Web traffic analysis software

we are hosting about 25 virtual domains and i'd like to use web log analysis software that can easily differentiate between all of our virtual domains and not group them all together.
can someone recommend something that they are using that is stable, easy to install and configure and affordable?
thanks!

Go here for what you are looking for:
http://discussions.apple.com/thread.jspa?messageID=7007886

Similar Messages

  • Have any source code can produce a web traffic analysis?

    I want to get the source code to produce a web traffic analysis report, for example i input a tomcat's access_log, it can analysis this log file and then output the analysis result in html file format.
    I have already found a source code to parsing the IE's log file, but i can't find a source code to parse the tomcat's access_log file.
    Have anybody know where can download this source code.......Thank a lot!!!!!

    I also want to know how to do this........

  • How to configure DNS server to redirect all web traffic to one external website?

    I'd like to use the DNS service on my OS X Server as a way to force all all web traffic to one specific, external website. Not quite sure how to go about configuring it, though - any recommendations?
    (BTW, this is, obviously, not our primary DNS server; I intend to silently update the preferred DNS server for users who fail to complete their timesheets in order to force the issue)

    Web clients don't generate uniquely-identifiable DNS queries; there's no SRV request or related traffic that you could select on and spoof.  So if you do implement this, everything querying the spoofing DNS server will get the spoofed host, or you'll have to spot specific queries that are likely web queries; Facebook, Google, Bing, etc. 
    If you still want to implement this, then I'd probably replace the DNS server with a runt DNS server (maybe hack dnsmasq or maraDNS, or create yourself a trivial DNS server) and have that always return the specified IP address.  This avoids having to hack BIND to be universally authoritative, which is probably on par with hacking a simpler DNS server to always return a fixed IP address, and the latter is probably easier to undo.
    A firewall can spot TCP port 80 and port 443 traffic, unlike a DNS server.   Firewalling outbound port 80 traffic is more typical of these requests, and either trap that traffic to a specific web page based on the capabilities of the firewall, or the web proxy approach that Camelot suggests.  There are folks that tie access into the web proxies into external authentication and related; that'd be able to do what you want.   Web proxies are usually combined with firewall blocks, as most sites want only the web proxy to have external access, too.  But this is also rather more pieces than a DNS redirect, too.

  • UCCX 8.5.1 SU2 traffic analysis report errors out

    Anyone run into this before, I'm not seeing a bug fixed for this issue in SU3 either.
    If we have a call center outage or some issue effecting services, one day a month, and try to run the IVR traffic analysis report for the whole month (where one day we had outage) the report for that timeframe fails to run. If we adjust the report begin/end time to end before problem day/hour the report runs fine. Same for after that time to end of the month. We can also run the report for the single day of outage (whole 24 hour period) without problem to which is strange.
    Regarding the outage, it is where UCCX services stop for some reason. This is HA WAN setup. The systems were not powered down or shutdown unexpectedly. 
    Seems it is choking on the data and trying to divde by zero....
    We see this in logs,
    1: 11/6/2012 8:56:32 AM %CHC-LOG_SUBFAC-3-UNK:0 :Final Font Size=$rptFontSize
    1: 12/6/2012 11:20:36 AM %CHC-LOG_SUBFAC-3-UNK:The following SQL Command failed due to ()SQL Command=[call sp_ivr_traffic_analysis ('2012-11-01 5:00:00', '2012-12-01 5:59:59', -18000, 0 )]
    2: 12/6/2012 11:20:36 AM %CHC-LOG_SUBFAC-3-UNK:TraceDBError #1:(ADO Error# -2147467259|Description E22012: (-1202) An attempt was made to divide by zero.|Source Ifxoledbc|SQLState |NativeError -1202)
    3: 12/6/2012 11:20:36 AM %CHC-LOG_SUBFAC-3-UNK:Database Error | A runtime error occurred while executing the query. Please check log for more details
    4: 12/6/2012 11:30:32 AM %CHC-LOG_SUBFAC-3-UNK:Failed to run Interpreted SQL Command(call sp_ivr_traffic_analysis ('2012-11-01 5:00:00', '2012-12-01 5:59:59', -18000, 0 ))
    5: 12/6/2012 11:34:52 AM %CHC-LOG_SUBFAC-3-UNK:The following SQL Command failed due to ()SQL Command=[call sp_ivr_traffic_analysis ('2012-11-01 5:00:00', '2012-12-01 5:59:59', -18000, 0 )]
    6: 12/6/2012 11:34:52 AM %CHC-LOG_SUBFAC-3-UNK:TraceDBError #1:(ADO Error# -2147467259|Description E22012: (-1202) An attempt was made to divide by zero.|Source Ifxoledbc|SQLState |NativeError -1202)
    7: 12/6/2012 11:34:52 AM %CHC-LOG_SUBFAC-3-UNK:Database Error | A runtime error occurred while executing the query. Please check log for more details
    8: 12/6/2012 12:02:53 PM %CHC-LOG_SUBFAC-3-UNK:Failed to run Interpreted SQL Command(call sp_ivr_traffic_analysis ('2012-11-01 5:00:00', '2012-12-01 5:59:59', -18000, 0 ))
    9: 12/6/2012 4:00:13 PM %CHC-LOG_SUBFAC-3-UNK:The following SQL Command failed due to ()SQL Command=[call sp_ivr_traffic_analysis ('2012-11-01 5:00:00', '2012-12-01 5:59:59', -18000, 0 )]
    10: 12/6/2012 4:00:13 PM %CHC-LOG_SUBFAC-3-UNK:TraceDBError #1:(ADO Error# -2147467259|Description E22012: (-1202) An attempt was made to divide by zero.|Source Ifxoledbc|SQLState |NativeError -1202)
    11: 12/6/2012 4:00:13 PM %CHC-LOG_SUBFAC-3-UNK:Database Error | A runtime error occurred while executing the query. Please check log for more details
    12: 12/6/2012 4:18:56 PM %CHC-LOG_SUBFAC-3-UNK:Failed to run Interpreted SQL Command(call sp_ivr_traffic_analysis ('2012-11-01 5:00:00', '2012-12-01 5:59:59', -18000, 0 ))

    Mohammed,
    It is common, in many of the Cisco Express 8.5 environments we have looked at, for the Total Incoming Calls given on a Traffic Analysis report to be a higher number than an Application Report.
    The Traffic Analysis Report counts every unique sessionID (unique call) that is inbound (contact type of 1).  The Application Reports do a similar thing but qualify (filter) only the records that have an application assigned.
    There are simply times where inbound calls have been directed to an "agent" without having an applicaiton assigned.
    The best thing the reporting user can do is to run a query on his or her database such as: 
         select * from ContactCallDetail where contactType=1and startDateTime > '2012-11-16 10:00:00' and startDateTime < '2012-11-16 11:00:00';
    Usually when an application is not assigned to the record in the ContactCallDetail table it is because the destination type is equal to 1, which is an 'Agent' instead of a 'route point'.
    So if you modify your select statement to filter by destinationType, you can quickly find the records that don't have the application assigned. 
    Example:  select * from ContactCallDetail where contactType = 1 and destinationType = 1 and startDateTime > '2012-11-16 10:00:00 and startDateTime < 2012-11-16 11:00:00';
    When you look at these records, you will see the agent that took the call from the destinationID field.  The number in that field should match up with the field called 'resourceID' in a table called 'resouce';
         Example:  select * from resource where resouce=6011; where 6011 was the number you found in the destinationID field.
    If there is still confusion about the source of the call - then talk to that agent and find out what is was.
    Good Luck and let me know if you need further help.
    Ron Reif
    [email protected]

  • UCCX 8.5 - Historical Reports - Traffic Analysis report and Application Performance Analysis report different calls presented

    Hi,
    Please Advice.
    When I compare Traffic Analysis report and Application report, Calls presented are not same. Please Help !
    Also attached herwith the reports

    Mohammed,
    It is common, in many of the Cisco Express 8.5 environments we have looked at, for the Total Incoming Calls given on a Traffic Analysis report to be a higher number than an Application Report.
    The Traffic Analysis Report counts every unique sessionID (unique call) that is inbound (contact type of 1).  The Application Reports do a similar thing but qualify (filter) only the records that have an application assigned.
    There are simply times where inbound calls have been directed to an "agent" without having an applicaiton assigned.
    The best thing the reporting user can do is to run a query on his or her database such as: 
         select * from ContactCallDetail where contactType=1and startDateTime > '2012-11-16 10:00:00' and startDateTime < '2012-11-16 11:00:00';
    Usually when an application is not assigned to the record in the ContactCallDetail table it is because the destination type is equal to 1, which is an 'Agent' instead of a 'route point'.
    So if you modify your select statement to filter by destinationType, you can quickly find the records that don't have the application assigned. 
    Example:  select * from ContactCallDetail where contactType = 1 and destinationType = 1 and startDateTime > '2012-11-16 10:00:00 and startDateTime < 2012-11-16 11:00:00';
    When you look at these records, you will see the agent that took the call from the destinationID field.  The number in that field should match up with the field called 'resourceID' in a table called 'resouce';
         Example:  select * from resource where resouce=6011; where 6011 was the number you found in the destinationID field.
    If there is still confusion about the source of the call - then talk to that agent and find out what is was.
    Good Luck and let me know if you need further help.
    Ron Reif
    [email protected]

  • How to get polipo proxy to transparently handle web traffic?

    hello there,
    I've got a router PC at home. It runs privoxy so that any PC on my local network can browse the Internet in a reasonably secure way, with no ads and such.
    Because we often visit the same websites, I thought that's be a good thing to set up a caching proxy. I tried Squid, but found it difficult to configure, slow to start, etc. so I finally chose polipo, which is much lighter and simpler.
    On the web, many sources advise to have to following setup:
    1) local -- privoxy -- polipo -- internet
    I got such a setup, but I'd like to try the following instead:
    2) local -- polipo -- privoxy -- internet
    In my opinion it's more relevant because:
    - my router is quite old, and I think it would be lighter on resources to serve already privoxied cached pages, rather than having privoxy process every cached page
    - in terms of privacy, it's generally advised not to have a parent proxy on top of privoxy
    Privoxy acts as an intercepting proxy, so setup 1) was quite easy to configure. Web traffic is redirected to privoxy, then privoxy forwards it to polipo.
    Polipo does not act as an intercepting proxy, because its developer considers that "interception proxying is a fundamentally broken design [...], and will not be supported by Polipo". So far, the only possible workaround I found are :
    - configure browsers to use polipo: not suitable, I want any local network computer to be able to transparently connect to the internet
    - use yet another proxy to intercept traffic...
    - or, from polipo docs :
    If you want to use interception proxying in order to avoid manually configuring your clients, please use Netscape's proxy.pac auto-configuration (you don't need a separate web server, as a proxy.pac file can be served by Polipo's internal server).
    It gives link pointing to http://wp.netscape.com/eng/mozilla/2.0/ … -live.html which is dead.
    So, in short: is there a way to transparently route my web traffic through polipo?
    Thanks for any guidance.

    Not sure if your still looking for a solution, but I could think of a couple possible ways to redirect the traffic. One would be rinetd (Here). The other solution I thought would be iptables (FW_REDIRECT ??), but I have not tried that.
    I might try experimenting with a few ways, but let me know if you have it working..

  • How to generate web traffic report on SharePoint 2013?

    Hello All,
    I am working on Intranet in SharePoint 2013 On Premise.
    There are functionalities like Poll, Survey, Event, Announcements etc.
    Now there is a requirement to create web traffic report for all these functionality. How should I generate web traffic report for all these?
    Thanks in Advance.

    Hi Darsh,
    Here is the out of box analytic reports you can view.  Please refer to the following article.
    SharePoint 2013 Analytics A Big Step Backward
    New Analytics in SharePoint 2013
    Please mark it answered, if your problem resolved or helpful. 

  • How to fix column / row as "header" in WAD (Web item Analysis) ?

    Hi,
    is there a possibility to fix a column or row as "header" in web item analysis? (like freeze panes in excel)
    When scrolling down, the header should always be displayed.
    Thank you very much in advance, best regards
    Frank

    We did a custom proof of concept on this back in 3.5 using CSS and/or javascript. At that time there was no BW solution for this.
    Don't know if 2004s has this ability or not. Here's a link to an example that shows how it can be done using CSS:
    http://home.tampabay.rr.com/bmerkey/examples/locked-column-csv.html

  • Is there program for precise measuring of web traffic in/out my Mac?

    Some ISPs have their proprietary web traffic/usage indicators   but they are  crude, of no use for precise measurements.
    Widgets are  of no hellp either.
    Is there  a program which can display the internet traffic in/out of a computer at any given moment and display it instantly ?
    Ideally , able to display live (or by manual update) what  the traffic is to/from websites visited , email in/out data flow and creating a log, so I can have a record what exactly the web usage is, for example, for last 1 hour/ 1day/1 week.
    Is there such a program?
    Thanks in advance

    I've been using SurplusMeter waiting for AT&T U-verse to get their usage meter going (3 months of waiting) due to the caps they (supposedly) imposed on May 2, 2011.  They still haven't gotten their meter working and it's not clear the caps are being imposed (250 GB/month).  But I wanted to get a idea of how much I was using so I decided on SurplusMeter. 
    SurplusMeter has a number of nice features.  But without any other measurement tool to cooralate it with I have no idea how accurate it is. One thing I do know howerver is that in the case of U-verse, where all traffic goes through a U-verse provided router (they call it the "resident gateway") I can only measue the traffic in and out of my computer, not in and out of the router (no, there no separate info in the router to give me this info or I wouldn't have needed SurplusMeter).
    FWIW, there are other utilities that can give you some of this info or present it in different ways.  Here's a few others I looked at before choosing SurplusMeter:
    Net Monitor
    ProteMac Meter
    TraffiX
    UsageTracker

  • Traffic analysis report by team / CSQ

    Hi Everybody, 
    Is it possible to show the Traffic analysis report by team / CSQ?
    Because I cannot find any param or filter in this report type.
    Or I have to use other report type?
    Thanks in advance
    Sam

    Hi Sam
    It's possible, certainly - however it would involve creating a custom version of the report.
    This would include:
    - Developing a customised SQL stored procedure to generate the statistics
    - Creating a new Crystal Reports template (for HRC) or CUIC Template for the report in CUIC Premium, and exporting that to UCCX.
    Do you have suitable skills in house or a Cisco Partner you can use for this sort of work?
    Aaron

  • Web Item Analysis Modification Modules

    Samples provided by SAP for Web Item Analysis Modification are
    4) Negative Number module (com.sap.ip.bi.rig.NegativeNumber)
    Depicts negative numbers in a column or entire table in red.
    Hi SDN Community,
    I have recently been exposed to Web Interface in BI7, (having previously worked in BW35 on Table Interface Class)
    How do we ensure that the modules are activated as per the SAP documentaiton.
    Are there transactions/documentation available?
    Finally, once I get past this point, i found a document on the web that explains how to use one of these Exception modules,
    In the case of the negative number module, do you know if the numbers are displayed in red font when negative, (and in the same column)
    Thank you.
    Simon

    Part success!
    I used this module, and sure enough, the negative colours are red.  It must have been already active.
    Now, to change the sign, to positive...  is there a standard module, or will this require some ABAP or java coding.
    for example, do i require to do this?
    ABAP Class for the Custom Extension Web Item 
    Thank you.
    Simon

  • Web Item Analysis Moodule in BI7 - How to Activate

    Samples provided by SAP for Web Item Analysis Modification are
    4) Negative Number module (com.sap.ip.bi.rig.NegativeNumber)
    Depicts negative numbers in a column or entire table in red.
    Hi SDN Community,
    I have recently been exposed to Web Interface in BI7, (having previously worked in BW35 on Table Interface Class)
    How do we ensure that the modules are activated as per the SAP documentaiton.
    Are there transactions/documentation available?
    Finally, once I get past this point, i found a document on the web that explains how to use one of these Exception modules,
    In the case of the negative number module, do you know if the numbers are displayed in red font when negative, (and in the same column)
    Thank you.
    Simon

    It seems that you simply use the RIG module in the web template, and save.
    This essentially activates it.

  • LabVIEW programmer for Sound Measurement & Analysis software

    Listen, Inc. is the market leader in PC based electro-acoustic test and measurement systems for testing loudspeakers, microphones, telephones, audio electronics, hearing aids and other transducers. We have been in business for over 10 years and our continued growth has created an opportunity for a LabVIEW programmer to join our programming team.
    This position reports to the Software Manager. Duties include, but are not limited to:
    • Designing and coding new Sound Measurement and Analysis software
    • Improving, reviewing and de-bugging existing code
    • Preparing internal and user technical documentation
    • Testing code
    • Interfacing with management, sales teams and customers to define tasks
    Required skills / education
    • Strong background (3+ years) in large-scale LabVIEW programming
    • Bachelor’s degree (Masters preferred) in engineering, computer science or similar subject
    • A methodical, user interface-intensive approach to coding, testing and documentation
    • Competency in Visual Studio, .NET and database programs is an advantage
    • The ability to work to tight deadlines
    • The ability to work well in a small team. A willingness to challenge and discuss your own and other people’s ideas.
    • Previous experience or an interest in acoustics or sound and vibration engineering is an advantage.
    • Minimum 2+ years in a similar technical position (5+ years preferred).
    Listen is a small, dynamic, and growing company, located in Boston’s historic South End. We offer all the benefits of a small company, combined with the security and stability of a software company that has been in business for over 10 years and sells to most of the world’s major loudspeaker manufacturers. Our customer list includes many of the world’s major loudspeaker and telecommunications manufacturers. Please visit our website, www.Listeninc.com, for more information about our products and markets.
    Benefits include a competitive salary, healthcare, paid vacation and a retirement plan.
    Applicants must have authorization to work in the US. We are unable to assist with visa / work permit applications.
    To be considered for this position, please send resumé and cover letter explaining why you are the ideal candidate for this job (in Word or PDF format only) to [email protected]. Please use the subject title Labview Programmer Position (NI Board).

    Are you open to consultants? I'm currently in Northern NJ and I could work on-site in Boston, MA 3 days a week / 30-35 hrs a week. I have a BSEE, I'm a US Citizen with an Active Secret Clearance. I have over 10 years of experience with LabVIEW and 5 years of experience with TestStand. I'm also very comfortable working with Test and Measurements Instruments.

  • Web query analysis: analyze_iemon error..

    Hi,
    I am trying to use web query analysis tool and when i am trying produce the .csv file in cmd prompt it is giving me following error message:
    "analyze_iemon" is not recognized as an internal or external cmd, operable program or batch file
    the strange thig is it is creating .csv file but its empty !!!
    can someone guide me in this ??
    i will surely give the points.
    Thank You in advance.
    KS

    Doodle,
    my id is [email protected]
    Thank you for your respond.
    Waiting for your email.
    I will surely come back and will give u points.
    KS

  • Is there any way to log web traffic information of the users with RV082 router ?

    Dear all,
    I just bought a RV082 router. I can't find any way for logging the web traffic of the users.
    Can it be done with the router ?
    Thanks
    Fabio

    Hello,
    If I am not mistaking the best you can do is to send syslog traffic to a server or locally (to a server being preferred) .
    But you are going to see stuff like this:
    30>Aug 3 22:12:40 2005 gw RGFW-OUT: ACCEPT (TCP 192.168.1.111:2101->212.5.219.46:80 on ppp0) [0,0]
    <30>Aug 3 22:12:40 2005 gw RGFW-OUT: ACCEPT (TCP 192.168.1.111:2102->81.0.235.240:80 on ppp0) [0,0]
    <30>Aug 3 22:12:40 2005 gw RGFW-OUT: ACCEPT (TCP 192.168.1.111:2103->81.0.235.251:80 on ppp0) [0,0]
    <30>Aug 3 22:12:41 2005 gw RGFW-OUT: ACCEPT (TCP 192.168.1.111:2104->212.5.219.46:80 on ppp0) [0,0]
    <30>Aug 3 22:12:41 2005 gw RGFW-OUT: ACCEPT (TCP 192.168.1.111:2105->81.0.235.250:80 on ppp0) [0,0]
    <30>Aug 3 22:12:41 2005 gw RGFW-OUT: ACCEPT (TCP 192.168.1.111:2106->212.5.219.46:80 on ppp0) [0,0]
    You will need an external device to make this happen, Having a proxy server such as Squid would do it for you and not just that but will optimize the newtork :)
    Regards,
    Jcarvaja
    CCIE 42930

Maybe you are looking for