Web Template Migration Error in Chart

Hi All,
  I have a 3x web template 'TEST_3X'
  It is derived from the SAP default 3x template 0QUERY_TEMPLATE with no
  major changes/customizing. Only a picture and a data provider has been
  assigned. It works fine.
  Now I tried to migrate 'TEST_3X' to a 2004s template using the Migration tool.
  Before doing this I migrated all items using the report
  <b>'RSZW_ITEM_MIGRATION_3X_TO_70'</b>.
  At the end of the process there is this error message "Make sure that the
  3x library item <b>0ADHOC_COLUMN_CHART</b> is migrated to 2004s via the report.
  See note 832712."
   However I cross checked the item '0ADHOC_COLUMN_CHART' in table
   <b>RSZWBITMHEAD</b> (target table for migration). It exists and is active.
   It also exists in table '<b>RSZWITEM</b>' (source table for migration) and is active.
   Any suggestions. Am I missing anything?
Thanks
Vishno

Yes.
See path below.
https://websmp208.sap-ag.de/patches
Entry by Application Group -->
Support Packages and Patches" --> SAP Frontend Components" --> BI ADDON FOR SAP GUI" -->  BI 7.0 ADDON FOR SAP GUI 7.10

Similar Messages

  • Web template migration (3.5 - 7.0) & stylesheet is not found/used

    Hey,
    we just made some web template migrations from 3.5 to 7.0. After the migration was done successfully, the migrated stylesheet link is not working anymore. This came apparent by opening the web template in the browser where the standard colours and fonts of the sap css files are shown.
    Does anybody know, how to add a own stylesheet within the WAD 7.0? The problem is, that obviously after migrating a template the link is not good anymore.
    Thanks a lot for your help.

    Hi Andreas,
    I am on BI 7.0 and tring to change the look and feel of the web template by changing the Portal theme.
    When I go to Portal themes I see an option for BI 3.0 reports and not BI 7.0 reports and when I make the changes to BI 3.0 reports they do not affect in 7.0 templates.
    Can you please let me know how did you solve your problem, because changing Portal theme does not seem to help for BI 7.0 reports.
    Thanks,
    Vivek

  • NW2004s template migration error

    I tried migrating a simple web template with a table item from 3.X to 2004S,SP6. The steps are give below:
    1 Created a template in WAD 3.X with a table item.
    2 Assigned the dataprovider
    3 Saved the template and executed in web-Works fine!
    4 Opened WAD2004s
    5 Selected the migration tool option.
    6 Selected the template created in WAD3.X
    7 Performed complete conversion, then close and edit
    8 New template is opened in the XHTML view.
    9 Saved the template and execute.
    ERROR:
    Exception in BI runtime
    Initial cause
    Message:
    Cannot find mapping for type "item.MIME_ITEM"
    Stack trace:
    com.sap.ip.bi.base.exception.BIBaseRuntimeException: Cannot find mapping for type "item.MIME_ITEM"
            at com.sap.ip.bi.base.service.object.impl.DefaultObjectFactoryService.instantiateType(DefaultObjectFactoryService.java:227)
            at com.sap.ip.bi.base.service.object.impl.DefaultObjectFactoryService.instantiateType(DefaultObjectFactoryService.java:211)
            at com.sap.ip.bi.webapplications.runtime.impl.Page.createPageObject(Page.java:1892)

    Yes.
    See path below.
    https://websmp208.sap-ag.de/patches
    Entry by Application Group -->
    Support Packages and Patches" --> SAP Frontend Components" --> BI ADDON FOR SAP GUI" -->  BI 7.0 ADDON FOR SAP GUI 7.10

  • Web template report error in portal

    Hi,
    I got this error message when trying to open reports from portal in production.
    How can I resolve this issue.
    General exception in deploy transformation for object "WEB_TEMPLATE"
    I don't get the same error in Quality and Development environments.
    thanks

    Hi Gurus,
       does anybody has any idea how I can resolve this issue.
    I couldn't find any problem with the web template.
    thanks

  • Query related to BEx query and web template migration

    Hi,
    We are upgrading our BW system from BW 3.5 to 7.3 and also planning to migrate the existing BEx 3.X queries and web templates to BEx 7.x version.
    We have BEx queries and web templates published on enterprise portal in roles.
    My query is that after we migrate BEx 3.5 queries and web templates to new version, do we need to re-publish these (migrated) queries and web templates on the portal or users will be able to access the reports without any issues.
    or are there any post migration steps that we need to follow so that reports (with migrated version) are available to the end users through portal as before.
    Thanks,
    Tarun.

    Hi,
    We are upgrading our BW system from BW 3.5 to 7.3 and also planning to migrate the existing BEx 3.X queries and web templates to BEx 7.x version.
    We have BEx queries and web templates published on enterprise portal in roles.
    My query is that after we migrate BEx 3.5 queries and web templates to new version, do we need to re-publish these (migrated) queries and web templates on the portal or users will be able to access the reports without any issues.
    or are there any post migration steps that we need to follow so that reports (with migrated version) are available to the end users through portal as before.
    Thanks,
    Tarun.

  • Web Template - Report Error

    Hello all,
    How r u ?
    We are getting this error while trying to select or modify the options in the report which is created using WAD.
    <b>An exception with the type CX_SY_DYN_CALL_ILLEGAL_TYPE occurred, but was neither handled locally, nor declared in a RAISING
    Call of the method IF_HTTP_UTILITY~ESCAPE_URL of the class CL_HTTP_UTILITY failed; wrong type for parameter UNESCAPED </b>
    Also, the graph is not shown if the data is more, otherwise its shown. What could be the reason ? Are there any setting to maintain for solving this ?
    Best Regards....
    Sankar Kumar
    +91 98403 47141

    Hi,
    Take a look on the note: 928633
    With rgds,
    Anil Kumar Sharma .P

  • Error saving Web Template

    Hi,
    when I try to save a Web Template this error appears:
    Java system error: call FM RSWR_TEMPLATE_PROCESS_PROXY to ProgId ... on host ... with SSO not authorized: Authenticat.
    Thanks in advance for all that can help.

    Hi,
    Check your Abap - Java communication setup:
    Note 983156 - BI configuration w. Template Installer.
    Note 917950 - SAP NetWeaver 2004s: Setting Up BEx Web.
    If this is all ok and you have still problems, check for dumps, or syslogs pointing
    to (probably) missing authorisation on S-RFC authorisation object.
    Regards, Patrick Rieken.

  • Error BRAIN 276 when you execute a Web template in BI Admin Cockpit in  EP

    Hi Experts,
    I have Installed BI Administration Business Packages in Portal and configured necessary steps in BI System.I have assigned the role in Portal and BI System.
    I tried executing one iview...and was getting the following error:
    Error loading template 0TPLI_0TCT_MCA1_Q0143
    and when i click on the above error ..i was getting another window which shows below message:
    Technical Information for Message:
    Error loading template 0TPLI_0TCT_MCA1_Q0143
      Notification Number BRAIN 276
    I was suggested by SAP Note 1014795 to do the below changes :
    TEMPLATE_ID=0TPLI_0TCT_MCA1_Q0143  To TEMPLATE=0TPLI_0TCT_MCA1_Q0143
    Please note that the above note says to replace  TEMPLATE_ID  by TEMPLATE in the property of "BEX Web application Query String" of the IView in Portal
    and also please note that i have Version=SAP BW 2.X/3.X in Iview Property .
    After having made the above changes iam getting the BEX Web Analyzer...where i have the options to open a query ( from all the infoareas of BI System).and then i will select the query (0TCT_MCA1_Q0143) and am executing the same to display the data.
    i know that this Is not the correct way of executing the iview for BI Admin Cockpit.
    Can anyone help me how to execute the Web Template automatically when the user clicks on IView ?
    we have all the above Web Templates Corresponding to BI admin cockpit in active mode in when checked from WAD 3.X , but when when i search for the above web templates in WAD 7.0 i do not find them
    Is there anything that i need to activate in BI System ? Or in Portal System?
    Or do i have to execute the above web templates in  BI WAD before linking them to portal iviews?
    Do we have to Migrate the Web Templates from  BW 3.5 to BI 7.O?
    Thanks
    P.Navakanth
    -When i try to execute the web templates

    We are having this exact same issue - example of one of the errors:: Error loading template 0TPLI_0TCT_MCA1_Q0114.  We get this error for all MCA1 templates.  Basis says they've deployed latest BP BI Administration 1.0 with Patch 2 (BPBIADMINOSP_2-1000342B.SCA).The info refers to BI Admin Cockpit, Business Package for BI Administration,
    BP BI ADMINISTRATION 1.0 ,BI Usage Statistics,0TCT_CA1.
    I see from documentationthat the multicube 0TCT_MCA1 is from 0TCT_CA1 and 0TCT_VCA1
    From the documentation in http://help.sap.com/saphelp_nw70/helpdata/en/26/9ef41d14dc424183b4807538be8e1e/frameset.htm, under web templates,
    1) How come there are more than 1 template with same name and Query with same names- for example:
    Web Template: Long-Term Trends in Total Runtimes of BI Applications
    WebTemplate: 0TPLI_0TCT_MC01_Q0114
    This Web template is the container for the query 0TCT_MC01_Q0114 and is designed to provide detailed analyses.
    AND
    Web Template: Long-Term Trends in Total Runtimes of BI Applications
    WebTemplate: 0TPLI_0TCT_MCA1_Q0114
    This Web template is the container for the query 0TCT_MCA1_Q0114 and is used for detailed analyses
    2) How come the delivered process chains load other technical content, but does not load 0TCT_CA1
    Basis re-deployed the bi admin cockpit contents, but still have error in loading template 0TPLI_0TCT_MCA1_Q0114.
    3) Do we need to do any of the following?
    SE38 u2013 run RSTCC_ACTIVATEADMINCOCKPIT_NEW
    RSA1 - bi content, install & transport
    Check role SAP_BI_BW_ADMINSTRATOR
    Se38 u2013 rs_template_maintain for active templates u2013 look for MCA1 templated
    Tr code RSDDSTAT
    Activate Virtual providers
    Anything else?
    Thanks!

  • Regardind web template -chart

    hi all,
    i created web templates,table and chart,while i excute that
    table is displaying but chat is not displaying
    it shows
    Diagnosis
    Internal error when communictaing with the IGS (charts).
    System response
    Internal error text: "Error opening an RFC connection."
    Procedure
    Procedure for System Administration
      Notification Number RSWWW 005 
    please help me.

    Hi Raj,
    You need the IGS (Internet Graphics Server) to be correctly setup and running to be able to see the charts. See details on these threads for setting it up and testing the IGS:
    Internal error when communictaing with the IGS (charts)
    igs test://forums.sdn.sap.com/click.jspa?searchID=6244907&messageID=611784
    https://forums.sdn.sap.com/click.jspa?searchID=6244907&messageID=4030099
    Hope this helps...

  • Error on page from BW 3.5's default web template

    Hi Guru's,
    We have a problem in our new BWD BW 3.5 environment where we are getting the "error on page" error from SAP-generated code and we aren’t sure why.
    On our old BWT BW 3.0b platform, we have been using a modified version of the 0query_template called Z_QUERY_TEMPLATE. We did a system copy of BWT to BWD, our new BW 3.5 platform. At that point in time we would see our old BW 3.5 default template for queries that we ran. We wanted to see what the new default web template looked like in BW 3.5. We found where we could remove the Z_QUERY_TEMPLATE from the Web Adhoc Analysis web template setting so we could see the new features of the BW 3.5 default BEx query designer template instead of our old BW 3.0b default template.
    Now when we run a query through the BW 3.5 query designer on BWD, we are using BW3.5’s default template. The prompt web page is fine. No errors on page messages.
    However, the initial presentation of the query results displays okay, but shows "error on page" in the message bar at the bottom of the displayed page. As soon as we do any navigation on those query results that error on page goes away. If we navigate back to the initial presentation, all is still okay. If we use the context menu to go back to start, we again get the error on page.
    This error on page does not happen in BQ2 (our new BW 3.5 QA environment copied from our old BW 3.0b QA environment where we had not yet changed the default BEx Query Designer template to be Z_QUERY_TEMPLATE). We have tried several queries and in each case, we get errors on page in BWD, but not in BQ2. We used ultraedit to compare the view source output from the equivalent web pages from BWD and BQ2 and the only difference is the validity date of the data. There are no other differences in the javascript code generated by BW in the two platforms.
    The statement that Internet Explorer is saying is the problem is the same in each of the cases we have checked and that is:
    SAPBWSetFocus(anchor);
    Error: Object expected
    Code: 0
    It’s in the set_tab() function.
    <script type="text/javascript">
    <!--
    /* Calls the online Documentation via technical QueryName */
    function callquerydoc() {
      var docustart= '/sap/bw/doc/meta/fldmeta/default?tlogo=elem&objnm=' + document.getElementById('querydoc').innerHTML;
      SAPBWOpenWindow(docustart,'Documentation',800,600);
    /* Sets the displayed tab */
    /* Check, which items of the Array check_items  is not hidden.
        Change the style of the HTML tag with id Group+Area/Group+Link */
    function set_tab() {
         if (!(navigator.appVersion.substring(0,1) == '4' && navigator.appName == 'Netscape')) {
           var check_items = new Array('GR1Toolbar','GR2Chart','GR3TECommon','GR4Broadcaster');
        for (i=0;i<check_items.length;i++) {
                        hidden = true;
                       prop = SAPBWGetItemProp(check_items<i>);
                       if (prop != null){
                                           for(j=1;j<prop.length;j++){
                                                      if (prop[j][0] == "HIDDEN")  hidden = (prop[j][1] == "X");
                   anchor_item = document.getElementById(check_items<i>.substring(0,3)+'Area').firstChild;
                    if (hidden) {
                        document.getElementById(check_items<i>.substring(0,3)+'Area').className='SAPBEXTbsTab';
                        anchor_item.title = 'Inactive Tab Page:' + ' ' + anchor_item.title; 
                    else {
                        document.getElementById(check_items<i>.substring(0,3)+'Area').className='SAPBEXTbsTabSel';
                        anchor_item.title = 'Active Tab Page:' +' ' + anchor_item.title; 
              } /* if */
          }   /* for */
        /* Set the BexHeader invisible when running as IView */
            if (SAPBWGetProperty('RUNS_AS_IVIEW')) {
                               document.getElementById('bexheader').style.visibility='hidden';
                               document.getElementById('bexheader').style.display='none';
              anchor = window.location.hash.substring(1,50);
              <b>SAPBWSetFocus(anchor);</b>
      }  /*function */
    -->
    </script>
    Because the error goes away as soon as we navigate I’m thinking some object isn’t being created or initialized, but since the view source code of these pages are identical I’m wondering if there is some code that should be executing before this page that is not happening in BWD for some reason.
    Any help will be much appreciated.
    Thanks,
    Jeri

    Heike,
    Thanks for your help in this. BWD and BQ2 are both on the same SP. SAP_BW release 350 level 10 (SAPKW35010) with BI_CONT at release 352 level 5 (SAPKIBIEP5).
    I invalidated the server cache following your instructions and tried again, but am still having the same problem in BWD. The initial display gets the "Done, but with errors on page" message until any navigation is done.
    I am using IE 6.0.2900.2180.xpsp_sp2_rtm.040803-2158 when I execute queries on both BWD and BQ2.
    Please, do you have any other suggestions?
    Thanks,
    Jeri

  • Getting error with Web Templates in BI 7.0

    Hi Everyone,
    We have upgraded BW3.5 to BW7.0. When we are executing any Web Template in browser we are getting this error-
    RSBOLAP 018 Java system error:call FM RSWR_TEMPLATE_PROCESS_PROXY to ProgId CHWSXID01.....
    For your information we have installed EP Usage and BI on the portal but Portal is not configured to the BI. Is it necessary to configure Portal to the BI?
    After this when we are login to the portal we are getting this error-
    500 Internal Server Error
    BEx Web Application
    Failed to process request; contact your system administrator
    Error Summary
    Exception occured while processing the current request; this exception cannot be handled by the application or framework
    If the information on this page does not help you locate and correct the cause of the problem, contact your system administrator
    To facilitate analysis of the problem, keep a copy of this error page Hint: Most Web browsers allow you to select all content, and copy and paste it into an empty document (such as in an email or simple text file)
    Root Cause
    The initial exception that caused the request to fail was: 
    Cannot find BI master system
    com.sap.ip.bi.base.service.connection.ConnectionException: Cannot find BI master system
    at com.sap.ip.bi.base.service.connection.impl.GenericConnectionPool.getMasterSystemAlias(GenericConnectionPool.java:81)
    at com.sap.ip.bi.base.service.connection.impl.GenericConnectionPool.getMasterSystemConnection(GenericConnectionPool.java:60)
    at com.sap.ip.bi.base.application.impl.Application.createService(Application.java:459)
    at com.sap.ip.bi.base.application.impl.Application.getProperty(Application.java:679)
    at com.sap.ip.bi.base.application.impl.Application.startApplicationStep(Application.java:279)
    Details: Full Exception Chain
    System Environment
    Server
    BI Java     Release: 7 - Patch level: 0000000013 - Description: BI Web Applications Java - Additional info:  - Production mode: true
    BI ABAP     unknown
    Java Virtual Machine     Java HotSpot(TM) 64-Bit Server VM - Hewlett-Packard Company - 1.4.2 1.4.2.14-070618-19:48-PA_RISC2.0W PA2.0W (aCC_AP)
    Operating System     HP-UX - PA_RISC2.0W - B.11.11
    Deployed SCAs
    SCA     Version     SP     Patch     Compiled     Deployed
    ADSSAP     7.00     13     0     2007-08-12 01:18:54 CEST     2007-11-17 02:43:53 CET
    BASETABLES     7.00     13     0     2007-08-12 01:36:38 CEST     2007-11-17 01:22:45 CET
    BI-BASE-S     7.00     13     0     2007-08-12 12:03:10 CEST     2007-12-08 09:58:16 CET
    BI-IBC     7.00     13     0     2007-08-12 12:03:28 CEST     2007-12-08 09:58:26 CET
    BI-REPPLAN     7.00     13     0     2007-08-09 07:49:39 CEST     2007-12-08 10:01:05 CET
    BI-WDALV     7.00     13     0     2007-08-09 07:49:47 CEST     2007-12-08 09:58:55 CET
    BIWEBAPP     7.00     13     0     2007-08-12 12:05:56 CEST     2007-12-08 09:43:55 CET
    BI_MMR     7.00     13     0     2007-08-12 01:37:49 CEST     2007-11-17 02:44:46 CET
    BI_UDI     7.00     13     0     2007-08-11 19:04:00 CEST     2007-11-17 02:46:49 CET
    CAF     7.00     13     0     2007-08-09 09:23:15 CEST     2007-11-17 02:53:13 CET
    CAF-KM     7.00     13     0     2007-08-09 07:54:22 CEST     2007-12-08 10:21:28 CET
    CAF-UM     7.00     13     0     2007-08-09 09:23:24 CEST     2007-11-17 02:54:18 CET
    CORE-TOOLS     7.00     13     0     2007-08-12 01:41:21 CEST     2007-11-17 01:19:15 CET
    EP-PSERV     7.00     13     0     2007-09-06 14:03:50 CEST     2007-12-08 10:02:22 CET
    EP-WDC     7.00     13     0     2007-08-12 12:41:08 CEST     2007-12-08 10:03:50 CET
    EPBC     7.00     13     0     2007-08-12 12:37:44 CEST     2007-12-08 08:07:23 CET
    EPBC2     7.00     13     0     2007-08-12 12:38:06 CEST     2007-12-08 10:03:56 CET
    JLOGVIEW     7.00     13     0     2007-08-12 00:16:00 CEST     2007-11-17 01:19:52 CET
    JSPM     7.00     13     0     2007-08-12 00:17:00 CEST     2007-12-06 16:41:39 CET
    KM-KW_JIKS     7.00     13     0     2007-08-12 01:45:19 CEST     2007-11-17 02:54:37 CET
    KMC-BC     7.00     13     0     2007-08-12 12:41:47 CEST     2007-12-08 10:05:28 CET
    KMC-CM     7.00     13     0     2007-08-12 12:43:04 CEST     2007-12-08 10:06:52 CET
    KMC-COLL     7.00     13     0     2007-08-12 12:43:35 CEST     2007-12-08 10:07:49 CET
    LM-PORTAL     7.00     13     0     2007-08-09 07:58:38 CEST     2007-12-08 10:07:59 CET
    LM-SERVICE     6.40     10     0     2004-12-23 01:42:43 CET     2007-11-17 01:18:14 CET
    LM-TOOLS     7.00     13     0     2007-09-06 10:46:34 CEST     2007-11-17 03:05:32 CET
    NET-PDK     7.00     13     0     2007-08-12 12:45:34 CEST     2007-12-08 09:51:51 CET
    RTC     7.00     13     0     2007-08-12 12:48:07 CEST     2007-12-08 09:51:56 CET
    RTC-STREAM     7.00     13     0     2007-08-12 12:48:07 CEST     2007-12-08 10:08:05 CET
    SAP-EU     7.00     13     0     2007-08-09 08:01:01 CEST     2007-12-08 10:19:31 CET
    SAP-JEE     7.00     13     0     2007-08-12 01:53:11 CEST     2007-11-17 01:24:19 CET
    SAP-JEECOR     7.00     13     0     2007-09-07 08:23:34 CEST     2007-11-17 01:27:06 CET
    SAP_JTECHF     7.00     13     0     2007-08-12 01:56:44 CEST     2007-11-17 01:28:18 CET
    SAP_JTECHS     7.00     13     0     2007-08-12 01:59:51 CEST     2007-11-17 02:32:48 CET
    UMEADMIN     7.00     13     0     2007-08-09 09:39:47 CEST     2007-11-17 03:06:23 CET
    UWLJWF     7.00     13     0     2007-08-12 12:52:23 CEST     2007-12-08 10:08:51 CET
    VCBASE     7.00     13     0     2007-08-12 12:52:34 CEST     2007-12-08 10:22:05 CET
    VCFLEX     7.00     13     0     2007-08-12 12:53:39 CEST     2007-12-08 10:21:32 CET
    VCFRAMEWORK     7.00     13     0     2007-08-12 12:53:51 CEST     2007-12-08 10:21:42 CET
    VCKITBI     7.00     13     0     2007-08-12 12:23:20 CEST     2007-12-08 10:22:10 CET
    VCKITGP     7.00     13     0     2007-08-12 12:53:51 CEST     2007-12-08 10:22:15 CET
    VCKITXX     7.00     13     0     2007-08-12 12:53:51 CEST     2007-12-08 10:22:19 CET
    WDEXTENSIONS     7.00     13     0     2007-08-09 08:05:30 CEST     2007-12-08 10:24:17 CET
    Full Exception Chain
    Log ID     00306EF4B9BB0076000000120000327700044245C894263C
    com.sap.ip.bi.base.service.connection.ConnectionException: Cannot find BI master system
         at com.sap.ip.bi.base.service.connection.impl.GenericConnectionPool.getMasterSystemAlias(GenericConnectionPool.java:81)
         at com.sap.ip.bi.base.service.connection.impl.GenericConnectionPool.getMasterSystemConnection(GenericConnectionPool.java:60)
         at com.sap.ip.bi.base.application.impl.Application.createService(Application.java:459)
         at com.sap.ip.bi.base.application.impl.Application.getProperty(Application.java:679)
         at com.sap.ip.bi.base.application.impl.Application.startApplicationStep(Application.java:279)
         at com.sap.ip.bi.base.application.impl.Application.initialization(Application.java:259)
         at com.sap.ip.bi.base.application.ApplicationFactory.createApplication(ApplicationFactory.java:172)
         at com.sap.ip.bi.base.application.ApplicationFactory.createApplication(ApplicationFactory.java:65)
         at com.sap.ip.bi.webapplications.runtime.impl.Page.constructPage(Page.java:942)
         at com.sap.ip.bi.webapplications.runtime.impl.Page.<init>(Page.java:761)
         at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller.createPage(Controller.java:511)
         at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller.doProcessRequest(Controller.java:972)
         at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller.processRequest(Controller.java:864)
         at com.sap.ip.bi.webapplications.runtime.jsp.portal.services.BIRuntimeService.handleRequest(BIRuntimeService.java:488)
         at com.sap.ip.bi.webapplications.runtime.jsp.portal.components.LauncherComponent.doContent(LauncherComponent.java:22)
         at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
         at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
         at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
         at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
         at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
         at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
         at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
         at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
         at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:524)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:407)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    Helpful answers will be rewarded....
    Thanks and Regards,
    Pankaj

    Single Sign On is optional.
    What would happen is that the user that's using the Web Application Designer will have to have access to Portals, and the portal Sign On screen will appear once that user executes a Web Template.
    It also depends on the Portal Strategy and the Security Strategy of your client. For example, the portal may only grant access to those used IDs in the Active Directory, so if your BEx WAD user is not defined in Active Directory that user will not have access to portals, and will not be able to execute the Web Template.
    Cheers.

  • Web UI Client - Error Loading template 0TPLB_MKTG_C01_Q0001_V01

    Hi
    Please can any one help on this below error
    Error Loading template 0TPLB_MKTG_C01_Q0001_V01
    I have activated the Template in BI Content and able to check the same in WAD and also in RS Template Maintain in BI system.
    But as soon as i go to CRM Web UI portal and click on that link its saying Error Loading template 0TPLB_MKTG_C01_Q0001_V01.
    I have also given the settings in CRM SPRO --> Display SAP BI Netweaver Reports --> Given the Web Template id, but still iam not able to get the template worked..
    Could any one of you suggest.
    Thanks in advance

    Hi Amit,
    Can u pls help us in knowing solution if u have fixed this issue.
    Thanks,
    Ravi

  • MII 14.0 SP4 :Migration error while importing SAP BM Templates

    Hi Experts,
    I am facing some migration errors while importing SAP Batch Manufacturing Templates into MII 14.0 SP4.
    There are almost 23 transactions which are not getting imported and the error message for all of them is-
    "Unable to migrate transaction Unable to import file
    <Name of the Transaction>"
    Any first hand experiences will be really helpful for me to proceed further.
    Regards,
    Muddassar Khan

    Hi All,
    Got the solution. The STARTUP.BAT file is been placed in the installation directory(usr/sap) and then it works fine. Also I have installed the patches and all working fine.
    Any way thanks for the answer christian libich.
    Regards
    G.Partheeban

  • 500 Internal server error in web template  for specific users

    Hi We have issue with Web templates for some of the users giving error  "500 internal Server Error", all other users able to run the same report.
    We have authorization for the user and following variable which will give target currency selection in variable screen.
    SAP BI Environment
    BI Java : Release: 7 - Patch level: 0000000107 - Description: BI Web Applications Java - Additional info:  - Production mode: true  BI JAVA SPS : 7, Patch : 0
    BI ABAP : Release: 701 - Patch level: 0007 - Description: SAP Business Warehouse (PBICLNT005) - Additional info:  - Production mode: true
    Java Virtual Machine : Java HotSpot(TM) 64-Bit Server VM - Sun Microsystems Inc. - 1.4.2_28-b03
    Operating System :  Windows 2003 - amd64 - 5.2
    Error Message :
    ERROR: Specify a value for variable Select Target Currency
    ERROR: Specify a value for variable Select Target Currency
    Root Cause :
    The initial exception that caused the request to fail was:
    com.sap.ip.bi.bics.dataaccess.resource.impl.bi.exceptions.BicsResourceBwRuntimeException:
    at com.sap.ip.bi.bics.dataaccess.resource.impl.bi.selector.ProviderSelectionObject.initializeState(ProviderSelectionObject.java:932)
    at com.sap.ip.bi.bics.dataaccess.resource.impl.bi.queryview.ProviderQueryView.initializeState(ProviderQueryView.java:109)
    at com.sap.ip.bi.bics.dataaccess.resource.impl.bi.selector.ProviderSelectionObject.hasDefaultView(ProviderSelectionObject.java:1462)
    at com.sap.ip.bi.bics.dataaccess.consumer.impl.selector.SelectionObject.initializeState(SelectionObject.java:516)
    at com.sap.ip.bi.bics.dataaccess.consumer.impl.queryview.QueryView.initializeState(QueryView.java:198)
    please let me know if any of you guys had this kind of problem.

    SLD is not down its in active , I checked SLD url and Technical system also
    Its in active , but when the problem is happend they done restart 
    but many times its happening every time restart is not preferrable ,upto that one is production system.
    SLD is in active , but why the JCO'S ARE DISABLE under content Admin
    where we can search the SLD user , we checked in SU01 but the user didn't exist there
    If user is lock in the sense after the restart again it's working fine
        I want to know the Root cause , why bcz it's simultaniously happend.
    Regards,
    SONY

  • Problem of Chart in Web template

    hi friends,
    I  have created a chart in a web template,  however the chart is displaying the material number along with the calendar week, is it possible to have it only display the calendar week?  I also wanted to know if it is possible to insert a trend line in a chart within the Web App. Designer. guide and help me'.....
    Thanks in advance,
    Gopi
    Edited by: Gopi Nath on Oct 7, 2008 7:19 AM

    Hi Gopi,
    Dont select the Material number in the query or query view which you are using for that Chart. So that, you will be having only Calender Week followed by the Key figures which are required.
    Please let me know if you are not clear on this...
    REgards
    Gattu

Maybe you are looking for

  • I need an event to repeat on the 1st Thursday of every month; the only option I have is every 6th or every 8th day.

    I would like to have a repeating event on the first and third Thursday of every month. I cannot make a repeating monthly event on the same day of the week. Also, I keep getting an overlay on my Yahoo screen that says I must have logged out or closed

  • Running Excel macros from ABAP

    Hello everyone, I am trying to execute an Excel macro from an ABAP program.  We are currently on a 46C system.  While doing some research on help.sap.com I came across the method execute_macro in class i_oi_document_proxy.  I’ve never used methods in

  • Reinstall on another computer

    I want to buy illustrator СS6, but several times a year I go to another city and I need to reinstall program from the my computer to the my laptop, I can do this? which license should I buy?

  • Super slow rendering

    Hi, I just rendered out a 6 min sequence in Color, 1080i, uncompressed on a PowerMac G5 with 4 Gigs of RAM. It took about 3.5 hours. Would an 8 processor Mac speed things up, or would a higher end video card be more beneficial? We use an ATI Radeon 2

  • Adding index to Master Data

    I would like to add an index to a master data table. I am considering using the standard SAP Index Maintance screen on the underlying table. Can anyone tell me if this could lead to issues, and if they have another method of adding an index. My prima