Web templete showing "EA" in the Key figure but not in Bex Report

Hi,
When I exucute my query in BEx , the report works fine , but while exucuting in Web , "EA" is getting added after every Key figure Value..
Can you pls help us with any input ?

Ajay,
I think you did't understood the problem correctly .
My Bex report don't have any Quantity Key figure So in bex report no Unit( If I think EA is Unit ) is coming . Same should come while executing in Web . But the Problem is in Web some EA symbol is coming .
N.B : Our system just undergone SP upgrade .

Similar Messages

Can we filter the Key figure ( by not using Bex Conditions)

Hello Friends,
I have a requirement in which I am passing the result of one query "A" to another query "B" ( using replacement path). Also there is a requirement to filter the keyfigure of the query "A"
Problems I face:
1) If I use Conditions, it does'nt filter the actual rows from the info cube, but just the query result
2) Hence when I pass the query result of "A" to query "B", it sends more records which I dont need.
Question:
Hence is it possible to filter the keyfigure values at the database level?
Thanks... Hope some one will guide me.....................

Hi,
I've had a similar problem in the past, not specifically for a replacement path but because the number of rows returned by the query was too great to use conditions. In the end what I did was create a characteristic char version of the key figure that was loaded from the same source as the key figure. You then effectively have a key figure that can be filtered in the same way as a normal characteristic.
Hope this helps.
Gareth

HT2513 my iCal shows events in the "month" view but not in the "week" view? why is that?

my iCal shows events in the "month" view but not in the "week" view? why is that? doesnt sync automatically all the time only sometimes

my iCal shows events in the "month" view but not in the "week" view? why is that? doesnt sync automatically all the time only sometimes

Calculate key figures are not important to reports

Hello Experts,
How can I delete a calculated key figure from the query when the change of report query is not accessible from the analyzer?
Thank you

If you can create a new workbook you can. Simpy right-click on "Key figures" in the BEx Analyzer, remove the specific C-KF from the displayed list of keyfigures and the save the Workbook. You should check if you have the authorization rights to save this new Workbook into existing roles, or just your Favourites.
Altering the Query is a bit more work though.

When I import photos they show up in the photo tab but not in events. Not sure what's going on.

Today I tried to import photos from my camera into iPhoto 11. No problems up until today. I imported the photos as usual, but they did not show up in the events section. I went to the Photo section and they appeared there. I could even name the event there, but it still wasn't visible in Events. The only way to get it to show up was to merge the events in the Photo section into an event that was appearing and then split the event. Very strange. I imported from my iPhone 5 with no problems. Photos appeared in both Events and Photos. Anyone else have this happen? Solutions? I called support and they did not have any suggestions other than to try to restart computer. That didn't solve it.

You are probably looking in the wrong place - all photos in Photo view and in event too unless you have a corrupted library
most common cause of your not finding them is bad sort - view menu ==> sort events
Nest most common cause is a bad data/time on the camera - this can be corrected using a smart album to find the photos from that camera and then using using the adjust time/date command to fix the bad ones
YOu can alwasy find the event a Photo is in by selecting it and selecting show event
LN

Podcast artwork shows up in the iTunes store, but not after downloading

I have several podcasts in iTunes and the artwork for all the shows show up in the iTunes store without an issue. However, if you download a podcast, the artwork does not show up in the library of iTunes or transfer to the iPhone.
All images are 600X600
Any Ideas?
My podcasts are part of the Music Podcast Network. If you search "mpn" in iTunes, they are easily found. MPN: Pop, Country, Hip-Hop, etc.
I also use Feedburner. Here is a link to one of my shows:
http://feeds.feedburner.com/mpnpop
Any help would be appreciated.

Thank you. However the answer is more for someone who is downloading podcasts, while I want to make sure there is not an issue when someone downloads one of my podcasts. I use smartfeed in feedburner and have the image included. When I preview the image in feedburner, it looks perfect. However, the image is not being downloaded in iTunes when you download a single episode. I also have the image selected for each episode when I publish on my libsyn accounts. An example is: http://mpnpop.libsyn.com/
Still confused here. Any help would be most appreciated!

My recent purchases show up in the iTunes store but not in my library and when I try to transfer it, it says "This Computer is already associated with an Apple ID"

I just got a new iPhone 4S to replace my old iPhone 4S. There were some songs I purchased on my iPhone that were not on my iTunes library on the Mac. Now I lost them. The thing is, if I open the iTunes store on my Mac and go to "Purchased", the songs I bought on my old iPhone show up. They are also in my library, but there is an exclamation point next to them and they will not download onto my new iPhone! Help!!!!

I'm having the exact same problem and I am the only person who has ever been logged on to this computer to use iTunes Match. Only my wife also uses this computer, and she has never used or signed up for Match.
Interestingly, I have the same number of days listed on my error, 82 days.
Obviously, Apple has screwed up somewhere. I've put a help request in. If we cannot find a solution, we'll have to let everybody know that Match is a ripoff and that all should avoid this fraud like the plague...
Shalom, y'all!
L. Bangs

My bookmarks only show up on the mobile Firefox, but not in the desktop browser. How can I fix it?

This is how it all happened:
1. Bookmarks first disappeared on one of my desktop computers.
2. Bookmarks disappeared on another desktop computer. Additionally I was unable to bookmark any new page - after I press the star button it would be blank (not yellow).
3. I can see my bookmarks on my tablet with updated Firefox Beta. But I am worried they will disappear soon too.
4. When I checked the Sync Quota it shows that Bookmarks only use few kilobytes even thought I have hundreds if not thousands of bookmarks.
5. I have reinstalled the browser removing all personal data, but the only thing that changed is - I now can add bookmarks, although not through Right Click->Bookmark This Link.
I strongly believe this is a bug in the Sync system and am now considering switching to chrome

'''Did you backup whatever bookmarks you did have on the computer ? '''
Remember any restoring of bookmarks overwrites whatever he current set is, and you may not want to loose them.
Even if up until now you have not made any backups of Desktop bookmarks Firefox will have backed up some of them into sets of daily bookmark backups. Once you have backed up your current set you could look at what it has by restoring those bookmarks, you may find one of those sets is fairly complete.
By the way if you look at the profile files and folders that you should now have on the desktop you should see it contains a bookmarks backup folder, the size of the files within should indicate whether they contain anything.
You need to go into the bookmarks library and try the restore option. Backup each set that you look at if it has anything of use in it, before trying the next set. With look one of those will be a fairly complete set of bookmarks.
* USE '''Show All Bookmarks -> Import and Backup -> Restore '''
** see [[Restore bookmarks from backup or move them to another computer#w_restoring-from-backups]]_restoring-from-backups
I do not use Firefox on mobiles, but before you try anything further you do need to backup the desktop bookmarks and learn what existing backups you have. Unless you master that you are in continual danger of overwriting and loosing bookmarks.
Presumably you have already found this listing of help articles for mobiles
* [/products/mobile/bookmarks]

My songs show up in the iTunes library but not on my iPod

I had my songs on my iPod Touch 3rd Generation for and I plugged it in over night. The next day I went to my music on my iPod and it said "No content available. Download songs from iTunes" I went to iTunes on my Dell computer and they are all there. I got most songs back except for ones I recently purchased.

This might sound weird, but here's an idea which worked for me re music that was newly added to itunes and showed up in my ipod but wouldn't play - I simply played the tracks in itunes first, just a second of time or so will do it, not the whole track, then connect the ipod and sync again and this time they played - hope this helps.

Key figures in Cost elemnt based report

Dear All,
I have created a Cost Element based Report for the Project using report painter. In this same report, I want to pull a key figure(the key figure is 'remaining forecast planned costs") which is coming from cost forecasting report (Report 12CTC1 from transaction CJE0).
The issue is this 'key figure' is not available for report made in report group 6P3(report group for cost element based report). Is there anyway I can pull this particular key figure in my report.
Thanks in advance !
Regards,
Mahendra Dighe

Also if you're using HR data, the employee data is time dependent, so that for each employee number there are any number of records. This may be causing the aggregate reporting condition that you mentioned. In BW it's important to recognize that the master data also can play a role in how many records are returned. The infoprovider is not the only source of additional records. For example:
Employee has three records in the time range.
Salary infoprovider has only one.
Results will contain THREE records, one for each employee record, all with the same salary record. On an aggregate basis, the salary results will be multiplied by three.
Time dependent master data can be a source of much confusion. For some HR reporting, I have created a 'most current' employee master data record that is not time dependent, and is loaded daily. I then use that for data models such as salary or other separate infoproviders.

Key figures in cost element based report

Dear All,
I have created a Cost Element based Report for the Project using report painter. In this same report, I want to pull a key figure(the key figure is 'remaining forecast planned costs") which is coming from cost forecasting report (Report 12CTC1 from transaction CJE0).
The issue is this 'key figure' is not available for report made in report group 6P3(report group for cost element based report). Is there anyway I can pull this particular key figure in my report.
Thanks in advance !
Regards,
Mahendra Dighe

Also if you're using HR data, the employee data is time dependent, so that for each employee number there are any number of records. This may be causing the aggregate reporting condition that you mentioned. In BW it's important to recognize that the master data also can play a role in how many records are returned. The infoprovider is not the only source of additional records. For example:
Employee has three records in the time range.
Salary infoprovider has only one.
Results will contain THREE records, one for each employee record, all with the same salary record. On an aggregate basis, the salary results will be multiplied by three.
Time dependent master data can be a source of much confusion. For some HR reporting, I have created a 'most current' employee master data record that is not time dependent, and is loaded daily. I then use that for data models such as salary or other separate infoproviders.

Some key figure are not update for movement type 101

Dear All,
I have done load for Inventory and now i am finding that for some material the with movement type 101 the key figures are not getting populated, for these materials the values in characteristics is getting populated fine.
I have loaded the data according to stranded procedure in "How to Load...."
I have checked the values of material in R3 and it is there.
Example of the record::
Material    Plant Movement type Calender Day    quanity Base Unit
10101      01       350                     01.02.2006     20             KG
10101        01       101                     05.07.2006                      KG
10101         01      101                      10.07.2006                      KG
The Quantity is not appearing in second and third record.

Hi,
Please check whether you have set ''Rule groups'' at transfermation level . There you can set the conditions like materials having movement type X can be updated to one Key Figure and material having movement type Y can be updated to another Key figure.
Please check whether you have set this option at transfermation level.
For example, may be in your case materials from different plants are updating to different key figure.
Thanks,
Edited by: kavitha nagandla on Feb 17, 2010 7:19 AM

Input Enabled Query - Web Template - Not able to change the key figure.

Hello IP Gurus,
This is a simple question .
I have input enabled query and for all the KF's , I selected the radio button - data can be changed using user entries or planning functions , Equal Distribution and No disagrregation.
I attached the query to a web template.
When I execute the template I am not able to enter or change the key figures.
Do I have to use any planning function to do that in the web template or I am missing any configuration . Please let me know how to change or enter the key figures
Thanks
Senthil

HI Senthil,
Please ensure that u have enabled the property " start Query in changed Mode". This u can find it in the query properties under the advanced tab.
For the Input readiness this alone is not enough.You have to use all the charecteristics that u have in the multiprovider or the aggregation level over which the query is built.
regards.
Shafi.

Fiscal year in the columns outside the key figure structure

Dear Experts
I have a report requirement to show the keyfigures in the columns from year 1 to year 10 and in each year there are 4 keyfigures each restricted to 1 quarter for 4 quarters.
So, there are too many keyfigures to create.
I am using fiscal year in the columns outside the Key figure structure containing the keyfigures restricted at each of 4 quarters.
So, when the report displays, all the 10 years will automatically be displayed.
The problem is one of the 4 quarter level keyfigures needs to be restricted by calendar year.
How can I read what is the fiscal year for each column at runtime so that I can reference this value to determine the calendar year ?
As you know, each FY spans 2 Calendar Years. So, i need to restrict this on the 4th keyfigure by calendar year but while having the FY outside the keyfigure structure i can get all the FY, I am not sure how to access this value at runtime so that eg.
if FY for column 1 is 2010, i can set calendar year to be 2010 to 2011.
Hope you can give me some clues.
Thanks you Gurus!
Best regards
John

Dear Sunnybt
Copy Riyes, I find your response interesting. Please could you elaborate your idea of using condition in more detail.
Sorry for my late response.
Allow me to clarify my statement, which you are right, is unclear.
By :
"if the current QuarterFY is less than the current QuarterFY"
I mean :
eg. user enters FY range : 2009 to 20NN (eg. 2017)
KF_column1_FY2009_Q1______KF_column2_FY2009_Q2____KF_column3_FY2009_Q3______KF_column_FY2009_Q4______KF_column_FY2010_Q1______KF_column2_FY2010_Q2____KF_column3_FY2010_Q3______KF_column_FY2010_Q4_____KF_column_FY_NNNN_Q1
For each column, where the FY can be any year range entered by user,
the Text Description of the Column should show either 'Actual' or 'Plan' based on what is the current FY Quarter at runtime.
If the FY Quarter (eg. 1st column is 200101) is before current FY Quarter (i.e 201103), then the Description of this column should be "Actual" , else "Plan".
In my current design, I am unable to use customer exit text variable to meet this requirement.
So, I like to check with you for fresher ideas.
If not , I would use a workbook, which I am avoiding as the user needs to drilldown and I believe drilldown is not possible in workbooks where report layout needs to be rigid or cell positions fixed. Of course, unless there is a way out of this which I do not know.
Best regards
Bass

Setting the values of the key figures

Hi,
I have a problem in a query. There is a variable chosen with a range for 0calmonth. For the two of the key figures, I need to restrict the key figure to the first period and for the other key figure I need to restrict to the last period. However, what I need more is that if in the restricted period there is no value for that key figure it should get the first period that it has a value. For example:
Our variable set as: 02.2006   - 05.2006
And our data is
     CalMonth          KeyFig1     KeyFig2
A     02.2006                 0            7
A     03.2006                 0           8
A     04.2006                 4            9
A     05.2006                  5            0
I want to see in the query as:
              KeyFig1    KeyFig2
A              4                9
When I add the results with first value and last value, I can see these figures in the general results section. But this time I have to hide the key figures and show only the results section.
Any idea on preparing such a query?
Thanks in advance...

Hi,
try using conditions:
http://help.sap.com/saphelp_nw70/helpdata/en/43/2695d2fd2f0d23e10000000a1553f7/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/43/b57138c1afbd20e10000009b38f889/content.htm

Web templete showing "EA" in the Key figure but not in Bex Report

Similar Messages

Maybe you are looking for