Web sharing is not starting
Yesterday i reinstalled the os x bundle cause of isyn was not working properly now isync is working fine but web sharing is not starting. i checked on web sharing from system preferences when i closed the window and comeback again to sharing i see web sharing everytime unchecked i did also locked but still unchecked. if i go to localhost/mysite its say: "Safari can’t open the page “http://localhost/” because it could not connect to the server “localhost”. please tell what i am doing wrong.
Thanks web sharing is working but if i type http://localhost/gmm/index.html it says"Not Found"
The requested URL /gmm/index.html was not found on this server.
but if i type http://localhost/index.html it shows apache page and says "This page is here because the site administrator has changed the configuration of this web server. Please contact the person responsible for maintaining this server with questions. The Apache Software Foundation, which wrote the web server software this site administrator is using, has nothing to do with maintaining this site and cannot help resolve configuration issues." but i can't see this page in the Sites folder. I didn't change any thing, don't know what to do.
Similar Messages
-
Web sharing will not start OS X Lion
Hi there,
I am new to all this so I have probably made some simple errors and I hope someone can help me. I will retell what I have done as I haven't a clue what part of what I have done has mucked things up.
I am really stuck. Web sharing will not start on my iMac running Lion OS X. It did work fine and then I wanted to activate PHP so my test website contact form would work (and send the data on the form throught to my email address.
Before I did anything I turned on websharing and could view my website from another computer using: http://192.168.1.4/~stewartfergusson/
I think followed the instructions on this link to activate PHP - http://foundationphp.com/tutorials/php_leopard.php
I then did a few things in terminal and will paste below what I did:
Password:
Stewart-Fergussons-iMac:etc stewartfergusson$
Last login: Wed Jan 4 09:03:03 on console
Stewart-Fergussons-iMac:etc stewartfergusson$
Last login: Thu Jan 5 06:19:15 on console
Stewart-Fergussons-iMac:etc stewartfergusson$ sudo In -s /usr/lib/libpq.5.3.dylib /usr/lib/libpq.5.dylib
Password:
sudo: In: command not found
Stewart-Fergussons-iMac:etc stewartfergusson$ sudo ln -s /usr/lib/libpq.5.3.dylib /usr/lib/libpq.5.dylib
ln: /usr/lib/libpq.5.dylib: File exists
Stewart-Fergussons-iMac:etc stewartfergusson$ sudo apachectl -t
Password:
Syntax error on line 1 of /private/etc/apache2/httpd.conf:
Invalid command '1', perhaps misspelled or defined by a module not included in the server configuration
Stewart-Fergussons-iMac:etc stewartfergusson$ sudo apachectl configtest
Password:
Syntax error on line 1 of /private/etc/apache2/httpd.conf:
Invalid command '1', perhaps misspelled or defined by a module not included in the server configuration
Stewart-Fergussons-iMac:etc stewartfergusson$
An important point to note is that I now appear to have more than one http.config file and they are located in the following locations:
1) Macintosh HD/etc/apache2/httpd.conf.default
2) Macintosh HD/etc/apache2/httpd.conf.default.default
3) Macintosh HD/etc/apache2/original/httpd.conf
I edited this file (which one I have not got a clue) and also the php.ini file within Macintosh HD/etc/ using Terminal - the command I used was sudo cp php.ini.default php.ini
This php.ini file now exists in two locations now as well:
1) Macintosh HD/etc/php.ini
2) Macintosh HD/etc/php.ini.default
I then edited this file by changing the line of code below from:
514 error_reporting = E_ALL & ~E_NOTICE (I think it said E_DEPRECATED actually) but I am lifting this from the web page in the link above)
To:
514 error_reporting = E_ALL
I then saved this file.
I then deactivated web sharing in System Preferences and since then have not been able to restart Web Sharing. I click it and it flashes orange for a second then does not start.
This was all done to activate PHP on my iMac so I can host my own site which has a PHP contact form page.
Please help I am so out of my depth I am very worried I may have changed things and I am going to forget what I did.
If you need to know anything then please ask.
Thank you so much
sfergusson1
'JollyoldEngland'Just to add I didn't post all the things I did in Terminal - here it is:
Last login: Sun Jan 1 09:01:52 on console
Stewart-Fergussons-iMac:~ stewartfergusson$ cd/private/etc
-bash: cd/private/etc: No such file or directory
Stewart-Fergussons-iMac:~ stewartfergusson$ cd
Stewart-Fergussons-iMac:~ stewartfergusson$ cd prvate
-bash: cd: prvate: No such file or directory
Stewart-Fergussons-iMac:~ stewartfergusson$ cd private
-bash: cd: private: No such file or directory
Stewart-Fergussons-iMac:~ stewartfergusson$ cd /private/etc
Stewart-Fergussons-iMac:etc stewartfergusson$ sudo cp php.ini.default php.ini
WARNING: Improper use of the sudo command could lead to data loss
or the deletion of important system files. Please double-check your
typing when using sudo. Type "man sudo" for more information.
To proceed, enter your password, or type Ctrl-C to abort.
Password:
Stewart-Fergussons-iMac:etc stewartfergusson$
Last login: Wed Jan 4 09:03:03 on console
Stewart-Fergussons-iMac:etc stewartfergusson$
Last login: Thu Jan 5 06:19:15 on console
Stewart-Fergussons-iMac:etc stewartfergusson$ sudo In -s /usr/lib/libpq.5.3.dylib /usr/lib/libpq.5.dylib
Password:
sudo: In: command not found
Stewart-Fergussons-iMac:etc stewartfergusson$ sudo ln -s /usr/lib/libpq.5.3.dylib /usr/lib/libpq.5.dylib
ln: /usr/lib/libpq.5.dylib: File exists
Stewart-Fergussons-iMac:etc stewartfergusson$ sudo apachectl -t
Password:
Syntax error on line 1 of /private/etc/apache2/httpd.conf:
Invalid command '1', perhaps misspelled or defined by a module not included in the server configuration
Stewart-Fergussons-iMac:etc stewartfergusson$ sudo apachectl configtest
Password:
Syntax error on line 1 of /private/etc/apache2/httpd.conf:
Invalid command '1', perhaps misspelled or defined by a module not included in the server configuration
Stewart-Fergussons-iMac:etc stewartfergusson$ -
Personal web sharing will not start up
my personal web sharing will not start up.
i tried to start it up at work on my laptop and i got a message that said anther computer on the network was using the same name. since then the personal web sharing can be clicked on but, never starts up.
anyone have any ideas how i can fix this? i am trying to learn PHP and i need to have it working so i can sync up with apache.Try changing your computer's name. To do so go to the Sharing preference pane and change the computer's name to something else. Try restarting web sharing after this...
-
Personal web sharing will not start
my personal web sharing will not start up.
i tried to start it up at work on my laptop and i got a message that said anther computer on the network was using the same name. since then the personal web sharing can be clicked on but, never starts up.
anyone have any ideas how i can fix this? i am trying to learn PHP and i need to have it working so i can sync up with apache.my personal web sharing will not start up.
i tried to start it up at work on my laptop and i got
a message that said anther computer on the network
was using the same name. since then the personal web
sharing can be clicked on but, never starts up.
anyone have any ideas how i can fix this? i am trying
to learn PHP and i need to have it working so i can
sync up with apache.
The solution to your problem is most likely contained within your question.
You'll need to locate the machine on your network that has the same name as yours and change its name... or you'll need to rename your computer to something else. -
Web-Sharing does not start up-
Hello,
I have a problem with my Web-Sharing. When I activate "Web-Sharing" in my Sharing-Preferences, the httpd (Apache webserver) doesn't start up (as can be seen in the activity monitor), thus I'm not able to connect to the webserver with Safari. I only have this issue on my iMac (10.5.2), it works perfectly on the PowerBook (10.5.2).
Does anyone have a solution without reinstalling Leopard?
Thanks a lot.
TillInteresting… The console says:
02.03.08 17:57:55 org.apache.httpd[1390] (2)No such file or directory: httpd: could not open error log file /private/var/log/apache2/error_log.
02.03.08 17:57:55 org.apache.httpd[1390] Unable to open logs
02.03.08 17:57:55 com.apple.launchd[1] (org.apache.httpd[1390]) Exited with exit code: 1
02.03.08 17:57:55 com.apple.launchd[1] (org.apache.httpd) Throttling respawn: Will start in 10 seconds -
Personal web sharing is not starting up
when i start my personal web sharing i get this error
dyld: NSLinkModule() error
dyld: Symbol not found: ap_popenfex
Referenced from: /usr/libexec/httpd/modlogforensic.so
Expected in: flat namespace
/usr/sbin/apachectl: line 175: 10617 Trace/BPT trap $HTTPD
/usr/sbin/apachectl start: httpd could not be started
May 30 14:27:19 JavaJax crashdump[10618]: httpd crashed
May 30 14:27:19 JavaJax crashdump[10618]: crash report written to: /Library/Logs/CrashReporter/httpd.crash.log
i have no idea what any of that means"
total 4664
-rw-r--r-- 1 root wheel 8304 Jun 27 2001 httpd.exp
-rwxr-xr-x 1 root wheel 113376 Jun 27 2001 libdav.so
-rwxr-xr-x 1 root wheel 223700 Jun 27 2001 libperl.so
-r-xr-xr-x 1 root wheel 1184376 Jun 27 2001 libphp4.so
-rwxr-xr-x 1 root wheel 71640 Jun 27 2001 libproxy.so
-rwxr-xr-x 1 root wheel 145880 Jun 27 2001 libssl.so
-rwxr-xr-x 1 root wheel 13512 Jun 27 2001 mod_access.so
-rwxr-xr-x 1 root wheel 9472 Jun 27 2001 mod_actions.so
-rwxr-xr-x 1 root wheel 13928 Jun 27 2001 mod_alias.so
-rwxr-xr-x 1 root wheel 8956 Jun 27 2001 mod_asis.so
-rwxr-xr-x 1 root wheel 13872 Jun 27 2001 mod_auth.so
-rwxr-xr-x 1 root wheel 9340 Jun 27 2001 modauthanon.so
-rwxr-xr-x 1 root wheel 9544 Jun 27 2001 modauthdbm.so
-rwxr-xr-x 1 root wheel 28960 Jun 27 2001 mod_autoindex.so
-rwxr-xr-x 1 root wheel 33128 Jan 30 2006 mod_bonjour.so
-rwxr-xr-x 1 root wheel 9644 Jun 27 2001 modcernmeta.so
-rwxr-xr-x 1 root wheel 15048 Jun 27 2001 mod_cgi.so
-rwxr-xr-x 1 root wheel 13816 Jun 27 2001 mod_digest.so
-rwxr-xr-x 1 root wheel 9228 Jun 27 2001 mod_dir.so
-rwxr-xr-x 1 root wheel 9236 Jun 27 2001 mod_env.so
-rwxr-xr-x 1 root wheel 13664 Jun 27 2001 mod_expires.so
-rwxr-xr-x 1 root wheel 9180 Jun 27 2001 mod_headers.so
-rwxr-xr-x 1 root wheel 9100 Jun 28 2001 modhfsapple.so
-rwxr-xr-x 1 root wheel 18440 Jun 27 2001 mod_imap.so
-rwxr-xr-x 1 root wheel 32904 Jun 27 2001 mod_include.so
-rwxr-xr-x 1 root wheel 18988 Jun 27 2001 mod_info.so
-rwxr-xr-x 1 root wheel 20020 Jun 27 2001 modlogconfig.so
-rwxr-xr-x 1 root wheel 13968 Jan 30 2006 modlogforensic.so
-rwxr-xr-x 1 root wheel 14576 Jun 27 2001 mod_mime.so
-rwxr-xr-x 1 root wheel 23804 Jun 27 2001 modmimemagic.so
-rwxr-xr-x 1 root wheel 28392 Jun 27 2001 mod_negotiation.so
-rwxr-xr-x 1 root wheel 51936 Jun 27 2001 mod_rewrite.so
-rwxr-xr-x 1 root wheel 13784 Jun 27 2001 mod_setenvif.so
-rwxr-xr-x 1 root wheel 14052 Jun 27 2001 mod_speling.so
-rwxr-xr-x 1 root wheel 22428 Jun 27 2001 mod_status.so
-rwxr-xr-x 1 root wheel 9272 Jun 27 2001 moduniqueid.so
-rwxr-xr-x 1 root wheel 9188 Jun 27 2001 mod_userdir.so
-rwxr-xr-x 1 root wheel 9652 Jun 27 2001 mod_usertrack.so
-rwxr-xr-x 1 root wheel 13576 Jun 27 2001 modvhostalias.so
" -
Turning on Web Sharing does not work and fails to load apache web server
Sort of answering my own question here but hope it will be useful to other people and save them some time.
After receiving my shiny new imac with os x lion pre-installed, I was a little dismayed and confused when I went to System Preferences -> Internet and Wireless -> Sharing and attempted to check the Web Sharing. Every time I clicked this option I was told Web Sharing was starting but would then repeatedly fail and apache failed to start.
Looking in the Console I find:
org.apache.httpd: dyld: Library not loaded: /usr/lib/libpq.5.dylib
org.apache.httpd: Referenced from: /usr/sbin/httpd
org.apache.httpd: Reason: image not found
Entering in the console:
vim /Library/Logs/DiagnosticReports/httpd_2011-08-06-165030_localhost.crash (date and time bit will vary)
reveals:
Process: httpd [2418]
Path: /usr/sbin/httpd
Identifier: httpd
Version: ??? (???)
Code Type: X86-64 (Native)
Parent Process: launchd [1]
Date/Time: 2011-08-06 16:50:30.106 +0100
OS Version: Mac OS X 10.7 (11A511a)
Report Version: 9
Crashed Thread: 0
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information:
dyld: launch, loading dependent libraries
Dyld Error Message:
Library not loaded: /usr/lib/libpq.5.dylib
Referenced from: /usr/sbin/httpd
Reason: image not found
Binary Images:
0x1022f6000 - 0x102352fef httpd (??? - ???) <9D63FBFD-DD87-3DD5-AD1A-D8A79FEC3EE8> /usr/sbin/httpd
"/Library/Logs/DiagnosticReports/httpd_2011-08-06-165030_localhost.crash" 32L, 1469C
TO FIX THIS ISSUE:
It appears /usr/lib/libpq.5.dylib does not exist but /usr/lib/libpq.5.3.dylib does.
Fix by creating a symbolic link from /usr/lib/libpq.5.3.dylib to /usr/lib/libpq.5.dylib
=
sudo ln -s /usr/lib/libpq.5.3.dylib /usr/lib/libpq.5.dylib
Going back to System Preferences -> Internet and Wireless -> Sharing clicking Web Sharing a couple of times turns Web Sharing on successfully!
Going to http://localhost/ displays the "It Works!" page.
HTH people as it took me a while to find the correct solution online from:
http://www.azattis.com/2011/07/os-x-lion-postgresql-84-install-problem.htmlHi there,
You seemed to have had a similar problem to what I now have and so wondered if you might be able to help me :-)
I have posted this as a new post as well but if anyone has five mins could they take a look - I would be very grateful. Here you go:
I am new to all this so I have probably made some simple errors and I hope someone can help me. I will retell what I have done as I haven't a clue what part of what I have done has mucked things up.
I am really stuck. Web sharing will not start on my iMac running Lion OS X. It did work fine and then I wanted to activate PHP so my test website contact form would work (and send the data on the form throught to my email address.
Before I did anything I turned on websharing and could view my website from another computer using: http://192.168.1.4/~stewartfergusson/
I think followed the instructions on this link to activate PHP -http://foundationphp.com/tutorials/php_leopard.php
I then did a few things in terminal and will paste below what I did:
Last login: Sun Jan 1 09:01:52 on console
Stewart-Fergussons-iMac:~ stewartfergusson$ cd/private/etc
-bash: cd/private/etc: No such file or directory
Stewart-Fergussons-iMac:~ stewartfergusson$ cd
Stewart-Fergussons-iMac:~ stewartfergusson$ cd prvate
-bash: cd: prvate: No such file or directory
Stewart-Fergussons-iMac:~ stewartfergusson$ cd private
-bash: cd: private: No such file or directory
Stewart-Fergussons-iMac:~ stewartfergusson$ cd /private/etc
Stewart-Fergussons-iMac:etc stewartfergusson$ sudo cp php.ini.default php.ini
WARNING: Improper use of the sudo command could lead to data loss
or the deletion of important system files. Please double-check your
typing when using sudo. Type "man sudo" for more information.
To proceed, enter your password, or type Ctrl-C to abort.
Password:
Stewart-Fergussons-iMac:etc stewartfergusson$
Last login: Wed Jan 4 09:03:03 on console
Stewart-Fergussons-iMac:etc stewartfergusson$
Last login: Thu Jan 5 06:19:15 on console
Stewart-Fergussons-iMac:etc stewartfergusson$ sudo In -s /usr/lib/libpq.5.3.dylib /usr/lib/libpq.5.dylib
Password:
sudo: In: command not found
Stewart-Fergussons-iMac:etc stewartfergusson$ sudo ln -s /usr/lib/libpq.5.3.dylib /usr/lib/libpq.5.dylib
ln: /usr/lib/libpq.5.dylib: File exists
Stewart-Fergussons-iMac:etc stewartfergusson$ sudo apachectl -t
Password:
Syntax error on line 1 of /private/etc/apache2/httpd.conf:
Invalid command '1', perhaps misspelled or defined by a module not included in the server configuration
Stewart-Fergussons-iMac:etc stewartfergusson$ sudo apachectl configtest
Password:
Syntax error on line 1 of /private/etc/apache2/httpd.conf:
Invalid command '1', perhaps misspelled or defined by a module not included in the server configuration
Stewart-Fergussons-iMac:etc stewartfergusson$
An important point to note is that I now appear to have more than one http.config file and they are located in the following locations:
1) Macintosh HD/etc/apache2/httpd.conf.default
2) Macintosh HD/etc/apache2/httpd.conf.default.default
3) Macintosh HD/etc/apache2/original/httpd.conf
I edited this file (which one I have not got a clue) and also the php.ini file within Macintosh HD/etc/ using Terminal - the command I used was sudo cp php.ini.default php.ini
This php.ini file now exists in two locations now as well:
1) Macintosh HD/etc/php.ini
2) Macintosh HD/etc/php.ini.default
I then edited this file by changing the line of code below from:
514 error_reporting = E_ALL & ~E_NOTICE (I think it said E_DEPRECATED actually) but I am lifting this from the web page in the link above)
To:
514 error_reporting = E_ALL
I then saved this file.
I then deactivated web sharing in System Preferences and since then have not been able to restart Web Sharing. I click it and it flashes orange for a second then does not start.
This was all done to activate PHP on my iMac so I can host my own site which has a PHP contact form page.
Please help I am so out of my depth I am very worried I may have changed things and I am going to forget what I did.
If you need to know anything then please ask.
Thank you so much
sfergusson1
'JollyoldEngland' -
Web sharing/Apache not working
My web sharing doesn't seem to be working.
When I have it enabled in the Sharing panel of the System Preferences, I try to click on the link
My Computer's Website
http://myIPaddress
I get an error message, in both Safari and Firefox, saying that I cannot make a connection to the server. This is similar to other threads in this section except for the following:
- I do have a /var/log/apache2 directory
- I did a chmod 755 on the directory
- the directory is empty
- http://localhost does not work
when I look through a list of my tasks (on the Activity Monitor), I don't see anything related to apache so I'm wondering if my Web Sharing has not initiated the apache server.
I'm running 10.5.6 on a PowerBook G4.
Thanks in AdvanceYou shouldn't see any apache items in Activity Monitor. I've got web sharing on, and I see a bunch of httpd processes in Activity Monitor. Try repairing permissions on your hard drive. Also, look for some config files located in /etc/apache2/. I see the following files/folders in there on my machine:
drwxr-xr-x 13 root wheel 442 Nov 24 2007 extra
-rw-r--r-- 1 root wheel 17684 Jan 27 07:21 httpd.conf
-rw-r--r-- 1 root wheel 12958 Nov 24 2007 magic
-rw-r--r-- 1 root wheel 28782 Nov 24 2007 mime.types
drwxr-xr-x 4 root wheel 136 Aug 13 2008 original
drwxr-xr-x 4 root wheel 136 Nov 24 2007 other
drwxr-xr-x 3 root wheel 102 Aug 13 2008 users -
I tried installing ColdFusion 9 and linking apache to the install. Because the Apache binary was 64bit I had to convert it to 32bit to for the ColdFusion install to work. I backed up the 64bit version and made the new 32bit version my httpd file.
After installing coldfusion finished I went to update some sites in Server Admin. When I tried to save changes in sites (removing a site) the list of sites went blank, clicked on settings, then back to sites, and the changes were not saved.
I restarted the entire server. When I came back to Server Admin and tried to "Start Web" i received the following error:
Try to refresh the view (waterengine.local/Web). (Could not start web service - details in error log.) 100002
I've already replaced the httpd file back to the original 64bit version and will now uninstall coldfusion. Is there a way to reinstall the web services? Seems like the most likely resolution.Had to reinstall the server OS because I couldn't find anywhere to do a reinstall of only the Web Service/Apache. I've downloaded the ColdFusion 9 64bit version. hopefully this works or I'll reinstall the OS one more time and give up on running ColdFusion 9 on this system until I can find someone who has done a successful install. This time I'll backup so I don't have to do a 45 minute remote re-install, although I thought that was pretty fast over wifi.
-
Web calendar interfase not started when starting http server
Hi, I installed CS succesfully, the calendar server is working fine.
My problem is that the web interfase is not started when starting the HTTP server.
I checked the log files of the http server and I saw this:
[Thu Jan 9 19:13:50 2003] [warn] [client 144.23.48.238] FastCGI request processing timed out
[Thu Jan 9 19:15:19 2003] [notice] SIGHUP received. Attempting to restart
[Thu Jan 9 19:15:23 2003] [error] (2)No such file or directory: FastCGI: access for server (uid -1, gid 501) failed: read not allowed by group
[Thu Jan 9 19:15:23 2003] [notice] FastCGI: process manager initialized (pid 6897)
[Thu Jan 9 19:15:23 2003] [warn] FastCGI: server "/u01/oracle/product/CS9.0.3/CSMT/Apache/Apache/fcgi-bin/owc/lexacal.fcgi" started (pid 6898)
[Thu Jan 9 19:15:23 2003] [warn] FastCGI: server "/u01/oracle/product/CS9.0.3/CSMT/Apache/Apache/fcgi-bin/echo" started (pid 6899)
[Thu Jan 9 19:15:24 2003] [notice] Oracle HTTP Server/1.3.22 (Unix) mod_plsql/9.0.2.0.0 DAV/1.0.2 (OraDAV enabled) mod_osso/9.0.2.0.0 mod_oc4j/3.0 mod_ossl/9.0.2.0.0 mod_fastcgi/2.2.12 mod_perl/1.26 configured -- resuming normal operations
[Thu Jan 9 19:15:24 2003] [notice] Accept mutex: fcntl (Default: fcntl)
[Thu Jan 9 19:15:34 2003] [warn] FastCGI: s[i]Long postings are being truncated to ~1 kB at this time.Hi Gonzalo,
You will have to report this problem to the Oracle Support organization.
They will most probably want to see your web configuration file, the httpd.conf, as well as the appropriate logs.
thanks,
Jean-Marc Robillard
Product Management -
Sun One Web Server instance not starting
I have installed Sun One Web server 6.1. The administrator server is starting up. However, the instance of the web server through which I want to serve the web pages is not starting. Altough, there are no error messages that are shown when I am starting the server. Please help.
I would check the logs directory for a PID file. It could be that there is a bogus pid file and when it tries to start you will get no error message. If there is a PID file delete it and try again.
-
Web Sharing Won't Start Up.
I was using My Powerbook successfully to develop websites using php and apache but suddenly when I upgraded to 10.4.6 web sharing in the system preferences just hangs when it is selected.
I get a message saying it is starting up but it never gets as far as starting up.
Consequently I can't use php - all I get on php page load containing dynamic data is a white screen.
To further mess things up before I found out what the probelm was I tried to fix PHP by loading up PHP 5 (from entropy). I'm not sure that will have donw too much harm as it seems to have just loaded in a different location and the terminal confirms that PHP 4.4.1 is the version that is running.
Can anyone help me figure out how to fix this mess. I'm not good in the terminal but I'm willing to give anything a go at the moment.
Cheers
DaveOpen Console and then choose Show Log List from the View menu. Navigate to /var/log and then press the right arrow. Choose httpd and then error_log.
PowerMac G5 1.8 Mac OS X (10.4.5) MacMini (MacOS 10.4.5 Server), 2nd internal HD, LaCie FW 500GB, QPS FW 80MB -
Services of shared services not starting
Hi All,
Please help .
I am using hyperion 11.1.1.3, When I am starting the services of shared service from services.msc,it's starting but again stopping in few seconds.When I logged on to event.vwr it's saying..
The description for Event ID ( 0 ) in Source ( HyS9SharedServices ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: The Java Virtual Machine has exited with a code of -1, the service is being stopped
I am starting the Hyperion services in the following order .Please check if wrong..
-Hyperion ldap
-hyperion shared services
-workspace agent
-workspace web appln.
-fdqm task manager
-fr services
-hfm dme listener
-hfm managent service
-hfm web service managerThanks a lot, John for your reply Please help
Yes ,I am able to start the LDAP services,I even started shared services from START MENU from ORACLE EPM SYSTEM-FOUNDATION SERVICES-START SHARED SERVICES (ORACLE WEBLOIC)it STARTED and FAILED again.
and when I checked for logs in C:\Hyperion\logs\SharedServices9 \sharedservices_Metadata.log it is giving..
2013-01-02 12:17:51,812 [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] ERROR com.hyperion.eie.common.cms.registry.sync.CMSRegistryHelper - Link operation failed for APPLICATION component: HFM1011Q3: Link component does not exist for HFM1011Q3 application
2013-01-02 13:14:48,828 [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] ERROR com.hyperion.eie.common.cms.registry.link.RegistryHFMApplicationLinker - Link component does not exist for DEV1011Q1 application
2013-01-02 13:14:48,828 [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] ERROR com.hyperion.eie.common.cms.registry.sync.CMSRegistryHelper - Link operation failed for APPLICATION component: DEV1011Q1: Link component does not exist for DEV1011Q1 application
when I checked C:\Hyperion\logs\services it is giving log4j:WARN No appenders could be found for logger (stdout).
log4j:WARN Please initialize the log4j system properly.
similarly in eventvwr it is giving...
The description for Event ID ( 0 ) in Source ( HyS9SharedServices ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: The Java Virtual Machine has exited with a code of -1, the service is being stopped.. -
Personal Web Sharing won't start up
I'm sorry if this is duplicated but I when I try to start up my web sharing, it goes grey, says starting but never gets anywhere.
I was tring to install PHP and tried the 5.0 verison as I have the intel mac. I guess that was a big mistake.
When I try to use terminal to launch apache I get the following message.
AllisonServer:~ allisonserver$ apachectl start
Processing config directory: /private/etc/httpd/users/*.conf
Processing config file: /private/etc/httpd/users/+entropy-php.conf
fopen: No such file or directory
httpd: could not open document config file /private/etc/httpd/users/+entropy-php.conf
/usr/sbin/apachectl start: httpd could not be started
In the console utility, when I go to /var/log and then into httpd the window is empty.
In the console log I'm getting this message
Processing config directory: /private/etc/httpd/users/*.conf
Processing config file: /private/etc/httpd/users/+entropy-php.conf
fopen: No such file or directory
httpd: could not open document config file /private/etc/httpd/users/+entropy-php.conf
/usr/sbin/apachectl start: httpd could not be started
Can anybody help me clear out the PHP5 if that's my problem.
I would also like to know how to tell if i have apache 1.2 or 2.0?
Thank you in advanceGo here and read the PHP Problems part:
http://Gnarlodious.com/Computer/Apache -
Personal Web Sharing doesn't start up
A while ago I shut off the "Personal Web Sharing" tool simply because I did not need it. However at this moment I'm trying to restart it (which I assume is the Apache web service). So I go to System Preferences -> Sharing, and tick the "Personal Web Sharing" box. However, when I do, all I get is the message "Web sharing is starting up..." It stalls there and doesn't go any further.
I haven't made any changes to Apache, but I have attempted to install PHP on my system using the package on http://www.entropy.ch/software/macosx/ -- it failed, giving me a generic error message.
Is there a solution to this problem? Does it have anything to do with the messed-up PHP installation?I am experiencing the same problem: going through the System Preferences (in OSX 10.4.10), to the Sharing pane, then the Services Tab, and clicking Start Personal Web Sharing only gives me "Starting Web Sharing..." and never actually starts it.
I have tried the following solutions:
• replaced httpd.conf files using both the httpd.conf.default file from the machine in error as well as from another Mac (adapting the usernames as appropriate)
• replacing the entire /private/etc/httpd directory with the one from the other Mac, whose Web Server will start up
• when starting it via Terminal, i get "fopen: no such file or directory" so I created it... no dice.
Can anybody give me any more suggestions?
If not, I do have AppleCare on it - think they might help?
Maybe you are looking for
-
Safari 5.1.2 won't open in lion and mail opens but can't get email
I turned on my computer the otherday and I couldn't get safari to open. When I click on it it just bounces in the dock for hours. I tryed to do a software update, which included updating safari, but my computer got stuck in the installing screen and
-
Will boot image on external drive work for powerbook g4
I've recently upgraded to a Powerbook G4 17-inch computer. Prior to that I had a Mac mini with tiger running on it. I used Carbon Copy Cloner to backup the mac mini to an external HD via firewire. Is it possible for me to boot my powerbook g4 from th
-
Hello everybody. First i'm french and my english is so bad, excuse me for my language ! Ok i've got a iMac 27" buy in the end of 2009, with ATI Radeon HD 4850. I'm photographer and i use this mac for Lightroom and Photoshop first. I never have any pr
-
How to append binary data to existing file in OSB
Hi, I have an OSB project that I need for it to append binary data via ftp. Here's my current flow: MFL binary output --> Replace $body with mfl binary output --> Publish to action (Business service that's configured to ftp binary data). However, wh
-
Where is tunisia map in nokia ovi suite?!
hi,i don't find tunisia between maps in nokia ovi suite?! where the bugs,please heeelp for downloadmap of my country Solved! Go to Solution. Attachments: tunisia not found.JPG 69 KB