Web Utility Help!

I've been trying to access the Linksys Web Based Utilty to upgrade my Wireless Router's Firmware (WRT54GS v.2.0) But each time I try, nothing comes up.
I enter the router's default IP Address into my internet browser (192.168.1.1) and then the password request page will come up. I leave the user name blank just as it suggests, and enter "admin" as the default password, then I click OK...Nothing happens except the password request page coming up again. I don't understand why this is happening.
Also, If I hit cancel on the password request page, it will take me to a web-page saying: "401 Unauthorized Authorization required"
I am using IE 6 as my Internet browser. I have already tried connecting to the Web Based Utility on both of my computers and the results are the same...
If you know anything that could help, PLEASE suggest so that I may overcome this problem...Thank you, I appreciate it.

Nevermind, I have figured the problem out myself. Seems I had to manually set a password for the router in the first place...

Similar Messages

Replication of utility/helper classes in JAR/WAR.

Hello folks,
I have recently learned the class loader hierarchy that is employed in
the WebLogic server. Previously, I was including the local component
interfaces of my EJBs in the EJB JAR file as well as the web
application WAR file. However, since the EJB class loader is the
superclass of the WAR class loaders, the WAR class loader can see all
classes in its level as well as the level above it (the EJB class
loader and system class loader). Therefore, I removed the Local
component interfaces from the WAR file, and the system works fine.
However, I have various utility/helper classes that are in the EJB JAR
file as well as the WAR file. Is it safe to remove them from the WAR
file? Is there any need to duplicate classes in the JAR/WAR file if
they are packaged together as an EAR file? Any input is highly
appreciated.
Best regards,
Ryan LeCompte
[email protected]
http://www.louisiana.edu/~rml7669

No, your helper classes will also be visible to the war class loader.
You might also consider packaging your helper classes in a separate jar
file. Then add a manifest class-path entry in your ejb.jar and your
web.war that references the utility jar file(s). This should work on
any J2EE server.
-- Rob
Ryan LeCompte wrote:
Hello folks,
I have recently learned the class loader hierarchy that is employed in
the WebLogic server. Previously, I was including the local component
interfaces of my EJBs in the EJB JAR file as well as the web
application WAR file. However, since the EJB class loader is the
superclass of the WAR class loaders, the WAR class loader can see all
classes in its level as well as the level above it (the EJB class
loader and system class loader). Therefore, I removed the Local
component interfaces from the WAR file, and the system works fine.
However, I have various utility/helper classes that are in the EJB JAR
file as well as the WAR file. Is it safe to remove them from the WAR
file? Is there any need to duplicate classes in the JAR/WAR file if
they are packaged together as an EAR file? Any input is highly
appreciated.
Best regards,
Ryan LeCompte
[email protected]
http://www.louisiana.edu/~rml7669

Wrt110 still cannot access web utility w/o resetting

http://homecommunity.cisco.com/t5/Wireless-Routers/Unable-to-Access-Router-Admin-Page/m-p/293835/hig...
Long existing problem, that IE8 temporarily cleared up (actually only for a day or so).
Router has to be reset to view the on-line web utility. Doesnt matter what version of Windows or IE. With and without A/v and firewall. Tried MANY variables.
This router will not access the Advanced Settings web utility pages no matter what I do, unless it's to power off then back on.
Once I get this problem straightened out I can address the other one: my new netbook cant get on the internet at home with my password. It forces loss of connectivity to the hardwired desktop when I try.
But I really need to know what I'm doing wrong, why I can NEVER get the online admin pages without powering the router off/on.
Please guide me.
Solved!
Go to Solution.

Yes. Hardwired to the router.
Using the "Advanced Settings" on the menu under the router model in the EasyLink Advisor.
Also by typing IN the URL using http and https. With and without firewall. W & W/o a/v. Ie 7 & 8. Vista & Windows 7.
Ie64 and Ie32. And Firefox.
I upgraded from Vista 64 to W7 64. And updated IE from 7 to 8 (which gave me one day access without resetting).
Please offer suggestions. It has to be something in the software since ALL the variables have been tried (I cant think of anything else to change).
Router's webpage (192.168.1.1 which IS the address used by the EasyLink Advisor when I click on Advanced Settings) results in a Diagnose Connection Problems pages which ends with this result:
Problems found: "The remote device or resource won't accept the connection" Only when I power off/on can I get the signin popup and the web utility/admin pages.
I might add that my netbook cannot get on my network even with my password. I no longer use mac address filtering; turned it OFF. It IS in the OFF/Disabled position on the router's utility page. I think this problem might get fixed once I find the solution to getting to the admin pages/web utility pages without having to power down/up.
I can get this desktop AND the netbook on if I power everything down. But who wants to do that every time?
HELP please!
thank you for ready and any suggestions

BEFW-11s4 ver. 4 Web-Utility is downlevel

I am trying to use a BEFW-11s4 that I put on the shelf years ago. I am configuring it as a cascaded router in a LAN-LAN configuration (as the 2nd router).
The ethernet cable from the main router is connected to one of the ethernet ports on the BEFW.
DHCP is disabled on the BEFW.
The IP addr of the main router is 10.0.0.2 .
The IP addr of the BEFW is 192.168.1.1 .
I have two problems that I hope yall can help with, because reusing this router is way cooler than buying another one :-).
First, the Web-Utility of the BEFW seems to be downlevel, since it does not match the illustrations in the manual for it. I need the uplevel utility to enable WPA2 wireless security. I suspect that the firmware is downlevel also, but the linksys site says that there are no downloads available... So, where can I download & how do I install the current level of the Web-Utility?
Second, when I configure the BEFW as the downstream router, which I can get working in wired mode, I can no longer access the BEFW at 192.168.1.1 . In order to access it again, I have to only connect the computer to the BEFW, and then hold down reset long enuf to restore the original settings. If anyone knows how to get to the BEFW Web-Utility after it is set up in LAN-LAN cascaded mode, please let me know.
Thanks!!!!

The BEFW11S4 does not have the WPA2 wireless security type. I believe it is not compatible with that type of security. What you can set on the router is WPA Pre-shared key and as far as I know, the last firmware update was version 1.52.02.
For your second concern, make sure that you set a Static IP on the BEFW router so that you can access its UI. Also, do not use the192.168.1.1 IP Address on the BEFW if your router IP is 10.0.0.2 since you have a LAN to LAN network. The secondary router should be within the range of the main router. Try using 10.0.0.5 which is within the range with the main router.
You may refer to the procedure in cascading LAN to LAN on this link: http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=785463d9ecaf4cac84aed245b08d615f_3733.xml&pid=80&r...
Hope that helps!

How do I access the web utility with model cisco sf302-08p ?

Hi,i have a problem with the model Cisco SB SF302-08PP Switch , i connect a cable rj45 to my pc and configure the adapter local area connection (ip address:192.168.1.252), the LEDs blink green, and go to the address bar and get the IP by default, which according to the manual is 192.168.1.254 and the result is: page not found. Is there any way to change the web utility? How do I access the web utility?

restore the switch by holding more than 30 seconds and try accessing with ip 192.168.1.254. username and password is "cisco". before change your base ip to 192.168.1.2-253.try to ping and check the connectivity

Drive Utility Help Viewer "does not know how to handle selected URL"

I have Drive Utility 10.5.6, according to . I'm trying to reformat a FAT32 partition on an external drive to Mac OS X Ext. Journaled in preparation for using SuperDuper to back up my Mac HD boot partition. For a time, which seems to have passed, now that erasing the partition has been done. The Disk Utility Help wouldn't work. Instead of putting up topic information, I got a message saying "Help Viewer does not know how to handle selected URL", followed by an reference to an html file that allegedly existed inside a set of folders inside the app. Where, of course, Finder cannot see. Once the erasing was done, Help seems to have come back. I tried Apple Support, but could only get a reference to OS 9 Appleworks macros not working in OS X. No help at all. Is this a question? I don't know. Help is working now. But for a while it was very annoying. It must be one of those little windows glitches that no one ever bothered to fix.

In order to change a FAT or NTFS formatted drive for use with OS X you will need to do the following:
Extended Hard Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
If you have an Intel Mac and can partition the drive using GUID then you can have FAT32 and OS X partitions on the same drive.
As for problems with the Help viewer see:
In most cases doing the following will restore the Help Viewer:
1. Trash the following three files, if extant:
/Home/Library/Preferences/com.apple.help.plist
/Home/Library/Preferences/com.apple.helpui.plist
/Home/Library/Preferences/com.apple.helpviewer.plist
2. Trash the /Home/Library/Caches/com.apple.helpui folder.
3. Empty the Trash and Restart.
Visit The XLab FAQs and read the FAQ on the Help Viewer for additional suggestions.

Web util on Win XP

Hi all,
We have installed 10g Forms and Reports Services on Win XP.
On our forms we are using web util to read and write to XL files. When we run the form we get the following error 'oracle.forms.webutil.host. Host bean not found. WEBUTIL_HOST.Execute will not work.'.
Same feature, same form when we run from 10g developer suite using OC4J it is working fine.
Any clue...
Thanks & Regards,
Raja

Hi Andreas,
Thanks for your message.
I have set the path correctly in OAS. It picks up other object libraries except webutil where everything is in the same folder.
I am still getting the error.
Raja

Psd turn into JPEG prewiews after save for web. Help!

save for web>save>save optimised as>save>close. That gives me a jpeg (the previous was a psd), but in the form of a preview thumbnail, top right corner bent, loupe and "JPEG" on it. I did about 20 psd just fine,ending in the folder as jpg images, keeping their previous names and the new "jpeg" underneath. What happened?
Not less odd, as I was shrinking the folder window, (bring in the bottom right corner, but this is probably not related), all the previous ones (the jpeg images) turned into preview icons, too. By moving the cover flow, they turned back into images, and by moving them again, they turned back into jpeg
icons, this time, not with the loupe and the photos, but with 3 geometrical shapes on them. If I bring them back into Ps CS3 and save for web again, and then close, I get a "save changes to the jpeg document?" question,>save, which gives me a regular save as window, and they stay images, and I could end the problem like that, but that might cancel the previous save for web. Help! goodnight now.

I guess I have been sending all along (my almost 2 years of photoshop) inflated pictures of images (which however I take the care of reducing to 1000
pixels from the original 4000 something that they originally are). What's odd for you guys, and normal for me, is that the computer went back to turning
out "normal" .jpg images, in small characters, like it has been doing all along, as if it went on a freaky spree yesterday, and I will probably go along with it, just because i don't know how to provoke deliberatly the JPEG with the loupes which appeared breafly yesterday, and that I am supposed to expect.
I don't have any third party add on (do you mean plug in?) Only GF, sitting there, unused for a year.
Of course now i am intrigued: Marion: what do you mean by :"this may be affected by normal Finder settings" ? Any settings that i can control to get those JPEG with loupes that I should expect all the time?
Thanks everybody, i'll just leave the thread open for a bit in case somebody wants to shed some more light on my state of confusion.

Web part Help button - Where is it?

I would like to use the web part help mechanism, which seems to be available in the Advanced section when I edit the web part. (see "Help URL" in the image below). If I place a URL in this box to an htm file and save the
web part, I am unclear where I click on the web part or page to have the text of the help message appear. By the way, this is in the context of a NewForm.aspx page, if that matters.
Thanks in advance for your help.

The help URL configured can only be accessed when the web part is edited unfortunately. If you want the end users to see the help URL, you might have to educate them on where to find it.
The help mode has various ways in which you can configure how the help URL acts when clicked.
Menu options available in the dropdown are Modeless (the default),
Modal, and Navigate:
Modeless opens a popup window that allows users to continue working "behind" the popup in other windows while the popup remains open.
Modal opens a popup window that users must manually close before they're able to continue working.
Navigate doesn't open a popup at all, but navigates directly to the help content by refreshing within the already open window.
Thanks, Ransher Singh, MCP, MCTS | Click Vote As Helpful if you think that post is helpful in responding your question click Mark As Answer, if you think that this is your answer for your question.

Web Util & Report integration to gather.

Hello all
I have configured webutil and report integration in Developer suite 9i.
and it is working very fine.
now I am upgrading it to 10g.
I have configured web util and it is working fine.
and now I am getting problem to integration for "reports" as follows.
FRM-41213 Unable connect to the report server cyan.
I have developed one form for testing the report integration with form.
but when i am running this form with default configuration of formsweb.cfg then
it is working fine as follows.
http://chirag:8889/forms90/f90servlet?form=c:\temp\chirag&userid=cyan/cyan@cyan
when i am running this form using web util configuration then i am getting
the abouve error.
http://chirag:8889/forms90/f90servlet?config=cyan
but my application in Ds9i have used both webutil and report integration
so i have to find out the same thing in DS 10g.
Following are the code of report integration.
DECLARE
     mreport_other varchar2(4000);
BEGIN
     set_report_object_property('CYAN',REPORT_DESFORMAT,:CONTROL_BLK.REPORT_DESFORMAT);
     mreport_other := 'p_report_title="'||:control_blk.report_title||'" ';
     mreport_other := 'p_user_name="'||'CHIRAG'||'" '||mreport_other;
DECLARE
     report_status     varchar2(30);
     rep_id                    REPORT_OBJECT;
     v_rep                         varchar2(100);
     mreport_file     varchar2(200) := 'C:\CYAN'||:control_blk.report_path;
BEGIN
     rep_id := FIND_REPORT_OBJECT('cyan');
     SET_REPORT_OBJECT_PROPERTY(rep_id,REPORT_SERVER,'cyan');
     SET_REPORT_OBJECT_PROPERTY(rep_id,REPORT_FILENAME,mreport_file);
     SET_REPORT_OBJECT_PROPERTY(rep_id,REPORT_OTHER,mreport_other);
     v_rep := RUN_REPORT_OBJECT(rep_id);
     report_status := report_object_status(v_rep);
     if Report_Status = 'FINISHED' then
          WEB.SHOW_DOCUMENT('http://'||'chirag:8889'||'/reports/rwservlet/getjobid' || substr(v_rep, length('cyan') + 2, length(v_rep)) || '?server=' ||'cyan');
     end if;
END;
END;
formsweb.cfg as follows
[cyan]
BaseHTML=c:\oracle\cyan\server\webutiljini.htm
BaseHTMLJinitiator= c:\oracle\cyan\server\webutiljini.htm
baseHTMLjpi=basejpi.htm
BaseHTMLie=baseie.htm
lookAndFeel=oracle
envFile=C:\oracle\cyan\server\webutil.env
webUtilArchive=/forms90/webutil/webutil.jar,/forms90/webutil/jacob.jar
separateFrame=True
pageTitle=Cyan Ltd
form=C:\cyan\admin\security\forms\cyan_logon.fmx
otherparams=cyan_home=c:\cyan
userid=cyan/cyan@cyan
width=800
height=566
buffer_records=NO
debug_messages=NO
array=YES
query_only=NO
quiet=NO
RENDER=YES
logo=webpage
webutil.env as follows
ORACLE_HOME=C:\oracle\OraDS10g
FORMS90_PATH=C:\cyan\admin\global\forms;C:\cyan\payroll\forms;C:\oracle\cyan\forms
CLASSPATH=c:\oracle\cyan\lib\webutil.jar;c:\oracle\OraDS10g\jlib\debugger.jar;
c:\oracle\OraDS10g\jlib\ewt3.jar;c:\oracle\OraDS10g\jlib\share.jar;
c:\oracle\OraDS10g\jlib\utj90.jar;c:\oracle\OraDS10g\jdk\jre\lib\rt.jar
WEBUTIL_CONFIG=c:\oracle\cyan\server\webutil.cfg
Please assist me to solve this problem
from
Chirag Patel
Nairobi

Hi,
I remember that in 9i we had a problem that required both the Reports and the WebUtil java libraries to be in teh Forms classpath in the default.env. This however should have been fixed in Forms 10g.
For what it is worth, can you try
- In the registry variable "REPORTS_CLASSPATH", add the path of the jar file that will be used by webutil (webutil.jar basically)
- In the default.env file, add the Reports jar (see REPORTS_CLASSPATH for values)files to the classpath of Forms
Frank

I cant save for web - please help me?!

I cant save for web - please help me?!

It says:
"Could not complete this operation. An unknown operating system error has occurred."

Linsys WTR160N v3 can't acces web utility

I had disable the web utility acces via wireless in my router, because my neighboor hacked the system, but I did it from a wilreless computer, now I can' acces my administrator page conected with the ethernet cable to the router, I need to change my password, but every time I put the IP address 192.168.1.1., the browser time session expired. So i restar all the system?

Remote access setup is for outside your private lan, not inside i.e., access your router from your place of work a billion miles away. This is normally disabled anyway in all routers by default.
Hare reset the router and reconfigure it. Add strong security as this is the only way your neighbor could have got on, and I doubt it if you had security set anyway.

Web util install

Hi ,
I've just installed web util,and I'm trying to create a little form to test if is working.
Using 9ids patch 3 on WIn XP.
when running a form with the webutil block attached,a alert message shows up :
WUC-18 Invalid server side file specification http://localhost:8888/forms90/f90servletwebutil/jacob.dll
and the same for the others dll files.
I've created the webutil virtual directory exactly the docs said,and I'm able to download the dll file from
http://localhost:8888/forms90/webutil/jacob.dll
Why is webutil lookoing for a f90servletwebutil virtual directory?
Does the people form ORacle has any ideea why this is happening?

I've just fixed the nls problem,turned on logging for webutil,moved the webutil block to be the first on the form.
I'm not receiving the alert about the dll files any more, webutil information is showing fine ,but the process is failing after,
And,in the bin directory of JInit,there is no jacob.dll,or d2kutil.dll file installed.
HEre is the new output :
Loading http://localhost:8888/forms90/webutil/webutil.jar from JAR cache
Loading http://localhost:8888/forms90/java/f90all_jinit.jar from JAR cache
RegisterWebUtil - Loading Webutil Version 1.0.2 Beta
Loading http://localhost:8888/forms90/java/utils.jar from JAR cache
Loading http://localhost:8888/forms90/java/icos.jar from JAR cache
Loading http://localhost:8888/forms90/webutil/jacob.jar from JAR cache
proxyHost=null
proxyPort=0
connectMode=HTTP, native.
Forms Applet version is : 902122
2003-Oct-20 13:15:04.702 WUI[VBeanCommon.findLocalHost()] obtaining LocalHost info from InetAddress
2003-Oct-20 13:15:04.718 WUF[VBeanCommon.findLocalHost()] obtaining LocalHost info from InetAddress
2003-Oct-20 13:15:04.718 WUH[VBeanCommon.findLocalHost()] obtaining LocalHost info from InetAddress
2003-Oct-20 13:15:04.734 WUS[VBeanCommon.findLocalHost()] obtaining LocalHost info from InetAddress
2003-Oct-20 13:15:04.749 WUT[VBeanCommon.findLocalHost()] obtaining LocalHost info from InetAddress
2003-Oct-20 13:15:04.781 WUO[VBeanCommon.findLocalHost()] obtaining LocalHost info from InetAddress
2003-Oct-20 13:15:04.796 WUL[VBeanCommon.findLocalHost()] obtaining LocalHost info from InetAddress
2003-Oct-20 13:15:04.796 WUB[VBeanCommon.findLocalHost()] obtaining LocalHost info from InetAddress
oracle.forms.net.ConnectionException: Forms session <2> aborted: unable to communicate with runtime process.
     at oracle.forms.net.ConnectionException.createConnectionException(Unknown Source)
     at oracle.forms.net.HTTPNStream.getResponse(Unknown Source)
     at oracle.forms.net.HTTPNStream.doFlush(Unknown Source)
     at oracle.forms.net.HTTPNStream.flush(Unknown Source)
     at java.io.DataOutputStream.flush(Unknown Source)
     at oracle.forms.net.StreamMessageWriter.run(Unknown Source)
2003-Oct-20 13:15:37.313 WUB[VBeanCommon.destroy()] WebUtil Browser Functions being removed..
2003-Oct-20 13:15:37.329 WUL[VBeanCommon.destroy()] WebUtil C API Functions being removed..
2003-Oct-20 13:15:37.516 WUO[VBeanCommon.destroy()] WebUtil Client Side Ole Functions being removed..
2003-Oct-20 13:15:37.516 WUT[VBeanCommon.destroy()] WebUtil File Transfer Bean being removed..
2003-Oct-20 13:15:37.532 WUS[VBeanCommon.destroy()] WebUtil Session Monitoring Facilities being removed..
2003-Oct-20 13:15:37.532 WUH[VBeanCommon.destroy()] WebUtil Client Side Host Commands being removed..
2003-Oct-20 13:15:37.547 WUF[VBeanCommon.destroy()] WebUtil Client Side File Functions being removed..
2003-Oct-20 13:15:37.547 WUI[VBeanCommon.destroy()] WebUtil GetClientInfo Utility being removed..

WRT54G Web-utility Issues

First of all...I'm using a Linksys WRT54G v5 wireless router and a sbc/yahoo DSL service with a Siemen's 4100 DSL modem. I am addressing all of my issues using a Dell XPS710 fully loaded running Windows Vista and using IE 7.0.6 I've always been able to use the internet (besides DSL's inevitable issues), but in the last few days have been messing with the settings of my network in order to streamline our filesharing/printersharing within my household.
So I tried checking out the 'General Linksys Router FAQs' but when I clicked the links regarding my problem, it only loaded windows addressing how to set up a "PPPOE DSL service."
So my issue is in regard to accessing the Web-based utility. When I key in my router's IP address to my web browser (http://192.168.1.1/) and type in the generic password, then it loads the web-utility with obvious 'errors on page.' I then cannot do anything more than change the time zone...I cannot chose a different tab than the "Setup Basic Startup" tab which loads automatically.
When I click on the "wireless" tab for example, a white page loads with this gibberish:
¶âÐ&†¶¤ ´! h% Cèl£¹>²$h VÚ ªå QVÄš\aIAB Öd` «°xU cñj Veñê Æâ5 ¬Æâ5)ŒÅk X Å;¡0 O– ° cDæ‰äË eì …BÚƒ,í³³óÅ ÍÚA †P ¿þ öc.]¡˜g®2( Ê1‘3š)}l’Ç*y¬ÐÖ }¤uòX¥ úH[›ä±F[[ô‘¶ž Ç:m•%úL›e:¯FÐN'Ö ÚéÌšA; Z«†ž 50<ˆ g^Œ3/Æ™ ãÌ‹qæÅ8óbœy1Î¼˜`^L0/&˜ Ì‹ æÅ$ó(Œ™ÇÎd‹Â Â W0• ‘ Ãvˆ•´Í®"µÍR Û
I can then return to the previous page on my browser to see the Setup screen again, but there are still obvious visual errors in how the page loaded (it has some of those stupid 'red x's' where images were supposed to load).
So I tried updating the the firmware (its still 1.00.6) using the instructions I found for my router on the linksys website...but halfway during the upload of the .bin file from the management screen, the page failed to load and I recieved the "Internet Explorer cannot display the webpage" message. Since then, my connection has been cutting in and out (Local only) and sometimes I cannot view that the WRT54G is part of my network. Connecting to the internet directly through my DSL modem works just fine still.
So why can't I access my web-utility correctly? Why can I not upgrade my firmware? Would upgrading the firmware fix the web-utility access errors? Why is the connection cutting 'in and out' rather than just not working? Has ANYONE else had this problem (with the web-based utility not loading correctly in IE)?
Thanks,
Todd W.
Message Edited by Veridicus on 12-11-2007 07:11 AM

I fixed it! I had to 'reset' the modem for that minute and then upload the firmware from a non-vista pc. The web browser gave me the 'upload successful' page and so I restarted the computer and unplugged and replugged back in the router...then when the computer rebooted and I loaded the Linksys Router Web-Utility...viola...it no longer contained those ridiculous error screens or jibberish.
And here I though I was gonna have to drop another 50 bucks...

BT Web Address Help service, i dont want BT interc...

Hi Guys, I came accross this service yesterday when trying to navigate to a URL that is no longer valid, after doing this i was redirected to a BT Web page saying the URL is invalid and suggesting some alternative pages for me rather than just getting the usual page not found msg from the web browser, i understand this could be a usefull service but i do not appreciate BT hijacking my search information without my express permission even if it is to help me, anyway a quick google search gave me 1 link with instructions of how to disable this service, I cannot find any official information from BT on any of its own sites with regards to this service, it totally smacks of the secret phorm trial that BT was running some time ago. anyway if this happens to you here is a link to the page that helped me to disable it if you so wish.
http://timstephenson.me.uk/bt-web-address-help-would-have-been-nice-if-b
hope this helps
Regards
Dyno

Hi all
Web Address Help is a new service launched by BT which provides useful search results in place of an error message when a URL has been typed incorrectly. Customers are automatically given Web Address Help unless they tell us they don’t want it. It is easy to opt out if you would prefer not to have this service.
We have further information about Web Address Help on our Help pages on BT.com. This page contains clear instructions on how to opt out. Please use this link to find out more: http://www.bt.com/help/webaddresshelp
Thx
Kerry
Retired BTCare Community Manager - StephanieG and SeanD are your new Community Managers
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

** Web Utility Help! **

Similar Messages

Maybe you are looking for

Web Utility Help!