Web servises is not getting enable

i have applied all settings like you told in last msg but it still showing msg "check your internet connection "
and i m having strong internet connection also

Hi @souru
If you are still having issues enabling the web services, please try using 209.244.0.3 for the Primary DNS server and 209.244.0.4 for the Alternate DNS server. These are Level3’s public DNS servers. I have found recently that the Laserjet series of printers work better with Level3’s DNS servers.
If you are still unable to enable the web services after doing the above, please call HP’s Cloud Services at 1-855-785-2777 if you live in the USA/Canada region. If you live outside the USA/Canada region please click here to find the Technical Support number for your country/region.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Similar Messages

Officejet 8620 Web Services Could Not Be Enabled

I can get my Officejet 8620 to connect to the network but it can't connect to the Internet. When I hit the apps button it says "Web Services Could Not Be Enabled". I'm using a Netgear Nighthawk R7000 router. I can find no helpful HP documentation that tells you how to get around this issue other than to wait and try again later if you can't connect. It's been days that I've been trying so I don't think more time is the solution.
Can someone help?
Thanks.

Hello MAIAston,
Welcome to the HP Support Forums!
A common fix for the error "Web Services Could Not Be Enabled" is to apply a Manual I.P and DNS on the 8620. To apply this to the printer you will first need to print and Network Configuration Page from the printer (Wireless icon>Settings).
Type the I.P address into the Address bar of a web browser and press enter. Click Network>Wireless (802.11)> IPv4 Configuration. Click Manual IP> Suggest a New Manual IP Address. Change the DNS to 209.244.0.3 & 209.244.0.4.
Apply the settings, restart the printer and try again.
Let me know if this worked.
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Input value given on web page is not getting pickedup in event handler

Hi friends,
I have created one simple page in SE80 with program with flow logic option, in which I would like to show business partner details from BUT000 table with the input of partner number. But the thing is the input value(partner no.)which I am giving on web page is not getting picked up in selection in event handler though I am giving input value it is becoming initial while selecting. What could be the reason?
Below I am mentioning the code which I have written in even handler for OnInputProcessing event.
CASE EVENT_ID.
WHEN 'select'.
NAVIGATION->SET_PARAMETER( 'partner' ).
SELECT * FROM but000 INTO TABLE I_but000 WHERE partner BETWEEN partner AND partner1.
WHEN OTHERS.
ENDCASE.
Thanks in advance,
Steve

Hi Abhinav,
I tried with the one you posted. But it is giving run time error as shown below.
Note
The following error text was processed in the system CRD : Access via 'NULL' object reference not possible.
The error occurred on the application server crmdev_CRD_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: ONINPUTPROCESSING of program CLO24DDFJW575HVAQVJ89KWHEHC9OCP
Method: %_ONINPUTPROCESSING of program CL_O24DDFJW575HVAQVJ89KWHEHC9OCP
Method: DO_REQUEST of program CL_BSP_PAGE===================CP
Method: ON_REQUEST of program CL_BSP_RUNTIME================CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_HTTP_EXT_BSP===============CP
Method: EXECUTE_REQUEST_FROM_MEMORY of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP
Regards,
Steve

Urgent!! PL/SQL web service can not get output param in BPEL

OC4J 10.1.2 generate PL/SQL web service can not get output param can not get output param in BPEL when call a pl/sql webservice.
wsdl as follow:
<types>
<schema targetNamespace="http://db.func.getqf/COMMON.xsd" xmlns:tns="http://db.func.getqf/COMMON.xsd" xmlns="http://www.w3.org/2001/XMLSchema" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<complexType name="db_func_getqf_COMMONUser_getqf_Out">
<all>
<element name="pnqfysOut" type="xsd:decimal"/>
<element name="pnzqfOut" type="xsd:decimal"/>
</all>
</complexType>
</schema>
</types>
<message name="getqfOutput">
<part name="return" type="xsd1:db_func_getqf_COMMONUser_getqf_Out"/>
</message>

the wsdl which generate by OC4J is as follows:
<?xml version="1.0" ?>
- <definitions name="COMMON" targetNamespace="http://db.func.getqf/COMMON.wsdl" xmlns="http://schemas.xmlsoap.org/wsdl/" xmlns:tns="http://db.func.getqf/COMMON.wsdl" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:xsd1="http://db.func.getqf/COMMON.xsd">
<documentation>WSDL for Service: COMMON, generated by Oracle WSDL toolkit (version: 1.1)</documentation>
- <types>
- <schema attributeFormDefault="qualified" elementFormDefault="qualified" targetNamespace="http://db.func.getqf/COMMON.xsd" xmlns:tns="http://db.func.getqf/COMMON.xsd" xmlns="http://www.w3.org/2001/XMLSchema" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
- <complexType name="db_func_getqf_COMMONUser_getqf_Out">
- <all>
<element name="pnqfysOut" type="xsd:decimal" />
<element name="pnzqfOut" type="xsd:decimal" />
</all>
</complexType>
</schema>
</types>
- <message name="getqfOutput">
<part name="return" type="xsd1:db_func_getqf_COMMONUser_getqf_Out" />
</message>
- <message name="getqfInput">
<part name="param0" type="xsd:string" />
</message>
- <portType name="COMMONPortType">
- <operation name="getqf">
<input message="tns:getqfInput" />
<output message="tns:getqfOutput" />
</operation>
</portType>
- <binding name="COMMONBinding" type="tns:COMMONPortType">
<soap:binding transport="http://schemas.xmlsoap.org/soap/http" style="rpc" />
- <operation name="getqf">
<soap:operation soapAction="urn:db-func-getqf-COMMON/getqf" />
- <input>
<soap:body use="encoded" encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" namespace="urn:db-func-getqf-COMMON" />
</input>
- <output>
<soap:body use="encoded" encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" namespace="urn:db-func-getqf-COMMON" />
</output>
</operation>
</binding>
- <service name="COMMON">
- <port name="COMMONPort" binding="tns:COMMONBinding">
<soap:address location="http://localhost:9700/plsqlgetqf/getqf" />
</port>
</service>
</definitions>

Axis - Web service is not getting deployed on https

I am using axis api for creating web service and Tomcat to deploy it. When I deploy the web service first time, it works perfectly, but If I upgrade my web
application, the server-config.wsdd file gets deleted from WEB-INf directory of my web application.
If I try to deploy the web service again, it does not get deployed on https, but on http it gets deployed. I am using following commands to deploy the web
service:
On HTTPS:
java -Djavax.net.ssl.keystore=/root/.keystore -Djavax.net.ssl.keyStorePassword=password org.apache.axis.client.AdminClient -lhttps://localhost/serviceURL
deploy.wsdd
HTTP:
java org.apache.axis.client.AdminClient -lhttp://localhost/serviceURL deploy.wsdd
When I deploy the web service on http, the server-config.wsdd file gets created automatically and the web service gets deployed, but the problem is on https.
Web service does not gets deployed on https and the server-config.wsdd file is not created. Even if I create the server-config.wsdd file manually, the web
service does not get deployed on https. Once I deploy the web service on http, I am able to deploy it on https.
Please help resolving the issue. Thanks.

Hi Reema,
Thanks for your reply.
But here I am not doing replication, I am working on initial upload of vendor master.
For all the standard fields its working fine.
but we have some 'Z' fields so I enhanced the web service with 'Z' fields after that I am not able to save and activate the web service.
Please find above screenshot for error.
Please let me know if I am missing some setting or anything.
Thanks,
Sudhir

Master data is not getting enabled in the InfoSet.

Hi Experts,
I have 3 DSOs in an InfoSet and I have also brought 2 Master data infoobjects in this infoset.
The master data check box in the infoset is not enabled and also not getting displayed in the Query Designer.
Can anyone please let me know how do I bring the master data in the query???
Also please advice me whether I should have only 3 DSOs in the infoset.
Please help.
Thanks

Hi,
In my DSO I have an InfoObject called Emp No. in the Data Field.
The Emp.No is being maintained as master with (Emp Name, Address, Telephone No, DOB) as attributes.
I have loaded the data in the Emp. No master. Then tried loading the transaction data in DSO.
The Emp.No is there in the DSO active data, but in the query designer its not getting displayed.
Hope its clear.
Please help.
Thanks

After saving GRN part1 tab not get enabled

Hi,
All excise details get reflected in GRN from PO , i have entered all details such as excise number, Excise date etc related all data
excise.
But after saving GRN part 1 tab not got enabled which contains serial number , part1 number . which is not case of other GRN.
Please help me why this is so ?
Regards,
Rajendra D. Sawant.

Hello,
Please can you confirm are you working in ECC 6.0.
Please check the material and vendors are mentioned in J1ID table. If J1ID does not contain the material and chapter id combination ,then system will not give you, excise tab in MIGO.
And
After save of MIGO system will not show excise or part1 tab in MIGO display This is sap standard. you have to check in J_1IPART1 table with ref to Material doc number.
Regards
Mahesh Naik

Cloud service web role did not get request

Hi Team,
we have an application host in web role in a cloud service,
sometimes it keeps loading when clicking a button in GUI and got no response till our GUI timeout (30 minutes)
we use Fiddler to trace the http request and also check IIS logs and found that sometimes the web role didn't get a request, sometimes the IIS
got the request and finished to processe the request but didn't return result to GUI.
it seems the message lost during interaction between UI and web role.
note that this problems comes out just recently.
is there some known issues related with this kind of problems.
thanks in advance.

hi Baker,
Firstly, I need confirm what's meaning is GUI from your description ? The GUI is your cloud service project UI? Or your UI in your client?
Secondly, base on my experience, we usually could occur timeout error because of the azure load balancer and the long time request.
For this error, I recommend you refer to those thread:
Azure Web Role - Long Running Request (Load Balancer Timeout?)
Windows Azure Load Balancer TimeOut for Cloud Service Roles (PAAS Web/Worker)
Windows Azure Load Balancer Timeout Details
http://social.msdn.microsoft.com/Forums/windowsazure/en-US/89b283f0-dfca-49a7-99fe-c3b73d77ff6d/azure-load-balancer-sending-http-request-to-multiple-web-role-instances?forum=windowsazuredevelopment
If I misunderstood, please let me know.
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Web proxy settings not getting affected for Mozilla Firefox

I have an ISA Server setup as a web proxy in our domain environment . I have changed the proxy settings to the address of the new web proxy server for all the users in the domain by using group policy . Even the connection tab on the internet options have been disabled so that users wont be able to view the settings thereby preventing them from changing the proxy settings . It has been completed successfully . But when we tested the settings with various browsers by trying to access the blocked sites in our environment such as Facebook and other social networking sites , IE , Safari and Chrome seems to be detecting the proxy in the network and was blocking it but Mozilla Firefox and Opera does not seem to be affected by the change and users could have unrestricted access to the web . Please help me with how to configure mozilla firefox proxy settings using group policy edit .

I am facing a similar issue with the flash content on my website (appnina.com). Any flash content is not displayed on my website.
The problem is because of using flash plugin in Mozilla Firefox (21.0 - updated). The flash plugin does not get activated by default. That is whenever opening the site, the flash content is not displayed. It asks to click the activate button. This activation should be one time, however it always asks to do so whenever opening the site.
I just checked and found that this flash problem is not specific to my website but in general (youtube as well).
Let me put the screen shot of the same.
Any permanent solution to this. Let me check if I can delete the old plguin and download it again to solve this issue.
The problem seems to be because of compatibility problem of firefox with flash.
PS: Let me know if I need to start a new discussion thread on this ?

Web UI - Value not getting selected from drop down list .

Hi All ,
I am facing a problem in one of the fields which is enhanced with a drop down functionality .
I have created the GET_V_** method and also the GET_P_** method for the same .And finally I am able to see the values in the drop down list . But the problem is , when I am trying to select a value from the drop down no values are selected .
Can anyone plese help me in this as What has to be done .
I have taken references from few guides but I am not getting any clear idea of what has to be done .
Regards,
Ranjita

Hi Ranjita,
To trigger a round trip, you must have given the event name in GET_P method.
Same event handler would trigger.
Please put a break point in Event Handler in IMPL class, and in SET_attr method of the attribute in CN class and see if value is getting set properly or not. Final value that would be displayed on UI would be there in GET_attr method of CN class.
I hope it helps.
Thanks,
Rohit

Cisco Cius AnyConnect check box not getting enabled!

Folks,
Here we are evaluating the Cisco Cius, however, while trying to get the AnyConnect "check box" marked, it does not check it! Does anyone knows why? Anything specific done on CUCM? BTW, cucm 8.5.1. Any ideas?
Thanks,
Thiago Henriques

Hi,
In my DSO I have an InfoObject called Emp No. in the Data Field.
The Emp.No is being maintained as master with (Emp Name, Address, Telephone No, DOB) as attributes.
I have loaded the data in the Emp. No master. Then tried loading the transaction data in DSO.
The Emp.No is there in the DSO active data, but in the query designer its not getting displayed.
Hope its clear.
Please help.
Thanks

Web Service is not getting activated

Hi Experts,
We don't have PI in our landscape that's why I enhanced the web service 'BusinessPartnerSUITEBulkReplicateRequest_In' with some 'Z' fields directly in MDG box and also created binding in 'SOAMANAGER' for above service and it is showing as active.
Now, when I am going to these service via 'SPROXY' and trying to save I am getting error 'Proxy Generation: Error Occured', please find attached screensot.
And when I am trying to activate, its not activating and giving error 'Service Provide INTFII_MDG_BP_RPLCTRQ', please find attached screenshot.
Regards,
Sudhir Wakodikar

Hi Reema,
Thanks for your reply.
But here I am not doing replication, I am working on initial upload of vendor master.
For all the standard fields its working fine.
but we have some 'Z' fields so I enhanced the web service with 'Z' fields after that I am not able to save and activate the web service.
Please find above screenshot for error.
Please let me know if I am missing some setting or anything.
Thanks,
Sudhir

Web Services could not be Enabled (Office Jet 6700 Premium)

Hi,
     I've successfully connected my printer the internet via wireless connection. I can print from any computer over wifi. However, I cannot enable web services.
    I have tried every troubleshooting method available under the sun.
     Eg) Manually setting IP Addres and DNS, Restarting, Resetting to Default, Rebooting Router, updating router etc.
    All methods I have tried are also here (http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile-Printing-and-ePrintCenter/ePrint-Apps-Connecti...
I have read every forum relating to this issue and everyone seems to have had their issue resolved through all one or more of the methods I have already used. I am quite disappointed with having to spend so long getting my product to do what it is meant to do straight out of the box.
Any further guidance would be kindly appreciated,
            Kind Regards

Hi there, your frustration is understandable. It sounds like you have exhausted all the troubleshooting steps but if you haven't already, try using the manual DNS values in the image below in the printers embedded web server (EWS) settings. If you've already done this and your printer is only new let me know what country you are in and I'll provide you with a direct number for HP phone support as you may be entitled to a replacement.
Best.
If my reply helped you, feel free to click on the Kudos button (hover over the "thumbs up").
If my reply solved your problem please click on the Accepted Solution button so other Forum users may benefit from viewing the post.
I am an HP employee.

Video option not getting enabled in itunes

hi, in my itunes properties, when i go to the video tab...i have a problem, i cannot enable it, it wont let me do it, it is not highlighted, so i am unable to upload videos to my ipod, what shud i do. thanks.

Just to check, are any of the videos labeled as TV Shows?
Videos Labeled TV Shows Don't Appear on iPod
Also, is all of the software up to date?
iTunes
iPod Updater
Updating iPod's Software
btabz

Enable Task not getting triggered

Hi experts
In my Process Definition, I have a task say Task1 which has task effect as "Enable User or Access to Application" and say Task2 has task effect as "Disable User or Access to Application".
Here when I click on enable checkbox under Resource Profile, my task Task1 gets executed and enables the Application. The same will happens for Disable under same resource profile.
Also when I Disable the user at user profile level, the task Task2 gets executed and sets the RO status as Disabled. But my problem is that when I click on Enable at user profile level, the RO which is already disabled is not getting enabled. I can see Task1 task is not getting triggered.
Any early responses are appreciated.
Thanks in Advance

Look at the following System Configuration property:
XL.EnableDisabledResources
This should be set to TRUE. I think your environment must be showing it as the other way.
If that is not the case then are you sure that your user is getting Enabled with that action. Let us know, although I think that this should not occur.
Thanks
Sunny

Web servises is not getting enable

Similar Messages

Maybe you are looking for