Web Url Monitoring internal/external network

We know that SCOM 2007 R2 can monitor the web url's.  Does it monitor the weburl with in the internal network and also from external network.  is it possible to monitor the same internal website which is confiured to use out side the network(external)
from scom 2007 R2.  how to find which url is internal and which is external.

 Please confirm that SCOM 2007 R2 having the capability to monitor a weburl from internal network and also from external network(internet).
I have configured the web url monitoring using the web application template…which I am sure that is monitoring the weburl internally(with in the network). 
For the same weburl is configured to  access from external network (internet). I need to monitor the same url
which is accessing from internet.  If internet users are not able to access the weburl we need an alert from scom 2007 R2.
i googled for this answer and no luck.
Is there any different monitors available with scom to monitor weburl for both internal and external network

Similar Messages

  • Lync Discover Internal & External Web URL

    we have Lync 2013 standard deployment with one front end & Edge server role. we have use our firewall as a reverse proxy by natting live IP with Frontend server.
    now we have deployed same web URL for internal and external access that is lync.domain.com. Now we are not able to access lync discover from mobile client who is connecting from internal.
    Please find herewith the result of Lync Connectivity Analyser :
    Total server discovery time: 0.1 seconds
    Server discovery succeeded for unsecure (HTTP) internal channel against URL http://lyncdiscoverinternal.domain.com/
    Starting automatic discovery for secure (HTTPS) external channel
    An error occurred while sending the request.
    Unable to connect to the remote server
    A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond X.X.X.X(external IP):443
    For troubleshooting, try using a browser to open the server discovery URL https://lyncdiscover.domain.com/[email protected]
    Server discovery failed for secured external channel against https://lyncdiscover.domain.com/
    Starting automatic discovery for unsecure (HTTP) external channel
    An error occurred while sending the request.
    Unable to connect to the remote server
    A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond X.X.X.X(external IP):80
    For troubleshooting, try using a browser to open the server discovery URL http://lyncdiscover.domain.com/[email protected]
    Server discovery failed for unsecured external channel against http://lyncdiscover.domain.com/
    Automatic discovery meant for external network access failed. Please verify the server requirements at http://go.microsoft.com/fwlink/?LinkId=278998 .
    Automatic discovery meant for internal network access succeeded from an external network which could be a potential security concern.
    Kindly let me know , how we can use same web URL for external and internal access of lyncdiscover in 2013 version.

    You can refer below link to help you in your issue
    http://blogs.technet.com/b/nexthop/archive/2012/04/25/lync-server-2010-mobility-deep-dive-autodiscover-service.aspx
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
    Mai Ali | My blogs: Technical

  • How to find the WebUrl alert was raised for external network

    I have two weburl's requestes to monitor under SCOM2007 R2
    url one:  https://www.asdftest.com
    url two:  https://www.lkjhtest.com
    "url one" is configured to access the weburl from internal network and external network(internet) as well.
    "url two" is not configured to access from external network(internet). only configured for for internal network.
    I have configured for scom monitoring for the above two urls using the SCOM 2007 R2 web application template. After configuration i have not received any alert from the "Url Two"
    Q1). I am expecting an alert for "Url two" because it is not configured for external network access. 
    why i was not received any alert for that.
    Q2). How to find an web Url alert is raised for internal network or external network. SCOM Tool is not asked me to specify that the weburl is is from internal/external network access.
    Q3). Particularly how to find the Url alert was raised for external network
    please suggest me and correct me if i am wrong. 
    Thanks in advance.

    Hi,
    Please refer to your another thread:
    http://social.technet.microsoft.com/Forums/en-US/10d32ff3-d1a5-4875-b1ad-bb01a5799a33/web-url-monitoring-internalexternal-network?forum=operationsmana
    Regards,
    Yan Li
    Regards, Yan Li

  • Routing issue with dual Ethernet NICs - Internal/External Configuration under Windows 8.1 - what am I doing wrong ?

    I have a PC hosting Windows 8.1, attached to two Networks. One leads to the internet - and uses the private IP address (172.*)  the other is purely internal (also using the private address 198.*) but,  has no internet connectivity.  I'm finding
    that if I don't disable my internal NIC, I can't access any internet sites. Is this a bug, or have I not done something correctly.
    I have also, a Windows 7 PC, attached to the same Networks, and it exhibits no issues when connecting to either the internet or to internal locations.
    (Both are Enterprise builds, though only across a Windows for Workgroups network).
    Can anyone tell me what I need to be doing with Windows 8.1 please, to make both internal & external network connectivity work as is the case with Windows 7 ?
    I'm only running IPv4, and both Wired Networks have at their respective ends, Routers that support DHCP & NAT. Though the internal Router's external port is not connected to anything.
    Thanks in advance...

    Hi,
    Can you tell me what you have tried so far and how did you set?
    Firstly please update all network adapter driver.
    After that, do the following:
    1. Open the Command Prompt (Admin).
    2. Run "Ipconfig /all" to check your nics IP information.
    3. Use route command tell the computer which interface you want the packets to leave from.
    Assuming Network A is...
    10.10.11.0 /24
    Router is 10.10.10.1
    and Network B is...
    10.10.12.0 /24
    Router is 10.10.10.2
    then use this command:
    route add 10.10.11.0 mask 255.255.255.0 10.10.10.1 -p
    route add 10.10.12.0 mask 255.255.255.0 10.10.10.2 -p
    Hope this helps.
    Karen Hu
    TechNet Community Support

  • PS ; Network Activities (Internal & external) monitoring or evaluation

    Hi
    Can any one guide me how to  pull out a std report for viewing the dates maintained in Activities (Internal & external) in Network, planned dates vs actual dates of confirmation of activities.
    Pl help
    Srihari

    Hi Shrihari,
    U can use CN41N to get dates maintained in Activities (Internal & external) in Network, planned dates vs actual dates of confirmation of activities.
    Thanks & Regards,
    Jatinder Bansal

  • Lync internal / external web services FQDN

    I have a Standard edition 2013 FE server
    Should my internal/external web services url in DNS point to my FE internal IP or my Reverse proxy public IP?
    For mobility it says it should point to the external IP but for address book updates etc surely I want my internal windows clients using the FE pool directly?
    I am unable to differ them on 2013 standard edition...
    ***Don't forget to mark helpful or answer***

    The external web services works in conjunction with a reverse proxy in the perimeter network. It provides clients external access to by using these web services. The FQDNs configured here are sent to clients when they log on, and are used to make an HTTPS
    connection back to the reverse proxy when connecting remotely. The reverse-proxy server forwards the external web service FQDN to an internal hardware load balancer, or directly to the pool. The reverse proxy must be able to resolve the external web services
    FQDN to the IP address of the internal Web server. The external web services FDQN must be resolvable in the public Internet.
    If your internal server is a Standard Edition server, the internal FQDN is the Standard Edition server FQDN. If your internal server is a Front End pool, the FQDN is a hardware load balancer virtual IP (VIP) that load balances the internal web farm servers.
    A hardware load balancer is required in a Front End pool with more than one Enterprise Edition server. A load balancer is not required for a Standard Edition server or a single Enterprise Edition Front End Server.
    For DNS configuration, you can refer below link
    http://expertslab.wordpress.com/2014/04/09/dns-requirements-for-mobility/
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
    Mai Ali | My blog: Technical

  • Single URL for internal and external CRM access when using IFD

    Hello,
    At one of our client site I have setup IFD on CRM 2011. This IFD is behind TMG. My client is a big corporation therefore all CRM components including CRM, ADFS and SQL are on separate servers.
    I have configured IFD using single url https://orgname.contoso.com Their IT staff wants to know why can't they use single URL for internal and external access where internal users are nto prompted for authentication
    when logging on to the CRM server. I know you can do URL re-write in ADFS but they want to know the reason "why internal users can't use the same IFD URL and don't get prompted for their credentials". Text below is from their IT staff.

    There are several approaches to your question.  You need to set up both an internal and an external relying party trust. If you use the external URL, it will always direct you to the signin page, if you use the internal URL, it will resolve you single
    sign on.
    I've configured IFD for CRM multiple times, and this is how it works. CRM looks at the URL. If you use the external URL (org.domain.com), it will prompt for credentials. So what you are asking for, a single URL that works single sign on internally and prompts
    externally really isn't possible.
    What I recommend is:
    1. make the external URL available internally
    2. Configure all outlook clients against the external URL, that way you won't have to reconfigure when someone goes internal to external
    3. Have users who are primarily internal use the internal URL for the web client, which will resolve single sign on
    4. Have users who are primarily external use the external URL for the web client
    For #1, since you only need to enter the credentials when you first configure CRM, it is in all effects single sign on.
    One thing I haven't tried that may work is using IIS redirect internally to redirect the external URL to the internal URL. There is also a powershell script in the IFD guide that you can use to make the outlook client switch between the internal and external
    URL's, but nothing that will give you a single URL that works as the internal relying party trust when internal and the external relying party trust when you are external.

  • How to take Auto backup from External Network Drive to Mac pro internal Dri

    Hi,
    I have a External Network Drive (Buffalo 1TB) which i use as a server, now i need to take auto backup from that external drive to the Mac i am working on, which has 2TB Internal hard Disk.
    Please could anyone help me on this.....
    Thanks in advance

    If you are looking to actually integrate what you have on the external one terabyte hard drive with the 2 TB hard drive you're using inside the Mac the best move for you if you want access to that data when using the Mac Pro server is going into utilities click on the top bar where it says go fall that down to the utilities told them that folder quickly once you are there you will see migration assistant click on that you will be asked to type your admin password to that. It will ask you "how do you want to transfer your information" then select from a Time machine backup or other disk when it asks you will be transferring information to your Mac Pro from your 1 Tb backup external hard drive once it's finished eject the drive or reformat it and use it again if your objective was to infect keep compress the data on the external so you have more space but do not have access to it I strongly recommend Carbon Copy Clone 3.3.1 is 100% free and does a fantastic job here is the link http://www.pure-mac.com/downloads/carboncopyclonerdl.html of copying every block to create an exact replica of your source hard drive. If you want something different and don't mind paying SuperDuper! is a great product as well this WebSite will have many options I would stick to carbon copy clone http://www.pure-mac.com/backup.html I also like EMC Retrospect backup and recovery software for the Mac it is a great product but very much on the expensive side for backup utilities although if you need word offers this might be right up your alley.
    I hope I wasn't help,
    Sincerely,
    Thomas

  • Changing Internal & External URLs?

    We run split DNS so right now for all services the internal and external Exchange 2010 URLs are simply set to mail.domain1.com.
    If I change them to mail.domain2.net, assuming there is a valid cert on the Exchange box for mail.domain2.net, and assuming that split DNS points mail.domain2.net to the internal/external IP of the Exchange box, new clients should pick up the new domain.
    What happens to existing clients i.e. Outlook and ActiveSync?
    Will they continue to use mail.domain1.com until the account is removed and added again, or do they do a periodic refresh/update/poll of which setting to use?
    In particular would the URL used by Outlook Anywhere be updated on the client automatically?
    This topic first appeared in the Spiceworks Community

    Hi,
    For the migration from the Exchange 2007 to Exchange 2013, we need change the external URLs with the new Exchange 2007 host name legacy.domain.com and migrate all mailboxes including public folders.
    For more information about the migration, you can refer to the following articles:
    http://blogs.technet.com/b/meamcs/archive/2013/07/25/part-3-step-by-step-exchange-2007-to-2013-migration.aspx
    http://blogs.technet.com/b/meamcs/archive/2013/07/25/part-4-step-by-step-exchange-2007-to-2013-migration.aspx
    If you have any question, please feel free to let me know.
    Thanks,
    Angela Shi
    TechNet Community Support

  • Monitoring Exchange 2010 from external network

    I would like to monitoring the following services pf Exchange 2010 from external network / internet
    1) SMTP (To confirm the mail has been accepted for delivery)
    2) ActiveSynch (Mobile device can login and synch different folders)
    3) WebApp (Users can log and access mail)
    I have created a script using test-Mailflow, test-activesynchconnectivity and Test-WebServicesConnectivity and running it on server from LAN. I want to monitor the above 3 areas from Internet(external network) to make sure these services are available
    from Internet.
    We have Barracuda as SMTP gateway, TMG for WebApp and MobileIron for ActiveSynch.
    Will i be able to monitor these services from external network(internet) using test commands. What are the alternate ways to monitor the above services from external network.
    Thanks

    We are trying to build exactly similar to ExRCA. ExRCA is good but it is manual. We would like to build something similar to ExRCA which can monitor exchange services periodically and send alerts.

  • SCOM 2012 R2 - How to create a Web Application Monitor for an URL requiring certificate authentication

    Hi All,
    It looks like in SCOM 2012 there are two ways to monitor a web application (URL monitoring):
    Way no 1: (Using the Web Application Transaction Monitoring template)
    Way no 2: (Using the Web
    Application Availability Monitoring template)
    We have created some monitors using
    Web Application Availability Monitoring to check if URL is up without any authentication method.
    However, we have few URLs for which we need Client Certificates to be used for accessing them but found no option in SCOM 2012 to configured the certificates. 
    I have searched a lot on the Tech Net library but no clue.  Does anyone know how to successfully monitor an URL requiring certificate authentication on SCOM 2012 ? or, at least, using no matter which method?
    Thanks.
    Regards,
    Raju.

    Hi,
    Based on my research, it is not possible by using the built-in monitoring templates. Both of them handles “normal”, server-side, SSL-certs, and the transaction monitor handles basic/digest/NTLM authentication, but client certificate based authentication
    is not a configurable option.
    Regards,
    Yan Li
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • MSExchange Monitoring OWAConnectivity External failure

    Hello Sir,
    Could some one help me on the below issue. As we are getting exchange alert from the SCOM Sever more frequently. No error id's in SCOM server as well as in exchange server. The OWA links are opening fine with out any issues for the external users, but still
    getting alert from SCOM.
    In SCOM Server the "CLIENT ACEESS" has RED X.(ERROR)
    Please assist us how to fix the below error.
    Date and Time: 20/02/2015 15:02:32
    Log Name: Script-generated data
    Source: MSExchange Monitoring OWAConnectivity External
    Event Number: 1001
    Level: 1
    Logging Computer: NGss.xxx.local
    User: 
     Description:
    One or more of the Outlook Web App connectivity tests failed. Detailed information: ------------------------------------- Target: NGss.xx.local|BGRP Error: The test received an unexpected response to an Outlook Web App request. URL:  https://owa.exx.xxx.com/owa//
    Details: [15:02:11.758] : The TrustAnySSLCertificate flag was specified, so any certificate will be trusted. [15:02:11.758] : Sending the HTTP GET logon request without credentials for authentication type verification. [15:02:32.758] : The test received an
    unexpected response to an Outlook Web App request. URL:
    / Authentication Method: Mailbox Server: sss.xxx.local Client Access Server Name: sss.xxx.local Scenario: Logon Scenario Description: Sign in to Outlook Web App and verify the response page. User Name: extest_730bfbcde7a04 Performance Counter Name: Logon
    Latency Result: Failure Site: BGRP Latency: -00:00:00.0010000 Secure Access: True ConnectionType: Plaintext Port: 0 Latency (ms): -1 Virtual Directory Name: owa (Default Web Site) URL:
    https://owa.exx.xxx.com/owa/ URL Type: External Error: The test received an unexpected response to an Outlook Web App request. URL:
    / ------------------------------------- Diagnostic command: "Test-OwaConnectivity -TestType:External -MonitoringContext:$true -TrustAnySSLCertificate:$true -LightMode:$true"
    Event Data:
    Date and Time: 20/02/2015 15:02:32
    Property Name Property Value
    Message One or more of the Outlook Web App connectivity tests failed. Detailed information: ------------------------------------- Target: sss.xxx.local|BGRP Error: The test received an unexpected response to an Outlook Web App request. URL:
    https://owa.ss.xxx.com/owa/ Details: [15:02:11.758] : The TrustAnySSLCertificate flag was specified, so any certificate will be trusted. [15:02:11.758] : Sending the HTTP
    GET logon request without credentials for authentication type verification. [15:02:32.758] : The test received an unexpected response to an Outlook Web App request. URL:
    https://owa.ss.xxx.com/owa/ Authentication Method: Mailbox Server: sss.xxx.local Client Access Server Name: sss.xxx.local Scenario: Logon Scenario Description: Sign in to Outlook Web App and verify the response page.
    User Name: extest_730bfbcde7a04 Performance Counter Name: Logon Latency Result: Failure Site: BGRP Latency: -00:00:00.0010000 Secure Access: True ConnectionType: Plaintext Port: 0 Latency (ms): -1 Virtual Directory Name: owa (Default Web Site) URL:
    https://owa.ss.xxx.com/owa/ URL Type: External Error: The test received an unexpected response to an Outlook Web App request. URL:
    https://owa.ss.xxx.com/owa/ ------------------------------------- Diagnostic command: "Test-OwaConnectivity -TestType:External -MonitoringContext:$true -TrustAnySSLCertificate:$true
    -LightMode:$true"
    EventNumber 1001
    EventType 1
    EventSource MSExchange Monitoring OWAConnectivity External
    EventInstanceName 
    LoggingComputer sss.xxx.local
    Thanks in Advance
    Regards,
    Sanjeev Kumar N

    Hi,
    This cmdlet runs against a Mailbox server by using a specific mailbox. Make sure that this mailbox has been created by running the new-TestCasConnectivityUser.ps1 script.
    Please go through the link below for more details:
    Outlook Web App connectivity (Internal) transaction failures
    https://technet.microsoft.com/en-us/library/ff360043(v=exchg.140).aspx
    Regards,
    Yan Li
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • Internal/External Action in Integration Scenario

    Hi,
          What is the simple logic of defining an Action Internal/External in an integration scenario.
    For Instance, A Web application "A" is accessing "PS-EPS"(SAP) system to check the existense of Network.
    What will be the type of Usage at both ends. Why?
    Thanks,
    Debashish Sarkar

    Hi Ajith,
    Yes, you were correct go ahead.
    Refer the below link:
    http://help.sap.com/saphelp_nw70ehp2/helpdata/en/68/88a440df800160e10000000a1550b0/content.htm

  • Source system set up for internal / external access

    Hi all.
    We have an EP 6.0 (NW04 SP16) system delivering BW data from a back-end BW 3.1/3.2 system.  We are using BW Report iViews to deliver all reports to external and internal users.  I am having a very specific problem when setting up the source system for the BW system.
    The BW Report iView object uses the WAS hostname parameter(found under: System Administration -> System Configuration -> Systems -> BWSourceSystem -> Open ->Object -> "Web Application Server (WAS)") when retrieving the back-end BW report. 
    When this parameter is set using an internal host id (internal_host.company.com) internal users can access the report in question, but external users can't.  Alternatively, when this parameter is set using an external host id (ie. the host of our DMZ proxy server) external users can access the report, but internal users can't.
    I need to find a way to use one hostname for this parameter that will work for both internal and external users.  I have worked with the HTTPURLLOC table and this solution works great for URL iViews, but not for BW Report iViews.  Does anyone have any suggestions?  Thanks!

    Hi Shashi.
    We did find a solution using web dispatcher.  We actually installed two instances of web dispatcher... one in our DMZ for external access and another one our corporate LAN.  The web dispatchers are configured identically and the EP instance knows only one hostname:
    name.company.com
    The port passed to the URL https://name.company.com:port is what tells web dispatcher what to do with the request (ie. pass the request to EP, BW, ECC, R/3, etc.).
    Be aware that EP allows for only one hostname for Source System Setup - my name.company.com in my example above -(this is the EP Web Application Server hostname (WAS) parameter found under System Admin - System Config - Systems) - so you may need to do something like we did:
    register name.company.com on the internet as a public address and use that DNS mapping for external users (using your DMZ version of webdispatcher).  Subsequently, use internal DNS or host name mapping to register an internal private addresss for name.company.com (using your LAN version of web dispatcher).  this will allow both internal / external users access to the portal and other SAP back-end systems.
    It may sound a bit kludgy, but believe me - we tried everything to make this work.  I took this all of the way to SAP and this was the recommendation SAP made for allowing both internal and external users access to portal and BW data.
    Hope this helps!

  • Some attachment buttons not working from external networks

    Hi guys,
    We have an eSourcing system that we access internally from server.internal.com . We also make this eSourcing system available to external vendors through www.external.com .
    The external access is done using a Citrix AGEE system (reverse proxy, etc.). As part of this, the AGEE has the ability to change the hostname in the URL so the real server is hidden from external vendors. For example, when eSourcing generates a webpage, the AGEE searches through and replaces all http://server.internal.com references to http://www.external.com , and vice-versa for incoming calls.
    This works for about 95% of the content, but there are a fer places where the links are not re-written correctly. One example is the File Attachment buttons when replying to a question. However, other file attachment buttons work correctly.
    1. Does anyone else have a similar situation, using a Citrix or other product for external vendors?
    2. Does anyone have a similar problem where certain links/buttons are not working from external networks?
    3. Does anyone have any suggestions as to how to fix this problem?
    4. Are there any settings that are specific to external access that may need to be set?
    Thanks guys for any help/insight.
    Michael.

    SAP has re-written some of their code to help rectify the problem. We have also been working with Citrix to provide additional fixes. If anyone else has these problems, apply the latest patch of eSourcing and contact Citrix support to get the AGEE changes needed to make it work.
    Michael

Maybe you are looking for