Webarchive for several levels (clicks) down from main page

Hi there,
I would like to store at least 2 levels of webpages to browse offline, i.e. the main page and the first level of links from that page. I guess I can't do this with Safari. Is there another tool that allows me to do this?
Thanks,
Andreas

Hi Andreas,
[SiteSucker|http://www.sitesucker.us] might be able to do what you need.

Similar Messages

How do I remove the Firefox update check from main page? I have my company web setup as home page but everytime I open FF I got this annoying page in new tab

everytime I open Firefox to tabs open up one from firefox stating that my firefox is updated and behind it my company`s webpage, which I setup as home page. what`s the point of setting up this is FF will impose you the main page they want. I need a solution ASAP

You can check for problems with preferences.
Rename or delete the prefs.js file and possible numbered prefs-##.js files and a possible user.js file to reset all prefs to the default value.
*http://kb.mozillazine.org/Preferences_not_saved
*http://kb.mozillazine.org/Resetting_preferences
You can use this button to go to the Firefox profile folder:
*Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)
*http://kb.mozillazine.org/Profile_folder_-_Firefox

E71 how to remove setup email link from main page

Recently got a E71 - very pleased with it.    Have installed nokia email and exchange mail - all working fine.   I ended up with 2 "setup email" links on the main page. One i could select and hide, the other I cannot.   When ever i boot the phone it trys to start the email setup wizard by default.     I notice from installations I can remove the email setup - will this affect existing mail accounts and would this mean I can't set up any new accounts in the future?
surely there must be an easy way to remove the icon.    I tried deselcting the wizard from the Modes -> home screen application page but it just comes back after a few minutes.
very annoying.

spooky! i found the same solution today, checked back here and you'd beaten me to it!!! DOH!
posted the following elsewhere.
i found another solution for removing the email setup link on the homepage (still have the wizard start on boot).
MENU -> MODES -> HOME SCREEN APPLICATIONS ->enabled applications -> untick Intellisync
the email setup icon now dissapears on my E71.
I can't find a decent explanation of what intellisync actually does, but all my email is working as before.
To be honest i could probably just remove the set up program as I won't ever need to add another email account..
just thought I'd post this anyway."

Pass Parameter from main page to include page (subview) and read it ?

Hello All
i have an include header.jsp page in main page.jsp ,and i included it by subview.
i want to pass a parameter ex(screen name) to the subview by using f:param.
Here is the code in main.jsp:
<f:subview id="headerSubView">
<jsp:include page="/commons/header.jsp" flush="true">
<jsp:param name="screenTitleByJspParam" value="screen2007"/>
</jsp:include>
<f:param name="screenTitleByFparam" value="screen2007"/></f:subview>
Code in header.jsp
1- <af:outputFormatted value="#{param.screenTitleByJspParam}"/> -- this dose not work
2- <af:outputFormatted value="#{param.screenTitleByFparam}"/> -- this dose not work (i want this manner)
So how i can send parameter by ]<f:param and read it by subview uesing adf/jsf tags ?
Regards
Mohd.Weshah
weshah79

Dear thanassis
Thanks for you help ,your code is working successfully but my case is the following :
same your main jsp page but the subview tag in table :
<%@ page contentType="text/html;charset=windows-1256"%>
<%@ taglib uri="http://java.sun.com/jsf/html" prefix="h"%>
<%@ taglib uri="http://java.sun.com/jsf/core" prefix="f"%>
<%@ taglib uri="http://xmlns.oracle.com/adf/faces" prefix="af"%>
<%@ taglib uri="http://xmlns.oracle.com/adf/faces/html" prefix="afh"%>
<f:view>
<html>
<head>
<meta http-equiv="Content-Type"
content="text/html; charset=windows-1256"/>
<title>main</title>
</head>
<body>
<h:form>
<afh:tableLayout>
<afh:rowLayout>
<afh:cellFormat>
<f:subview id="header">
<jsp:include page="header.jsp" flush="true">
<jsp:param name="pageTitle" value="Modify aa record"/>
</jsp:include>
<f:subview>
</afh:cellFormat>
</afh:rowLayout>
</afh:tableLayout> </h:form>
</body>
</html>
</f:view>
try it the parameter dose not work ,but if you want that code work successfully move the subview out of the table.
Do you know what is the problem ?
i want give you another hint maybe it is realted to the same problem, which is in my original page the body tag is adf tag ie(<afh:body>) your code dose not work with that tag until i changed the afh:body to html body.
Regards
Mohd.Weshah

How to make menuBar UI listen for top level click

Hi,
The menubar only listen to the sub level menu item(i mean click), and I would like to make menubar listen to top level also.
for eg:
NEWS-> worldnews.
it listen the sublevel item worldnews ,i would like to make top level NEWS also.
I tried using selected index. sometimes -1 was returned when I clicked the “NEWS” item. I assume this is because it has sub-menu items.
can anyone give solution for this???????

hi Neobox75,
I have created an air application for a news website( i didnt finsh it fully) . I display the images ,news everythng using feed. I used httpservice to get the values from the feed. now my problem is if i deploy this package to the user means if he has the internet connection ...All my information wil be displayed to him as i read all the information through feed . if the network conection is not available(offline) means i have to display the previous news and images to him( if v use timer to refresh it wil be cached in user system but i dnt knw how to retreive from cache if the user is offline ).how it can be done please give the solution for it...
regards,
divya.

How do I get back the functionality for the alphabetical drop down from my previous searches in the center Google search box of the Mozilla Firefox Start Page?

In the afternoon of August 24 I lost a feature on my Mozilla Firefox Start Page and I cannot figure out how to get it back. It concerns the Google Search area in the MIDDLE of the page. Previously, when I would want to do a search, for example Amazon, I would type the letter 'A' and, because I had typed 'Amazon' in that Search box before, an alphabetical drop-down menu would come up with 'Amazon' in it. I could then click on that word without having to type the rest of it. That option is no longer working.
I had done an Adobe Reader update that Friday morning, so I thought that might be why this happened,. I did a System Restore and took the system back to Tuesday, August 21. That did not help.
I ran CCleaner and cleaned the Registry also. Interestingly enough, I found that right after I do that and then open a Mozilla Firefox Start Page, the alphabetical drop down function is back in the center Search bar for one time, one search. After that it is gone again. I go in and do just CCleaner (no Registry cleaning required) and the same thing happens...the functionality is there for one search only.
I went in and made sure all my Add-ons/Plug-ins are up to date. I also ran a full system scan but no issues came up.
I am computer illiterate, so please bear with me. I have no idea if any of the things I tried would have helped or not.
I have Windows 7 and Firefox 15.0.1
I appreciate any help you can provide.

See also:
*Tools > Options > Privacy > History: "Remember search and form history"
*https://support.mozilla.org/kb/Form+autocomplete
The "Use custom settings for history" setting allows to see the current history and cookie settings, but selecting that setting doesn't make any changes to history and cookie settings.<br />
Firefox shows the "Use custom settings for history" setting as an indication that at least one of the history and cookie settings is not the default to make you aware that changes were made.<br />
If all History settings are default then the custom settings are hidden and you see "Firefox will: (Never) Remember History".<br />

Problem in Workflow in Purchase Order for Several Level of Release Process

Hello everybody,
I have to create a workflow in which a release steps are assined by the size of amount. so in minimum 2 to maximum of 4 level approval. When the first person approves the workflow shold go to the next person. I have used the standard task TS20000166 activity in a loop and each time i'm using different user as agent. But after the first person approves and saves the activity is trminated by the first release PO from the screen. But when it loops and comes to the activity of second release, even after the release the activity is not terminating. It shows it is in process. The event of 'release' which shold have terminated the activity shows a error message in 'Display Event Trace' that "No configuration for workflow WS98000003 version 0000". But no error is shown in the workflow log.
Could u please tell how to solve this issue?? or any other way to achive the requiremnt of different levels of release based on the size of the amount?? Required solution ASAP.
Thanks & Regards,
Ajo

add loop end condition as release indicator = 'R'. Also dont forget to add the terminating event "Released" for the task you are using..
revert in case of prob
regards,
Sandeep Josyula
*Reward if helpful

Transction FBL3 called for item level drill down in GR55

Hi all,
We have a GLT0 Report in Report writer. The system correctly executes the report and displays account balance for the period. The Report calls T-code FBL3 for display of line items(report/report interface). But when we drill down, the line items are not displayed for the specific period or selection and instead displays the line items for the whole period. (upto date).
The report was copied from a different system and in the source system it was displaying the line items correctly.
Could you pl share any inputs for resolving this issue.
Thanks & Regards
Sri.

Hello
please check from which field the amount is pulled out in GLT0 table. If the amount is pulled out form the totals field ...then it might not show you what you wish to see.
Thanks
Sanjeev

Auto message determination for Freight Vendor when different from main ven

Hi All,
We have an issue with auotmatic output determination of a purchase order for a freight vendor, when the freight vendor is different from material vendor.
We are creating a PO for raw-material for vendor 'A'. In the same PO we are maintaining freight condition (FRA1/FRB1/FRC1) and for that condition we are maintinaing a different vendor (e.g Fedex). Now when we save the PO we want the system to output the PO via FAX to both the Vendors (without any manual intervention).
How can we achieve this?
Thanks in Advance
Venkat

Hi Rajesh,
Thanks for your reply.
as per my understanding, you mean to say that freight vendor has to be maintained as CR partner to the material vendor. If my understanding is correct, then the issue is that my client is not interested in maintaining Freight vendor as partner to the Material Vendor. And one more point to be noted is, most of the Purchase Orders are created automatically by MRP (Reorder point planning) . Freight vendor is maintained in the contract. MRP uses the contract as source and creates release orders.
is there any way to create new access sequence for message type NEU.so that system access the table KONV and field LIFNR to find the freight vendor.
As of now i am unable to find this table and field name in the field catalog for creating new condition table.
looking forward to hear from you soon.
Regards
Venkat

How do I have a new window open, but slowly open to full size after clicking on a link from main pag

The transitions I mean are on this site. The fading in window, and click on the image, which opens a new window but slowly to full size. http://ra1830.wix.com/qgd2012
Thanks.

The site you quoted uses a plug-in similar to 'Lightbox'. You can get it here: http://www.lokeshdhakar.com/projects/lightbox2/

[Dynamic Tabs UI Shell Template] Access AM from main page

Hi
I am using JDeveloper 11.1.2.1
I have a doubt about UI Shell Template. I'm using this template and this user data map implementation to store user preferences:
http://andrejusb.blogspot.com.es/2012/05/solution-for-sharing-global-user-data.html
I use this solution because I need to share the user language in the view layer and the BC layer (some viewObjects depend of language)
I have a use case where I need to change the user data map from a managed bean (the user changes your favorite language from UI). Because I use the UI Shell template with several BTF in ADF libraries I don't know how can I access the application modules of these BTFs or the DataControls from the managed bean in the main project that contain the home page based on the UI Shell Template.
Any suggestion will be appreciated.
Thank you

Hi User,
you need to look for customizing the UI shell template.
here are few articles may help you to customize the default UI shell template.
Techie gossip: ADF talk: customize the logo inside Dynamic Tab UI Shell
Andrejus Baranovskis's Blog: Building Custom UI Shell with ADF 11g R2

Export for PDF and items disapear from the page...

Hello Big Masters,
please give me a solution to the fact that:
I lose some items (a text box and a graphic) at the export from Indesign to PDF.
-The file is 6 pages long. Simple. Some text and small pictures.
-The missing items are close to the right bottom of the page. It is allways on the same page. In my case on the last page.
-The missing item is exactly the same like some others. (it is like an object I could put on master page, but I wanted only to COPY/ PASTE IN PLACE)
-I tried countless solutions, but no one passed successfully. I tried to ungroup/regroup (it is an object made of letters and outlined letters), I tried to outline all of the object, I tried recopy the object, I tried to put the page in a different order (thinking that the bug always came on the last page), I closed down indesign, I tried different PDF quality options, I tried renaming and overwriting, I checked all the layers (they are all printable). NOTHING worked.
I start worring about the quality of Indesign, that I thought being the perfect software for multipage layouts, but I experienced this bug that wasted me 2 hours. In the researches for solutions I also found out that more problems are ahead in big ePubs or when you bring old big files, with Masterpages, it seems that is a real mess what comes out.
Do you experience these troubles with Bermuda-effect in Indesign (dissapearing items surprisingly unexpected...)???

The answer for you is YES.
But Still didn't get the bug solved.
The first pic as you see, is from ID before I export to PDF
and the last image is the crazy pdf file, I am getting.
If the adobe guys need my file for investigation, I can send it to them somehow.
But then again, I got a compromise solution by putting the "missing" object on a separate masterpage.

Prime Infrastructure 2.0 Link-Down Alarm severity level

Hi,
i have been looking for a way to lower the severity level of link-down Alarms. I use the threshhold utilization feature and want to generate an alarm when CPU or Memory goes over 90%, this works fine. Problem is that when you enable "Switches and Hubs" or "Routers" category to receive alarms under: Operate -> Alarms & Events -> Email Notifications, you define only Critical alarms should generate an email and Link-down is by default Critical.
Well you figure that you should be able to change this, but i can't find anything to change the severity under: Administration -> System Settings -> Severity Configuration.
Do anyone know if this is even possible? If so please tell me how..

Hi,
Yes it is possible.
Changing Alarm Severities
You can change the severity level for newly generated alarms
Note Existing alarms remain unchanged.
To change the severity level of newly generated alarms:
Step 1 Choose Administration > System Settings .
Step 2 Choose Severity Configuration from the left sidebar menu.
Step 3 Select the check box of the alarm condition whose severity level you want to change.
Step 4 From the Configure Severity Level drop-down list, choose the new severity level ( Critical , Major , Minor , Warning , Informational , or Reset to Default ).
Step 5 Click Go, then click OK.
Check the attached screen shot ..
Thanks-
Afroz
***Ratings Encourages Contributors ***

Several CRUDLs again: App from existing table Form on table with report?

Hi,
I posted a message a couple of days ago, asking if it was possible to automatically generate several CRUDL gui patterns per application. Later I answer myself discovering that the "Form on table with report" option for creating a page, make just that.
However, I can see that the option for application level CRUDL (app from existing table) has more functionality (search, export to excel, data analysis, even charts, cool ;-). It creates about 10 pages per table, contrasting with the two created by the "Form on table with report" option. I thought that "Report with form" could be the answer, but it seems just another link to the same option.
So, once again: is possible to call the functionality of "App from existing table", several times within the same application? (of course each time is likely to refer a distinct table). How do I insistently ask for this? Well, cause I can see in my horizon many applications what will entirely consist of table-maintenance services ... so, with htmldb I could generate them very fast!. In fact, once I have toasted my crudl pattern I would even like to save it and generate the applications on a non interactive basis (maybe calling something in pl/sql?, command line?) ... is that possible?
Thanks in advance,
salu2
dario estepario ..

Hi Scott,
Dario - The "create application from existing table"
functionality was available in 1.6. In 2.0, the
Create Application wizard has changed. But you can
create as many sets of pages in the same application
as you need, all on different tables, using the
patterns available in that wizard. You can also
supplement those generated pages later by creating
chart pages or whatever else you need.Mmm?, ups ... them am I running the 1.6 version? I installed it from the companion cd. Ok, I'll try the separately distributed htmldb version. Thanks.
>
At present there is no exposed API to let you do any
of this programmatically.;-(
>
ScottRegards,
dario estepario ...

Z10 - No Data Network Connection for Several Android Apps

Hi,
I'm using freshly installed 10.2.1.2102 software on a BlackBerry Z10 (STL100-3).
Everything runs smoothly except for several Android Apps dwnloaded from Snap or Onemobile. They work perfectly fine over WiFi but not at all over Data. Does anyone know why or if there is a solution? It's pretty frustrating.
Examples include, NetFlix, MyFitnesspal, Amazon Price Check Urbanspoon, etc.
Thanks for any replies.

you can hard restart you device. and try again
Ades Ganteng

Webarchive for several levels (clicks) down from main page

Similar Messages

Maybe you are looking for