WebAnalysis graphics report doesn't show decimals in correct way

WebAnalysis Studio 9.3.0
I have reports with graphics:
The problem is that when I change the graphic properties to show only 2 decimals in the axis, the report still show 3 decimals. If i change to 5 decimals, it works, but when I change it back again to show 2 decimals, it show 3 again.
The format is Numeric
I tried on different machines, but the problem persist
Any idea?
Thanks in advance.
Adrian from Argentina (pleas, sorry any error in my English)

Similar Messages

Abandoned Cart report doesn't show results any more

Does anyone know why the Abandoned Cart report doesn't show results any more? We know we have has some occur in the past.

Hi MandaWeb2,
This was reported as a bug to the dev team. I don't have an ETA for you on when it will be fixed, but it's certainly with them.
Cheers,
-mario

Reports doesn't shows horizontal scroll bar after EHP5

Hi All,
After EHP5 SP level, under menu MSS -> My Staff -> Reporting, any reports doesn't shows horizontal scroll bar, to view last colums. I tried with Authroziation SAP ALL but still issue persists.
Thanks,
Cheers!!!
Sara

can you chekc note 1531182
1. Open SAP Note 19466 - "Downloading SAP kernel patches"
2. Follow the instructions on the a above note and implement the Kernel
patches contained on SAP Note 1531182 - "Number of fixed columns is
incorrect"

Profit Center Report doesn't show data

Dear Experts,
I've posted some data thru FB50 in FI, with different cost center assignment 1201 and 1202. Both cost centers are assigned to profit centers, YB110 and YB120 respectively in master data.
Then, I tried to run a profit center report, S_ALR_87013326 from Profit Center Accounting (PCA) module but doesn't show any data.
Do I need to do any period-end processing in order to get the data out from PCA report?
By the way, the selection required for plan version, I just keyed in '0'. Not sure of the number, where to find the plan version as I didn't create any plan before this.
regards,
Abraham

Hi
If you see the screen shot I attached, it has the text "(new)" against the Folder name...
All new gl reports are under such a folder to differentiate... You cant deactivate any reports from the Standard Menu... You can just control it by authrization....
You can also ask your BASIS guy to display only the authorized trans on the user screen so that they are not able to see the std set of transactions
Br, Ajay M

SAP Business One 8.8. Report doesn't show and workstation doesn't respond.

Hi all,
We have a customer with:
SAP Business One 8.8 (8.80.237) PL: 19 HOTFIX1.
Sql Server 2005
Crystal Reports 12.1.3.1028
We have done some reports wich run under server machine but not under workstation.
Even i've done a dummy report without any data connection and it doesn't run under workstation (server machine works perfectly). This dummy report only show a label with static text "Hola".
We don't receive any error message, SAP Business One client doesn't respond and in task manager you can see "not responding" message.
SAP support connected to our customer installation and they suggested us formatting workstations computers. We did it but the problem persists. Thank you very much for your help.
Kind regards,
Nauzet Díaz

Hi,
In this case, why you not responded to SAP for their suggestion of formatting the workstation?
If you unfortunately closed the old support ticket, then just raise a new support ticket with reference of the old one too.
Regards,
Bala

Reporting doesn't show the newly installed SCOM Agents

Hello,
I am running SCOM 2012 SP1 on Win2008 R2.
I recently deployed scom agent to couple of machines the agents are showing up healthy and i can see the performance and health data from Monitoring tab but when i try to run report i can't find these new agents in the objects to add to report.
Report
it doesn't even query the agents.
and on the SCOM manamgent server i see this error in event viewer not sure if it is related.
Data was written to the Data Warehouse staging area but processing failed on one of the subsequent operations.
Exception 'SqlException': Sql execution failed. Error 2627, Level 14, State 1, Procedure ManagedEntityChange, Line 368, Message: Violation of UNIQUE KEY constraint 'UN_ManagedEntityProperty_ManagedEntityRowIdFromDAteTime'. Cannot insert duplicate key in object
'dbo.ManagedEntityProperty'. The duplicate key value is (528, Aug 25 2013 8:52AM).
One or more workflows were affected by this.
Workflow name: Microsoft.SystemCenter.DataWarehouse.Synchronization.ManagedEntity
Instance name: 08eb00a2-e227-4472-a368-a6e42a2bc502
Instance ID: {EEFCB078-6517-97CD-FA4F-8FCAB54E4930}
Management group: OPSMGR
Regards,
Maqsood
Maqsood Mohammed Senior Systems Engineer MCITP-Enterprise Admin & ITILv3 Foundation Certified

Ok, so at this point, without enabling logging and going to the extremes, I would attempt an uninstall and reinstall of the agents. One at a time. So remove the agents. Reinstall one, and monitor what is happening on that server, and investagate
it in the ops console.
If you know what applications are on the box, and being discovered, look for the server in discovered inventory for those classes, etc.
Before you do that, you can try to run this against the DW to see if there are any alerts associated with these two servers, that is if they ever raised alerts:
USE OperationsManagerDW
SELECT Alerts.AlertName, SUM(1) AS 'Alert Instances', SUM(Alerts.RepeatCount + 1) AS 'Alert + Repeat Count',
CASE Alerts.MonitorAlertInd WHEN 1 THEN vMonitor.MonitorDefaultName WHEN 0 THEN vRule.RuleDefaultName ELSE 'Not found' END AS 'Rule or Monitor Name',
CASE Alerts.MonitorAlertInd WHEN 1 THEN 'Monitor' WHEN 0 THEN 'Rule' ELSE 'Not Found' END AS 'Rule or Monitor', vManagedEntity.Path,
vManagedEntity.DisplayName
FROM Alert.vAlert AS Alerts INNER JOIN
vManagedEntity ON Alerts.ManagedEntityRowId = vManagedEntity.ManagedEntityRowId LEFT OUTER JOIN
vRule AS vRule ON Alerts.WorkflowRowId = vRule.RuleRowId LEFT OUTER JOIN
vMonitor AS vMonitor ON Alerts.WorkflowRowId = vMonitor.MonitorRowId
WHERE (Alerts.RaisedDateTime BETWEEN DATEADD(day, - 180, GETDATE()) AND GETDATE()) AND
(Alerts.AlertName like '%Hub Servers In Retry Error%') and path like '%servername%'
GROUP BY Alerts.AlertName, Alerts.MonitorAlertInd, vMonitor.MonitorDefaultName, vRule.RuleDefaultName, vManagedEntity.Path, vManagedEntity.DisplayName
ORDER BY 'Alert Instances' DESC
Regards, Blake Email: mengotto<at>hotmail.com Blog: http://discussitnow.wordpress.com/ If my response was helpful, please mark it as so, if it answered your question, then please also mark it accordingly. Thank you.

Oracle Reports doesn't show parameter form running on middle tier

I have a report that uses the parameter form. When I run it on the middle tier the report runs but without first displaying the parameter form. I am wondering if anyone can help me figure out how to get the parameter form to show when running on the middle tier. It is using OAS 9i as the application server.

Wesley,
You have to give PARAMFORM = YES if you are running through servlet
Thanks
Rajesh

Customer Receivables Aging Report doesn't show correct data

Hi Experts,
I have some problem when executing Customer Receivables Aging Report.
I'm using 8.8 PL14.
(It should be bug this is very strange ...)
I can't get same result even if I run it continuosly when I selected option "group by Customer" .
Total amount of balance due is change each time because of BP shown in the report is change.
I also got the message " Data is not available, modify selection criteria and re-enter" even though I never change selection.
During executing this report, no Invoice and JE and banking data were input.
Please advice if you know about this error or having something information.
Thanks,
Kaori Shirasuna

Hi,
The latest patch level available for B1 8.8 is PL16. it will be released on week Oct 25-29, 2010. You may directly upgrade to this latest patch level to solve the issue. If you want to try using query SQL to generate the aging report, there are some threads discussion about the query. You may search it in the SBO reporting and printing forum.
JimM

Pdf report doesn`t show cyrillic letters

Hi everyone. For generate report I begin to use Exaprom PDF https://decibel.ni.com/content/docs/DOC-10952 . But there are I find a bug. I try to insert russian letters to the pdf as text, there is no error. But when I open pdf documents, there is not any russian letters. Only English letters and numbers. Is anybody know what kind of problem is it?
Solved!
Go to Solution.

PDF Exaprom utilizes the encoding CP1252. Cyrillic is not supported. From GetFont.vi:
http://en.wikipedia.org/wiki/Windows-1252
and
http://en.wikipedia.org/wiki/ISO_8859-1
Jean-Marc
LV2009 and LV2013
Free PDF Report with iTextSharp

Report doesn't show some parts in some computers

Hello
I am currently stumped as to why one of the oracle reports that were made wont display properly on some selected computers.
The system is installed in a dedicated server and the user's computers also have installed oracle's on them, no db.
Perhaps you guys might have any idea or answer to this.
Thanks.

Its like this,
on some computers http://i75.photobucket.com/albums/i307/polarb3ar_2006/disbursement1.jpg
while this is what those computers should also display http://i75.photobucket.com/albums/i307/polarb3ar_2006/disbursement2.jpg
notice that there is a part not being displayed in the middle area of the report.
thanks

EWA report doesn't show up

Hello expert,
I'm performing an EWA setup and something strange (again) happen, i'm working on Solman 7.01 SP 27 ans all my satellite system are running on NW 7.01 SP10.
This is not my first setup so that's why it make me very angry about it, all the setup has been perform like i usually did :
- smsy (trsuted and back RFC)
- dswp --> ewa activation
- activation on satellite
- note applied in both system because of trusted rfc issue (1615861, 848146, 1491645)
But when i do the step
- run my sdccn and create a new ewa service,
- clic on the new services create and got into my satellite system
- create the new task Refresh_session and start directly
Nothing happen, meaning that, i don't have any data push to solution manager, just to clarify all the rfc works and the service preparation task has been run already.
That thing drive me crazy, do you expert have any idea if i have miss anything ?
Thank you
Regard

Hello cyferphanom
Firstly, you should not be scheduling a Refresh Session task.
You schedule the Maintenance Package task and it will schedule a refresh definition task and a refresh session task....unless it fails.
Now if you are trying to push the data to Solution Manager, this would indicate that the EWA is scheduled, and has run on
Solution manager, however since the data is overdue from the managed system, it should have a red flag.
This should be the case. If it is not, then I would suspect the EWA was NOT scheduled, or is scheuled to run in the future.
If you have a red flag it can be a problem on the Managed system, or a problem with the Service Session on Solution Mnager,
If the session on SOlution Manager has an issue, you can check by opening the sesison tree in DSA, If it opens, the issue is
on the managed system, if it fails to open, or dumps, then the issue is with the service session.
See if the session cannot be opened the refresh session task on the managed system does not return an error, it just will report there are no sessions. I am mentioning this because it is often overlooked to check the session on Solution Manager.
If you do not have a red flag, then you need to provide more information as to what is in DSWP for that system under
Solution Monitoring > Earlywatch Alert for that solution/SID.
And if you do have a red flag you may want to reviw the wiki article on the same.
Red Flag wiki : http://wiki.sdn.sap.com/wiki/x/SAObDQ
Regards,
Paul

XML report does not show grouping fields correctly??

i have an rdf report with 2 queries linked to each other and 3 groups of fields extracted from them.
i generated an XML file from this report and used it to build an RTF template file.
in my RTF template i use two groups nested. i preview it and see that the outout is correct.
then i run the report from Oracle Applications and view the output. And see that the output is wrong. All lines are repeated in every header group instead of being group.
Can ony one help me about this?
Anyone encountered this problem?

Is it absolutely the same RDF file that you run on APPS and on the desktop to try the RTF template? If so, get the XML output on APPS (by de-associating the template from the data source), save the XML output file, and then try to run the template in the template builder using the saved XML.

Administrator (ver.10.1.2.48.18) doesn't show greeks characters correctly

Hi everybody,
I re-install on my new pc, from the file as_windows_x86_bi_tools_101202.zip the following version of Discoverer Administrator: 10.1.2.48.18
I need to see both English and Greek languages and when I installed the software (from the installer) I chose both these language.
Inside the registry I have the following NLS_LANG: GREEK_GREECE.EL8MSWIN1253
So, now my problem is this: when I open the Administrator, after the credentials (login, etc...) and I try to open a business area, if this last one is written with greek characters I see black rectangles, but once opened I see the correct label in Greek.
But all the Hierarchies' and summaries' labels are black rectangles (if written in Greek) as the formulas inside the new items.....
On the file system I added the following fonts:
ALBANWTJ.ttf
ALBANWTK.ttf
ALBANWTS.ttf
ALBANWTT.ttf
ALBANYWT.ttf
under the paths:
1. C:\Oracle\Oracle_Homes\OBI_Tools_10g\jre\1.4.2\lib\fonts
2. C:\Oracle\Oracle_Homes\OBI_Tools_10g\jdk\jre\lib\fonts
3. C:\Program Files\Java\jre1.5.0_15\lib\fonts
but my problem didn't still resolve
Anybody had the same problem with another language (russian, chinese for example) ???
Any help or hint will be appreciated
Alex

Try anything here that you haven't already tried:
iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support

Could someone show me the correct way to use the Vector in the code below?

Would someone mind explaining to me why I am getting a NullPointerException when I run the code below? I initialized the vector in the constructor so it should follow through the whole class right? What would be the right way to do it?
import java.util.Vector;
public class AlumniDirectory
    private String faculty;
    private static Vector alumni;
    /** Constructor reads faculty Name and inits new vector **/
    public AlumniDirectory(String facultyIn)
        Vector alumni = new Vector();
        faculty = facultyIn;
    /** Method adds a new Alumni to the list **/
    public void addAlumnus(Object o)
        alumni.addElement(o);
    /** Method removes a Alumni from the list **/
    public void removeAlumnus(Object o)
        alumni.removeElement(o);
    /** Method searches for Alumni by last name and graduation year **/
    public void searchAlumnus(String lastNameIn, int years)
      // Code will go here eventually
    }

And probably you want a list of Alumni not a vector of Objects. So try this:
import java.util.List;
import java.util.ArrayList;
public class AlumniDirectory{
    private final String faculty;
    private final List<Alumnus> alumni = new ArrayList<Alumnus>();
    /** Constructor reads faculty Name and inits new vector **/
    public AlumniDirectory(String facultyIn)
        faculty = facultyIn;
    /** Method adds a new Alumni to the list **/
    public void addAlumnus(Alumnus alumnus)
        alumni.add(alumnus));
    /** Method removes a Alumni from the list **/
    public void removeAlumnus(Alumnus alumnus)
        alumni.remove(alumnus);
    /** Method searches for Alumni by last name and graduation year **/
    public void searchAlumnus(String lastNameIn, int years)
      // Code will go here eventually
    }-Puce
Edited by: Puce on Oct 23, 2007 7:43 PM
Edited by: Puce on Oct 23, 2007 7:46 PM

MB5B - Stock on posting date doesn't show Storage Location field

Hi All,
I run report MB5B - Stock on posting date with Stock Types = Storage Loc/Batch Stock, but the report doesn't show
Storage Location field in result.
How can I see it in this report?
Thank you very much for your kind support!
Cao Huy.

hi
what i think i sthis report is only for the OPENINGand CLOSING stock for the period or day
now whenu give SL field then system will only concider stock from that SL
the filed of SL will not be viewable in report as it is just opening and closing balance
regards
kunal

WebAnalysis graphics report doesn't show decimals in correct way

Similar Messages

Maybe you are looking for