Web Uploading question

I want to upload my page to my web site. The box, Put in Subfolder is checked (in this case "Olive General". Will the upload process create a subfolder called "Olive General" in my site or do I need to make the subfolder first (I still use GoLive CS2) upload it to my site then go back to LightRoom and upload my web show?
New to LightRoom, but loving it.
Thanks
ND

Brian,
It is not often one wants to call oneself a dope, but here it is. Ok, you answered my question. So I tried and tried to upload my files but no luck. over and over again, but no luck. then I came to the forum looking for answers. And I came across my own message string. And there was the answer. REMEMBER TO MAKE A WEB SAFE FOLDER, NO SPACES OR OTHER UNACCEPTABLE CHARACTERS. If you hadn't thrown that little bit of info into your response I would still be wasting time.
Thank you again, Brian.
And, REMEMBER TO MAKE A WEB SAFE FOLDER, NO SPACES OR OTHER UNACCEPTABLE CHARACTERS.REMEMBER TO MAKE A WEB SAFE FOLDER, NO SPACES OR OTHER UNACCEPTABLE CHARACTERS.REMEMBER TO MAKE A WEB SAFE FOLDER, NO SPACES OR OTHER UNACCEPTABLE CHARACTERS!!!!!

Similar Messages

  • How do I compress a 2 min FCP video into 100MB for web upload?

    How do I compress a 2 min FCP video into 100MB for web upload?
    I have FCP v.7 as a part of FCStudio
    OK, this may seem like a stupid question for most of you but I haven't used FCP for years.  I am trying to make and upload a 2 min video to the web and don't know how to turn it into a size of 100MB or less.
    Yes, I realize that I have Compressor but it does not work on my computer for some reason.  I think my laptop is too old for it or something.
    It needs to be in one of these formats and I would like to use the highest quality.  Suggestions needed for this also since this will be my first attempt at an uploaded video.
    .MOV, .WMV, .AVI, .MPG, .3GP, 3G2, .QTL, OR .MP4
    Any help would be wonderful!
    MacBook Pro, OS X Mountain Lion (10.8.3), 750GB HD, 2.2 GHz, 6 GB RAM

    First, let me apologize for the way we were chatting on your thread while waiting.
    Let me summerize what I think we have here:
    1. You have a 2 minute show you want to convert to some codec appropriate for high quality presentation, but under 100MB final filesize.
    2. You feel you don't want to use Compressor or a preset for YouTube.
    3. You're in a hurry.
    The fastest and highest quality method of making this conversion is using Compressor. It is designed to do precisely what you ask. The codec you want is H.264.
    The YouTube preset is being suggested not because we think you're going to upload the clip to that site, but because the YouTube preset is a remarkably easy way to get a HQ H.264 clip with acceptable filesize. I'm staring at a 3:40 clip of 1080p that would knock your socks off and it's 90MB!
    Even on a laptop the conversion is a matter of minutes.
    If you're OK with my arguement, I'll write out a step-by-step proc for you and you can be done with this in time for that primetime show you want to watch.  OK?

  • Web upload via ImageMixer 3 Launcher

    I have a canon vixia hf m301. I could not  to do web upload via ImageMixer 3 Launcher. Windows XP explorer could see sd card but the software could not see it. What to do next?
    Thank,
    cherngchai

    Hi Cherngchai,
    For the best answer, I recommend calling Pixela for assistance.  Here's their contact information:
    Telephone support: 1-800-458-4029 Monday-Friday 9:00 a.m. - 6:00 p.m. (PST)
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • BT Cloud - creating folders within the Web uploads...

    On the Help pages the question, "Can I upload a folder or multiple files to the BT Cloud Web Client" is answered by explaining how to upload multiple files and then says you can create a new folder within the Web uploads folder to store them. Unfortunately it does not explain how to create the said folder - and as yet I have not been able to. Help please.
    Solved!
    Go to Solution.

    This is an old thread, but still relevant to my current issue.
    I've just joined BT and have activated the BT Cloud. I've tried to create a folder by clicking on the three little dots, but it's disabled. I uploaded a file and then it became enabled. Clicking on it though only allowed me to move it to trash. I moved it to trash and the 3 little dots became disabled again.
    How do I enable this to create a folder? Surely it can't be that hard!!
    Cheers,
    Graham

  • BT Cloud Web Uploads not working

    Does anyone have a problem uploading any files to BT Cloud BT Cloud using web uploads? It tried to upload and then says upload failed with a red exclamation mark. Tried a few different ways and on a PC and l;aptop no joy?
    Any thoughts?
    Thanks
    Charles

    have you read the cloud helpfiles as these appear to have been updated and explain how to web upload
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • LR 3.2 - Web upload issue/problem

    Good news is that I am not getting error message like other posts in my search. Bad news - it is not doing it right. NOTE: this is my first attempt using web upload, so there is some user tial and error.
    First attempt, didn't know if would create html page in process. Upload went fime, no errors, but when went to site, "page doesn't exist" error. Manually created a blank html page matching name used in LR, updated site, and reuploaded the web gallery from LR. Afterwards, went to site and same "page doesen't exist" error message.
    Went to Dreamhost and logged into my account, and further loggd in to FTP (and a graphic webFTP version). Didn't see anything anything resembling an upload on the text FTP. On the webFTP version I saw a third directory was created - named my LR file name - and inside the directory folder it had all the all the photos and other files from the LR upload plus the html page I created. I'm wondering what I am doing wrong as LR is successfully logging on and uploading, but placing where not readable.
    I have a similar question on the Dreamhost forum site, however, when a keyword search over there returned zero hits on "Lightroom" as a similar search over here returned zero hits on "Dreamhost." Figured it was best to ask in both places.

    RESOLVED...
    Now this is embarrasing as I found the solution through trial and error. I was doing everything right except for two words -"Case Sensitive." The uploaded file and directory the upload created was "Area43Contest" yet when typing out the file path to view after upload, I naturally type all lower case and received the page doesn't exist error.
    On the FTP viewer issue at my host: the text version appears to update overnight as the directory was not there yesterday but was there this AM. The "webFTP" version appears to be realtime which is why I could see on one and not the other yesterday.
    Understanding Lightroom web upload: Assuming that you keep the default "use subfolder" checked, it is self-contained in the directory that it creates so the typed path ends in the directory name rather than a file name. Thati s why it doesn't create a page outside the directory. It launches full screen as previewed in Lightroom absent the other parts of the web site, like headers - which is exactly what I wanted.  Essentially a hidden page where I can deliver a product by giving a link.This was an HTML template where recipients can rt click and download the photos rather than the available flash templates which have the advantage of self running slideshow rather than download. While not necessary 99% of the time, may want to create a custom template with at least "Home" link as the only obvious way to return to the web site is back out the address to .com.
    Hope others don't have to go through what I went through, but felt with the numbers that viewed this post in 24 hours and apparently stumped as no suggestions, that I had to let you know.

  • Best setting for personal web upload

    Hi all,
    I'm trying to export a video for my personal web upload.
    I exported a clip of H.264, Middium Quality, Size-below 640xXXX in 16:9 mode. File size about 16MB & bad quality at last!
    What's your suggestion setting either via FCP or Compressor for export?
    Better quality & better file size ;)
    Thanks!!

    For each of these select File>Export>Using QT Conversion and in the window thst opens change the "Use" to Broadband High or Medium from the dropdown menu.
    As these are for 4:3 you will have to click the Options button and change "Size" to Custom and type in one of the sizes mentioned earlier.
    Then open the Settings window and under Data Rate select "Restrict to 750kbps or 300kbps" according to the size you are using.

  • BEx Variable in Webi Report questions

    Hi Gurus,
    Here is my issue.
    I created a BEx Query 0SD_C03 Cube with following fields
    Two Columns
    One Key Figure:                   Subtotal1
    One Restricted Key Figure:  Subtotal with restriction " Sales Organization 1000"
    Two Rows                             Plant, Sales Organization
    One Variable with Sales Organization.
    When I ran this query in BEx Analyzer I can see all Sales Organization values in prompt list, How ever when I created a Universe and ran a webi query I can see 1000 in the Sales Organization list.
    Is this because I have restricted Key Figure with Sales Organization 1000 in the query?
    I removed my Restricted Key Figure from my query and tried again this time I see some 10 Sales Oraganizations but I didn't see all available Sales Organizations. Does BO Universe LOVs restricte the list?
    Thanks
    Sasi

    Identical entry so this is being closed:
    duplicate:
    BEx Variable in Webi Report questions
    Ingo

  • Scp/ssh support for web upload

    I prefer not to pass my credentials in the clear. Please offer a way to support other well-known protocols like scp in the web upload module.

    I completely agree -- there are excellent low level API's available for support *much* *safer* and *better* data transfer options than just FTP - I personally want sftp/scp. WebDAV (over SSL in particular) is the other no-brainer as far as I'm concerned.
    Yes, you can save the gallery to your local disk, go out and upload, but for a tool that's all about work-flow, this seems really annoying, and given that making a dialog box that allows you to set what protocol and the various options that protocol may require is now a standard practice, it's not like it smacks of the Dreaded Creeping Featurism, IMHO.

  • Aperture to Picasa Web upload?

    I am looking for a way to upload pics from my Aperture library to picasa web. Apparently there used to a plug-in for this developed by ubermind, but that seems to have been discontinued.
    Anyway, its not too difficult to upload the pics alone - I am able to do so using the picasa web uploader and selecting the relevant aperture project or album that i want to upload from the "Media" section of the Finder "Browse for file" window.
    However, only the pics get transferred this way and not face tags or photo descriptions. Is there a better way of  achieveing this? any suggestions much appreciated.

    I still found the Aperture Picasa plug-in this morning on a softpedia mirror site: http://mac.softpedia.com/progDownload/Aperture-Picasa-Plugin-Download-50358.htm l; try External mirror 2 r30, but hurry!

  • Web security question

    I have just completed a beautiful Lightroom 2 web gallery that is ready to be uploaded. I am uneasy about sending several hundred commercial photos I am marketing to the web without any copy protection. Is this a real concern and is there anything I can do within Lightroom to stop the economic loss from copying these photos? I have the same question about exporting slide shows from Lightroom via pdf. Thanks jc

    There is very little - dare I say no -- protection with the default galleries found in Lr. Even Flash is easily circumvented.
    Some protection would be offered by applying a copyright notice over the image and only uploading small images to web.
    Best protection? Nothing goes on the web.

  • File/Photo Web Upload Control?

    Newbie question here, is there some setting I've boffo'd that's preventing me from using upload controls on the web, or is this a natural occurrence?

    I think that you can only do it via apps - so for the sites that you want to upload to you'll need to check to see if they've got apps in the App Store e.g. there are apps for Facebook (http://itunes.apple.com/gb/app/facebook/id284882215?mt=8), Flickr (http://itunes.apple.com/us/app/flickr/id328407587?mt=8), etc

  • Just purchased & web upload is not working

    I just purchased this and every time I try to upload a pdf using the web interface, it says there was an error uploading the file with no additional explanation.
    What's going on?  I'd like my money back if this program isn't working today.
    Jen

    Hi Jen,
    Please try the steps outlined here: http://forums.adobe.com/docs/DOC-1831
    Let us know how it goes!
    -David

  • Few Hyperion Web Analysis questions

    Hi All,
    We are using Web Analysis 11.1.2 and i am a newbie to it. I have few questions regarding reports which may be of very basic level;
    Q1. If we right click on a report then we have an option of "Edit data" through which we can enter data directly into planning. My question is that how can i disable this option for all users as i don't want them to manipulate any data through a report?
    Q2. As we have made a report in which we have used the dimension members that are used in Hyperion planning. The name of member in Hyperion planning for example is ABC and i want to change the name to XYZ in Hyperion Web analysis report. How is that possible?
    Thanks in advance.
    Regards,

    Q1 depends on the level of provisioning and or useraccess permissions on essbase/olap level.
    Use Shared Services in combination with EAConsole to restrict this.
    Q@. In plain/ native essbase you can add aliases to the member. Normally you do not edit planning members in essbase (since you have to change them in planning it self) But perhaps you can. You can give it a try in a testenvironment.

  • Multiple Image Uploading Question

    Please forgive my ignorance here but I saw the question on multiple image uploading and this is something i have been trying to do for a few days now without any success.
    I am using CS3 with ADDT and PHP
    I want to allow my users to be able to upload say 5 pictures at a time, each user has multiple photo albums the names of which are stored in mysql table, the image name is stored in a different table with a reference to the album id.
    So, I assume that i put an insert record on the page, I followed the usual process used to have a single image upload and thought it would give me or add the extra file field options on the form when telling the multi upload to allow 5 images to be uploaded, not the case. Do i have to create a form on the page first with 5 file fields or am i just missing the plot here.
    Sorry if this is just something that seems simple but i just don't seem to be able to get it to work at all. I have no working example to look over and have serach google to see if there are any tutorials for doing this but can't find any at all.
    Thank you in advance of any help and guidance given
    Regards
    Ray

    Hi Günter
    Thank you for your reply and also for the great tutorial site you run which has helped me quite a lot with several things.
    ok, so i am maybe a little confused here, so what is the multiple image uploader for if not for uploading multiple images, and how does it give you the option to select more than one file or is it that you can't use it when inserting the image file into a database?
    Please forgive my ignornace again, i can see when i have tried using the multiple image upload thatit puts a text link called upload, what is that for because it doesn't seem to do anything on the page i have tried it on?
    Kind Regards
    Ray

Maybe you are looking for