WEB TEMPLATE DOES NOT EXIST IN Q

Hello
First we created 15 reports in D and transported those reports to Q. Everything worked fine.
Then we created 3 new reports in D. The wemtemplate assigned to those reports is a new webtemplate created saving an already existing webtemplate (an which is already transported to Q) with a new name.
The 3 new reports work in D. But once transported to Q, they don't work there:
The initial exception that caused the request to fail was:
The Web template "Z..." does not exist in the master system
Please, does anybody know the solution for this issue?
Thanks in advance!
Jon

Can you open the new web template in the Q system using the web application designer? It seems, looking at the error message, that it is not transported.

Similar Messages

The Web template does not exist in the master system

We are using a Web Template (ZPORTAL) as an access point to other web templates and to 0ANALYZER. We recieve an abort when the use logs on for the first time and is presented with the password change window. When they change the password and click ok, the following message is recieved: The Web template "ZPORTAL=" does not exist in the master system. After the abort, they go back to the ZPORTAL again in which case no abort occurs and they are able to navigate the web template. This only happens when they have to change their password. Has anyone else seen this?

Make sure the template exists in the system which is configured in the iView property.
There should be a one to one mapping between BI and EP systems.
You cannot connect 2 BI system to one EP system and configure BI JAVA

Error: web template does not exist in master system

I have Bex 7x query. I wnat to publish it on SAP enterprise portal (EP 7.0 SP19).
When I create a Bex iview and provide link of query, I get following error in preview:
The webtemplate <queryname> does not exist in master system.
Could you please let me know what can be the root cause of this error?
Regards,
Deepti

Dear Deepti,
Can you please make sure that Web template "0ANALYSIS_PATTERN" is acive in your system. If not, please activate it from
Business content.
You can check this by following below steps:
Please run TX SE38 and Execute Report RS_TEMPLATE_MAINTAIN_70 and enter the template name and execute.
If you could see the HTML code , this means it is activated.
Could you also please confirm me the settings you have in TX RSCUSTV27.
Regards,
Arvind

Support, please add a place for the Z30 and fix the "The specified template does not exist or is empty" error on this page

Please get the web site designers to fix this forum. There is no Z30 "place" and there is an error message that shows up every time.
The specified template does not exist or is empty

Make sure the SharePoint Server is joined to Active Directory. Also validate that the Web Application Application Pool account is running as a Domain User (rather than say Network Service).
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Template interpretation failed. Template does not exist.

Hi Gurus,
We are configuring SRM 7.0 ( SPS06) with ECC6 ( Ehp4) without Portal, but when I go to Webbrowser ( SiCF..BBPSTART service) and click on any function like Shop...the gives error 'Template interpretation failed. Template does not exist. " ....after going throug some threads we added ~GENERATEDYNPRO' with value '1'u2026.in Service BBPSC02..etc...then system shows SAP GUI screen in the web Browser for Shop function for example...
Since in the Config Guide. for SRM 7.0..To configure the portal-independent navigation frame...we need to define below steps..
1. RFC connection of type H (HTTP) to the SAP ERP back-end system under SM59
2.Enter the HTTP connection defined above, but without the suffix, in the Customizing activity Define System Landscape in the System Alias for POWL Navigation field. Enter, for example, SAP_ERP.
3.Activate the Internet Communication Framework (ICF) service /sap/bc/nwbc/srm in transaction HTTP Service Hierarchy Maintenance (SICF). Use this service to start NetWeaver Business Client (NWBC) for HTML.......which is not defined yet....
Can anyone please confirm me..whether I'm right or anything need to be corrected ...
Thank you in advance.
Regards
Naren

Thanks.
Now I am able to see SRM web browser Screen w/O Portal ...its really nice compare to SRM5.0
As per Config guide It happned after doing below steps .....
SAP Supplier Relationship Management (SAP SRM) supports various flexible deployment variants.
Note
You can use the flexible deployment variants in SAP Supplier Relationship Management 7.0 (SAP
SRM 7.0) on SAP enhancement package 1 for SAP NetWeaver 7.0 SPS06.
3.1 Portal-Independent Navigation Frame and Inbox
3.1.1 Portal-Independent Navigation Frame Configuration
Using the Portal-independent navigation frame, you can use SAP Supplier Relationship Management
(SAP SRM) applications without using SAP NetWeaver Portal.
Procedure
To configure the portal-independent navigation frame, proceed as follows:
1. In Customizing for SAP Supplier Relationship Management, define the following settings:
n Activate the Portal-independent navigation frame in Customizing for SAP Supplier
Relationship Management under SRM Server Technical Basic Settings Portal-Independent
Navigation Frame Activate/Deactivate Portal-Independent Navigation Frame .
n Define an RFC connection of type H (HTTP) to the SAP ERP back-end system under SRM
Server Technical Basic Settings Define RFC Destinations , or use transaction SM59. The name of
the connection must end with one of the following character sequences:
l For a non-secure connection, use_HTTP.
Example: SAP_ERP_HTTP.
l For a secure connection, use _HTTPS.
Example: SAP_ERP_HTTPS.
n Enter the HTTP connection defined above, but without the suffix, in the Customizing activity
Define System Landscape in the System Alias for POWL Navigation field. Enter, for example, SAP_ERP.
n Activate the Internet Communication Framework (ICF) service /sap/bc/nwbc/srm in
transaction HTTP Service Hierarchy Maintenance (SICF). Use this service to start NetWeaver Business
Client (NWBC) for HTML.
Thnaks

DBCA in silent mode gives "template does not exist" error

We successfully created a database using the DBCA in silent mode like this:
dbca -silent -responseFile dbca.rspThen, attempting to create a second database on the same machine with a slightly different response file, we get the following error:
dbca -silent -responseFile dbca.rsp2
Template General Purpose does not exist. Please specify an existing template for database creation.The "General Purpose" template was used in the original database creation. It does exist. No logfile is created. Any ideas what could be causing this?

We never did get to the bottom of the mysterious "template does not exist" error, but went with a solution that is better:
1. we used the already-existing database to create a clone template:
dbca -silent -createCloneTemplate -sourceDB OLD_SID -sysDBAUserName sys
-sysDBAPassword XXXX -templateName old_sid_copy.dbc
-maintainFileLocations true
-datafileJarLocation /local/opt/oracle/product/10.2.0/assistants/dbca/templates (Note the use of the -maintainFileLocations switch)
2. edited the template file, replacing all instances of OLD_SID with NEW_SID
/local/opt/oracle/product/10.2.0/assistants/dbca/templates/old_sid_copy.dbc
3. create the clone using the new template
dbca -silent -createDatabase -templateName old_sid_copy.dbc
-gdbname NEW_SID.MYHOST.COM -sid NEW_SID
-datafileJarLocation /local/opt/oracle/product/10.2.0/assistants/dbca/templates
-responseFile NO_VALUE -characterset WE8ISO8859P1

The file /_controltemplates/15/ does not exist

Hi Everyone.
We are planning to migrate from share point 2010 to SharePoint 2013.So we have created one POC environment to test the customizations(master pages,Page layouts,web parts,site definition,Site templates) in SharePoint 2013.We have installed Visual Studio 2012
to convert VS2010 solution.We have done with the converstion from VS2010 solutions to VS2012.
We have followed all the below steps to test the same functionality.
1.Install Visual Studio 2012 and reopen solution in VS 2012
2.Change .NET Framework version to v4.5
3.Update existing reference of Microsoft.SharePoint.dll to "C:\Program Files\Common Files\microsoft shared\Web Server Extensions\15\ISAPI". (may need to other dlls reference as well)
4.Add a property ‘SharePointVersion =”15.0"’ in <Solution> element in the manifest file. (otherwise it gets installed into SharePoint 14 location)
5.Update "_layouts" folder with "_layouts/15" reference.
6.Update "CONTROLTEMPLATES" with "CONTROLTEMPLATES/15"
6.Build your solution, deploy and Test.
After successful deployment we are not able to add the web part to the page.We are getting an error like the following.
The file '/_controltemplates/15/{Project folder}/{web part Folder}/{Web PartUserControl}' does not exist.
Any one can help me on this issue.
Thanks in advance
Regards,
Anil

Hi Everyone.
We are planning to migrate from share point 2010 to SharePoint 2013.So we have created one POC environment to test the customizations(master pages,Page layouts,web parts,site definition,Site templates) in SharePoint 2013.We have installed Visual Studio 2012
to convert VS2010 solution.We have done with the converstion from VS2010 solutions to VS2012.
We have followed all the below steps to test the same functionality.
1.Install Visual Studio 2012 and reopen solution in VS 2012
2.Change .NET Framework version to v4.5
3.Update existing reference of Microsoft.SharePoint.dll to "C:\Program Files\Common Files\microsoft shared\Web Server Extensions\15\ISAPI". (may need to other dlls reference as well)
4.Add a property ‘SharePointVersion =”15.0"’ in <Solution> element in the manifest file. (otherwise it gets installed into SharePoint 14 location)
5.Update "_layouts" folder with "_layouts/15" reference.
6.Update "CONTROLTEMPLATES" with "CONTROLTEMPLATES/15"
6.Build your solution, deploy and Test.
After successful deployment we are not able to add the web part to the page.We are getting an error like the following.
The file '/_controltemplates/15/{Project folder}/{web part Folder}/{Web PartUserControl}' does not exist.
Any one can help me on this issue.
Thanks in advance
Regards,
Anil

Error, package does not exist, thrown when calling jsp page

Hi
I have downloaded sample jsp pages for interaction with Crystal reports. When I compile these jsp pages in NetBeans 3.6 there are no problems. When I deploy these pages and associated libraries to Tomcat 5, I get the following error when attempting to call the jsp page, but all the jars used in NetBeans are present in the web-inf/lib directory and I have looked in the jars and found classes in the com.crystaldecisions.report.web.viewer package. I have been unable to find any information after googling and looking at the jakarta bug database. What am I doing wrong?
The error...
2004-09-22 17:40:30 StandardWrapperValve[jsp]: Servlet.service() for servlet jsp threw exception
org.apache.jasper.JasperException: Unable to compile class for JSP
An error occurred at line: 1 in the jsp file: /CrystalReportsInteractiveViewer.jsp
Generated servlet error:
[javac] Compiling 1 source file
E:\Tomcat5\work\Catalina\localhost\crystal\org\apache\jsp\SimplePreviewReport_jsp.java:9: package com.crystaldecisions.report.web.viewer does not exist
import com.crystaldecisions.report.web.viewer.*;
^
E:\Tomcat5\work\Catalina\localhost\crystal\org\apache\jsp\SimplePreviewReport_jsp.java:180: cannot resolve symbol
symbol : class CrystalReportInteractiveViewer
location: class org.apache.jsp.SimplePreviewReport_jsp
CrystalReportInteractiveViewer viewer = new CrystalReportInteractiveViewer();
^
An error occurred at line: 1 in the jsp file: /CrystalReportsInteractiveViewer.jsp
Generated servlet error:
E:\Tomcat5\work\Catalina\localhost\crystal\org\apache\jsp\SimplePreviewReport_jsp.java:180: cannot resolve symbol
symbol : class CrystalReportInteractiveViewer
location: class org.apache.jsp.SimplePreviewReport_jsp
CrystalReportInteractiveViewer viewer = new CrystalReportInteractiveViewer();
^
An error occurred at line: 1 in the jsp file: /CrystalReportsInteractiveViewer.jsp
Generated servlet error:
Note: E:\Tomcat5\work\Catalina\localhost\crystal\org\apache\jsp\SimplePreviewReport_jsp.java uses or overrides a deprecated API.
Note: Recompile with -deprecation for details.
3 errors
     at org.apache.jasper.compiler.DefaultErrorHandler.javacError(DefaultErrorHandler.java:127)
     at org.apache.jasper.compiler.ErrorDispatcher.javacError(ErrorDispatcher.java:351)
     at org.apache.jasper.compiler.Compiler.generateClass(Compiler.java:415)
     at org.apache.jasper.compiler.Compiler.compile(Compiler.java:458)
     at org.apache.jasper.compiler.Compiler.compile(Compiler.java:439)
     at org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:552)
     at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:291)
     at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:301)
     at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:248)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:284)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:204)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:256)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:151)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:564)
     at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:245)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:199)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:151)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:564)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:195)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:151)
     at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:164)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:149)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:564)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:156)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:151)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:564)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:972)
     at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:211)
     at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:805)
     at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:696)
     at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:605)
     at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:677)
     at java.lang.Thread.run(Thread.java:534)
The offending page is ....
<%
/*==========================================================================
INSTANTIATE THE VIEWER AND DISPLAY THE REPORT THROUGH THE INTERACTIVE VIEWER
============================================================================
    - Create a Viewer object
    - Set the source for the viewer to the client documents report source
    - Process the http request to view the report
    - Dispose of the viewer object
// Create an Interactive Viewer
CrystalReportInteractiveViewer viewer = new CrystalReportInteractiveViewer();
// Set the name for the interactive viewer
viewer.setName("Crystal_Report_Interactive_Viewer");
// Set the source for the interacive viewer to the client documents report source
viewer.setReportSource(clientDoc.getReportSource());
// Process the http request to view the report
viewer.processHttpRequest(request, response, getServletConfig().getServletContext(), out);
// Dispose of the viewer object
viewer.dispose();
%>included in...
<%@ page import="com.crystaldecisions.sdk.occa.report.application.*"%>
<%@ page import="com.crystaldecisions.sdk.occa.report.data.*"%>
<%@ page import="com.crystaldecisions.sdk.occa.report.lib.*"%>
<%@ page import="com.crystaldecisions.report.web.viewer.*"%>
<html>
<head>
<title>Begin Here - Simple Preview Report</title>
</head>
<body>
<%
/*=================================================================
WORKING WITH THE REPORT APPLICATION SERVER AND JSP TO VIEW REPORTS
===================================================================
Authors Name: Ken Andony
Technology supported by the app: Report Application Server
ALWAYS REQUIRED STEPS
   - Create a new Report Application Session
   - Create a Report Application Server (RAS) Service
   - Set the RAS Server to be used for the service
   - Initialize the RAS Service
   - Create the report client document object
   - Set the RAS Server to be used for the report client document
   - Open the report, and set the open type to Read Only
INSTANTIATE THE REPORT VIEWER
   - Create a Viewer object
   - Set the source for the viewer to the client documents report source
   - Process the http request to view the report
   - Dispose of the viewer object
==================================================================*/
* This line creates a string variable called reportname that we will use to pass
* the Crystal Report filename (.rpt file) to the OpenReport method contained in
* the AlwaysRequiredSteps.jsp.
String reportName ="SimplePreviewReport.rpt";
%>
<%
/* ALWAYS REQUIRED STEPS
Include the file AlwaysRequiredSteps.jsp which contains the code
for steps:
   - Create a new Report Application Session
   - Create a Report Application Server (RAS) Service
   - Set the RAS Server to be used for the service
   - Initialize the RAS Service
   - Create the report client document object
   - Set the RAS Server to be used for the report client document
   - Open the report, and set the open type to Read Only */
%>
<%@ include file="AlwaysRequiredSteps.jsp"%>
<%
/* INSTANTIATE THE REPORT VIEWER
There are three Report Viewers:
1. Crystal Reports Interactive Viewer
2. Crystal Reports Viewer
3. Crystal Reports Parts Viewer
The choices are CrystalReportsInteractiveViewer.jsp, CrystalReportsViewer.jsp,
CrystalReportsPartsViewer.jsp
Note that to use this include you must have the appropriate .jsp file in the
same virtual directory as the main jsp page.
=============================================================================
    DISPLAY THE REPORT
    - display the report using one of the Thin Client DHTML viewers
   Include one of the DHTML Viewers.
    - Crystal Reports Interactive Viewer          =   CrystalReportsInteractiveViewer.jsp
    - Crystal Reports Viewer                                        =   CrystalReportsViewer.jsp
    - Crystal Reports Parts Viewer                         =   CrystalReportsPartsViewer.jsp
    Note** - To use the report parts viewer successfully you are required to
    choose and name three objects in the report to Node0, Node1 and Node2.
    You can access an objects name by using the Format Editor dialog box.
    For more information on the Format Editor Dialog Box and setting objects
    names, please refer to the Help Contents (Help Menu->Crystal Reports Help)
    or by pressing F1
=============================================================================*/
%>
<%@ include file="CrystalReportsInteractiveViewer.jsp" %>
</body>
</html>

Thanks Tien-Chih Wang. It worked...well I'm getting a new set of errors, but progress has been made!
I understand that if placed in the common directory the jar will be available to all webapps but why does it make a difference whether a jar file is placed under the $TOMAT_HOME/common/lib or $TOMAT_HOME/webapps/appname/web-inf/lib directory if I only need to access the jar from one webapp?

Web template "0ADHOC" does not exist in the master system error

Hi to all,
The Web template "0ADHOC" does not exist in the master system.
Error coming while executing query on web template.
Via TCODE RSCUTV27 I have checked the default web template 0ADHOC is already there for adhoc analysis.
Please can anyone tell me what the problem is?
I shall be thankful to you for this.
Regards
Pavneet Rana

Hi,
According to the error message,
The template ""0ADHOC" does not exist in the BI system. It has to be transported too.
OR
Logon to R3 and check in Transaction SE38 with program "RS_TEMPLATE_MAINTAIN_XX".
You will see
                                     Template ID :
                                     Reusable Web Item ID :
                                     Version :
Give "template name" and see what is the version.
If it is "D" then please change that to version "A". and check if issue persist.
Hope this helps.
Regards,
Mani

Erorr " The Web template "0ANALYZER" does not exist in the master system "

Hi
i am trying to run query from Query designer and execute in Web .i am trying to execute this in query designer. i am getting below error.
"The Web template "0ANALYZER" does not exist in the master system "
i activated all templates but not able to execute any report in web
i am able to execute same report in webaplication but not thru query desinger... do i need to setup anything.?
please do help me

For clarification:
If following happens:
> you are launching the query with URL like:
http://<server>:<port>/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=<your query name>
> then you get the error message "The Web template "0ANALYZER" does not exist in the master system"
--> then you should check the settings for default templates in SPRO. Please mention that the default Web Template for query execution (BEx Web Analyzer) is called 0ANALYSIS_PATTERN.
--> also check the 0ANALYZER Web Template in SE38 / Program: RS_TEMPLATE_MAINTAIN_70 -> then check if the template is active.
When you problem is other nature you have to describe it in detail.
Regards, Karol

Custom Web Template fails, List does not exist

Can somebody help me with this?
After I patched the SharePoint 2013 SP 1 to the April 2014 CU I've been getting this error.
When I apply a custom template I keep getting the error:
"Exception calling ApplyWebTemplate with 1 argument: List does not exist. The page you selected contains a list that does not exist. It may have been deleted by another user."
When I check the logs I found this:
"05/15/2014 11:04:31.83 PowerShell_ISE.exe (0x285C)
0x1A2C SharePoint Foundation
Feature Infrastructure 889w
High The element of type 'ListInstance' for feature 'test5ListInstances' (id: 2acac41f-5723-4e3e-985f-35620a5696fc) threw an exception during activation: List does not exist. The page you selected contains a
list that does not exist. It may have been deleted by another user.
01b11c40-f800-0000-e439-4b6b816fcf01"
And this:
05/15/2014 11:54:56.07 PowerShell_ISE.exe (0x1E1C)
0x1DF8 SharePoint Foundation
General aix9j
High SPRequest.GetMetadataForUrl: UserPrincipalName=i:0).w|s-1-5-21-3659363940-654044839-132917978-4964, AppPrincipalName= ,bstrUrl=http://portal.domain.com/customer/testerror1/Lists/TaxonomyHiddenList ,METADATAFLAGS=59
01b11c50-f800-0002-c532-4b6b816fcf01
Here are the full logs:
pastebin.com/vnHerVAw and another one: pastebin.com/RVg3kD5P

I've been going through the logs and its giving me this:
05/15/2014 11:54:56.07 PowerShell_ISE.exe (0x1E1C)
0x1DF8 SharePoint Foundation
General aix9j
High SPRequest.GetMetadataForUrl: UserPrincipalName=i:0).w|s-1-5-21-3659363940-654044839-132917978-4964, AppPrincipalName= ,bstrUrl=http://portal.domain.com/customer/testerror1/Lists/TaxonomyHiddenList ,METADATAFLAGS=59
01b11c50-f800-0002-c532-4b6b816fcf01
But I only created a teamsite with some libraries without anything extra so I don't know why its giving me that..
**Ends up beeing a permission issue, still having the other errors with list not found :S

Enterprise report TEMPLATE=0REPORT_DEFAULT_TEMPL does not exist

Hi guys ,
I have actvated the above mentioned template in business content but when i performed a check in RS_TEMPLATE_MAINTAIN_70 , iam getting the followiong error.
Enterprise report TEMPLATE=0REPORT_DEFAULT_TEMPL does not exist
Enterprise report TEMPLATE=0REPORT_DEFAULT_TEMPL does not exist
Web Item Report error: The report cannot be opened under "TEMPLATE=0REPORT_DEFAULT_TEMPLATE"
The report cannot be opened
The report cannot be opened under "TEMPLATE=0REPORT_DEFAULT_TEMPLATE"
Check whether the report is at this location and it can be read
Contact your system administrator. This error was recorded
Can anyone have some idea on this..
thanks

Any help on this??

"Language-dependent text does not exist" when executing template on portal

Hi,
We are using BI 7 on SP 8. When trying to execute a web template in the portal we are getting a series of errors such as:
Language-dependent text does not exist: TYPE=REP KEY1=SAPLRRSV KEY2=705 LANG=
Has anyone experienced this problem and know of a fix?
Thanks,
Lee

Yes we have. The problem is due to the support stacks for ABAP and for Java being out of sync i.e. they have to be on the same patch level. If you run program RSPOR_SETUP (via SE38) and enter the relevant details for checking the portal setup, this will detail all the errors.
Lee

The type or namespace name 'Optimization' does not exist in the namespace 'System.Web'

App_Start\BundleConfig.cs (1): The type or namespace name 'Optimization' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
Global.asax.cs (4): The type or namespace name 'Optimization' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
App_Start\BundleConfig.cs (8): The type or namespace name 'BundleCollection' could not be found (are you missing a using directive or an assembly reference?)
I'm getting the above errors when attempting to create a remote build.
I've tried the solution found here (http://blog.davidebbo.com/2014/01/the-right-way-to-restore-nuget-packages.html) but no luck.

Hi,
I have an asp.net mvc project in Visual Studio 2013. I'm hosting it on Visual Studio Online.
The project builds fine on my local machine/Visual Studio 2013. When i try to do a build on Visual Studio Online (i created a build definition there), i get similar errors.
App_Start\BundleConfig.cs (2): The type or namespace name 'Optimization' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
App_Start\FilterConfig.cs (2): The type or namespace name 'Mvc' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
App_Start\RouteConfig.cs (5): The type or namespace name 'Mvc' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
Controllers\HomeController.cs (5): The type or namespace name 'Mvc' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
Controllers\HomeController.cs (9): The type or namespace name 'Controller' could not be found (are you missing a using directive or an assembly reference?)
Global.asax.cs (5): The type or namespace name 'Mvc' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
Global.asax.cs (6): The type or namespace name 'Optimization' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
App_Start\BundleConfig.cs (9): The type or namespace name 'BundleCollection' could not be found (are you missing a using directive or an assembly reference?)
App_Start\FilterConfig.cs (8): The type or namespace name 'GlobalFilterCollection' could not be found (are you missing a using directive or an assembly reference?)
Controllers\HomeController.cs (11): The type or namespace name 'ActionResult' could not be found (are you missing a using directive or an assembly reference?)
Controllers\HomeController.cs (16): The type or namespace name 'ActionResult' could not be found (are you missing a using directive or an assembly reference?)
Controllers\HomeController.cs (23): The type or namespace name 'ActionResult' could not be found (are you missing a using directive or an assembly reference?)
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "System.Web.Helpers, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35,
processorArchitecture=MSIL". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "System.Web.Optimization". Check to make sure the assembly exists on disk. If this
reference is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "System.Web.Razor, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35, processorArchitecture=MSIL".
Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "System.Web.WebPages, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35,
processorArchitecture=MSIL". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "System.Web.WebPages.Deployment, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35,
processorArchitecture=MSIL". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "System.Web.WebPages.Razor, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35,
processorArchitecture=MSIL". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "WebGrease". Check to make sure the assembly exists on disk. If this reference is required
by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "Antlr3.Runtime". Check to make sure the assembly exists on disk. If this reference
is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "Newtonsoft.Json". Check to make sure the assembly exists on disk. If this reference
is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Assembly strong name "System.Web.Mvc, Version=__MvcPagesVersion__, Culture=neutral, PublicKeyToken=31bf3856ad364e35, processorArchitecture=MSIL" is
either a path which could not be found or it is a full assembly name which is badly formed. If it is a full assembly name it may contain characters that need to be escaped with backslash(\). Those characters are Equals(=), Comma(,), Quote("), Apostrophe('),
Backslash(\).

Saving photos to the web by creating events. Called the destination folder does not exist.

Hello,
I ask you for advice (assistance). A week ago I re-installed the PC and installed to the computer again Photoshop CS5. Everything works for me except for the function of storing images for web by creating events. Called me constantly destination folder does not exist. The problem I had before. I ask you this advice on how to solve this problem.
Thanks for the advice

hi,
i don't know if i integrate your code correctly, but it doens't work for me. I presently create skin for client and this plugin is really usefull for me.
i use win7 64bit home edition, and photoshop cs5
there is how i integrate this :
// EDIT ALEX GRENIER
function getPreferencesFolder() {
     var userData = Folder.userData;
     if (!userData || !userData.exists) {
          userData = Folder("~");
     var folder = new Folder(userData + "/xtools");
     if (!folder.exists) {
          folder.create();
     return folder;
function exportChildren(dupObj, orgObj, dupDocRef, folder) {
if (getCSVersion() >= 10) // CS3 Only
     // Create assets folder in Flex app's directory
     // var tempFolder;
     // tempFolder = new Folder (folder + "/assets/");
     // tempFolder.create();
     // EDIT ALEX GRENIER
     var tempFolder;
     tempFolder = getPreferencesFolder();
i put the code creating the folder in comment and put your code in place, i also put your function before the function creating file.
With the base code (without modification) photoshop is able to create my folder assets, but when it try to export the png, it export nothing, so i have a empty folder.
thank you,
Alex

WEB TEMPLATE DOES NOT EXIST IN Q

Similar Messages

Maybe you are looking for