Web-View videos not playing audio

When we create the weblinks for the web-view version of our app, the videos play fine but without any audio.
Is this a know issues, or are we doing something wrong?

I would try testing the video in a different folio/article to see if it works in Web Viewer. If that works, unpublish/re-publish the folio unless you think that would be disruptive.

Similar Messages

U310 Touch - Videos not playing after 8.1 Update

Hello,
I have updated from Windows 8 to 8.1 and updated all my drivers on my U310 Touch.
However, I seem to have a problem with web based videos not playing videos on the internet.
This seems to happen on every kind of web browser, including IE, Firefox, Chrome, and even Steam.
If anybody knows how to fix this problem, that'll be great.
Thanks in advance.

Since the upgrade to 8.1.1 my iPhone 6 stopped recognising the fingers I had stored. I've deleted and addrd them again (which went as norma) and it still has problems recognising them. Seems very intermittent now, whereas before this upgrade was very reliable.
I've reverted to a pin code :-(

DVDSP Help - Video not playing in Viewer during some assets, only audio...

Video not playing in Viewer during some assets, only audio until paused. once you hit the space bar or pause, the video shows up in viewer? same results when burnd to disc.
when dragging cursor through out timeline (track 1) video shows up in viewer fine too.
any advice on what could be wrong?
at first i was thinking this was a memory problem, i added another Gig of ram and the problem still exhists.
thanks!

Hi Crazy Dan:
It's a kind of bug in DVDSP Simulator. If you build your project in your hard drive and test it with DVD Player all video will play fine.
I would like to tell you where exactly the problem is located, but it's just a Simulator problem.
Try building your project.
Hope that helps !
Alberto

When using ipad4, why do videos not play on Google? Audio works fine

WWhen using ipad,why do videos not play on Google? Audio still plays. I have reset the Google app and it will be ok for short time but then reverts back to not playing videos.

Hi Vernon70,
Welcome to the Apple Support Communities!
I understand that an application you downloaded from the App Store, Google, is not functioning as you would expect. In this situation, I would recommend following the troubleshooting steps outlined in the attached article.
If an app you installed unexpectedly quits, stops responding, or won’t open - Apple Support
Best regards,
Joe

Embedded MP4 videos not playing in iOS Safari

Hi everyone,
I'm having a problem with embedded MP4 videos (e.g. YouTube videos) not playing correctly in Safari. When I try to play one, I get one of two problems:
1. On my (first gen) iPad, Safari usually crashes.
2. On my iPhone 4, videos will load but only play audio, not video, though when I tap on the screen the "play" and "pause" symbols appear.
Has anyone else run into this problem? Or know how to fix it?
Thanks,
Mike

Ok, I fixed it. Go to some embedded Flash video, click to run and then right click to get Global Settings for Flash. Go into Storage and make sure you aren't blocking any data from being stored on your computer. At the very least choose the "ask me" setting. (For good measure I also went into Advanced and clicked to Delete All Data associated with Flash. But when I restored Block for data storage the videos stopped working, so that seems to be the answer.) I'd be interested to hear if this works for others.

Why does my ipod not play audio?

my ipod touch 4th gen 16gb will not play audio unless it has headphones in. it is second hadn but the seller said nothing about this and the ipod is in perfect condition except for this. i have tried putting the headphones in and out and resetting the ipod, neither of these made any difference. when i play a video or a track without headphones in, the volume slider disappears as if there is no audio file. alarms and facetime sound effects etc still play so i dont think the speakers are broken. please help.

- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted.
Try the following to rule out a software problem
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar
If not under warranty Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace the jack for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the jack yourself
iPod Touch Repair – iFixit

Encore 1.5 projects not playing audio in Encore 2.0

So far, four out of five transcoded projects I created in Encore 1.5 will not play audio in Encore 2.0. I can open the projects up in 1.5 and get audio with video. I close 1.5, start up 2.0 and load the project. Previewing it results in a silent movie. No audio whatsoever.
Other projects have converted fine. I notice that no Audio Conforming goes on for the non-audio projects, while I see Audio Conforming for the lone 3min 30sec project that does have functional video. Am I missing something here?

Okay, stupid me. Not enough disk space on the drive where the project is located. Once I cleared off some space, the Audio Conforming bar went ahead and I have my audio.
By the way, I was looking at the Windows Task Manager, not the Progress panel.
I grumble just a little bit because there is no error message or notification of insufficient disk space. Only a mute Encore.

My 2nd generation ipod touch will not play audio books

My 2nd generation ipod touch will not play audio books. How do I fix this? I downloaded the books from iTunes on my computer. I loaded them on my ipod. It shows them on my ipod. It will go to the menu where you can choose which book and then actually pulls up the book then acts like it is going to play. Then it just goes back to the list of books. It won't play any of them. It will play music though.
How do I fix this?

The books do play in iTunes on the computer, right?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and audion book and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Video not played using JMF while tramitting stream over RTP

video not played using JMF while tramitting stream over RTP
I am using code to tranmit video using RTP using JMF and i am able to successfully get the video on client side
Code to send the video over rtp
http://java.sun.com/javase/technologies/desktop/media/jmf/2.1.1/solutions/AVTransmit2.java
code to recieve video over rtp
http://java.sun.com/javase/technologies/desktop/media/jmf/2.1.1/solutions/AVReceive.html#source
My problem is i am not able to play video in AVTransmit2.java.
If i create a player using datasouce, eigther i get player already occupied or a black screen.
please help me running the video on Transmit side as well.
NOTE: i am using web cam for video source
Edited by: qasitouch on Dec 23, 2009 5:55 AM

I am not getting any error on consol, rather video is not displayed on media screen but black rectangle.
On Transmitter
     // Try to create a processor to handle the input media locator
     processor = Manager.createProcessor(ds);
createPlayer(Manager.createCloneableDataSource(ds)); // here i am craeting a player to show the video on transmitter end aswell.
Player code:
     private void createPlayer(DataSource ds) {
          try {
               Player player;
               if(processor!=null)
                    System.out.println("processor: " + processor);
                    player = processor;
               }else{
                    System.out.println("null is processor");
               player = Manager.createRealizedPlayer(ds);
               Component video = player.getVisualComponent();
               JFrame mediaFrame = new JFrame("Camera Screen");
               mediaFrame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
               mediaFrame.add(video);
               mediaFrame.setSize(300, 300);
               mediaFrame.setVisible(true);
               player.realize();
               player.start();
               player.prefetch();
          } catch (NoPlayerException e) {
               // TODO Auto-generated catch block
               e.printStackTrace();
          } catch (CannotRealizeException e) {
               // TODO Auto-generated catch block
               e.printStackTrace();
          } catch (NotRealizedError e) {
               // TODO Auto-generated catch block
               e.printStackTrace();
          } catch (IOException e) {
               // TODO Auto-generated catch block
               e.printStackTrace();
          } catch (Exception e) {
               // TODO Auto-generated catch block
               e.printStackTrace();
I am not getting any error and not running on the same side. My problem is showing video on Tranmitter end.
Using above code i can create player and a black screen is showing, i am ubable to find, why video is not played in screen.

Why are my videos not playing the right way up

Why are my videos not playing the right way up

I took four video clips while on a trip this week. Two are oriented the right way (playing wide on the device and imported correctly). The other two are Tall and not oriented right. Orientation is 90 degrees to the right. I don't know why this is happening on occasions. Even some pictures I took did the same **** thing. It's weird. And I can't figure it out. The camera is held the way I want the pictures and videos to be recorded and played but something internal is turning these videos and pictures 90 degrees clockwise.

Video only playing audio

On my PC (Windows7 and ITunes10.6), my music videos only play audio. It did play both video and audio, but currenly only audio is working. Any advise is appreciated.

See if this article will help:
Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
http://support.apple.com/kb/TS1718

Video not play on phone

Mp3 play but video not play my phone
my Email add. [email protected]
Moderator's note: E-mail address was removed. Please don't publish your personal contact information on a public forum.

sharankumar1, which phone model do you use? Nokia phones are a bit picky about the file content, the codec. If you tell me your model, I tell you the available codecs. In the meantime, you have to convert your videos …

Yahoo video and other video not playing

Yahoo and other video not playing in firefox 37.0.2
They played automatically 5 days ago....since then video screen is blank...no 'play' button
I have updated Flash several times
Tried to play these videos on IE....don't play there either.
Thanks for your help!

Note that your System Details List shows multiple Flash plugins.
# Shockwave Flash 15.0 r0
#Shockwave Flash 17.0 r0
You can find the installation path of all plugins on the <b>about:plugins</b> page.
*http://kb.mozillazine.org/Issues_related_to_plugins#Identifying_installed_plugins
You can check the Flash player installation folder for multiple Flash player plugins and remove older version(s) of the plugin (NPSWF32) and possibly (re)install the latest Flash player.
*(32 bit Windows) C:\Windows\System32\Macromed\Flash\
*(64 bit Windows) C:\Windows\SysWOW64\Macromed\Flash\
You can find the latest Flash player versions for Firefox on this page:
*http://www.adobe.com/special/products/flashplayer/fp_distribution3.html

You tube videos not playing

You tube videos not playing on safari, my flash player is up to date, i tried to refresh, quit safari, again tried to play, but every time it shows "an error has occurred, please try again later". I did almost everything to make it work but its not working... help needed

Try deleting the cache and cookies for YouTube.

I'm running Windows XP and FF 8.0. I'm having more trouble than ever with intermittent streaming and videos not playing all the way through. What is the easiest way to fix this?

. I'm running Windows XP and FF 8.0. I'm having more trouble than ever with intermittent streaming and videos not playing all the way through. What is the easiest way to fix this?

That may be a problem with the VLC plugin. VLC has never worked for me properly on the occasions that I've tried it on Windows and Linux, so I have stop using it. There are usually other plugins or media players available that work better.
What kind of media files are that?
For WMP files you can install the new Windows Media Player plugin you can also try RealPlayer and QuickTime if it is about media that those programs can handle to see if that works better.
* https://support.mozilla.com/kb/Using+the+Windows+Media+Player+plugin+with+Firefox
* http://kb.mozillazine.org/Windows_Media_Player#Missing_plugin
* http://www.interoperabilitybridges.com/windows-media-player-firefox-plugin-download

Web-View videos not playing audio

Similar Messages

Maybe you are looking for