Web template migration (3.5 - 7.0) & stylesheet is not found/used

Hey,
we just made some web template migrations from 3.5 to 7.0. After the migration was done successfully, the migrated stylesheet link is not working anymore. This came apparent by opening the web template in the browser where the standard colours and fonts of the sap css files are shown.
Does anybody know, how to add a own stylesheet within the WAD 7.0? The problem is, that obviously after migrating a template the link is not good anymore.
Thanks a lot for your help.

Hi Andreas,
I am on BI 7.0 and tring to change the look and feel of the web template by changing the Portal theme.
When I go to Portal themes I see an option for BI 3.0 reports and not BI 7.0 reports and when I make the changes to BI 3.0 reports they do not affect in 7.0 templates.
Can you please let me know how did you solve your problem, because changing Portal theme does not seem to help for BI 7.0 reports.
Thanks,
Vivek

Similar Messages

  • Web Template Migration Error in Chart

    Hi All,
      I have a 3x web template 'TEST_3X'
      It is derived from the SAP default 3x template 0QUERY_TEMPLATE with no
      major changes/customizing. Only a picture and a data provider has been
      assigned. It works fine.
      Now I tried to migrate 'TEST_3X' to a 2004s template using the Migration tool.
      Before doing this I migrated all items using the report
      <b>'RSZW_ITEM_MIGRATION_3X_TO_70'</b>.
      At the end of the process there is this error message "Make sure that the
      3x library item <b>0ADHOC_COLUMN_CHART</b> is migrated to 2004s via the report.
      See note 832712."
       However I cross checked the item '0ADHOC_COLUMN_CHART' in table
       <b>RSZWBITMHEAD</b> (target table for migration). It exists and is active.
       It also exists in table '<b>RSZWITEM</b>' (source table for migration) and is active.
       Any suggestions. Am I missing anything?
    Thanks
    Vishno

    Yes.
    See path below.
    https://websmp208.sap-ag.de/patches
    Entry by Application Group -->
    Support Packages and Patches" --> SAP Frontend Components" --> BI ADDON FOR SAP GUI" -->  BI 7.0 ADDON FOR SAP GUI 7.10

  • Query related to BEx query and web template migration

    Hi,
    We are upgrading our BW system from BW 3.5 to 7.3 and also planning to migrate the existing BEx 3.X queries and web templates to BEx 7.x version.
    We have BEx queries and web templates published on enterprise portal in roles.
    My query is that after we migrate BEx 3.5 queries and web templates to new version, do we need to re-publish these (migrated) queries and web templates on the portal or users will be able to access the reports without any issues.
    or are there any post migration steps that we need to follow so that reports (with migrated version) are available to the end users through portal as before.
    Thanks,
    Tarun.

    Hi,
    We are upgrading our BW system from BW 3.5 to 7.3 and also planning to migrate the existing BEx 3.X queries and web templates to BEx 7.x version.
    We have BEx queries and web templates published on enterprise portal in roles.
    My query is that after we migrate BEx 3.5 queries and web templates to new version, do we need to re-publish these (migrated) queries and web templates on the portal or users will be able to access the reports without any issues.
    or are there any post migration steps that we need to follow so that reports (with migrated version) are available to the end users through portal as before.
    Thanks,
    Tarun.

  • ADMT 3.2 Group Migration - Include File error: The object was not found in the domain

    Hello,
    I have been digging for weeks and still no answer. I am trying to migrate Group across two domains and if I select the group, it works just fine. But I want to bulk-migrate groups. So I am going the Include-File route. when ever I load the file I get
    the bulk of the groups processed but I get a dialogue box that states:
    The following objects are either not found or do not meet selection requirement. No migration will be performed on these objects.
    Then I get a list a group and the message states:
    The object was not found in the domain "contoso.com"
    Does any one know anything about this or how to fix it? I have compared the files with good/bad versions using ADSI edit and from its POV they look the same.

    Hi,
    Thanks for your post.
    There is an attribute named "showInAdvancedViewOnly" which specifies whether the object is to be visible in the "Advanced" mode of user interfaces. This is to say, if the schema attribute "ShowInAdvanceViewOnly" is set to TRUE for any security principal
    in AD, we would not be able to find that account or group while trying to migrate it except the simple ADUC search. Just as the issue you encountered.
    Therefore, please enable the "Advanced" mode in Active Directory Users and Computers, and then check if the three groups could be migrated or not.
    If anything unclear or you have any questions about this case, please feel free to let me know.
    Thanks and I look forward to your reply.
    Best regards,
    Ann Zhu

  • When I try to access a web page or link from a web page I receive an error message like "Server not found" or "Unable to connect." After repeated "try again" attempts the page will load, but when I click on a button or link, the same thing repeats. Why?

    When I try to access any web page or any link from a web page, I receive an error message such as "Server not found" or "Unable to connect." After repeated "try again" attempts that the page will load, but as soon as I click on a button or link, the same thing repeats. Any suggestions?

    When I try to access any web page or any link from a web page, I receive an error message such as "Server not found" or "Unable to connect." After repeated "try again" attempts that the page will load, but as soon as I click on a button or link, the same thing repeats. Any suggestions?

  • User Not Found Using Migration Assistant and Time Machine

    My iMac running Leopard kernel panicked which forced me to do a hard reset. After rebooting, the account I was logged in as disappeared. Fortunately, that wasn't the admin account. I logged into my admin account and thought I would use Migration Assistant to recreate the missing account (I did run Disk First Aid first to ensure the hard drive was in good working order). However, Migration Assistant does not list the missing user account when reading my Time Machine backup. I do see the user if I go directly into into Time Machine. I'm guessing that Migration Assistant may only be looking at the most recent backup which obviously doesn't contain the missing user.
    Suggestions on how to restore the missing user or how to get Migration Assistant to read all of the users in my Time Machine backups?

    BobParr wrote:
    I'm guessing that Migration Assistant may only be looking at the most recent backup which obviously doesn't contain the missing user.
    Correct.
    Suggestions on how to restore the missing user or how to get Migration Assistant to read all of the users in my Time Machine backups?
    How many backups were done after the problem occurred? One possibility would be to delete those backups (see #12 in the Frequently Asked Questions *User Tip,* also at the top of this forum), so the last one has the missing user's data, and Migration Assistant can find it. If you do that, once everything's properly restored, boot up from your Leopard Install disk, then reboot normally. That will trigger a "deep traversal" in the next backup, where TM will compare everything on your system to it's backups, thus assuring that nothing was lost via the earlier deletions.
    Another would be to do a full restore from Time Machine, per #14 in the FAQ.

  • Using my Web.Mail account with demon (THUS). I can NOT login using Firefox but I CAN with (choke) Internet Explorer. The login names and passwords ARE correct.

    Initially, the Demon support desk asked me to reset all my browsing history which did nothing.
    I tried Internet Explorer (7.0.5730.11) and this too failed initially but after several tries, I managed to log in and collect my mails.
    I then logged out and tried Firefox, which failed (Incorrect log in name or password).
    I immediately tried IE again and got in first time.
    In Firefox (TOOLS, OPTIONS, SECURITY, EXCEPTIONS), I set web.mail.demon.net to permit the site any access that might have been denied.
    The user name and password ARE correct (that would be too easy) but Firefox seems not to send one of these correctly ??? or is not sending something I.E. does.
    aarghhh

    From the Safari menu bar, select
    Safari ▹ Preferences... ▹ Extensions
    Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.
    If you wish, you may be able to salvage the errant extension by uninstalling and reinstalling it. Its settings will revert to their defaults. If the extension still causes a problem, remove it permanently or refer to its developer for support.

  • Error BRAIN 276 when you execute a Web template in BI Admin Cockpit in  EP

    Hi Experts,
    I have Installed BI Administration Business Packages in Portal and configured necessary steps in BI System.I have assigned the role in Portal and BI System.
    I tried executing one iview...and was getting the following error:
    Error loading template 0TPLI_0TCT_MCA1_Q0143
    and when i click on the above error ..i was getting another window which shows below message:
    Technical Information for Message:
    Error loading template 0TPLI_0TCT_MCA1_Q0143
      Notification Number BRAIN 276
    I was suggested by SAP Note 1014795 to do the below changes :
    TEMPLATE_ID=0TPLI_0TCT_MCA1_Q0143  To TEMPLATE=0TPLI_0TCT_MCA1_Q0143
    Please note that the above note says to replace  TEMPLATE_ID  by TEMPLATE in the property of "BEX Web application Query String" of the IView in Portal
    and also please note that i have Version=SAP BW 2.X/3.X in Iview Property .
    After having made the above changes iam getting the BEX Web Analyzer...where i have the options to open a query ( from all the infoareas of BI System).and then i will select the query (0TCT_MCA1_Q0143) and am executing the same to display the data.
    i know that this Is not the correct way of executing the iview for BI Admin Cockpit.
    Can anyone help me how to execute the Web Template automatically when the user clicks on IView ?
    we have all the above Web Templates Corresponding to BI admin cockpit in active mode in when checked from WAD 3.X , but when when i search for the above web templates in WAD 7.0 i do not find them
    Is there anything that i need to activate in BI System ? Or in Portal System?
    Or do i have to execute the above web templates in  BI WAD before linking them to portal iviews?
    Do we have to Migrate the Web Templates from  BW 3.5 to BI 7.O?
    Thanks
    P.Navakanth
    -When i try to execute the web templates

    We are having this exact same issue - example of one of the errors:: Error loading template 0TPLI_0TCT_MCA1_Q0114.  We get this error for all MCA1 templates.  Basis says they've deployed latest BP BI Administration 1.0 with Patch 2 (BPBIADMINOSP_2-1000342B.SCA).The info refers to BI Admin Cockpit, Business Package for BI Administration,
    BP BI ADMINISTRATION 1.0 ,BI Usage Statistics,0TCT_CA1.
    I see from documentationthat the multicube 0TCT_MCA1 is from 0TCT_CA1 and 0TCT_VCA1
    From the documentation in http://help.sap.com/saphelp_nw70/helpdata/en/26/9ef41d14dc424183b4807538be8e1e/frameset.htm, under web templates,
    1) How come there are more than 1 template with same name and Query with same names- for example:
    Web Template: Long-Term Trends in Total Runtimes of BI Applications
    WebTemplate: 0TPLI_0TCT_MC01_Q0114
    This Web template is the container for the query 0TCT_MC01_Q0114 and is designed to provide detailed analyses.
    AND
    Web Template: Long-Term Trends in Total Runtimes of BI Applications
    WebTemplate: 0TPLI_0TCT_MCA1_Q0114
    This Web template is the container for the query 0TCT_MCA1_Q0114 and is used for detailed analyses
    2) How come the delivered process chains load other technical content, but does not load 0TCT_CA1
    Basis re-deployed the bi admin cockpit contents, but still have error in loading template 0TPLI_0TCT_MCA1_Q0114.
    3) Do we need to do any of the following?
    SE38 u2013 run RSTCC_ACTIVATEADMINCOCKPIT_NEW
    RSA1 - bi content, install & transport
    Check role SAP_BI_BW_ADMINSTRATOR
    Se38 u2013 rs_template_maintain for active templates u2013 look for MCA1 templated
    Tr code RSDDSTAT
    Activate Virtual providers
    Anything else?
    Thanks!

  • Error on page from BW 3.5's default web template

    Hi Guru's,
    We have a problem in our new BWD BW 3.5 environment where we are getting the "error on page" error from SAP-generated code and we aren’t sure why.
    On our old BWT BW 3.0b platform, we have been using a modified version of the 0query_template called Z_QUERY_TEMPLATE. We did a system copy of BWT to BWD, our new BW 3.5 platform. At that point in time we would see our old BW 3.5 default template for queries that we ran. We wanted to see what the new default web template looked like in BW 3.5. We found where we could remove the Z_QUERY_TEMPLATE from the Web Adhoc Analysis web template setting so we could see the new features of the BW 3.5 default BEx query designer template instead of our old BW 3.0b default template.
    Now when we run a query through the BW 3.5 query designer on BWD, we are using BW3.5’s default template. The prompt web page is fine. No errors on page messages.
    However, the initial presentation of the query results displays okay, but shows "error on page" in the message bar at the bottom of the displayed page. As soon as we do any navigation on those query results that error on page goes away. If we navigate back to the initial presentation, all is still okay. If we use the context menu to go back to start, we again get the error on page.
    This error on page does not happen in BQ2 (our new BW 3.5 QA environment copied from our old BW 3.0b QA environment where we had not yet changed the default BEx Query Designer template to be Z_QUERY_TEMPLATE). We have tried several queries and in each case, we get errors on page in BWD, but not in BQ2. We used ultraedit to compare the view source output from the equivalent web pages from BWD and BQ2 and the only difference is the validity date of the data. There are no other differences in the javascript code generated by BW in the two platforms.
    The statement that Internet Explorer is saying is the problem is the same in each of the cases we have checked and that is:
    SAPBWSetFocus(anchor);
    Error: Object expected
    Code: 0
    It’s in the set_tab() function.
    <script type="text/javascript">
    <!--
    /* Calls the online Documentation via technical QueryName */
    function callquerydoc() {
      var docustart= '/sap/bw/doc/meta/fldmeta/default?tlogo=elem&objnm=' + document.getElementById('querydoc').innerHTML;
      SAPBWOpenWindow(docustart,'Documentation',800,600);
    /* Sets the displayed tab */
    /* Check, which items of the Array check_items  is not hidden.
        Change the style of the HTML tag with id Group+Area/Group+Link */
    function set_tab() {
         if (!(navigator.appVersion.substring(0,1) == '4' && navigator.appName == 'Netscape')) {
           var check_items = new Array('GR1Toolbar','GR2Chart','GR3TECommon','GR4Broadcaster');
        for (i=0;i<check_items.length;i++) {
                        hidden = true;
                       prop = SAPBWGetItemProp(check_items<i>);
                       if (prop != null){
                                           for(j=1;j<prop.length;j++){
                                                      if (prop[j][0] == "HIDDEN")  hidden = (prop[j][1] == "X");
                   anchor_item = document.getElementById(check_items<i>.substring(0,3)+'Area').firstChild;
                    if (hidden) {
                        document.getElementById(check_items<i>.substring(0,3)+'Area').className='SAPBEXTbsTab';
                        anchor_item.title = 'Inactive Tab Page:' + ' ' + anchor_item.title; 
                    else {
                        document.getElementById(check_items<i>.substring(0,3)+'Area').className='SAPBEXTbsTabSel';
                        anchor_item.title = 'Active Tab Page:' +' ' + anchor_item.title; 
              } /* if */
          }   /* for */
        /* Set the BexHeader invisible when running as IView */
            if (SAPBWGetProperty('RUNS_AS_IVIEW')) {
                               document.getElementById('bexheader').style.visibility='hidden';
                               document.getElementById('bexheader').style.display='none';
              anchor = window.location.hash.substring(1,50);
              <b>SAPBWSetFocus(anchor);</b>
      }  /*function */
    -->
    </script>
    Because the error goes away as soon as we navigate I’m thinking some object isn’t being created or initialized, but since the view source code of these pages are identical I’m wondering if there is some code that should be executing before this page that is not happening in BWD for some reason.
    Any help will be much appreciated.
    Thanks,
    Jeri

    Heike,
    Thanks for your help in this. BWD and BQ2 are both on the same SP. SAP_BW release 350 level 10 (SAPKW35010) with BI_CONT at release 352 level 5 (SAPKIBIEP5).
    I invalidated the server cache following your instructions and tried again, but am still having the same problem in BWD. The initial display gets the "Done, but with errors on page" message until any navigation is done.
    I am using IE 6.0.2900.2180.xpsp_sp2_rtm.040803-2158 when I execute queries on both BWD and BQ2.
    Please, do you have any other suggestions?
    Thanks,
    Jeri

  • Display system fields on web templates

    Is there any way to display system fields like SY-DATUM, SY-TZONE, etc. on a web template?
    I am talking about the fields NOT provided as general text elements (ROLLUPTIME, REPTXTLG, etc) in the text element web item.

    Sorry Nikhil, my java skills are not upto mark..
    but you can try the following
    <h4>It is now <script type="text/javascript">
    <!--
    var currentTime = new Date()
    var month = currentTime.getMonth() + 1
    var day = currentTime.getDate()
    var year = currentTime.getFullYear()
    document.write(month + "/" + day + "/" + year)
    //-->
    </script>
    </h4> ... I am sure some one over here will answer better..
    2) coming to accesing r3 tables.. i am afraid you may have to go for customer exits..
    regards,
    hari

  • List of Queries in a Web Template

    Hi
    Hope someone can help me. I have a list of web templates and need to get all the queries that are used in these web templates. I don't mind even using a function call or se16 in BW to do this.
    Cheers
    Paul Collier

    Hi
    We are still on BW 3.5 and I have 142 web templates to go through. Using the metadata repository is a little long winded.
    Do you perhaps know of another way?
    Cheers
    Paul

  • Web Template with multiple Data Provider Query with partial authority

    Dear Guru,
    I have a single web template, that contains 2 query data providers (e.g. Query A, Query B), and all users access to this web template for both queries.
    Now, there are some users that have authority to Query A only.
    When they access to this web template, the system automatically say the users do not have authority for Query B in the variable entry screen, and show the variable selection for query A only.
    And the problem comes, when user submit the variable entries, the system keep asking for the mandatory variables for query B, which the user actually not authorized to execute. How can this be fixed??
    Please kindly help me. Thank You.
    Best regards,
    Chris

    Hi all,
    I am looking into the use of Javascript and CustomExtension, but still cannot find any solution.
    Can I use CustomExtension to generate Javascript to redirect the page to another web template??
    Can I use Javascript to check authority of the users, and alter the Web Items?
    Can Anybody help? Many many thanks.
    Best regards,
    Chris

  • Problem applying web template

    We've recently upgraded from SharePoint 2010 to 2013. We created a new site under the 2013 environment then created a template from it. When we try to apply that template to a new site we get the following error:
    Problem applying web template
    It then list the following features as not installed:
    List Feature
    Module Feature
    Web EventReceivers Feature
    Property Bag Feature
    Here is a screenshot of the error
    We haven't noticed any other issue up to this point. Any assistance would greatly be appreciated.
    Thanks,
    Bill

    How many of those as solutions are from CodePlex? I think the property bag one is 
    http://featureadmin.codeplex.com
    It has a 2013 upgrade on 
    http://pbs2013.codeplex.com
    If its unclear what the other features these are, it may be worth running the feature manager. This will potentially enable you to identify and disable those solutions.  The link is 
    http://featureadmin.codeplex.com
    Steven Andrews
    SharePoint Business Analyst: LiveNation Entertainment
    Blog: baron72.wordpress.com
    Twitter: Follow @backpackerd00d
    My Wiki Articles:
    CodePlex Corner Series
    Please remember to mark your question as "answered" if this solves (or helps) your problem.

  • XML Import/Export of Web Template

    Hi, I'm looking to move a Web Template from Production to Development and I'm thinking of using the MetaData Repository XML Export/Import Functionalty.  My only concern is that is might not pick up the Binary Objects Generated by the template to store Chart Settings.
    Does anyone have any experience with this so?  Again my concern is the Binary objects.
    Thanks, Ken Murray

    You cannot export Web Templates using XML.  Only Objects for which there are Supporting BAPI's..
    http://help.sap.com/saphelp_nw2004s/helpdata/en/60/2edd3b8f1b127de10000000a114084/frameset.htm

  • Web Templates in Portal

    Chaps,
        We've got couple of Templates built for BW Reporting.
        Now, in the SAP Portal I noticed that the BW reports are shown in different customized web templates.
        My question is,
        (1) Can we have multiple Web Templates published in SAP Portal for different BEx reports ?
        (2) If there is a default setting for the Web Template that we do in RSCUSTV27 T-Code, how can we still have multiple Web Templates for BW Reports in Portal ?

    Hi,
    You can use different web templates for your BEx Reports depending on your requirement. You can include your reports in webtemplates and then integrate these web templates in portal by creating Iviews.
    The setting you make in Transaction RSCUSTV27 is for setting the Standard web template. This will be used
    when you execute a query in BEx Web Analyzer ( from Query designer).
    when you integrate a query in portal by providing the query name (instead of providing the web template name)
    By default the standard web template used is 0ANALYSIS_PATTERN. You can override this using transaction RSCUSTV27 or SAP Reference IMG under SAP Netweaver -> Business Intelligence -> Reporting-Relevant Settings -> BEx Web -> Set Standard Web Templates.
    http://help.sap.com/saphelp_nw04s/helpdata/en/f9/7f12403dbedd5fe10000000a155106/content.htm
    Regards,
    Hari
    Edited by: Hari Krishnan K on Jul 29, 2010 3:55 PM

Maybe you are looking for