Web servises

I don't know any thing about web services...could any one help by giving some documentation how to use and how to work on web services...

http://java.sun.com/webservices/

Similar Messages

How to use wsit with jeveloper for developing and testing web servises

hi, all. Just want to ask one realy simple quastion.
I'm new with web servises, so my question may be doesn't fall well into this section , but this community looks friendly for me and i hope to get some usefull links and advises.
First of all could anybody say me if i'm righ or wrong with the following suggestions:
1. What is the principal difference between axis 2 and wsit products? Do i understand right that they both extend or support so called jax-ws2 API and represent different approaches in that (are they competitors?), or this products serve for different sakes at all and could be used together? I want to understand without much digging how these products correlate with each other...
2. If i'm right what is oracle favor? And if oas standard supply doesn't include wsit, how to install and use this product for creating interoperable web servises in jdeveloper enviroment? ...or jax-ws 2.1 wasn't included in oc4j v10 and will be the part of v11 only?
Thanks in advance. Alex.
Message was edited by:
Timin
Message was edited by:
Timin

Both Axis and WSIT are not Oracle products - so I'm not exactly sure why would you post the question here.
JDeveloper has native support for JAX-RPC based Web services development in 10.1.3 and JAX-WS support in 11 - check out the online demos linked from the home page to see these in action.

How to create web servise for Material Master catalog

Hi Experts
We would like to have a web servise foe the material master catalog.
Please advise hoe we can implement this.
Thanks,
moshe

hi stein,
once you check below link it's helpful for your requirement :
<IRRELEVANT LINKS>
thanks,
Edited by: Prateek Raj Srivastava on Dec 12, 2011 9:34 PM

How to develop and test web servises with wsit in jdeveloper enviroment

hi, all. Just want to ask one realy simple quastion.
I'm new with web servises, so my question may be doesn't fall well into this section , but this community looks friendly for me and i hope to get some usefull links and advises.
First of all could anybody say me if i'm righ or wrong with the following suggestions:
1. What is the principal difference between axis 2 and wsit products? Do i understand right that they both extend or support so called jax-ws2 API and represent different approaches in that (are they competitors?), or this products serve for different sakes at all and could be used together? I want to understand without much digging how these products correlate with each other...
2. If i'm right what is oracle favor? And if oas standard supply doesn't include wsit, how to install and use this product for creating interoperable web servises in jdeveloper enviroment? ...or jax-ws 2.1 wasn't included in oc4j v10 and will be the part of v11 only?
Thanks in advance. Alex.
Message was edited by:
Timin
Message was edited by:
Timin

You have to use any type of Version Control (e.g subversion).
You can read about Version Control. But I will talk about subversion in brief description:
1- Setup subversion server.
2- From subversion server create new Repository and define users (or use users from active directory).
3- From JDeveloper Main Menu --> View --> Team -- > Versioning Navigator --> Create new connection to your subversion repository.
4- Create new ADF application in JDeveloper.
5- In Jdeveloper Main Menu ---> Versioning -- > Version Application -- > select the subversion connection.
6- Add the application in subversion.
7- All developer should make a connection to the repository they will see the ADF application.
8- Right Click on the ADF application --> Check Out.
9- All developer will take a copy of the ADF application in their local machine.
10- If developer make changes in the application he can commit changes to repository and all others users can update changes.
This is a quick and brief description of how to use subversion for team development.

Web servise response problem

Hello all. I use webservise in my web applicatiuon(Flex 3).I request to web servise and receive result with successully.
But sometimes I cannot result of web servise,because I receive this error messages.
1.Response cannot be decoded Raw responce/
2.RangeError Index '0' specified is out of bounds/
code example
<mx:WebService id="srv1" wsdl="http://localhost:8080/Report_/get_report_typesService?WSDL" endpointURI="http://localhost:8080/Report_/get_report_typesService" fault="defaultFault(event)">
     <mx:operation name="get_reports" resultFormat="xml"    result="get_input_data(event)" />
     </mx:WebService>
srv1.get_reports.send(parseInt(text_pasword.text));
var get_xml_reports:XML=new XML(evt.result);
     xmlListColl = new XMLListCollection(get_xml_reports.children()._report_name);

I tried surround try{}catch{}. servise is running and I receive.But still sometimes servise is not responsed and I still same error mesages
1.Response cannot be decoded Raw responce/
2.RangeError Index '0' specified is out of bounds/

Disscussion abt web servises

Hello every body,
IF I am using axis and I have deployed a web service implemented in java using jax-rpc soap. Do I explicitly need wsdl files for java client to communicate with the java server
If you can guide me what I need to do step by step it would be great.
thanks
with regards

HI,
Yes you need the WSDl file, because lets say you want to access teh web service on some other clinet based application, then in that case you need to generate proxy classes, and if you dont have proxy classes then there is no way any one can access your web service, so YES YOU NEED TO HAVE WSDL WHILE DEPLOYING YOUR WEB SERVICE.
Surya

Web servises is not getting enable

i have applied all settings like you told in last msg but it still showing msg "check your internet connection "
and i m having strong internet connection also

Hi @souru
If you are still having issues enabling the web services, please try using 209.244.0.3 for the Primary DNS server and 209.244.0.4 for the Alternate DNS server. These are Level3’s public DNS servers. I have found recently that the Laserjet series of printers work better with Level3’s DNS servers.
If you are still unable to enable the web services after doing the above, please call HP’s Cloud Services at 1-855-785-2777 if you live in the USA/Canada region. If you live outside the USA/Canada region please click here to find the Technical Support number for your country/region.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

MDM Web Servise Generator

I am trying to access the web service generator by entering the following URL :
http://<server>:<Port number>/mdm/WSGenerator
However, when entering the above URL with the server & port, i get the following error:
"Resource not available".
Could you tell me how to resolve the issue & access the web service generator?
Thanks,
Arvind

Hi Arvind,
Applications are case-sensitive, please try
http://<server>:<port>/mdm/wsgenerator
Regards,
Jitesh

Publish SQL as a WEB Service from Database (10.2) using OC4J (without JDev)

Hi,
I have been successfull in Publishing Web Service using SQL (DML) using :
1. Oracle Express Db 10.2
2. OC4J 10.1.3
Any Help Will be appreciated........ :)
NOTE: Oracle Documentation on Application Server SUCKS (Too Many Errors prints and Wrong Information in the Web Servises area including JAR file paths)
I can only use One parameter in the QUERY and a Second Parameter gives an Error.
java -jar ${ORACLE_HOME}/webservices/lib/wsa.jar -sqlAssemble -appName query -dataSource jdbc/OracleCoreDS -sqlstatement "updtProdTyp=update PRODUCT_TYPES SET NAME = :{newname VARCHAR} where NAME = :{oldname VARCHAR}" -dbConnection jdbc:oracle:thin:@localhost:1521:XE -dbUser store/store
INFO: [WSADBPlugin] endpoint setInterface: oracle.generated.SqlStmts, setImplementation: oracle.generated.SqlStmtsUser
INFO: java oracle.jpub.Doit -user=store/store -url=jdbc:oracle:thin:@localhost:1521:XE -dir=./src/server -codegen=jdbc -style=oracle/j2ee/ws/tools/wsa/db/webservices-common -style=oracle/j2ee/ws/tools/wsa/db/webservices10 -style=oracle/j2ee/ws/tools/wsa/db/webservices10literal -outarguments=return -datasource=jdbc/OracleCoreDS -sqlstatement.updtProdTyp=update PRODUCT_TYPES SET NAME = :{newname VARCHAR} where NAME = :{oldname VARCHAR} -sqlstatement.class=SqlStmts -package=oracle.generated -plsqlfile=SqlStmts_plsql_wrapper.sql,SqlStmts_plsql_dropper.sql -plsqlpackage=SqlStmts_plsql_wrapper -connscope=method -sqlj -d=./war/WEB-INF/classes -C-g
INFO: SqlStmtsBase
/usr/lib/oracle/xe/app/OC4J/D_My_Apps/src/server/oracle/generated/SqlStmtsUser.java:8: oracle.generated.SqlStmtsUser is not abstract and does not override abstract method updtProdTypiSS(java.lang.String[],java.lang.String[]) in oracle.generated.SqlStmts
public class SqlStmtsUser extends SqlStmtsBase implements SqlStmts, java.rmi.Remote
^
/usr/lib/oracle/xe/app/OC4J/D_My_Apps/src/server/oracle/generated/SqlStmtsUser.java:22: cannot find symbol
symbol : method _getProdTypBeans(java.lang.String,java.sql.Connection)
location: class oracle.generated.SqlStmtsBase
__jRt_0 = super._getProdTypBeans(__jRt_2, __onnScopeMethod);
/usr/lib/oracle/xe/app/OC4J/D_My_Apps/src/server/oracle/generated/SqlStmtsUser.java:85: cannot find symbol
symbol : method _getProdTyp(java.lang.String,java.sql.Connection)
location: class oracle.generated.SqlStmtsBase
__jRt_0 = super._getProdTyp(__jRt_8, __onnScopeMethod);
^
/usr/lib/oracle/xe/app/OC4J/D_My_Apps/src/server/oracle/generated/SqlStmtsUser.java:128: _updtProdTyp(java.lang.String,java.lang.String,java.sql.Connection) in oracle.generated.SqlStmtsBase cannot be applied to (java.lang.String,java.sql.Connection)
__jRt_0 = super._updtProdTyp(__jRt_10, __onnScopeMethod);
^
/usr/lib/oracle/xe/app/OC4J/D_My_Apps/src/server/oracle/generated/SqlStmtsUser.java:145: cannot find symbol
symbol : method _updtProdTypiS(java.lang.String[],java.sql.Connection)
location: class oracle.generated.SqlStmtsBase
__jRt_0 = super._updtProdTypiS(__jRt_12, __onnScopeMethod);
^
6 errors
INFO: NEW DBWS runtimeProperties set databaseJndiName: jdbc/OracleCoreDS
INFO: User classpath is :/usr/lib/oracle/xe/app/OC4J/D_My_Apps/./war/WEB-INF/classes
INFO: Checking for JSR-181 Annotations capabilities in current JVM...
INFO: Found JSR-181 Annotations capabilities. Checking for JSR-181 Annotations Processor...
INFO: Found JSR-181 Annotations processor. JSR-181 Annotations (if any) will be processed
INFO: No JSR-181 annotations found in specified class oracle.generated.SqlStmtsUser
FINE: ValueTypeModeler.log [creating model: query]
FINE: ValueTypeModeler.log [creating port: oracle.generated.SqlStmts]
FINE: MethodModeler.log [creating operation: updtProdTyp]
FINE: MethodModeler.log [creating operation: updtProdTypiSS]
WARNING: Problem validating implementation class. Access modifier problem detected for the implementation class oracle.generated.SqlStmtsUser: int updtProdTyp( java.lang.String, java.lang.String ) is defined with access modifiers that make it an unsuitable implementation of the interface method: The method cannot be 'abstract'.
Thu Mar 30 14:17:34
Thanks
====================================

I don't have the problem with the second arugument, using essentially the same command as yours. Could you make sure you clean up the following subdirectories and retry:
ear query.ear src war
My guess is that the leftover subdirectories in your previous run are playing game with you. You can simplify leftover management by specifying -output setting.

How to Create Web Service from RFC?

Hello Friends,
Can anybody tell me how to crete Web Service through RFC. Our client server has no SOAMANAGER. I have to proceed through WSADMIN and WSCONFIG. Please help me to create WS through these transactions.
Give me the step by step proces i have to follow.
Kumar

hi Kumar,
Refer this Doc:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c05b36f9-e7d4-2910-4488-a46be7ba2906
How to consume the Web Servise
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/6066fbe8-edc4-2910-9584-a9601649747d
regards
Vivekananthan.S

Oracle ADF web services data control reconfiguration problem....

We fallow instruction below
http://www.oracle.com/technology/products/jdev/viewlets/1013/bpelfromadf_viewlet_swf.html
That was our test environment.
we need to change web service url according to our production environment.
But we can't find ADF web services data control configuration pages.
do we need to manually change XML file.
Thanks..

sorry. I miss the structure windows..
I see the menu.
in my opinion this setting need to be done on the item.
Also We can't refresh Web servise parameter list from there.
is tehre any where to refresh parameter list.

Error:1067 - Implicit coercion of a value of type QName to an unrelated type QName

hi,
I'm new in flex and my english not good. I'll try to explain
my problem :(
I have an application mxml and a component mxml. I imported a
wsdl from .net webservice.
In main mxml I added:
<mx:Application .....
xmlns:webservices="generated.webservices.*"/>
and
<webservices:xService id="m_service"/>
there is no problem for this. But when I added into component
mxml like this:
<mx:Canvas.....
xmlns:webservices2="generated.webservices.*"/>
and
<webservices2:xService id="m_service2"/>
I'm getting the following error:
error line sample: (and 633 similar lines in
generated.webservices)
responseMessage.wrappedQName = new QName("
http://tempuri.org/","GetMemberListResponse");
error:
1067: Implicit coercion of a value of type QName to an
unrelated type QName
When I removed the <webservices2:xService
id="m_service2"/> line from component mxml, I'm not getting an
error.
Flex 3.0 - sdk 4.0
Thanx for your helps

thanx your answer,
I changed (like this:[WebService(Namespace = "
http://Info.WebService/MyInfoService"))
but it doesn't work. I still have same problem.
It's really strange problem. When I used in application mxml,
it's working. But when I used in component mxml, I'm getting error.
I tested the web servise in other test application mxml with
following code: (it's working excellent)
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="
http://www.adobe.com/2006/mxml"
layout="absolute" xmlns:webservices="generated.webservices.*"
creationComplete="test12()">
<mx:Script>
<![CDATA[
import mx.rpc.AsyncToken;
private function test12():void
m_service12.addgetFuelList_header(GetAuthHeader());
m_service12.getFuelList();
]]>
</mx:Script>
<mx:Script source="***/ServiceAuthHeaderGetter.as"/>
<webservices:TankInfoService id="m_service12"/>
<mx:DataGrid
dataProvider="{m_service12.getFuelList_lastResult}">
</mx:DataGrid>
</mx:Application>
And finally I closed "Enable strict type checking" from
project properties and the errors are disappeared.
But now I got new problems with webservice :)
TypeError: Error #1009: Cannot access a property or method of
a null object reference.
I guess <webservices:TankInfoService id="m_service"/>
is null.
But why?
in component mxml
I added xmlns:webservices="generated.webservices.*" namespace
and
<webservices:TankInfoService id="m_service"/>
my code is:
m_service.addgetMemberList_header(GetAuthHeader());
m_service.getMemberByUserPassword(this.txtUser.text,
this.txtPassword.text);
the error:
TypeError: Error #1009: Cannot access a property or method
of a null object reference.
Any ideas???

Multiple soap modules

hello,
i'm biulding a flex client that works with a soap web servise, i imported the wsdl though the wizard and all was good...
untill i had to use a diffrent module within the same webService.
the other module uses some of the same soap types as the first one(the type's name space is maped to the first module) and vice versa.
as a resoult when i try to import the secound module i get the following error:
The specified ActionScript package already contains a file with the same name
as one of the classes to be generated: <some class name>.as.
Try choosing a different ActionScript package or renaming the existing file.
so naturaly i used a diffrent package, now the problem is that now i have duplicates of the same class in diffrent pakages and one module is overwriting the class deffenitions of the other module in the SchemaTypeRegistry singleton and that is cousing all kinds of weird stuff to happen...
has anyone encounterd this or know how to solve this?
any help would be greatly appreciated.
peleg.

here are examples for the 2 wsdl's:
module 1:
<wsdl:definitions xmlns:tns="http://ns1.something.com/" xmlns:s="http://www.w3.org/2001/XMLSchema" xmlns:s2="http://ns2.something.com/" targetNamespace="http://ns1.something.com/" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/">
    <wsdl:types>
        <s:schema elementFormDefault="qualified" targetNamespace="http://ns1.something.com/">
            <s:import namespace="http://ns2.something.com/" />
            <s:element name="someSOAPElement">
            </s:element>
            <s:element name="someSOAPElementResponse">
                <s:complexType>
                    <s:sequence>
                        <s:element minOccurs="0" maxOccurs="1" name="someSOAPElementResult" type="s2:BillingResponse" />
                    </s:sequence>
                </s:complexType>
            </s:element>
            <s:element name="someSOAPType" nillable="true" type="s2:someSOAPType" />
        </s:schema>
        <s:schema elementFormDefault="qualified" targetNamespace="http://ns2.something.com/">
            <s:complexType name="someSOAPType">
            </s:complexType>
        </s:schema>
    </wsdl:types>
    <wsdl:message name="someSOAPElementSoapIn">
        <wsdl:part name="parameters" element="tns:someSOAPElement" />
    </wsdl:message>
    <wsdl:message name="someSOAPElementSoapOut">
        <wsdl:part name="parameters" element="tns:someSOAPElementResponse" />
    </wsdl:message>
</wsdl:definitions>
and module 2:
<wsdl:definitions xmlns:tns="http://ns2.something.com/" xmlns:s="http://www.w3.org/2001/XMLSchema" targetNamespace="http://ns2.something.com/" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/">
<wsdl:types>
    <s:schema elementFormDefault="qualified" targetNamespace="http://ns2.something.com/">
      <s:complexType name="someSOAPType">
      </s:complexType>
      <s:element name="someSOAPElement">
      </s:element>
      <s:element name="someSOAPElementResponse">
        <s:complexType>
          <s:sequence>
            <s:element name="someSOAPElementResult" type="tns:someSOAPType" />
          </s:sequence>
        </s:complexType>
      </s:element>
      <s:element name="someSOAPType" nillable="true" type="tns:someSOAPType" />
    </s:schema>
</wsdl:types>
<wsdl:message name="someSOAPElementSoapIn">
    <wsdl:part name="parameters" element="tns:someSOAPElement" />
</wsdl:message>
<wsdl:message name="someSOAPElementSoapOut">
    <wsdl:part name="parameters" element="tns:someSOAPElementResponse" />
</wsdl:message>
</wsdl:definitions>
the soap decoder uses mx.rpc.xml.SchemaTypeRegistry, witch is singleton, to map the soap types calss definitions, thus the definitions are shared by all the modules in the application...

Uniqueness Constrain violation:exception"BusinessProcess.proxy.SercieError"

HI ,
While creating the web servise proxy by using of WSDL doc URL
http://soa6.com:8888/integration/services/IdentityService/configuration?WSDL
( of PortName ' IdentityConfigServicePort') . I am getting the exception like
uniqueness Constraint violation : exception "BusinessProcess.proxy.SercieErrorType" already found.
Please help me how to resolve this issue.
Thanks in advance, ....

Hi Calvin,
You may want to try the 'no data binding' option on the proxy generation. This may enable you to go ahead, with a proxy that is not trying to generate Java code.
Yo can also try to make a local copy of your WSDL and remove the duplicate type declaration. Using the analyze command from WSA CLI is a quick way to do this itterative testing, as it will not generate the code. Once you have the analyze command going thourg the WSDL, you can go back to using genProxy.
You can find the documnetation here:
http://download.oracle.com/docs/cd/B32110_01/web.1013/b28974/wsassemble.htm#CHDBBDBF
Hope it helps,
-Eric

Convert() through JavaScript

I currently have the applet embedded into a webpage and I wish to create a bitmap of the model to store and call back up elsewhere in my web application.
When I call the function that should do the convert I get the following:
Uncaught Error: java.security.AccessControlException: access denied ("java.io.FilePermission" "TestFile.bmp" "write")
Currently I was just aiming to save the file near the applet on the server so haven't included an output directory or anything like that, the same error still appears however when I try full paths to either my local machine or relative paths elsewhere on the server etc.
The code I am using is below, am I missing any extra steps out or is there something I can do to give the applet the correct permissions to do this?
var convertOptionsClass = jApplet.getClass("com.cimmetry.core.ConvertOptions3D");
var convertOptions = convertOptionsClass.newInstance();
convertOptions.setOverwrite(true);
convertOptions.setFormat("PCRS_BMP");
convertOptions.setFileName("TestFile.bmp");
jApplet.getActiveVueBean().getController().convert(convertOptions);
Edited by: 986996 on Feb 22, 2013 2:57 AM

Hi,
It is likely that your JVM does not have enough permissions (<JRE>\lib\security\java.policy).
Try adding permission java.security.AllPermission; in the grant block to check if it helps.
There are other alternatives that you might consider for your application:
- jApplet.getActiveVueBean().renderOntoGraphics() to render onto a graphics created from an image.
- Using our Web Servises to convert or to generate a thumbnail.

Web servises

Similar Messages

Maybe you are looking for