Web Setup Step by Step

Hi,
Is there a document on How to setup a web application in BW 3.5 for use of web report functionality.

Hi Mohd,
i think that is what you are searching for "How to… Enable SAP BW Web functionality after a new BW inst."
Link to Service Marketplace: https://websmp109.sap-ag.de/~sapdownload/011000358700002121302004E/HowToConfigWeb30.pdf
Dont forget points.
Best regards,
Adem

Similar Messages

  • Setup of Xwindows - step by step guide for SLES 11.3 reqd

    Hi
    I have used Unix before but I am new to SLES and I need to run a gui based installer on a new AWS image of SUSE 11.3.
    I wanted to remove Putty/SSH complications from the equation so for now, to check if XWindows is working I directly connected to the SLES desktop using xRDP as ec2-user, and from xterm I issued the following commands:
    su - root
    export TERM=xterm
    export DISPLAY=localhost:0.0
    After checking the variables, I launched xclock but it fails making me conclude that Xwindows is not correctly configured or running.
    Can anyone point me towards a step by step guide on how to setup XWindows, or given my dated knowledge, is there a better way to run a gui-based program?
    Regards
    Ratna

    A couple thoughts:
    1. If this is just SLES (and not Open Enterprise Server (OES) then you
    may want to post in the SUSE forums (https://forums.suse.com/) using the
    same credentials that you used to access this site.
    2. It sounds like you have X working already since you were able to acess
    the system using xRDP. Is there a reason you cannot just start the
    installer from there? Alt+F2 to run things usually, I think. If you are
    using Gnome, I think 'gksu' or 'gksudo' will start things as a privileged
    user from the current non-root user after sufficient credentials are
    entered; from the KDE side of things I use 'kdesu' all of the time for the
    same thing. This avoids loading a shell, changing to root, forwarding X,
    etc. as you are trying to do.
    3. Going back to your attempt, I do not see you allowing access to your X
    session anywhere so that 'root' can connect with its new process. Before
    you change to root, you need to instruct your current X session to allow
    other users to throw things onto your desktop (usually not a good thing).
    The easy way is to just run 'xhost +' from a shell, maybe before running
    'su'; note that if other users are on the system they can now send shells
    your way forever, and that may not be fun.
    Good luck.
    If you find this post helpful and are logged into the web interface,
    show your appreciation and click on the star below...

  • Step by step complete setup for WRT54G ver.6 with Laptop and XBOX 360

    Hello.  I am sorry to post this, I am sure it is a juevenile and redundent question...but I have tried to look for the set up cd (I can find where to download it...though I can find the firmware upgrade or whatever).  My friend at work said it would do all the setup pretty much automatically for me.  
    I somewhat know computers, but you might go ahead and make your replies VERY lamen's terms or I might not be able to follow.  Anyways, what I need, is a step by step/screen by screen directions for a secure network.  I have made a partial attempt at setting it up and it technically works, but I would feel better if I did the steps a-z in order, so I know that it is done correctly.  I also am not totally confident in its security as it is now.  (Also, technically, I did not check the XBOX again after getting the new laptop, I am just assuming it is still working because it was before).
    My problem is I can't seem to find very good directions for setting up the router...I only find partials or confusing directions.
    So here are the things I am trying to connect:
    Liksys WRT54G ver. 6
    Gateway Laptop running Windows Vista
    XBOX 360 - WIRED
    (I had a PC and a laptop, but they both died at the same time and I have only been able to replace the laptop at this point...the PC will come later and not sure at this point if it will be Wired or not).
    I have a cable Modem between the Router and the wall...I didn't look at that for brand/etc...but I can get it ASAP if needed.
    Here are the settings that I have so far:
    Changed the Router Name
    Changed the SSID
    Have DHCP set to 3  (XBOX, PC, Laptop)
    Wireless SSID Broadcast: Disable
    Username and Password changed to my own info
    UPnP: Enable
    I may have changed other things without knowing it.  So like I said, a complete, step by step screen by screen set up would be totally appreciated.  I haven't done anything in the security tab, all that is totally foreign to me, so I am just not broadcasting for now until I can get some help setting things up with you guys.
    And if someone is familiar with the Laptop/XBOX 360 setup, and I need to change any of the settings on the XBOX itself, could you please include that in your directions?  I know that isn't technically what THIS forum is for, but it would sure be helpful to me if you happen to know both parts anyways.
    Thanks a lot (in advance)!

    So all you just need to do is, secure your Wireless Network. Follow the setps bellow and change the settings on your Router.
    Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...
    For Wireless Settings, please do the following : -
    Click on the Wireless tab
    - Wireless Network mode should be mixed...
    - Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
    - Set the Wireless channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
    Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
    For Wireless Security : -
    Click on the Sub tab under Wireless > Wireless Security...
    Change the Wireless security mode to WPA, For Encryption, select TKIP...For Passphrase input your desired WPA Key. For example , MySecretKey , This will serve as your network key whenever you connect to your wireless network. Do NOT give this key to anyone and remember the key.
    NOTE : Passphrase should be more that 8 characters...
    Now see if you can locate your Wireless Network and attempt to connect...
    Click on Advanced Wireless Settings
    Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
    Now see if you can locate your Wireless Network and attempt to connect... 

  • I didn't setup a two step verification for my apple Id , and then when i login into my account on the browser it prompt to enter my verification code !!! HOW COME

    i didn't setup a two step verification for my apple Id , and then when i login into my account on the browser it prompt to enter my verification code !!! HOW COME
    please help because all my data are stored in the cloud

    - See if it is listed here for downloading. If it is then redownload it..
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    - If not there then contact iTunes.
    Contact iTunes

  • Step by step Installation ON ABAP,XI,Web dynpro ABAP and JAVA On my PC??

    Hello Friends,
      I would like to Install SAP-ABAP ,XI ,Web dynpro ABAP and Web dynpro   JAVA    on my PC.
      Please Let me know What configuration is required for all the above.
      Please Give me the Step by step procedure for all the above.....??
      I want to Instal all the above and Give me suggestion on that???
      Can I use Vista for Sap Installation????
    It would be great If you send the step by step procedure to my personal ID
    [email protected]
    Thanks in Advance
    Preethi D

    Hi,
    Step step description here is not possible.
    It always advisable to go to service.sap.com/instguides.
    slow and steady wins the race.
    good luck.
    It's advisable to have quad processor with atleast 8GB ram.
    If it's a nw04s then at a shot you can select AS ABAP. JAVA, EP, PI(XI) and proceed.
    hope this helps you.
    reward suitable points.

  • I'd like step by step instructions on Ipodtouch setup after establishing itunes account which I already have. For example, which service,app downloads,etc.

    I'd like step by step setup for iPodtouch after setting up iTunes account which I already have.For example, how to setup the screen with the necessary screen icons ,camera ,music ,mail, etc. I'm at the stage where it asks for service to choose from and I don't know which service to answer with.

    I do not know what you mean by service?
    Tyt downloading/reading the manual
    iPod touch User Guide (For iOS 5.0 Software)

  • Anyone aware of a step by step guide to setup lion server?

    Anyone aware of a step by step guide to setup lion server? Looking to bin my SBS and movr to lion server but need an idiots guide to step by step setup.

    Hi Joe,
    Thanks for the info. Was also looking for a step by step guide on installtion of all the different modules, i.e. mail, profile manager, wiki for example. Maybe im just to use to windows server but the mac server just seems too simple. Maybe i am over complicating things.

  • How to create A web services step by step and their uses

    How to create A web services step by step and their uses with their T-Codes
    pls dont send any links
    thank you
    Regards,
    Jagrut Bharatkumar Shukla

    Hi
    Use the Tcode <b>WFWS</b> to create the Web service
    enter the Transaction to whih you wants create the web service and save
    Regards
    Anji

  • How to setup an IC Matching application in SAP BPC step by step query...

    Hi there, I have a query...
    I downloaded the "How to... Setup an Intercompany Matching Application in SAP BPC" pdf file. Then i read it and eventually followed the step by step solution but as I do it, i was stucked with the step number 71. It's because the result of what i did was not the way it should look like. I mean, the result is different from the picture that is being shown in the file. As a matter of fact, i've encountered 2 messeges ff:
    error 1
    [http://farm3.static.flickr.com/2743/4464421462_15711a509d_o.jpg]
    error 2
    [http://farm5.static.flickr.com/4020/4464421410_ac8a3efb5c_o.jpg]
    what should I do? Is there anything that I did wrong?
    This is the 71st step anyway,
    [http://farm5.static.flickr.com/4055/4463657105_d217f23a71_o.jpg]
    I actually tried both members, but i received same errors...
    Thanks for help, folks! God bless!

    Hi Will,
    Thanks for reply... Actually, I've tried that before(putting comma after the flag "all," presuming the 71st step shows that I should have 3 members in the memberset under the ICDatasrc dimension. But it also did not work.
    Nope, step 71 did not tell us to use piping and consequently expanding the col key range.
    Thanks...
    Dryan

  • How start setup step by step ?

    Hello,  ... I've got a problem with my MSI 925X Neo 54G PE motherboard (electric current short cut down) and I want to know how start setup step by step to find troubleshoots ? Thanks.

    When I press on/off button, computer start normaly and stop during setup with message :
    DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER
    The problem, there is no error message before and I don't know where is the troubleshoot during setup sequence.
    I already try to rescue system with WinXP CDROM : fixboot and fixmbr ... but nothing do. If I press F8 during setup I can access to boot screen and when I choose my HDD, Win start normaly with all its function ok.
    I already have a troubleshoot like this there is six month ago, and solution have been to modify BIOS setup. So, my hope is to run setup step by step to find troubleshoot message and post it here. Thanks.

  • Developing Web Services: Three Easy Steps tutorial error

    I'm following the tutorial Developing Web Services: Three Easy Steps, the first lab. I created the GetDates POJO, no problems. Then I went on to step 4 and am creating the WS for the java class. I get to step 5 where I've gone through the wizard for the web service and at step 5 in the wizard the tutorial says to click finish. When I click finish I get a popup saying
    Validation Error
    Files at the following URLs cannot be modified:
    file:/C:/jdevhome/jdev/.....GetDates/public_html/WEB-INF/webservices.xml
    and the same path but oracle-webservices.xml
    Anyone else experience this when going through the tutorial? I'm not sure where the tutorial is on OTN or if it's on OTN yet. It's a tutorial I did in a session at OpenWorld and now i'm going through it locally now that we have the latest SOA suite installed.
    Any thoughts?
    Thanks, Rob

    Just checked and it's not running. It's preventing the web service from being created, none of the directories are getting created since it's erroring.
    I tried closing out and opening JDev up again and it's my C drive so I don't have anything set to read only.
    JDev Studio Edition Version 10.1.3.1.0.3914
    Rob

  • How to Setup SCCM 2012 to manage Application step by step!!!

    Dear everybody,
    My company is making plan to deploy SCCM 2012 to manage PCs list after updating through WSUS
    Please help me for guied to setup it step by step
    Thanks for your help!!!

    And here are the guides from Gerry as well,
    http://gerryhampsoncm.blogspot.se/2013/02/sccm-2012-sp1-step-by-step-guide.html
    There are many great books out there as well, Configuration Manager is a complex product so I would recommend som training and or a good book as well as a compliment to get you started.
    Regards,
    Jörgen
    -- My System Center blog ccmexec.com -- Twitter
    @ccmexec

  • Need step by step instructions for wireless security setup on my westell modem

    I tried setting up security shortly after getting the modem, but I had trouble getting vista laptop to work with the security settings. I don't feel like figuring this all out. I would like step by step instructions for my modem. It is the Westell VersaLink 327W. If these instructions are on a web site somewhere that would be great.
    Thanks.

    I think I just answered my own question. I exported to my desktop and then added it to my iDisk.
    If anyone has any other tips, that would be great. Not sure how to set up the size of the frames.

  • Step-by-Step procedure for Web Reporting

    hai
    Im new to Web Reporting. Can anyone tell how to do the Web Report by using the WebApplicationDesigner.
    Please tell me step-by-step method for creating the Web Report .
    Then how can put it into Portals
    I will assing the points
    kumar

    Ravi,
    Open WAD ,
    LOGIN into WAD
    once the new template opens up - drag and drop the table web item from the left
    click on the table web item
    On the leff you will see properties ( there assign a query to the dataprovider)
    On the menu you will see an execute in browser button
    click on it
    Save your template
    the output is available on the browser...
    Arun
    Hope it helps...

  • Is there an FAQ or step by step tutorial for personal web sharing?

    First off, if anyone knows of an FAQ somewhere that answers this question, post me the link.
    Am trying to build a comon web page for synching iCal on a stans alone machine and am sure this is a very common question from new iCal users like myself:
    Situation:
    -Multiple users on same iMac
    -Different accounts Mom, Dad, Kids, Nanny
    -Need to collaborate schedules
    Want to create a webpage on my machine (without .mac) where we can publish calendars.
    Tried turning on personal web sharing in the system preferences but the addresses listed only show a page listed as "Access Forbidden."
    Is there a step by step tutorial out there? I could really use one.

    Thanks to all for replying. The information posted was very informative and answered my questions asked.
    I guess the real answer for me the very novice and deliberatly blissfull user is: No.
    I switched to Mac after assembling my own PCs to try and get then to do what I wanted. The driver/dll/ini issues were maddening!!!
    Am not tech-phobic, but am loathe to start working in the terminal and with code since I know so little and it was that commercial that said "I got tired of being my own tech dept." that made me switch.
    Looked at the tutorials and there are always comments underneath with comments about how there is a typo here, mispelling, there, better code over yander etc. linux/apache/unit/windows flame wars etc.
    All I want it to do is work or not. Since it is not; will find another way.
    Between purusing sites I think I came up with a simple low tech solution.
    In the shared folder create an iCal_Shared folder. From one user export a calendar complete with a date. For example Dad's work as of 15 JAN. Then in the duaghter's calendar import the same calendar. Knowing that as changes are made by me, I will have to update the exported file, and my daughter will have to be aware of the as of dates.
    A lot of solutions out there are for the corporate world. Am happy to Apple gaining market share but I am on a stand alone machine.
    The iPhoto manager is a great product from a third party and was happy to pay for it. Saves me a lot of time with 20K+ pictures.
    Just want an app causing iCal to behave simply, ie my daughter and I could share calendar information on our machine without running WebDAV server, a three tiered digital satelite hookup, etc,
    Pie Argh Squarred..It seems to me that Apple woule be better off if they came up with solutions like that that cost $20 since they would reach a lot more people than they are now with the $100 annual .mac extortion fee.
    Kudos to those of you who are much smarter and braver than I and again I thank you for your posts as they have opened my eyes as to just how old I am getting! Perhaps my daughter should solve this one for me!

  • Is there any step-by-step document to setup OEM of oracle DB ?

    We use oracle 11g DB for Oracle Argus in win2008R2.
    It looks customer oracle 11g DB is not configured for OEM. I saw member login by SQLplus.
    Is there any step-by-step document to setup OEM of oracle DB in windows2008R2 ?

    We use oracle 11g DB for Oracle Argus in win2008R2.
    It looks customer oracle 11g DB is not configured for OEM. I saw member login by SQLplus.
    Is there any step-by-step document to setup OEM of oracle DB in windows2008R2 ?

Maybe you are looking for