Web sharing doesn't work on reboot

I have to turn Web Sharing on and off to make it work after a reboot. I'm not sure when this started as I use Web Sharing intermittently for developing web sites.
Trying to access on my Mac I get
Safari can’t open the page “http://localhost/~me/” because Safari can’t connect to the server “localhost”.
Works fine after going to Sharing and turning Web Sharing off and back on.
I'm sure this has been covered but haven't had any luck searching.

Toshiba knowledge base - how to fix webcam - http://forums.toshiba.com/t5/Video-Display-Knowled​ge-Base/How-can-I-fix-my-webcam/ta-p/281393
Here is another post that gives some suggestions - http://www.pcauthorities.com/pc-errors/how-to-fix-​webcam-problems/
S70-ABT2N22 Windows 7 Pro & 8.1Pro, C55-A5180 Windows 8.1****Click on White “Kudos” STAR to say thanks!****

Similar Messages

  • Web sharing/Apache not working

    My web sharing doesn't seem to be working.
    When I have it enabled in the Sharing panel of the System Preferences, I try to click on the link
    My Computer's Website
    http://myIPaddress
    I get an error message, in both Safari and Firefox, saying that I cannot make a connection to the server. This is similar to other threads in this section except for the following:
    - I do have a /var/log/apache2 directory
    - I did a chmod 755 on the directory
    - the directory is empty
    - http://localhost does not work
    when I look through a list of my tasks (on the Activity Monitor), I don't see anything related to apache so I'm wondering if my Web Sharing has not initiated the apache server.
    I'm running 10.5.6 on a PowerBook G4.
    Thanks in Advance

    You shouldn't see any apache items in Activity Monitor. I've got web sharing on, and I see a bunch of httpd processes in Activity Monitor. Try repairing permissions on your hard drive. Also, look for some config files located in /etc/apache2/. I see the following files/folders in there on my machine:
    drwxr-xr-x 13 root wheel 442 Nov 24 2007 extra
    -rw-r--r-- 1 root wheel 17684 Jan 27 07:21 httpd.conf
    -rw-r--r-- 1 root wheel 12958 Nov 24 2007 magic
    -rw-r--r-- 1 root wheel 28782 Nov 24 2007 mime.types
    drwxr-xr-x 4 root wheel 136 Aug 13 2008 original
    drwxr-xr-x 4 root wheel 136 Nov 24 2007 other
    drwxr-xr-x 3 root wheel 102 Aug 13 2008 users

  • Lumia 920 - internet sharing doesn't work: Connect...

    Hello all,
    I'm experiencing a serious problem with the lumia 920. It seems impossible to share my internet connection. Something I normally use for several hours a day. If this problem can't be fixed soon, ill be forced to swithc back to iphone or htc.
    Problem description:
    When turning "internet sharing" on:
    Connection not shared - There is no cellular data connection to share right now. Check your cellular settings and signal, and try again.
    Important remarks
    Belgium - cellular provider is Mobistar
    I can browse, sync email, etc over the provider's network ans send and receive MMS.
     Provider does not block internet sharing. Have always used this.
    OS Version 8.0.10211.204
    Firmware revision: 1232.5957.1308.0002
    Access point :
     Nokia Access Point version:3.4.1.7 - db 2.0.0.100 - lib 1.2.0.7
     The default access point provided in the Nokia Access Point app does not work: can't even browse.
     Using a manually added APN:
     Data type (default / LTE) tried both. Everything keeps working - except internet sharing...
     APN pro.web.be  (for professional subscribers)
    MMS APN mms.be
    MMSC address: https://mmsc.mobistar.be
    What have i tried to remedy the situatiuon?
     updated the Nokia Access Point app
     changed language to spanisch using OTA update (silly, but read on a forum this might help)
     soft reset of the phone (often!)
     deleted the manually created access point
     Hard reset of my phone
    I'm interested, of course, in any tips to solve this serieus bug / issue / problem.
    (my best guess is that Nokia tries to help their customers with the Access point app, but fails to do so).
    Please, if any of you experience the same problem please respond to this post so we can get an idea about how big of a problem this is.

    Hi,
    I had the same problem. But I let it go after weeks of corresponding with Mobistar.
    Yesterday I went to a Mobistar shop, the guy tried lots of thing I already tried (different apn's, ...).
    Then he told me the it's a problem with business clients. They have to use the apn web.pro.be, where internet sharing doesn't work (he doesn't know why).
    But, that if I call to Mobistar and ask to activate apn mworld.be on my telephone number, it should work.
    Today I called Mobistar Business (you can find the helpdesk number on your invoices), asked to activate mworld.be to have internet sharing access on a windows phone.
    Half an hour later, using mworld.be as apn i have internet access, and I can share my internet connection.
    regards,
    Stijn

  • Lync screen sharing doesn't work in Windows 10 Technical Preview (9879 Build)

    Why Lync screen sharing doesn't work in Windows 10 Technical Preview?
    It works well Windows 8.1, but why not in Windows 10?

    Hi PriTeddy,
    Thanks for your feedback.
    As Paul Adare said, Microsoft has noticed such issue, they are listed in following blog:
    http://blogs.windows.com/bloggingwindows/2014/11/12/new-build-available-to-the-windows-insider-program/
    Some known problems:
    As with the last build, you’re getting hot-off-the-presses code which means there are a few issues. We’ll be publishing WU updates shortly to fix the first two, but the remainder will not be fixed for 9879.
    •In some cases you may get a black screen when trying to log-in or unlock. The only option is to hold the power button to hard reboot.
    •You will be unable to connect to Distributed File System network locations.
    •Some systems may see disk growth of 20GB+ due to driver install duplication. On systems with low disk space this can block setup and cause a rollback to the previous build.
    •Skype calls will disconnect and Music will stop playing if those apps are minimized.
    •There are several known issues with screen sharing with Lync.
    Let’s wait for next builds.
    Alex Zhao
    TechNet Community Support

  • In Safari, the link to "mail this web page" doesn't work, and the share link shows "no service". Does anyone have a solution? I have a MacBook Pro and upgraded to Yosemite yesterday

    In Safari, the link to "mail this web page" doesn't work, and the share link shows "no service". Does anyone have a solution? I have a MacBook Pro and upgraded to Yosemite yesterday.

    See here:  If sharing options and Markup are missing after you install OS X Yosemite
    This resolved the issue for me.
    Rick

  • How can I activate an old version of Photoshop that I've loaded on my new tablet? The web activation doesn't work, and when I call the number, it says it's not being used anymore. Meanwhile, I'm down to 13 days till it stops working due to not being activ

    How can I activate an old version of Photoshop that I've loaded on my new tablet? The web activation doesn't work, and when I call the number, it says it's not being used anymore. Meanwhile, I'm down to 13 days till it stops working due to not being activated. HELP?  I really need to continue using this product for my home business.It works fine not activated but the threat is that it will stop working in 13 more days if I don't get it activated, and none of the activation methods they list seem to work.

    The new serial number is to the right of your chosen download.

  • Smart Web Printing doesn't work in IE9

    Smart Web Printing doesn't work in IE9...
    This question was solved.
    View Solution.

    IE9 has not yet been released in final form, it is still in Beta.  I do not know if HP has any plans to support the Web Printing application on IE9, but if they do I would not expect them to release anything before the official IE9 release.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • After the update the home sharing doesn't work anymore

    Last night I had an update from my Apple TV. After I updated it, the home sharing doesn't work anymore on any device. Not on my iPhone, iTunes, iPad, nothing. I double checked every setting and this isn't the problem. I have the newest version of iTunes. Please help!

    Hello Roossx2,
    Thanks for using Apple Support Communities.
    For more information, take a look at:
    Troubleshooting Home Sharing
    http://support.apple.com/kb/TS2972
    Have a nice day,
    Mario

  • My web browsers doesn't work anymore because i accidentally deleted the certificates. help me how to retrieve it .. thanks apple :)

    my web browsers doesn't work anymore because i accidentally deleted the certificates. help me how to retrieve it .. thanks apple

    Apple - Support - iPod - Repair pricing - http://www.apple.com/support/ipod/service/prices/

  • Home Sharing doesn't work on my iMac (2013)

    Hi,
    I have an iMac 2013, all my music and movies are on it.
    Home Sharing is enabled.
    I have the iMac, an iPhone, an iPad and an Apple TV all on the same network, sponsored by a Time Capsule.
    None of the 3 devices can connect to the iMac library. The Apple TV doesn't see it. When I add the library in the Remote app of the iPhone and iPad, I have to enter the code in iTunes but then after the app is "looking for the library" without finding it.
    The main reason was for me to load my movies from the Apple TV in my living room, but it doesn't work as it can see the Home Sharing. I can though AirPlay the iMac on the Apple TV (so definitely on the same network).
    Any idea? I've done the whole bunch of crap from Apple, nothing works. Rebooted like 20 times each.

    I brought my macbook air at home, everything worked perfectly: iPhone, iPad and Apple TV can connect. So basically I guessed that the issue was coming from the iMac, something preventing it to be discovered. I've checked the bonjour broadcasting and oh, surprise, the iMac wasn't broadcasting... Weird because it's a setup from a Time Machine, the environment I am running currently on the macbook air.
    Anyway, if this can help someone else:
    I've ran:
    ps aux | grep mDNS
    and saw that for the iMac the daemon was launched with the argument -NoMulticastAdvertisements.
    I've setup the daemon to run back as normal and restarted the computer:
    sudo defaults write /System/Library/LaunchDaemons/com.apple.mDNSResponder ProgramArguments -array /usr/sbin/mDNSResponder -launchd
    After the reboot, everything works flawlessly (it has never worked before for the 6 months I had the Apple TV).
    Also interesting discovery and I think it's new because I don't remember being able to do that before, but some of my devices are on the separate 5Ghz network, some are on the 2.4Ghz and they can still all communicate flawlessly. I can use AirPlay on the Export Express that is on the 2.4 from the iMac that is on the 5Ghz, and I can access the iMac library from whatever band. Pretty nice!

  • [SOLVED] network randomly doesn't work after reboot (e100)

    Hi
    Lately I have some weird issues with network. I shutdown computer during night, so basicly I reboot it at least once per day and every now and then without any pattern network doesn't work at all and so far only solution I have found is to reboot (again).
    Before anything else I'm sure it's not hardware problem, since other OS on same computer don't have any issues, neither is router since other devices in network from laptops to mobile phones work flawless.
    Relevant info and what I have found so far (not everything is copy/pasted so there may be some typos):
    $less rc.conf (network part)
    eth1="eth1 192.168.1.242 netmask 255.255.255.0 broadcast 192.168.1.255
    INTERFACES=(eth1)
    gateway="default gw 192.168.1.1"
    ROUTES=(gateway)
    $ifconfig
    eth1 Link encap:Ethernet HWaddr 00:D0:B7:5A:7A:A9
    inet addr:192.168.1.242 Bcast:192.168.1.255 Mask:255.255.255.0
    UP BROADCAST MULTICAST MTU:1500 Metric:1
    RX packets:0 errors:0 dropped:0 overruns:0 frame:0
    TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
    lo Link encap:Local Loopback
    inet addr:127.0.0.1 Mask:255.0.0.0
    inet6 addr: ::1/128 Scope:Host
    UP LOOPBACK RUNNING MTU:16436 Metric:1
    RX packets:380 errors:0 dropped:0 overruns:0 frame:0
    TX packets:380 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:0
    RX bytes:36154 (35.3 Kb) TX bytes:36154 (35.3 Kb)
    $route
    Kernel IP routing table
    Destination Gateway Genmask Flags Metric Ref Use Iface
    192.168.1.0 * 255.255.255.0 U 0 0 0 eth1
    default 192.168.1.1 0.0.0.0 UG 0 0 0 eth1
    $ping 192.168.1.1
    PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data
    From 192.168.1.242 icmp_seq=2 Destination Host Unreachable
    So basicly network is dead, can't even ping router, cable connection is detected tho (lights are on). I have tried to restart newtork with /etc/rc.d/network stop/start, nothing. Only clue is dmesg.
    $dmesg
    Linux version 2.6.30-ARCH (root@T-POWA-LX) (gcc version 4.4.1 (GCC) ) #1 SMP PREEMPT Fri Jul 31 07:30:28 CEST 2009
    e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
    e100: Copyright(c) 1999-2006 Intel Corporation
    e100 0000:03:07.0: PCI INT A -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17
    e100 0000:03:07.0: PME# disabled
    e100: eth1: e100_probe: addr 0xfdfff000, irq 17, MAC addr 00:d0:b7:5a:7a:a9
    e100 0000:03:07.0: firmware: requesting e100/d101m_ucode.bin
    ADDRCONF(NETDEV_UP): eth1: link is not ready
    modrope -r e100 and then reloading it doesn't help either, but reboot does (once I had to reboot twice tho).
    Anyone with more clue and ideas then me, it's getting really annoying, it also kill whole KDE plasma-desktop for couple of minutes before plasmoids find out network is really down and I'm not really fan of morning "gamble". I can't pinpoint some hard date/update when this started to happening because like I said it's random but last couple of months should be quite accurate. Thanks in advance.
    EDIT: dmesg when network works:
    tilen@pikmin ~]$ dmesg | grep e100
    pci 0000:03:07.0: Firmware left e100 interrupts enabled; disabling
    e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
    e100: Copyright(c) 1999-2006 Intel Corporation
    e100 0000:03:07.0: PCI INT A -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17
    e100 0000:03:07.0: PME# disabled
    e100: eth0: e100_probe: addr 0xfdfff000, irq 17, MAC addr 00:d0:b7:5a:7a:a9
    Last edited by NoOrdinary (2009-09-05 09:47:20)

    I don't have anything special set at router but I doubt rc.conf play any role. I will try to set it up with dhcp (but I think I have tried that already) if there is any change.
    This morning I had to reboot twice, so new kernel didn't help. Fowler, what network card are you using, also e100 (well or some intel)? I dunno, should this be handed to the kernel team? If it will piss me enough one morning I'll just go and buy a new network card, just wanna be sure that will really solve the problem.
    UPDATE: OK, this is just silly. I remebered I have acctualy onboard LAN so I edited rc.conf and dived into the dust under my desk to move cable and there I found out it was acctual onboard in use all the time Now this dosen't make much sense to me anymore, when I can't get net up all the stuff in dmesg is e100 related. Anyway, I connected network to e100 and rebooted, suprise, same story. Dmesg reported again link was not ready. I edited rc.conf to
    INTERFACES=(eth0 !eth1)
    in case this has anything to do with proper timing at assigning whatever needs to be assigned to network cards at boot so I'm sure just 1 card with all info provided get's kicked in at boot. First reboot after that works, it dosen't prove anything yet but at leat it's some kind of progress in recognising proper cause.
    UPDATE 2: Nah, still happens. Googling for "no link during initialization" show a lot of familiar problems, almost all on nforce motherboards and mine is nforce too. I just don't get it why this mess seperate PCI network card. In any case it's extremely annoying.
    Last edited by NoOrdinary (2009-09-02 11:46:27)

  • Wi-Fi Sharing doesn't work together with mini Display port

    Hello everyone!
    I can tell you fantstic problem. Sorry for my English - i'm from Russia!
    The problem:
    1. Share Wi-Fi via bonjour to other devices such as iPad, iPhone, windows computers, etc. I'm using Mac os X Snow Leopard! Everything is fine!
    2. Just only I plugging hdmi/dvi adapter - INTERNET STOPS TO WORK!!!
    It looks like fantastic. If just I plugging-off remote monitor! Internet works fine! If only turn on! - It doesn't work!
    Can You only believe???
    When you plug remote monitor or plasma TV via mini display port - Wi-Fi sharing is not working!!!
    I try to solwe this problem about 1 year - and found this forum. Nobody on internet ask this question!!!
    How can I solw this problem????
    My assumptions that minidisplay port and bonjour for wi-fi sharing using the same port and mini dispay have more priority!!!
    But it strange - why nobody in internet ask this question!
    Thanks! I'm waiting for you answer!
    P.S: Equipment
    Название модели:          MacBook Pro
      Идентификатор модели:          MacBookPro7,1
      Имя процессора:          Intel Core 2 Duo
      Скорость процессора:          2.4 ГГц
      Количество процессоров:          1
      Общее количество ядер:          2
      Кэш 2-го уровня:          3 МБ
      Память:          6 ГБ
      Частота шины:          1.07 ГГц
      Версия Boot ROM:          MBP71.0039.B0B
      Версия SMC (система):          1.62f6
      Серийный номер (система):          34017YB6ATM
      UUID аппаратного обеспечения:          FB8005A6-CA65-55AE-8695-49DDA4825BD9
      Сенсор внезапного движения:
      Состояние:          Включен
    Snow Leopard !!!

    Yes, I actually checked that it was 7.1.2  Not sure when they released it, but I had been trying to get this to work all last night.
    But I did try something new...I had set restrictions for my son in Settings.  If I turn "off" all restrictions, the app will load properly and bring me to Netflix sign in.
    Do you know what Restiction settings would prevent Netflix from loading?  I naturally want to lock down the iPad so that my son can not surf explicit websites or install, delete, and in-app purchase.  I did add Netflix to approved list though.
    Thanks.

  • Link To Web Gallery doesn't work

    I created a password protected web gallery in Aperture, but when it has completed uploading, the URL to the gallery doesn't work, it never loads in Safari. When I go to My Gallery home page I see the icon for the gallery with the lock as it should be but when I click on it, I get the message " that access for this gallery is restricted and to contact the owner of the gallery" instead of asking me for the password.
    If a gallery is not password protected it shows up just fine. Am I missing something? Why doesn't the url for a password protected gallery work.

    Just as a note, it works fine in Firefox. It seems to be an issue with Safari and .Mac.

  • Views dropdown on list view web part doesn't work

    Thank you very much beforehand for any help with this issue, I really can't figure out what is going on.
    So, I have big list (36125 items and about 25 public views there) and view selector on list view web part just stopped respond there couple of days ago. You click on down arrow and nothing happens... There are no any java script errors in browser console,
    there are no any errors in ULS log. Profiler shows that request even is not sent to server when you click it to get list of views.
    At the same time, this web-part works correctly with other lists on this site. 
    Do you have any ideas?

    Hi,
    I understand that the view drop down doesn’t work for a specific list. Can you browse these publish views by manually change the view name in the URL? There are two view drop downs in the ribbon(one under the List tab and one under the browser tab). Are
    they all not working?
    It is a big list, you need to make sure that there are no more than 5000 items in a single view. Only 8 lookups can be added to a view at the same time. You need to make sure that these thresholds.
    For more information about these thresholds, please refer  to this site:
    Manage lists and libraries with many items:
    http://office.microsoft.com/en-us/sharepoint-foundation-help/manage-lists-and-libraries-with-many-items-HA010377496.aspx
    Thanks,
    Entan Ming
    Entan Ming
    TechNet Community Support

  • ITunes 9.2.1.5 for Windows: Sharing / Home Sharing doesn't work

    I have a windows XP laptop and sometime within the last two months (after upgrading to 9.x??) sharing and home sharing stopped working.
    I have read the troubleshooting post, and everything is configured correctly. It doesn't work at home OR at work (although MAC users at work are having no problems).
    Can anyone confirm that this is a BUG in 9.2? Does anyone have any fixes? As I said, my ports are open. Of note: my iPhone remote app works on my home network with our Mac, but not the PC, indicating that the problem isn't the router. I did delete exceptions for iTunes, Bonjour, and ports 3689 TCP, 5353 UDP (which, curiously, allowed my remote to work with my PC itunes, but the remote does NOT show up in the sidebar.
    I think this is a bug, beyond the software firewall issues.
    Any help anyone can give me will be met with plaudits and wreaths of laurels.
    Thanks

    Let me know if this article works out for you: http://support.apple.com/kb/TS2972
    I haven't used a Windows laptop in a few years, so I don't have a lot to go from. Good Luck!
    Cheers,
    Rachyl

Maybe you are looking for