SOMETIMES i can see the randomly generated email it gives me, BUT it only lasts for about 5 minutes then Web Services disables itself again.
i have forwarded everyport listed in this forum and the how to created by someone here.
I have even put the printer in the DMZ - still doesnt work.
N-O-T-H-I-N-G is making Web services work... period.
I have flashed the firmware to the latest (did that right out of the box)
there is nothing left for me, as the user to do... eprint/web services is broken. period.
i saw someone state that the code that is supposed to print is the name in the randomly generated email you are given.
and i tried to use that to register the unit on hpconnect but it just says "unexpected error"
also when i try to do things from the lcd screen, such as print information sheet, enable/disable web services, view email, it just clocks (never ending spinning icon.. i left it like that overnight and it never stopped.
IF i am fast enough and see the randomly generated email in the Web GUI, and then try to use the LCD to print the code, or do anything aside from via email, (which it does display if the web gui shows it) it says the services are unavailable
once again, i have spent the last 2 days, totalling over 10 hours trying to make this work and IF it is enabled, i think it is just a false positive, even though the random email does display it doesnt work and then within 5 minutes, web services disables itself again.
I am not some average user, i am a 20yr veteran of PC/MAC/Networking, and i have never seen a printer do this that wasnt flat out broken.
but since this is the only thing not working, thus far, i believe it to simply be a firmware issue.
lastly.... when trying to enable the web services the NIC lights on the back of the printer are blinking 100% nonstop, forever and ever.. until i power cycle it.
its as if the web services is locked up or stuck in a loop.
also restore defaults from the LCD or web GUI doesnt do anything... nothing is changed... and i am never presented with the initial startup like one would expect.
is there a way to force the printer to an out of the box state where it flushes anything and everything back to a factory state? (where i have to go through the initial setup again ?
p.s.
network settings are fine, i can print to the printer from ipads, iphone, pc's and 2 MAC's.. so everything on the network side works... just not Web services
This question was solved.
View Solution.

I was able to talk to a fantastic tech in cloud services who remembered a nun documented fix
USE THE LEVEL 3 DNS SERVERS!!! No other DNS servers will work
This literally within 10 seconds made HP Web Services work!!!!
209.244.0.3
209.244.0.4
I Switched my entire network to this
Huge kudos to cloud services!!!

Similar Messages

My ipod touch 5g home button wont work no matter what i try!

Ive tried everything apple said to do and all the concepts, like rubbing alcohol! im not sure what to do. Please help!

Try:
http://snapguide.com/guides/calibrate-your-home-button/?utm_expid=69945963-15
fix for Home button
iPhone Home Button Not Working or Unresponsive? Try This Fix
- If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
You can do it at an Apple store by making an appointment:
Apple Retail Store - Genius Bar
or send it in to Apple. See:
Service Answer Center - iPod
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

IMessage wont work no matter what I try. HELP!!

Hi. I recently got a new iphone 5s as an upgrade from my old 4s. I cant get my iMessage to turn or facetime to work. I have tried resetting network settings and also using apple id for facetime and imessage but the same message pops up "An error occurred during activation. Try again." I have also contacted my network provider (Vodaphone) but they are still not able to help me and say that this is a fault at apples end....??. Can anybody help me with this issue? Many thanks.

There are many threads on this forum by people with the same issue. If you look over here on the right ---> at the "More like this" box, you can find them and possibly see some solutions that have worked for others. Best of luck to you.

Web Services wont start, please help

Hello all,
I appologize up front but I dont really have a lot of experience with OSX server. So yesterday I got a report that my companied website was down. I went in to check the server and it wouldnt log in just got the pinwheel for about 10 minutes so we rebooted it (me and my IT staff). Upon reboot we could login and all seems well except that the web services wont start and our website is still down. when you try and start the service you get:
" A service has encountered and error, Try to refresh the view (172.18.180.15/Web). Report the problem to the administrator if it persists. (could not start web service - details in error log)."
but when you go to the log to see what is going on the last entry says:
" [Thu Jan 15 14:47:27 2009] [error] [client 172.18.180.15] File does not exist: /Library/WebServer/Documents/error.html "
that is about the time that the website appears to have gone offline... Also after navigating to the directory it says, there indeed is no error.html but all other files appear to be there. I have also used the terminal to read the last 100 lines of the error log file using tail -100 /var/log/httpd/error_log and get:
[Thu Jan 15 10:13:22 2009] [error] [client 172.18.180.15] File does not exist: /Library/WebServer/Documents/rc/bin/msgimport
[Thu Jan 15 10:13:22 2009] [error] [client 172.18.180.15] File does not exist: /Library/WebServer/Documents/error.html
[Thu Jan 15 10:13:22 2009] [error] [client 172.18.180.15] File does not exist: /Library/WebServer/Documents/roundcube/bin/msgimport
[Thu Jan 15 10:13:22 2009] [error] [client 172.18.180.15] File does not exist: /Library/WebServer/Documents/error.html
[Thu Jan 15 10:13:22 2009] [error] [client 172.18.180.15] File does not exist: /Library/WebServer/Documents/webmail/bin/msgimport
[Thu Jan 15 10:13:22 2009] [error] [client 172.18.180.15] File does not exist: /Library/WebServer/Documents/error.html
[Thu Jan 15 10:14:49 2009] [error] [client 172.18.180.15] File does not exist: /Library/WebServer/Documents/HNAP1/
[Thu Jan 15 10:14:49 2009] [error] [client 172.18.180.15] File does not exist: /Library/WebServer/Documents/error.html
[Thu Jan 15 10:14:52 2009] [error] [client 172.18.180.15] File does not exist: /Library/WebServer/Documents/TEADevInfo/
[Thu Jan 15 10:14:52 2009] [error] [client 172.18.180.15] File does not exist: /Library/WebServer/Documents/error.html
[Thu Jan 15 10:28:27 2009] [error] [client 172.18.180.15] File does not exist: /Library/WebServer/Documents/favicon.ico
[Thu Jan 15 10:28:27 2009] [error] [client 172.18.180.15] File does not exist: /Library/WebServer/Documents/error.html
[Thu Jan 15 10:32:17 2009] [error] [client 172.18.180.15] File does not exist: /Library/WebServer/Documents/favicon.ico
[Thu Jan 15 10:32:17 2009] [error] [client 172.18.180.15] File does not exist: /Library/WebServer/Documents/error.html
[Thu Jan 15 10:32:55 2009] [error] [client 172.18.180.15] File does not exist: /Library/WebServer/Documents/favicon.ico
[Thu Jan 15 10:32:55 2009] [error] [client 172.18.180.15] File does not exist: /Library/WebServer/Documents/error.html
[Thu Jan 15 10:32:57 2009] [error] [client 172.18.180.15] File does not exist: /Library/WebServer/Documents/favicon.ico
[Thu Jan 15 10:32:57 2009] [error] [client 172.18.180.15] File does not exist: /Library/WebServer/Documents/error.html
[Thu Jan 15 10:34:56 2009] [error] [client 172.18.180.15] File does not exist: /Library/WebServer/Documents/HNAP1/
[Thu Jan 15 10:34:56 2009] [error] [client 172.18.180.15] File does not exist: /Library/WebServer/Documents/error.html
[Thu Jan 15 10:34:59 2009] [error] [client 172.18.180.15] File does not exist: /Library/WebServer/Documents/TEADevInfo/
[Thu Jan 15 10:34:59 2009] [error] [client 172.18.180.15] File does not exist: /Library/WebServer/Documents/error.html
[Thu Jan 15 10:55:02 2009] [error] [client 172.18.180.15] File does not exist: /Library/WebServer/Documents/HNAP1/
[Thu Jan 15 10:55:02 2009] [error] [client 172.18.180.15] File does not exist: /Library/WebServer/Documents/error.html
[Thu Jan 15 10:55:05 2009] [error] [client 172.18.180.15] File does not exist: /Library/WebServer/Documents/TEADevInfo/
[Thu Jan 15 10:55:05 2009] [error] [client 172.18.180.15] File does not exist: /Library/WebServer/Documents/error.html
[Thu Jan 15 11:15:10 2009] [error] [client 172.18.180.15] File does not exist: /Library/WebServer/Documents/HNAP1/
[Thu Jan 15 11:15:10 2009] [error] [client 172.18.180.15] File does not exist: /Library/WebServer/Documents/error.html
[Thu Jan 15 11:15:13 2009] [error] [client 172.18.180.15] File does not exist: /Library/WebServer/Documents/TEADevInfo/
[Thu Jan 15 11:15:13 2009] [error] [client 172.18.180.15] File does not exist: /Library/WebServer/Documents/error.html
[Thu Jan 15 11:23:55 2009] [error] [client 172.18.180.15] File does not exist: /Library/WebServer/Documents/favicon.ico
[Thu Jan 15 11:23:55 2009] [error] [client 172.18.180.15] File does not exist: /Library/WebServer/Documents/error.html
[Thu Jan 15 11:24:42 2009] [error] [client 172.18.180.15] File does not exist: /Library/WebServer/Documents/Library/BOCESlogo.jpg
[Thu Jan 15 11:24:42 2009] [error] [client 172.18.180.15] File does not exist: /Library/WebServer/Documents/error.html
[Thu Jan 15 11:26:15 2009] [error] [client 172.18.180.15] File does not exist: /Library/WebServer/Documents/favicon.ico
[Thu Jan 15 11:26:15 2009] [error] [client 172.18.180.15] File does not exist: /Library/WebServer/Documents/error.html
[Thu Jan 15 11:29:48 2009] [error] [client 172.18.180.15] File does not exist: /Library/WebServer/Documents/Library/BOCESlogo.jpg
[Thu Jan 15 11:29:48 2009] [error] [client 172.18.180.15] File does not exist: /Library/WebServer/Documents/error.html
[Thu Jan 15 11:35:17 2009] [error] [client 172.18.180.15] File does not exist: /Library/WebServer/Documents/HNAP1/
[Thu Jan 15 11:35:17 2009] [error] [client 172.18.180.15] File does not exist: /Library/WebServer/Documents/error.html
[Thu Jan 15 11:35:20 2009] [error] [client 172.18.180.15] File does not exist: /Library/WebServer/Documents/TEADevInfo/
[Thu Jan 15 11:35:20 2009] [error] [client 172.18.180.15] File does not exist: /Library/WebServer/Documents/error.html
[Thu Jan 15 11:50:50 2009] [error] [client 172.18.180.15] File does not exist: /Library/WebServer/Documents/robots.txt
[Thu Jan 15 11:50:50 2009] [error] [client 172.18.180.15] File does not exist: /Library/WebServer/Documents/error.html
[Thu Jan 15 11:53:20 2009] [error] [client 172.18.180.15] File does not exist: /Library/WebServer/Documents/favicon.ico
[Thu Jan 15 11:53:20 2009] [error] [client 172.18.180.15] File does not exist: /Library/WebServer/Documents/error.html
[Thu Jan 15 11:55:23 2009] [error] [client 172.18.180.15] File does not exist: /Library/WebServer/Documents/HNAP1/
[Thu Jan 15 11:55:23 2009] [error] [client 172.18.180.15] File does not exist: /Library/WebServer/Documents/error.html
[Thu Jan 15 11:55:26 2009] [error] [client 172.18.180.15] File does not exist: /Library/WebServer/Documents/TEADevInfo/
[Thu Jan 15 11:55:26 2009] [error] [client 172.18.180.15] File does not exist: /Library/WebServer/Documents/error.html
[Thu Jan 15 12:11:18 2009] [error] [client 172.18.180.15] File does not exist: /Library/WebServer/Documents/favicon.ico
[Thu Jan 15 12:11:18 2009] [error] [client 172.18.180.15] File does not exist: /Library/WebServer/Documents/error.html
[Thu Jan 15 12:15:31 2009] [error] [client 172.18.180.15] File does not exist: /Library/WebServer/Documents/HNAP1/
[Thu Jan 15 12:15:31 2009] [error] [client 172.18.180.15] File does not exist: /Library/WebServer/Documents/error.html
[Thu Jan 15 12:15:34 2009] [error] [client 172.18.180.15] File does not exist: /Library/WebServer/Documents/TEADevInfo/
[Thu Jan 15 12:15:34 2009] [error] [client 172.18.180.15] File does not exist: /Library/WebServer/Documents/error.html
[Thu Jan 15 12:35:36 2009] [error] [client 172.18.180.15] File does not exist: /Library/WebServer/Documents/HNAP1/
[Thu Jan 15 12:35:36 2009] [error] [client 172.18.180.15] File does not exist: /Library/WebServer/Documents/error.html
[Thu Jan 15 12:35:39 2009] [error] [client 172.18.180.15] File does not exist: /Library/WebServer/Documents/TEADevInfo/
[Thu Jan 15 12:35:39 2009] [error] [client 172.18.180.15] File does not exist: /Library/WebServer/Documents/error.html
[Thu Jan 15 12:55:45 2009] [error] [client 172.18.180.15] File does not exist: /Library/WebServer/Documents/HNAP1/
[Thu Jan 15 12:55:45 2009] [error] [client 172.18.180.15] File does not exist: /Library/WebServer/Documents/error.html
[Thu Jan 15 12:55:48 2009] [error] [client 172.18.180.15] File does not exist: /Library/WebServer/Documents/TEADevInfo/
[Thu Jan 15 12:55:48 2009] [error] [client 172.18.180.15] File does not exist: /Library/WebServer/Documents/error.html
[Thu Jan 15 13:04:47 2009] [error] [client 172.18.180.15] File does not exist: /Library/WebServer/Documents/favicon.ico
[Thu Jan 15 13:04:47 2009] [error] [client 172.18.180.15] File does not exist: /Library/WebServer/Documents/error.html
[Thu Jan 15 13:15:52 2009] [error] [client 172.18.180.15] File does not exist: /Library/WebServer/Documents/HNAP1/
[Thu Jan 15 13:15:52 2009] [error] [client 172.18.180.15] File does not exist: /Library/WebServer/Documents/error.html
[Thu Jan 15 13:15:55 2009] [error] [client 172.18.180.15] File does not exist: /Library/WebServer/Documents/TEADevInfo/
[Thu Jan 15 13:15:55 2009] [error] [client 172.18.180.15] File does not exist: /Library/WebServer/Documents/error.html
[Thu Jan 15 13:35:58 2009] [error] [client 172.18.180.15] File does not exist: /Library/WebServer/Documents/HNAP1/
[Thu Jan 15 13:35:58 2009] [error] [client 172.18.180.15] File does not exist: /Library/WebServer/Documents/error.html
[Thu Jan 15 13:36:01 2009] [error] [client 172.18.180.15] File does not exist: /Library/WebServer/Documents/TEADevInfo/
[Thu Jan 15 13:36:01 2009] [error] [client 172.18.180.15] File does not exist: /Library/WebServer/Documents/error.html
[Thu Jan 15 13:52:37 2009] [error] [client 172.18.180.15] File does not exist: /Library/WebServer/Documents/Library/BOCESlogo.jpg
[Thu Jan 15 13:52:37 2009] [error] [client 172.18.180.15] File does not exist: /Library/WebServer/Documents/error.html
[Thu Jan 15 13:56:06 2009] [error] [client 172.18.180.15] File does not exist: /Library/WebServer/Documents/HNAP1/
[Thu Jan 15 13:56:06 2009] [error] [client 172.18.180.15] File does not exist: /Library/WebServer/Documents/error.html
[Thu Jan 15 13:56:09 2009] [error] [client 172.18.180.15] File does not exist: /Library/WebServer/Documents/TEADevInfo/
[Thu Jan 15 13:56:09 2009] [error] [client 172.18.180.15] File does not exist: /Library/WebServer/Documents/error.html
[Thu Jan 15 14:12:16 2009] [error] [client 172.18.180.15] File does not exist: /Library/WebServer/Documents/favicon.ico
[Thu Jan 15 14:12:16 2009] [error] [client 172.18.180.15] File does not exist: /Library/WebServer/Documents/error.html
[Thu Jan 15 14:16:12 2009] [error] [client 172.18.180.15] File does not exist: /Library/WebServer/Documents/HNAP1/
[Thu Jan 15 14:16:12 2009] [error] [client 172.18.180.15] File does not exist: /Library/WebServer/Documents/error.html
[Thu Jan 15 14:16:15 2009] [error] [client 172.18.180.15] File does not exist: /Library/WebServer/Documents/TEADevInfo/
[Thu Jan 15 14:16:15 2009] [error] [client 172.18.180.15] File does not exist: /Library/WebServer/Documents/error.html
[Thu Jan 15 14:16:57 2009] [error] [client 172.18.180.15] File does not exist: /Library/WebServer/Documents/favicon.ico
[Thu Jan 15 14:16:57 2009] [error] [client 172.18.180.15] File does not exist: /Library/WebServer/Documents/error.html
[Thu Jan 15 14:29:01 2009] [error] [client 172.18.180.15] File does not exist: /Library/WebServer/Documents/registrationSERPDC.html
[Thu Jan 15 14:29:01 2009] [error] [client 172.18.180.15] File does not exist: /Library/WebServer/Documents/error.html
[Thu Jan 15 14:33:12 2009] [error] [client 172.18.180.15] File does not exist: /Library/WebServer/Documents/favicon.ico
[Thu Jan 15 14:33:12 2009] [error] [client 172.18.180.15] File does not exist: /Library/WebServer/Documents/error.html
[Thu Jan 15 14:36:19 2009] [error] [client 172.18.180.15] File does not exist: /Library/WebServer/Documents/HNAP1/
[Thu Jan 15 14:36:19 2009] [error] [client 172.18.180.15] File does not exist: /Library/WebServer/Documents/error.html
[Thu Jan 15 14:36:22 2009] [error] [client 172.18.180.15] File does not exist: /Library/WebServer/Documents/TEADevInfo/
[Thu Jan 15 14:36:22 2009] [error] [client 172.18.180.15] File does not exist: /Library/WebServer/Documents/error.html
[Thu Jan 15 14:47:08 2009] [error] [client 172.18.180.15] File does not exist: /Library/WebServer/Documents/registrationSERPDC.html
[Thu Jan 15 14:47:08 2009] [error] [client 172.18.180.15] File does not exist: /Library/WebServer/Documents/error.html
[Thu Jan 15 14:47:27 2009] [error] [client 172.18.180.15] File does not exist: /Library/WebServer/Documents/registrationSERPDC.html
[Thu Jan 15 14:47:27 2009] [error] [client 172.18.180.15] File does not exist: /Library/WebServer/Documents/error.html
So im at a loss and any ideas would be much appricated. I know that earlier in the day one of our web people updated our website to add a calender using dreamweaver but dont know much about exactly what was done.
Thanks again
Troy Smith

Thanks for the responce. So it looks to me like the content of the webpage is all there , minus the error.html file. Its all located in Library/webserver/documents. I have gone there and am even able to bring up our webpage by launching index.html and it appears to work perfectly with no broken links. you just cant access it from the outside world.
here is the last bit of the access log:
700] "GET / HTTP/1.0" 200 11110
172.18.70.21 - - [15/Jan/2009:12:42:13 -0700] "GET / HTTP/1.1" 304 -
172.18.70.21 - - [15/Jan/2009:12:42:13 -0700] "GET /mm_travel2.css HTTP/1.1" 304 -
172.18.70.21 - - [15/Jan/2009:12:42:13 -0700] "GET /BOCES_logo.jpg HTTP/1.1" 304 -
172.18.180.150 - - [15/Jan/2009:12:55:45 -0700] "GET /HNAP1/ HTTP/1.1" 404 -
172.18.180.150 - - [15/Jan/2009:12:55:48 -0700] "GET /TEADevInfo/ HTTP/1.1" 404 -
172.18.180.150 - - [15/Jan/2009:12:55:51 -0700] "GET / HTTP/1.0" 200 11110
172.18.21.33 - - [15/Jan/2009:12:59:44 -0700] "GET / HTTP/1.1" 304 -
172.18.21.33 - - [15/Jan/2009:12:59:44 -0700] "GET /mm_travel2.css HTTP/1.1" 304 -
172.18.21.33 - - [15/Jan/2009:12:59:44 -0700] "GET /BOCES_logo.jpg HTTP/1.1" 304 -
172.18.21.33 - - [15/Jan/2009:12:59:44 -0700] "GET /mm_spacer.gif HTTP/1.1" 304 -
172.18.21.33 - - [15/Jan/2009:12:59:44 -0700] "GET /mm_arrow.gif HTTP/1.1" 304 -
66.249.71.204 - - [15/Jan/2009:13:00:04 -0700] "GET /Distance%20Learning/2ndSem.png HTTP/1.1" 304 -
66.210.76.252 - - [15/Jan/2009:13:04:42 -0700] "GET / HTTP/1.1" 200 11110
66.210.76.252 - - [15/Jan/2009:13:04:42 -0700] "GET /mm_travel2.css HTTP/1.1" 200 2084
66.210.76.252 - - [15/Jan/2009:13:04:43 -0700] "GET /BOCES_logo.jpg HTTP/1.1" 200 39819
66.210.76.252 - - [15/Jan/2009:13:04:43 -0700] "GET /mm_spacer.gif HTTP/1.1" 200 43
66.210.76.252 - - [15/Jan/2009:13:04:44 -0700] "GET /mm_arrow.gif HTTP/1.1" 200 74
66.210.76.252 - - [15/Jan/2009:13:04:47 -0700] "GET /favicon.ico HTTP/1.1" 404 -
172.18.180.150 - - [15/Jan/2009:13:15:52 -0700] "GET /HNAP1/ HTTP/1.1" 404 -
172.18.180.150 - - [15/Jan/2009:13:15:55 -0700] "GET /TEADevInfo/ HTTP/1.1" 404 -
172.18.180.150 - - [15/Jan/2009:13:15:58 -0700] "GET / HTTP/1.0" 200 11110
207.119.148.113 - - [15/Jan/2009:13:25:37 -0700] "GET / HTTP/1.1" 304 -
207.119.148.113 - - [15/Jan/2009:13:25:37 -0700] "GET /mm_travel2.css HTTP/1.1" 304 -
172.18.10.22 - - [15/Jan/2009:13:26:28 -0700] "GET / HTTP/1.1" 304 -
172.18.10.22 - - [15/Jan/2009:13:26:28 -0700] "GET /mm_travel2.css HTTP/1.1" 304 -
66.249.71.203 - - [15/Jan/2009:13:30:25 -0700] "GET /Distance%20Learning/2007-08%201st%20Semester.pdf HTTP/1.1" 304 -
172.18.180.150 - - [15/Jan/2009:13:35:58 -0700] "GET /HNAP1/ HTTP/1.1" 404 -
172.18.180.150 - - [15/Jan/2009:13:36:01 -0700] "GET /TEADevInfo/ HTTP/1.1" 404 -
172.18.180.150 - - [15/Jan/2009:13:36:04 -0700] "GET / HTTP/1.0" 200 11110
172.18.10.22 - - [15/Jan/2009:13:40:32 -0700] "GET / HTTP/1.1" 304 -
172.18.10.22 - - [15/Jan/2009:13:40:32 -0700] "GET /mm_travel2.css HTTP/1.1" 304 -
172.18.10.247 - - [15/Jan/2009:13:45:41 -0700] "GET / HTTP/1.1" 304 -
172.18.10.247 - - [15/Jan/2009:13:45:41 -0700] "GET /mm_travel2.css HTTP/1.1" 304 -
172.18.80.172 - - [15/Jan/2009:13:52:34 -0700] "GET / HTTP/1.1" 304 -
172.18.80.172 - - [15/Jan/2009:13:52:34 -0700] "GET /mm_travel2.css HTTP/1.1" 304 -
172.18.80.172 - - [15/Jan/2009:13:52:37 -0700] "GET /cgi-bin/htmlos.cgi/Library/login.html HTTP/1.1" 200 5337
172.18.80.172 - - [15/Jan/2009:13:52:37 -0700] "GET /Library/BOCESlogo.jpg HTTP/1.1" 404 -
172.18.80.172 - - [15/Jan/2009:13:52:51 -0700] "POST /cgi-bin/htmlos.cgi/00196.1.091587960413596865 HTTP/1.1" 200 6906
172.18.80.172 - - [15/Jan/2009:13:52:51 -0700] "GET /Library/logo.gif HTTP/1.1" 304 -
172.18.80.172 - - [15/Jan/2009:13:53:12 -0700] "POST /cgi-bin/htmlos.cgi/00196.2.398028895013596865 HTTP/1.1" 200 6954
172.18.80.172 - - [15/Jan/2009:13:53:34 -0700] "POST /cgi-bin/htmlos.cgi/00196.3.379763596813596865 HTTP/1.1" 200 7631
172.18.80.172 - - [15/Jan/2009:13:53:41 -0700] "GET /cgi-bin/htmlos.cgi/00196.4.979421102013596865 HTTP/1.1" 200 5707
172.18.80.172 - - [15/Jan/2009:13:54:05 -0700] "POST /cgi-bin/htmlos.cgi/00196.4.653012131313596865 HTTP/1.1" 200 5009
172.18.80.172 - - [15/Jan/2009:13:54:05 -0700] "GET /Library/cartcompanion/images/trash.gif HTTP/1.1" 304 -
172.18.80.172 - - [15/Jan/2009:13:54:09 -0700] "GET /cgi-bin/htmlos.cgi/00196.6.067052834713596865 HTTP/1.1" 200 7631
172.18.80.172 - - [15/Jan/2009:13:54:18 -0700] "POST /cgi-bin/htmlos.cgi/00196.7.340537939813596865 HTTP/1.1" 200 8416
172.18.80.172 - - [15/Jan/2009:13:54:30 -0700] "GET /cgi-bin/htmlos.cgi/00196.8.1081705853513596865 HTTP/1.1" 200 6036
172.18.80.172 - - [15/Jan/2009:13:54:46 -0700] "POST /cgi-bin/htmlos.cgi/00196.8.680478888813596865 HTTP/1.1" 200 5489
172.18.80.172 - - [15/Jan/2009:13:54:48 -0700] "GET /cgi-bin/htmlos.cgi/00196.10.067088757713596865 HTTP/1.1" 200 8430
172.18.80.172 - - [15/Jan/2009:13:54:59 -0700] "POST /cgi-bin/htmlos.cgi/00196.11.383185021613596865 HTTP/1.1" 200 6953
172.18.80.172 - - [15/Jan/2009:13:55:04 -0700] "GET /cgi-bin/htmlos.cgi/00196.12.186489933813596865 HTTP/1.1" 200 5489
172.18.80.172 - - [15/Jan/2009:13:55:07 -0700] "POST /cgi-bin/htmlos.cgi/00196.13.316198235313596865 HTTP/1.1" 200 4484
172.18.180.150 - - [15/Jan/2009:13:56:06 -0700] "GET /HNAP1/ HTTP/1.1" 404 -
172.18.180.150 - - [15/Jan/2009:13:56:09 -0700] "GET /TEADevInfo/ HTTP/1.1" 404 -
172.18.180.150 - - [15/Jan/2009:13:56:12 -0700] "GET / HTTP/1.0" 200 11110
172.19.62.94 - - [15/Jan/2009:14:05:22 -0700] "GET / HTTP/1.1" 304 -
172.19.62.94 - - [15/Jan/2009:14:05:22 -0700] "GET /mm_travel2.css HTTP/1.1" 304 -
172.19.62.94 - - [15/Jan/2009:14:05:23 -0700] "GET /BOCES_logo.jpg HTTP/1.1" 304 -
172.19.62.94 - - [15/Jan/2009:14:05:23 -0700] "GET /mm_spacer.gif HTTP/1.1" 304 -
172.19.62.94 - - [15/Jan/2009:14:05:23 -0700] "GET /mm_arrow.gif HTTP/1.1" 304 -
172.19.62.94 - - [15/Jan/2009:14:05:37 -0700] "GET /ExcepStuServ.html HTTP/1.1" 304 -
172.19.62.94 - - [15/Jan/2009:14:05:37 -0700] "GET /Scripts/AC_RunActiveContent.js HTTP/1.1" 304 -
172.19.62.94 - - [15/Jan/2009:14:05:39 -0700] "GET /EngSafeguards.swf HTTP/1.1" 304 -
172.19.62.94 - - [15/Jan/2009:14:05:39 -0700] "GET /SafeguardsSpanish.swf HTTP/1.1" 304 -
172.19.62.94 - - [15/Jan/2009:14:05:39 -0700] "GET /ChildFind.swf HTTP/1.1" 304 -
172.19.62.94 - - [15/Jan/2009:14:05:39 -0700] "GET /CSAPA.swf HTTP/1.1" 304 -
172.19.62.94 - - [15/Jan/2009:14:05:39 -0700] "GET /CDE.swf HTTP/1.1" 304 -
172.19.62.94 - - [15/Jan/2009:14:05:39 -0700] "GET /EarlyCh.swf HTTP/1.1" 304 -
172.19.62.94 - - [15/Jan/2009:14:05:39 -0700] "GET /SEAS.swf HTTP/1.1" 304 -
172.18.71.229 - - [15/Jan/2009:14:12:16 -0700] "GET / HTTP/1.1" 200 11110
172.18.71.229 - - [15/Jan/2009:14:12:16 -0700] "GET /mm_travel2.css HTTP/1.1" 200 2084
172.18.71.229 - - [15/Jan/2009:14:12:16 -0700] "GET /mm_spacer.gif HTTP/1.1" 200 43
172.18.71.229 - - [15/Jan/2009:14:12:16 -0700] "GET /BOCES_logo.jpg HTTP/1.1" 200 39819
172.18.71.229 - - [15/Jan/2009:14:12:16 -0700] "GET /mm_arrow.gif HTTP/1.1" 200 74
172.18.71.229 - - [15/Jan/2009:14:12:16 -0700] "GET /favicon.ico HTTP/1.1" 404 -
172.18.71.229 - - [15/Jan/2009:14:15:06 -0700] "GET / HTTP/1.1" 304 -
172.18.71.229 - - [15/Jan/2009:14:15:06 -0700] "GET /mm_travel2.css HTTP/1.1" 304 -
172.18.180.150 - - [15/Jan/2009:14:16:12 -0700] "GET /HNAP1/ HTTP/1.1" 404 -
172.18.180.150 - - [15/Jan/2009:14:16:15 -0700] "GET /TEADevInfo/ HTTP/1.1" 404 -
172.18.180.150 - - [15/Jan/2009:14:16:18 -0700] "GET / HTTP/1.0" 200 11110
10.136.34.40 - - [15/Jan/2009:14:16:56 -0700] "GET / HTTP/1.1" 200 11110
10.136.34.40 - - [15/Jan/2009:14:16:56 -0700] "GET /mm_travel2.css HTTP/1.1" 200 2084
10.136.34.40 - - [15/Jan/2009:14:16:57 -0700] "GET /favicon.ico HTTP/1.1" 404 -
172.18.71.164 - - [15/Jan/2009:14:18:59 -0700] "GET / HTTP/1.1" 304 -
172.18.71.164 - - [15/Jan/2009:14:19:00 -0700] "GET /mm_travel2.css HTTP/1.1" 304 -
204.132.102.1 - - [15/Jan/2009:14:29:01 -0700] "GET /registrationSERPDC.html HTTP/1.1" 404 -
199.2.43.225 - - [15/Jan/2009:14:33:10 -0700] "GET / HTTP/1.1" 200 11110
199.2.43.225 - - [15/Jan/2009:14:33:11 -0700] "GET /mm_travel2.css HTTP/1.1" 200 2084
199.2.43.225 - - [15/Jan/2009:14:33:12 -0700] "GET /favicon.ico HTTP/1.1" 404 -
172.18.10.22 - - [15/Jan/2009:14:34:55 -0700] "GET / HTTP/1.1" 304 -
172.18.10.22 - - [15/Jan/2009:14:34:55 -0700] "GET /mm_travel2.css HTTP/1.1" 304 -
172.18.180.150 - - [15/Jan/2009:14:36:19 -0700] "GET /HNAP1/ HTTP/1.1" 404 -
172.18.180.150 - - [15/Jan/2009:14:36:22 -0700] "GET /TEADevInfo/ HTTP/1.1" 404 -
172.18.180.150 - - [15/Jan/2009:14:36:25 -0700] "GET / HTTP/1.0" 200 11110
70.90.115.161 - - [15/Jan/2009:14:36:53 -0700] "GET / HTTP/1.1" 200 11110
70.90.115.161 - - [15/Jan/2009:14:36:54 -0700] "GET /mm_travel2.css HTTP/1.1" 200 2084
70.90.115.161 - - [15/Jan/2009:14:37:11 -0700] "GET /HumRes.html HTTP/1.1" 200 19117
70.90.115.161 - - [15/Jan/2009:14:37:12 -0700] "GET /Scripts/AC_RunActiveContent.js HTTP/1.1" 200 8321
70.90.115.161 - - [15/Jan/2009:14:37:12 -0700] "GET /AmFidelity.swf HTTP/1.1" 200 1520
70.90.115.161 - - [15/Jan/2009:14:37:12 -0700] "GET /CDE2.swf HTTP/1.1" 200 1165
70.90.115.161 - - [15/Jan/2009:14:37:12 -0700] "GET /CEBT.swf HTTP/1.1" 200 1241
70.90.115.161 - - [15/Jan/2009:14:37:12 -0700] "GET /jobapp.swf HTTP/1.1" 200 2360
70.90.115.161 - - [15/Jan/2009:14:37:13 -0700] "GET /PERA.swf HTTP/1.1" 200 1169
70.90.115.161 - - [15/Jan/2009:14:37:13 -0700] "GET /VSP.swf HTTP/1.1" 200 1162
70.90.115.161 - - [15/Jan/2009:14:38:07 -0700] "GET /AdmStaff.html HTTP/1.1" 200 16561
70.90.115.161 - - [15/Jan/2009:14:38:07 -0700] "GET /mm_travel2.css HTTP/1.1" 304 -
70.90.115.161 - - [15/Jan/2009:14:41:07 -0700] "GET /CDE2.swf HTTP/1.1" 304 -
70.90.115.161 - - [15/Jan/2009:14:41:08 -0700] "GET /CEBT.swf HTTP/1.1" 304 -
70.90.115.161 - - [15/Jan/2009:14:41:08 -0700] "GET /jobapp.swf HTTP/1.1" 304 -
70.90.115.161 - - [15/Jan/2009:14:41:08 -0700] "GET /PERA.swf HTTP/1.1" 304 -
70.90.115.161 - - [15/Jan/2009:14:41:08 -0700] "GET /VSP.swf HTTP/1.1" 304 -
70.90.115.161 - - [15/Jan/2009:14:41:10 -0700] "GET /AmFidelity.swf HTTP/1.1" 304 -
172.18.10.22 - - [15/Jan/2009:14:41:26 -0700] "GET / HTTP/1.1" 304 -
172.18.10.22 - - [15/Jan/2009:14:41:27 -0700] "GET /mm_travel2.css HTTP/1.1" 304 -
172.17.35.11 - - [15/Jan/2009:14:47:08 -0700] "GET /registrationSERPDC.html HTTP/1.1" 404 -
172.17.35.11 - - [15/Jan/2009:14:47:27 -0700] "GET /registrationSERPDC.html HTTP/1.1" 404 -
and here is the output of the apache test command:
Last login: Fri Jan 16 08:36:31 on ttyp1
Welcome to Darwin!
MultiServer:~ admin$ apachectl configtest
Processing config directory: /etc/httpd/sites/*.conf
Processing config file: /etc/httpd/sites/+entropy-php.conf
Syntax error on line 8 of /etc/httpd/sites/+entropy-php.conf:
Cannot load /usr/local/php5/libphp5.so into server: (reason unknown)
MultiServer:~ admin$
if i read this correctly looks like there is a syntax errror in the -php.conf file. So where do i go to see that file?
thanks again for your help
Troy

Web Services Not Working because wwv_flow_collections view is empty

Hello,
I followed this example to try and get a web service running in my Application:
http://apex.oracle.com/i/doc/advnc_rest_web_eg_2.htm
When I run the page and enter the zip code 43221 they recommend with a radius of 5, I get no results. When debugging and throwing the query into SQL Dev, I have no records in my wwv_flow_collections view. Looking at the tables that comprise the view, wwv_flow_collections$ and wwv_flow_collection_members$, these two tables would join on c.id = m.collection_id alone, but there are additional in-line selects involving the DUAL table that make the query return 0 records and therefore the view is empty. I've never messed with these views/tables, are these auto-populated by APEX? Can they be updated? Right now I cannot get any web services to work because of this. Here is the from clause for the wwv_flow_collections view:
FROM
wwv_flow_collections$ c,
wwv_flow_collection_members$ m
WHERE
c.session_id =
SELECT
v('SESSION')
FROM
dual
AND c.security_group_id =
SELECT
wwv_flow.get_sgid
FROM
dual
AND c.id = m.collection_id
AND c.flow_id =
SELECT
nv('FLOW_ID')
FROM
dual
Can anyone help? Thanks in advance!
John

John,
I have been working this week to set up the exact same thing and got the same empty result set that you have. In this case I believe it has nothing to do with APEX. I downloaded soapUI 4.0.1 which tests web services and used the WSDL described in the APEX Webservices tutorial for http://www.ignyte.com/webservices/ignyte.whatsshowing.webservice/moviefunctions.asmx?wsdl to create the same sample requests. It also returns no results.
So, I decided to use a different public WSDL and try to get it working. Here are my steps taken below:
BACKGROUND:
- I am using APEX 4.0 on an 11gR2 database, with ACLS set up for the APEX schema this app is using.
- First off, the site I used I just found through google. It is a currency conversion rate webservice. It is explained here: http://www.webservicex.net/CurrencyConvertor.asmx
- The WSDL is found here: http://www.webservicex.net/CurrencyConvertor.asmx?WSDL
SETTING UP THE WEBSERVICE:
1. In a new APEX application I went to "*Shared Components*" -> "*Web Service References*" -> "*Create*" to create a new web service reference
2. Selected manual
3. Called the webservice CURRENCY_TEST
4. Set the URL to http://www.webservicex.net/CurrencyConvertor.asmx
5. Set the Action to http://www.webserviceX.NET/ConversionRate (Action can be found in the WSDL - showing a few lines below)
<pre class="jive-pre">
<wsdl:binding name="CurrencyConvertorSoap" type="tns:CurrencyConvertorSoap">
<soap:binding transport="http://schemas.xmlsoap.org/soap/http"/>
<wsdl:operation name="ConversionRate">
<soap:operation soapAction="*http://www.webserviceX.NET/ConversionRate*" style="document"/>
<wsdl:input>
<soap:body use="literal"/>
</wsdl:input>
<wsdl:output>
<soap:body use="literal"/>
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
</pre>
6. WSDL explains that the version is *1.1* in this case. (However, this same WSDL has the same operation for 1.2 so it probably would work)
7. No Authentication
8. soapUI 4.0.1 gave me the soap request which in this case is the following:
<pre class="jive-pre">
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:web="http://www.webserviceX.NET/">
<soapenv:Header/>
<soapenv:Body>
<web:ConversionRate>
<web:FromCurrency>#FROM_CURRENCY#</web:FromCurrency>
<web:ToCurrency>#TO_CURRENCY#</web:ToCurrency>
</web:ConversionRate>
</soapenv:Body>
</soapenv:Envelope>
</pre>
9. Stored response in collection CURRENCY_COLLECTION
10. Saved my web service reference
11. Test the web service reference (you have to be on the web service references page and instead of the icon view of the report, use the list view. Click on the test icon to test the web service)
12. On the test page, change #FROM_CURRENCY# to USD (for US dollars) and #TO_CURRENCY# to EUR (Euros)
13. Click the test button and you should see a valid soap response with a currency rate within the ConversionRateResult tags
USING THE WEBSERVICE AND GETTING RESULTS:
1. Went back to the application and hit "*Create Page*" -> "*Form*" -> "*Form and Report on Web Service*"
2. Selected my CURRENCY_TEST web service reference
3. Next on the next page
4. For input parameters, left the defaults to create 2 inputs, From_Currency and To_Currency
5. Soap Style for this is Document (found in the WSDL as an attribute just after the soapAction attribute in the WSDL snippet above)
6. Message Format is Literal (Also found above in the wsdl:output for this operation under the use attribute)
7. XPATH is a bit complicated. In this case put */ConversionRateResponse* (I used the soapUI 4.0.1 to send the request and get back the soap response to see what the response tags would include and which path I'm going to)
8. Message Namespace is http://www.webserviceX.NET/ (which is also found in the response soap message - I'd really recommend a tool to test this outside of APEX)
9. For Parameter Names there is only one and it is ConversionRateResult (also found in the response soap message)
10. Finish and run the report.
OTHER GOTCHAS:
So I finally got this to work, but in my case I was querying a remedy webservice and the xml tags I get back are all xmlns:ns0 and all response tags prefaced with ns0:
In this case I had to after using the wizard go back and edit my query to change xmlns to xmlns:ns0 since the builder only assumes xmlns.
<pre class="jive-pre">
select extractValue(value(t),'/*/ns0:Assigned_Group','xmlns:ns0="urn:HPD_IncidentInterface_WS"') "Assigned_Group"
, extractValue(value(t),'/*/ns0:Assignee','xmlns:ns0="urn:HPD_IncidentInterface_WS"') "Assignee"
, extractValue(value(t),'/*/ns0:Resolution','xmlns:ns0="urn:HPD_IncidentInterface_WS"') "Resolution"
, extractValue(value(t),'/*/ns0:Status','xmlns:ns0="urn:HPD_IncidentInterface_WS"') "Status"
from wwv_flow_collections c,
table(xmlsequence(extract(c.xmltype001,'//ns0:HelpDesk_Query_ServiceResponse','xmlns:ns0="urn:HPD_IncidentInterface_WS"'))) t
where c.collection_name = 'INCIDENT_TEST'
</pre>
Good Luck!
Jonathon

"no serializer is registered..." error with a web service not working

I'm using JDeveloper 10.1.3
EJB 3.0
I'm having issues with the web service not working after I create a client for it. The web service works fine up until I generate the proxy on the other side.
ERROR An error occurred for port: {http://buslogic/}MyWebService1SoapHttpPort: no serializer is registered for (class buslogic.runtime.....
I saved the file before I added the proxy and the wsdl looks the same between the working one and the non working one. I can not pin point the when the change to the web service is occuring. It seemed to work once all the way up until I had a ADF page trying to retrieve data, another time it failed when the proxy was created.
I can get the version that I saved to work immediately after the version that does not fails.
Any help would be greatly appreciated,
Dan

I'm using JDeveloper 10.1.3
EJB 3.0
I'm having issues with the web service not working after I create a client for it. The web service works fine up until I generate the proxy on the other side.
ERROR An error occurred for port: {http://buslogic/}MyWebService1SoapHttpPort: no serializer is registered for (class buslogic.runtime.....
I saved the file before I added the proxy and the wsdl looks the same between the working one and the non working one. I can not pin point the when the change to the web service is occuring. It seemed to work once all the way up until I had a ADF page trying to retrieve data, another time it failed when the proxy was created.
I can get the version that I saved to work immediately after the version that does not fails.
Any help would be greatly appreciated,
Dan

My ipod has a blank white screen and wont change no matter what i press or try.. what should i do?

my ipod has a blank white screen and wont change no matter what i press or try.. what do i need to do?

Try here:
iOS: Not responding or does not turn on
If you can't turn it off, let the battery fully drain. After charging for at least an hour try again.
If still problem that indicates a hardware problem an an appointment at the Genius Bar of an Apple store.

7520 All in one web services not working

I got notified of a new update for the 7520. When I tried to install it, the screen said it was successful but then said "updating....do not turn power off" and it freezes and the update never gets successfully installed and I have no web services. I tried reiinstalling the whole software package, restarted the printer multiple times and the router too and can't seem to find an answer. Anyone know what to do next?

bjg1,
Welcome to the HP Forum.
Assuming you can get to the point where you can get the software installed, you might be able to get Web Services back using the following workaround.
Suggested Workaround:
On the printer, Disable the web services -- that is, remove web services from the printer.
This may then allow you to then "Enable Web Services".
There is a consequence to this action: Your previously selected ePrint custom address will no longer be valid and cannot be reused. When you go back and log into your HP Connected account you may need to not only "add device" to re-add the printer to the device list of ePrint printers, you will have to select a new custom email address for that printer.
Where / how is this done?
Side Bar: The Disable Web services is usually done on the printer, although if the service is actually working, one can switch off EWS from EWS.
Disable EWS on the printer, wait a few seconds, and then Enable the service again.
Switching off EWS does not "break" your HP Connected account, although it does put a crimp in your printer's ePrint setup. You can still log into the HP Connected account where the printer and the ePrint account is managed. After EWS is disabled / enabled, you must log into your HP Connected account.
If you do not find your printer listed under the Devices tab, you can usually "add device" and add your printer right back into the list at this point.
If you do find your printer, but it won't cooperate, it won't update, you cannot "do" anything with it, go ahead and remove it.
If you have to "remove the printer", then Log out of HP Connected.
If you have to "remove the printer", then Walk around your house / office / back yard -- come back.
Log into HP Connected and use "Add device" to add your printer.
Update the ePrint email address to something new - add a number, think of something new and clever; it does not matter as long as the name is different.
Click the Kudos Thumbs-Up!
It is a nice way to say “Thank You" for the help.
Although I strive to reflect HP's best practices, I do not work for HP.
Kind Regards,
Dragon-Fur

One of the Web Service not working

Hi All,
I have created a AIF for Posting Goods Receipt for a Purchase Order.
The form is using 2 web services: 1) for Getting the Purchase Order details, and 2) for posting the Goods Receipt for that PO.
The form was working absolutely fine for the Customer, i.e. customer was able to fetch the PO details as well as Post the Goods Receipt for that PO.
Then, based on the UAT comments from the customer, we did some minor changes in the function module correponding to the web service which fetches the PO details. We also did some script changes in the form.
After the deploying the changes, the Web service corresponding to Post Goods Receipt has stopped working for the Customer, though the other web service(PO Get Details) is still working fine for them. When the Customer clicks the Button on which the Post Goods Receipt web service is called, they get no response at all.
What is more surprising is that both the web services are still working fine for us(developers).
Please help.

Hi Chintan,
One of the fields on the form was mapped to the SAP field which was of length 16 characters.
If the user enters more than 16 charcters on the form....iTHe Web Service does nothing
I restricted the length to 16 on the form and it started working again

SAXException submitting to Web Service, but works fine in "Test" button in dialog

I have an external web service to call from LC, and I know it works with a sample XML file I was given. When I exercise that xml in the Test area of the WebService Settings dialog for the Invoke Web Service activity in my LC process, it works perfectly.
But when I actually invoke the process, I get this error back from the service's server:
<faultstring>org.xml.sax.SAXException: WSWS3084E: Error: SimpleDeserializer encountered a child element, which is NOT expected, in something it was trying to deserialize.</faultstring>
I put WireShark on the LC dev server I'm using, and was able to observe that when the Test button calls the web service, the Protocol is marked as HTTP/XML. When I run it through my process using the exact same xml as the test is using, it reports just HTTP, not HTTP/XML. That's the only clue I can find as to what's different about the 2 calls, one succeeding, the other failing.
Has anyone seen anything like this and have a solution? I'm unable to invoke this web service. Note that other calls to the same server work fine, with identical settings and similar operations.
Thanks!

I don't advocate or use global variables either. However a functional global (sometimes called an action engine) is not a traditional global variable. It is a subVI with an uninitialized shift register to store the data and an input which indicates what action should be performed. In the simplest case this is just initialize, read and write. However you can perform more complex tests or operations on this data as well. An action engine can be viewed similar to an object. You have a single instance that has data and methods you can perform. However action engines (unless implement using LVOOP) do not support all of the other features of OOP classes and objects.
The fact that your program crashes tells me that in some part of your code your reference is becoming invalid. You could be running into a case where the reference is being automatically closed and released due to the order of execution of your code. It is not an inherent flaw in the language.
In addition, a good application architecture will try to decouple the UI from the processing tasks. Passing references to items on the UI to low level tasks creates an explicit link between the UI and the processing task. It couples them together and makes reuse more difficult. Creating an API (via events, notifiers, queues or an action engine) decouples the processing task from the UI. It makes your application code more flexible and easier to reuse.
Mark Yedinak
"Does anyone know where the love of God goes when the waves turn the minutes to hours?"
Wreck of the Edmund Fitzgerald - Gordon Lightfoot

Problem getting RESTful web service reference working with header value

Hi,
I posted this on Apex Listener forum but since I am not sure problem is with my Application RESTful web service reference or a Listener issue, I am posting here as well:
I am on Apex 4.2.2 and Listener 2.1 and the listener is on WEblogic.
I succeeded to get a RESTful web service working in an application with no header to obtain a full set of data. The data set is very large, so I am now just trying to set up a web service to get a set of data based on a student ID.
I followed the examples shown in the RESTful web service module of SQL Workshop and set up a handler of this type:
https://ourweblogicserver/apex/bnr/ace/students/course_grades/{stid}
The test for this handler succeeded both for JSON output and CSV output in the Workshop test environment.
However, when I try it from a Web Service Reference that I created for my application following what looked like the same approach used on the example video, I get NO data back. If I put a 'stid' directly into a URL of a web browser and do the basic authentication I get the data!!
This is what I have for the Web service reference:
https://ourweblogicserver/apex/bnr/ace/students/course_grades/{stid}
Basic auth set to Yes -- and this is working -- I am able to authenticate
HTTP method Get
output format Text
no response Xpath
no response namespace
defaults for new record and parameter delimiter
NO REST input parameters
Output set for all the fields in the data set queried (same set of data as in my rest service which does not have any http header)
REST HTTP Header : Name stid
I there something I am missing. I am not sure how to troubleshoot this further.
I also tried exactly following the example shown on the Oracle Video for RESTFul web services at
http://www.youtube.com/watch?v=gkCvd6P8_OU
and I can't get the 2nd example to work either-- where the header has the bind variable parameter.
Pat

I was able to resolve the problem -- in the latest version of the RESTful web service that I created, I had left out the creation of the Header Parameter bind variable. Once I did that everything works fine!! I was able to test in the application and got the record of an individual student.
Thanks,
PM

Web Service Tester works perfectly but the Web service is not.

I have a web service developed in EDQ that works as expected when I check using Web Service tester.
However when the upstream server sends the request to this web service, the response it gets is not as expected. "
This difference is only for a particular rule.(if Street Address Line 1 is 'Holiday', then the Customer Status should become 'C')
All the other rules are working s expected.
What can this difference be due to?
Thanks and Regards.
Ravi

The only logical explanation is that the client sending the request is sending different data. Perhaps it may be something subtle such as trailing whitespace (with the process you have constructed not coping with this)?
Mike

Web Services Not Working

Hello Everyone!
I have an HP Laserjet M1217nfw printer. Got everything working just fine, but when I try to get web services enabled (through the printer's web interface) I get the following error message when clicking on the "enable" button:
"Connection Error. Check Internet Connection".
I found several posts up here, and the fix seemed to entail changing the DNS server settings (in the printer) to Google's DNS numbers, 8.8.8.8 and 8.8.4.4. That did not work.
I also tried to update the printer's firmware, however I get a message during the update to disable the printer's RFU (remote firmware update). I have found no way to do this, and the update fails when I attempt it.
Sooooo......
I'm looking for anyone who either knows a fix for the web services error message.....or who, at the very least can tell me how to disable RFU on the printer so I can try updating the firmeware.
Any help on this would be greatly appreciated.

Hi WildNorth
Here is a url on how to print the configuration report.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02217343&cc=us&dlc=en&lc=en&jumpid=reg_r1002_us...
Let me know what it is showing for the firmware date please.
The newest version is Version20130912.
Printer on wireless or hardwired network?
What operating system are you running?
I will send you a private message with more information to try.
In the forum beside your handle name just click on the
envelope to view it.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Web service not working when called remotely

Hi there!
I built a simple web service to generate a sequence number to be cosumed by PDF forms.
It works perfecly when I run PDFs on my machine, using localhost, etc.
Whem deployed on the client's servers it does not work. The only difference is the client is running LiveCycle on Linux over their inhouse corporate network.
When the web service is added to forms in LC Designer, the ws structure is built correctly and if called from a web browser the XML response is ok too.
I've checked LiveCycle log file - there's nothing there, the ws is not even being called.
Where should I look for error messages or other resources to aid me in identifying the problem?
Thank you very much for any hints!
Marcos

Hi there!
I built a simple web service to generate a sequence number to be cosumed by PDF forms.
It works perfecly when I run PDFs on my machine, using localhost, etc.
Whem deployed on the client's servers it does not work. The only difference is the client is running LiveCycle on Linux over their inhouse corporate network.
When the web service is added to forms in LC Designer, the ws structure is built correctly and if called from a web browser the XML response is ok too.
I've checked LiveCycle log file - there's nothing there, the ws is not even being called.
Where should I look for error messages or other resources to aid me in identifying the problem?
Thank you very much for any hints!
Marcos

XE web service stopped working

I installed XE 10g rel 2 on a Ubuntu Linux server a few weeks ago (so that's how much experience I have). I've been using the web service (server:8080/apex from one Vista and one XP client) for a few days. After a few hours of light work today, a couple of simple queries seemed to hang. Eventually I tried to end the sessions under the admin panel, but they didn't stop. I tried to restart the database, but then could no longer connect. Seems port 8080 is no longer serving. Restarting the server didn't help.
The network connection is OK. The database is up: I can access it using SQL*Plus from locally on the server.
While hacking at this problem, I have:
- changed tnsnames.ora, replacing server name with server IP address. NB server name is moo.mag. Oracle seems to know it as moo and sometimes as moo.mag. /etc/hosts is shown below.
- changed the password for user oracle and added user oracle to group dba.
Below I have:
- tnsnames.ora
- listener.ora
- listener.log
- /etc/hosts
Help is appreciated!
Paul
oracle@moo:~/app/oracle/product/10.2.0/server/network/admin$ cat /etc/hosts
127.0.0.1 localhost
127.0.1.1 moo.mag moo
# The following lines are desirable for IPv6 capable hosts
::1 ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
ff02::3 ip6-allhosts
lsnrctl status:
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 18-APR-2009 23:08:58
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 10.2.0.1.0 - Production
Start Date 18-APR-2009 22:39:33
Uptime 0 days 0 hr. 29 min. 25 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Default Service XE
Listener Parameter File /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/admin/listener.ora
Listener Log File /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC_FOR_XE)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.0.22)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
oracle@moo:~/app/oracle/product/10.2.0/server/bin$
# listener.ora Network Configuration File:
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /usr/lib/oracle/xe/app/oracle/product/10.2.0/server)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.0.22)(PORT = 1521))
DEFAULT_SERVICE_LISTENER = (XE)
# tnsnames.ora Network Configuration File:
XE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.0.22)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = XE)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
listener.log from about the time of the problem I think:
18-APR-2009 20:17:32 * http * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.0.27)(PORT=53269)) * handoff * http * 0
18-APR-2009 20:17:40 * http * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.0.27)(PORT=53270)) * handoff * http * 0
18-APR-2009 20:17:55 * http * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.0.27)(PORT=53271)) * handoff * http * 0
18-APR-2009 20:17:55 * http * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.0.27)(PORT=53272)) * handoff * http * 0
18-APR-2009 20:21:08 * service_update * XE * 0
18-APR-2009 20:21:11 * service_update * XE * 0
18-APR-2009 20:21:11 * service_update * XE * 0
No longer listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=moo.mag)(PORT=8080))(Presentation=HTTP)(Session=RAW))
18-APR-2009 20:21:17 * service_died * XE * 12537
No longer listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC_FOR_XE)))
No longer listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=moo.mag)(PORT=1521)))
Listener completed notification to CRS on stop
18-APR-2009 20:21:22 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=moo)(USER=oracle))(COMMAND=stop)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=169869568)) * stop * 0
TNSLSNR for Linux: Version 10.2.0.1.0 - Production on 18-APR-2009 20:26:00
Copyright (c) 1991, 2005, Oracle. All rights reserved.
System parameter file is /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/admin/listener.ora
Log messages written to /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/log/listener.log
Trace information written to /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/trace/listener.trc
Trace level is currently 0
Started with pid=4465
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC_FOR_XE)))
Error listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=192.168.0.22)(PORT=1521)))
TNS-12545: Connect failed because target host or object does not exist
TNS-12560: TNS:protocol adapter error
TNS-00515: Connect failed because target host or object does not exist
Linux Error: 99: Cannot assign requested address
No longer listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC_FOR_XE)))
TNSLSNR for Linux: Version 10.2.0.1.0 - Production on 18-APR-2009 20:38:58
Copyright (c) 1991, 2005, Oracle. All rights reserved.
System parameter file is /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/admin/listener.ora
Log messages written to /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/log/listener.log
Trace information written to /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/trace/listener.trc
Trace level is currently 0
Started with pid=5775
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC_FOR_XE)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.0.22)(PORT=1521)))
Listener completed notification to CRS on start
TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
18-APR-2009 20:38:58 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=moo)(USER=oracle))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=169869568)) * status * 0
18-APR-2009 20:54:39 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=moo)(USER=oracle))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=169869568)) * status * 0
No longer listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC_FOR_XE)))
No longer listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.0.22)(PORT=1521)))
Listener completed notification to CRS on stop
18-APR-2009 21:07:50 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=moo)(USER=oracle))(COMMAND=stop)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=169869568)) * stop * 0
TNSLSNR for Linux: Version 10.2.0.1.0 - Production on 18-APR-2009 21:07:50
Copyright (c) 1991, 2005, Oracle. All rights reserved.
System parameter file is /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/admin/listener.ora
Log messages written to /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/log/listener.log
Trace information written to /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/trace/listener.trc
Trace level is currently 0
Started with pid=6613
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC_FOR_XE)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.0.22)(PORT=1521)))
Listener completed notification to CRS on start
TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
18-APR-2009 21:07:50 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=moo)(USER=oracle))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=169869568)) * status * 0
18-APR-2009 21:25:39 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=moo)(USER=paul))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=169869568)) * status * 0
18-APR-2009 21:25:43 * ping * 0
18-APR-2009 21:26:15 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=moo)(USER=paul))(COMMAND=services)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=169869568)) * services * 0
18-APR-2009 21:26:32 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=moo)(USER=paul))(COMMAND=reload)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=169869568)) * reload * 1190
TNS-01190: The user is not authorized to execute the requested listener command
18-APR-2009 21:51:32 * ping * 0
18-APR-2009 21:51:35 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=moo)(USER=paul))(COMMAND=reload)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=169869568)) * reload * 1190
TNS-01190: The user is not authorized to execute the requested listener command
No longer listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC_FOR_XE)))
No longer listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.0.22)(PORT=1521)))
Listener completed notification to CRS on stop
18-APR-2009 22:19:33 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=moo)(USER=oracle))(COMMAND=stop)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=169869568)) * stop * 0
TNSLSNR for Linux: Version 10.2.0.1.0 - Production on 18-APR-2009 22:21:05
Copyright (c) 1991, 2005, Oracle. All rights reserved.
System parameter file is /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/admin/listener.ora
Log messages written to /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/log/listener.log
Trace information written to /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/trace/listener.trc
Trace level is currently 0
Started with pid=4461
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC_FOR_XE)))
Error listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=192.168.0.22)(PORT=1521)))
TNS-12545: Connect failed because target host or object does not exist
TNS-12560: TNS:protocol adapter error
TNS-00515: Connect failed because target host or object does not exist
Linux Error: 99: Cannot assign requested address
No longer listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC_FOR_XE)))
TNSLSNR for Linux: Version 10.2.0.1.0 - Production on 18-APR-2009 22:39:32
Copyright (c) 1991, 2005, Oracle. All rights reserved.
System parameter file is /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/admin/listener.ora
Log messages written to /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/log/listener.log
Trace information written to /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/trace/listener.trc
Trace level is currently 0
Started with pid=5612
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC_FOR_XE)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.0.22)(PORT=1521)))
Listener completed notification to CRS on start
TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
18-APR-2009 22:39:33 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=moo)(USER=oracle))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=169869568)) * status * 0
18-APR-2009 22:44:35 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=moo)(USER=oracle))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=169869568)) * status * 0
18-APR-2009 23:08:58 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=moo)(USER=oracle))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=169869568)) * status * 0
oracle@moo:~/app/oracle/product/10.2.0/server/network/log$

Thanks - nothing jumps out...
bigdelboy wrote:
I note use of 192.168.0.22 in various configuration files .... and maybe not in some others ... this may not be helpful.
I'm looking to make sure this is consistent.
tnsping tns_service_name
Returns OK on both client and server.
sqlplus x/y@+tns_service_name+
I haven't used this from the remote client before. I tried from the network client
sqlplus id/pwd@XE
Got
ERROR:
ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
lsnrctl status
As shown before:
paul@moo:/usr/lib/oracle/xe/app/oracle/admin/XE/bdump$ lsnrctl status
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 19-APR-2009 12:21:18
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 10.2.0.1.0 - Production
Start Date 18-APR-2009 22:39:33
Uptime 0 days 13 hr. 41 min. 45 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Default Service XE
Listener Parameter File /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/admin/listener.ora
Listener Log File /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC_FOR_XE)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.0.22)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
Ensure the firewall is okay on ports 1521 and 8080.
Suddenly stopped on two different remote clients running different OS and different firewalls, so it won't likely be a local problem. I suppose the router could have decided to block the port. Browsing on server shows server up and running on default, but not serving port 8080. (I.e., "lynx 192.168.0.22:80" is OK; "lynx 192.168.0.22:8080" returns "Unable to connect to remote host.")

Web services wont work no matter what i do

Similar Messages

Maybe you are looking for