WebAnalysis Document Sharing in System 9.3.0.1 Workspace

What's the secret sauce? I've set the file permissions to FULL CONTROL for my groups and users and they cannot open a document published in Workspace! Has anyone done this before and can you share the secret?

Hello,
If you could provide a little more detail it might help narrow down the issue.
Do the user's see the document within Workspace?
Do they get an error when trying to access the document? If so what is the error?
Are the user's provisioned to be able to access WebAnalysis?
Do the user's have the appropriate JRE installed to launch the WebAnalysis Applet?

Similar Messages

  • I cant activate my web sharing in system preferences

    I cant activate my web sharing in system preferences, what do I do ?
    tks for help...

    Here's a quickly copy and pasted excert from David Pogue's book, Lion: The Missing Manual...
    Firing Up Web Sharing
    Here’s how you turn your Mac into a low-budget Web site: Put the HTML documents, graphics, and files you want to publish into your Home → Sites folder. Every account’s Home folder has a Sites folder, and therefore the Mac can actually serve up lots of Web sites at once. Your Web site’s home page, by the way, won’t appear unless it’s named index.html. (Apple has already put an index.html document into your Sites folder, just to give you the idea; feel free to replace it.) And the other files you put in Sites aren’t accessible unless they’re linked from your index.html page.
    Open System Preferences; click Sharing. Turn on the Web Sharing radio button.
    Use the Sharing System Preferences pane to make designated folders on your hard drive available to anyone on your network. Note that your Mac’s IP address, shown here in underlined type, works only when people connect from across the local network. It probably won’t work from across the Internet; see the box on the facing page. You’ve just made the contents of your Sites folder available to anyone who connects to your Mac. Also note the line below the Computer Name box. That’s your Mac’s Bonjour name, which is a bit friendlier than its IP address. Send your network address to your friends and coworkers
    People on your local office network can use your Mac’s Bonjour name to connect. It appears at the top of the Sharing pane, as shown in Figure 22-1. For example, your colleagues can type http:// office-mac.local/ ~ chris into their Web browsers, where office-mac.local is your Mac’s Bonjour name and chris is your short user name. If other people will be connecting from the Internet, you need to figure out your public IP address; as noted in the box on The IP Address Mess: Port Forwarding, that might be your router’s IP address, not your Mac’s. Your Mac Web site’s address might be, for example, http:// 111.222.3.44/ ~ chris/ (the number is your public IP address, and the name should be your short user name). Don’t forget the final slash. Tell your friends to bookmark it so they won’t have to remember all that. You’ve just put your Mac-based Web page on the Internet for all to see— that is, all who know your secret Web address. Maybe you’ll want to distribute the address only to other people on your office network, using your tiny Web site as a distribution source for documents. Or maybe you’ll want to go whole-hog, hosting an e-commerce Web site (read on). The Mac’s Own Web Site The instructions above show you how to create a Web site in your Home → Sites folder. In other words, they guide you through the process of creating a personal Web site. But if you have an Administrator account (Chapter   12), you can also put your Web pages into the main hard drive window’s Library → WebServer → Documents folder. This is your Mac’s main Web site folder, and its address is simply, for example, http:// 111.222.3.44/. That is, it’s just your public IP address, no user name needed. (Here again, if people will be connecting from across your office network, they can replace the IP number with your Mac’s Bonjour name.) Working with this primary Web site folder is only slightly different from the personal ones described above. Because you’re now working inside an official Mac OS X system folder, you must mind your permissions. Using the File → Get Info command, you should set up the permissions of any folders and documents inside the Library → Web-Server → Documents folder (an Images folder, for example). That way, you can ensure that you’re in control of which visitors are allowed to do what with your Web documents. The Easiest Way to Distribute Files Here’s a handy secret: If there isn’t a document whose name is index.html in your Sites folder (or index.html.en in your Library → WebServer → Documents folder), then visitors see, in their browsers, a handy list of the files that are in that folder (see Figure   21-2). This is a terrific convenience: It offers a quick, simple way for you to make a bunch of documents available for downloading. All your visitors have to do is click one of these file names. It downloads immediately, no matter what kind of computer your Web visitor is using.
    Pogue, David (2011-10-19). Mac OS X Lion: The Missing Manual: The Missing Manual (pp. 816-817). OReilly Media - A. Kindle Edition.
    Maybe this will help? It will at least bump the message up again!
    Clinton

  • Office 2013 - Word cannot establish a connection with this document after the system resumed from suspend mode

    Hiya!
    This issue has been answered numerous times for Office 2010 and Office 2007, but I have yet to any solutions or Hotfixes that work for Office 2013 (x64) on Win7.
    How to replicate the issue:
    Open a file from a network share.
    Edit file.
    Leave computer on with file open. Computer goes to sleep or into stand-by mode.
    Wait a bit
    Wake up computer
    CPU opens file in Read-Only mode and gives you the following error "Word cannot establish a network connection with this document after the system resumed from suspend mode. Save the document into a different file to keep any changes."
    What I've tried:
    http://support.microsoft.com/kb/2434898 - Office 2007 registry fixes. Does not apply.
    http://support.microsoft.com/kb/2413659 - Office 2010 problem. This exact issue. Says 'No microsoft products that match this hotfix are installed'
    Work Around:
    I can saving new versions of these files overrides this issue, but this is sometimes not possible for end-users who only have specific access to ONE SPECIFIC FILE in a particular network share.
    Please let me know how I can alleviate this issue!
    Thanks
    -Chris

    Hi,
    Are those problematic documents created via previous versions of Office?
    Please also try to run a repair of your Office 2013 installtion and check if it helps. See:
    http://office.microsoft.com/en-in/excel-help/repair-office-programs-HA010357402.aspx
    Regards,
    Steve Fan
    TechNet Community Support

  • How can I place my initials when in a document shared review?

    When in a document shared review envitronemnt, the Sign Document menu is grayed out, I want to be able to place my initials in
    a document, what are my options?

    The contents of the folder-level JavaScript file can simply be:
    // Create and set the value of the identity.initials property
    identity.initials = "GWJ";
    You can then retrieve the value in your dynamic stamp JavaScript to the the value of a field, something like:
    // Code in calculation of a text field in a dynamic stamp
    event.value = identity.initials;

  • I want to sign the SECOND page of a pdf document and this system won't let me scroll down past the first page!

    I want to sign the SECOND page of a pdf document and this system won't let me scroll down past the first page!

    Having the same issue, can someone please enlighten us?

  • WebLogic as Windows 2000 service over s shared file system

    I am trying to install weblogic as a Windows 2000 service over a
    shared file system with no sucess
    (the shared fie system is provided by windows 2000 cluster services).
    I am using the srvany utility to have the script that launches
    weblogic be run as a service (I need this
    because I must launch 2 instances of weblogic in the same machine
    as services, i cannot do this
    with the bea service tools, having different configurations for
    the classpath, or can I?)
    The service works if weblogic is not installed in a shared file
    system.
    On the shared file system, it fails (The service fails, is unabble
    to start). I also made a script on the local file
    system, that calls the weblogic script on the shared file system,
    but weblogic fails to start (with no
    message) when loading from the weblogic.classpath
    thanks for your attenction,
    Bruno Antunes
    WhatEverSoft - Java Center

    I have also tried running the service with the bea tools, with no
    sucess when running in
    the shared file system.
    When i start the service, it seems to start ok, then stops. with
    no message.
    Nothing is written to the log, any ideas?
    Bruno Antunes
    WhatEverSoft - Java Center

  • Create transfer order for material document - 4.6C system

    Hi Gurus
    Can any one provide me the function module or BAPI to create transfer for material document in 4.6c system. I have to give input as supply storage type and bin and destination storage type and bin while execting the function module.
    Thank you in advance
    Regards
    Sarath

    Sarath,
    Thanks for responding, I finally found my answere via Thread: create transfer order for material document - 4.6C system
    Thanks again.

  • Set sharing on system to read only now computer wlll not boot up

    set sharing on system to read only now computer wlll not boot up

    Hello skiboat2, 
    Because the permissions have been changed, you will need to put them back to what they were before. One of the ways to do that is to reinstall your OS X to make sure that everything permission wise gets put back to what it needs to be to work properly. Based of to the operating system that you say you have, I have provided the steps for reinstalling Snow Leopard. When doing this, it does not overwrite your personal data; it only touches the operating system. 
    Mac OS X 10.6: Reinstalling Mac OS X
    http://support.apple.com/kb/PH6606
    Regards,
    -Norm G.  

  • Document Sharing

    Hi…
    So, one of my fav apps is good reader. They just released an update that allows for document sharing so that, for example, if you get a pdf attachment in one of your emails, you can open it in good reader.
    When a single-page pdf comes in via email, that document is "open" in the mail view window. Because of this, I've been unable to "open in good reader."
    With a multi-page pdf, I see an icon for the file. If I touch and hold on that icon, I get a dialogue that allows me to open into good reader. But, I can't seem to do this for single-page PDFs.
    Am I missing something? How do I accomplish document sharing on a single-page PDF?
    Thanks!

    I use DropBox, but this doesn't really solve my issue here. Drop box is great if I'm at home on my mac and can save a file to drop box for later viewing on the iPad.
    However, if I'm NOT at home, and an email comes in with a single-page pdf attachment, and I want to be able to open it in GoodReader, there seems to be no way to do this using the Document Share feature.
    I've suggested the feature update from Apple, but if anyone else has a solution, let me know.

  • Defaulting the Document date to system date while GR cancelation via MIGO

    Hi All,
    While canceling a GR via MIGO transaction, i manually change the Document date to system date, but after posting still the document date is showing the original document date when is was posted.
    Is this is the standard behavior?
    I have a requirement to make this date default to system date. But it is not considering the date which we centered in the screen.
    Kindly help me to resolve this issue.
    Srinu Kaduri

    Hi,
    while doing GR cancellation,system will take only system date for example today will be in the document date.
    With Regards,
    Jaheer

  • How to read and store the documents from other system to own system.

    Hi Experts,
    i need to read the document from other system (Say from other connected R/3 system) and then i need to save it in my system.
                     Please suggest how would i proceed?
    Any helpful suggestion will be rewarded with points.
    thanks
    Snehasish

    Hi Abaper
    I think I havent explained my problem well. Here I am explaining it again..
    I want to pull an  *.excel/ *.csv file through ABAP code.The target file that I want to access in my ABAP code is stored into another PC in the same Local area network under some directory say 'c:\temp\credit.csv'.
    I have the logon information of the target file's  PC.
    Please help me with code if anyone of you having.
    Thanks in advance.
    Rgds,
    Snehasish
    Edited by: Snehasish Das on Apr 29, 2008 2:18 PM
    Edited by: Snehasish Das on Apr 29, 2008 2:33 PM

  • Error in ERP system  while copying the document from CRM system

    Hi Friends,
    I have created a CRM sales order in CRM Web Ui or Gui. I am getting this Errors.
    Diagnosis
    Errors occurred while transferring the document into another system. To view the error messages, see the enclosed log.
    Transmission log
    u2022     Product  cannot be recoded for ERP System  (Notification E CRM_ORDER_MISC 015)
    u2022     Product  cannot be recoded for ERP System (Notification E CRM_ORDER_MISC 015)
    u2022     No customer is assigned to business partner 417283 (Notification E CRM_BUPA_MAPPING 002)
    Please give suggestions what can i do for this.Please specify clearly the required steps to debug this error
    also
    with respect to first error ,I tried to replicates the product from crm to ERP system in COMMPR01(Send to ERP Option), but it has given this error.
    "input data for industrial material is not fully"
    regards,
    sunil

    Hi Sunil,
    You are getting error in the Sales Order is because of Master Data.
    Sales Documents will flow from CRM to R/3 when master data is consistent in R/3 & CRM side.
    Please maintain the master data in R/3 side & download into CRM Side.
    For Customer use adpater object CUSTOMER_MAIN & for Material object is "Material"
    Use following link for downloading  Customer Master & Material master.
    http://help.sap.com/saphelp_crm20c/helpdata/en/4D/CFF837A9AAE651E10000009B38F8CF/frameset.htm
    http://help.sap.com/saphelp_crm20c/helpdata/en/67/bdcbe77d9611d396bd00a0c930e0da/content.htm
    Best Regards,
    Rajendra

  • How to create pre-defined folder in the document sharing iView in a room?

    Hi everyone,
    As title, I would like to know how to create some pre-defined folder(s) in the document sharing iView in a collaboration room?
    Hope you someone can help me~~
    Thanks and best regards,
    Marcus

    Try it like this:
    Help with collaboration rooms templates
    and here are soem of those docs:
    http://media.sdn.sap.com/public/KMKeywords/Collaboration-Room.html
    Regards,
    Darin

  • Regarding shared file system requirement in endeca server cluster

    Hi,
    Our solution involves running a single data domain in an endeca server cluster.
    As per the documentation, endeca server cluster requires shared file system for keeping index file for follower node to read.
    My questions are,
    Can I run the endeca cluster with out shared file system by having the index file on each node of the endeca server cluster?
    Can dependency on shared file system be a single point of failure, if yes how can it be avoided?
    I really appreciate your feedback on these questions.
    thanks,
    rp

    Hi rp,
    The requirement for a shared file system in the Endeca Server cluster is a must. As this diagram shows, the shared file system maintans the index, and also maintains the state of the Cluster Coordinator, which ensures cluster services (automatic leader election, propagation of the latest index version to all nodes in the data domain). A dependency on a shared file system can be a single point of failure and requires to run a backup, -- this is a standard IT approach, that is, it is not specific to the Endeca Server cluster in particular.
    See this section on Cluster Behavior, for info on how the shared file system is used (the topic "how updates are processed"), and on how increased availability is achieved.
    HTH,
    Julia

  • Shared file system  recomended for OCR and voting Disk in 10g R2

    Dear Friends,
    For Oracle 10g R2 (10.2.0.5) 64 bit which shared file system is recomended for OCR and voting Disk (NFS / raw devices / OCFS2)
    For Datafiles and FRA i planned to use ASM
    Regards,
    DB

    Hi,
    If your using standard edition then you got no choice but raw devices
    http://docs.oracle.com/cd/B19306_01/license.102/b14199/options.htm#CJAHAGJE
    for ocfs2 you need to take extra care
    Heartbeat/Voting/Quorum Related Timeout Configuration for Linux, OCFS2, RAC Stack to Avoid Unnecessary Node Fencing, Panic and Reboot [ID 395878.1]

Maybe you are looking for