WebAS Instance Profile file

Hi,
I am using CE 7.1.Where i can find the WebAS instance profile files?
Thanks& Regards,
Sudhir

When ever you change the parameters (at SAP level), there is version management. Before creating a new version of the parameter file,
the older version of the file is saved in the profile directory with an extension of .BAK
incase, you need to revert back to the old values, then:
1. Save the latest version of the parameter file with a different name
2. Rename the .BAK file to parameter file name
3. Start the SAP system.
Regards,
Ammey Kesarkar

Similar Messages

I corrupted the firefox profile file using profile manager and firefox thinks it is still running and asks me to close but there is no instance of it running...I have tried several re-installs but cannot resolve the problem....

.........I have deleted the .ini file associated with the profile file and the profile file itself...have tried to locate the "lock" file but cannot find the file in the specified path on the support forum for this problem....I believe there is a file mounted in another directory somewhere that firefox is seeing....I would really like to be able to use firefox as the default browser on this new linux (ubuntu) install...it was working prior to my trying to import my profile from the windows partition.....

See this. <br />
https://support.mozilla.com/en-US/kb/Firefox+hangs#Hang_at_exit

Empty line at the end of SAP Java instance profile

I saw this today in help.sap.com, which says that an Java instance profile must have an empty line at the end of the file, would anyone know what is it for ?
The instance profile (/usr/sap/<SID>/SYS/profile/<SID>_<instance name>_<hostname>) u2013 this file contains settings that apply to the instance as a whole. For a Java-only installation, the file can be edited with any text editor (beware that the file must have an empty line at the end.);
http://help.sap.com/saphelp_nw04s/helpdata/en/2e/611724f410254ca12a3f396ec5ae85/frameset.htm
thank you
Jonu Joy

I have heard many "explanations" for this, but never really any solid answers.
From experience, however, I can tell you that the SAP profiles (both ABAP and Java) will miss the last parameter if it is located on the bottom line of the file. I have always put in two or three blank spaces at the bottom of the profiles in order to avoid this.

ECP CI Start and Instance Profile not showing in RZ10

Hi,
I am not able to access or view our ECP Central Instance Start and
Instnace profile for ECP CI Instance in RZ10 , I do not see the start
and instance profile for ECP CI Instance. However, I do see start and
instance profiles for APP1 and APP2 instance, but just not CI instance.
So, when I try to re-import the profiles I get the below error message.
I wanted to check if it is access related, so, I logged on the the ECP
CI Server physicall and had tried to accessed the ECP
CI Server and try to access the below path from start --> run -->
SAPGRPPRD\sapmnt\ECP\SYS\profile\ECP_DVEBMGS02_ECC-Prod-CIS and
SAPGRPPRD\sapmnt\ECP\SYS\profile\START_DVEBMGS02_ECC-Prod-CIS and it
works. But the profiles are not being read
From ECP CI RZ10. Can you please advise why this is not showing.
Error Message when i try to import the profiles:
Log for the import of profiles
Instance profile
SAPGRPPRD\sapmnt\ECP\SYS\profile\ECP_DVEBMGS02_ECC-
Prod-CI Could not be read. The import is therefore not possible.
Start profile
SAPGRPPRD\sapmnt\ECP\SYS\profile\START_DVEBMGS02_ECC-
Prod- Could not be read. The import is therefore not possible.
Instance profile
SAPGRPPRD\sapmnt\ECP\SYS\profile\ECP_DVEBMGS02_ECC-
Prod-CI Could not be read by file; Therefore could not be checked.
(Server = ECC-Prod-CIS_ECP_02 )
Please advise?

Hi,
I logged on the the ECP
CI Server physicall and had tried to accessed the ECP
CI Server
as per above statment you have login to CI and try to call CI proifle file manually. then can you tell us why this both the host name are different.
SAPGRPPRD
ECC-Prod-CIS
Thanks
Anil

Can LR Web module converting file name hyphens into underscores be disabled

Hi,
I have problems when creating webpages from within LR.
First I develop the RAW files and converts them to jpegs. Under Lightroom 3 I use the following settings under "Export location":
Export to: Specific Folder
Add to This Catalog: ticked
Existing Files: Choose a new name for the exported file
This is thus native Lightroom. For existing files the new filenames are generated with a hyphen follwed by a numeric suffix. as follows: for FileName.jpg this would be FileName-2.jpg, FileName-3.jpg.
Afterwards I use the web module with the TTG Highslide Pro plugin to generate the webpages. For each image on the page there is a link to the original image to download it. It is here where a problem occurs. With the above mentioend naming convention (adding a hypen when files do already exist) there is no problem at all to display the photos nor as a tumbnail, nor in the slideshow.
When trying to download the high resolution image however a problem occurs. The file can't be found. This is due to the hyperlink pointing to filenames like FileName_2.jpg and FileName_3.jpg. As the image itself is having a hyphen followed by a numeric suffix it can't be found when the link is pointing to that file using an underscore instead.
So to me that's a little problem as I am not at the steering wheel at any of the two moments where a naming convention is applied; the automatic filename generation at time of export from Lightroom and the change of the hyphen to the underscore when generating the webpage.
Any Idea how this can be solved? Or having an underscore used by the automatic naming in Lightroom, or using the hyphen (leaving the filename as it is) when generating the webpage with the LR web module.
I posted that question already at the TTG forum and got the following respnse from Matthew: "Lightroom's Web module converts file name hyphens into underscores. It's not something I have any control over at all."
Any help would be appreciated.
Kind regards,
Patrick

I have the same problem in that filenames created with (for instance) photographer-place--year_month_day-filename.cr2 are exported by Lightroom 3.4.1 correctly, without change, into jpg versions, but TTG Highslide Gallery Pro (or, rather, Lightroom) forces a conversion eliminating the dashes and replacing them by underscores. TTG states on its website that this is unavoidable in the Lightroom web module, and recommends entering one's wishes in the "File Handling" tab within Lightroom Preferences.
However, my LR preferences include the standard File Name Generation option "Replace illegal file name characters with: Dashes (-)" so this would indicate that a dash is not regarded by Lightroom as illegal and therefore should be left alone. As is in fact the case on a normal export from a raw cr2 to jpg: no change in Lightroom and therefore no problem. But export via LR via TTG causes an unwanted conversion from dashes to underscores.
While searching the web I came across this old post http://thephotogeek.com/ttg-web-gallery-client-selections-lightroom/
which mentions the question as a LR2 bug.
I then exported a web gallery using LR's standard web template and here too all file names are converted from dashes to underscores, despite what is entered in LR's preferences. So my conclusion is that this remains a LR bug, and no fault of TTG.
I am delighted with TTG and couldn't do without it, but am still stuck with this issue which shouldn't need to be an issue at all, if only LR would leave things alone.

Web Service mapping file

You will be greatly appreciated if you can help me on following question:
In a web service mapping file, under <java-xml-type-mapping> element, either <anonymous-type-qname> or <root-type-qname> is valid element according to schema. My question is which one should be used under which situation?
Thanks,
Michael
===========
Mapping file
===========
<java-wsdl-mapping xmlns="http://java.sun.com/xml/ns/j2ee"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee
http://www.ibm.com/webservices/xsd/j2ee_jaxrpc_mapping_1_1.xsd"
version="1.1">
<package-mapping>
<package-type>test</package-type>
<namespaceURI>http://test/</namespaceURI>
</package-mapping>
<java-xml-type-mapping>
<java-type>test.Status</java-type>
<anonymous-type-qname>{http://test/}Status</anonymous-type-qname>
<qname-scope>complexType</qname-scope>
==========
Schema
==========
<xsd:sequence>
<xsd:element name="java-type" type="j2ee:java-typeType">
<xsd:annotation>
<xsd:documentation>The java-type element is the fully qualified class name of a Java class, primitive, or array type.</xsd:documentation>
</xsd:annotation>
</xsd:element>
<choice>
<xsd:element name="root-type-qname" type="j2ee:xsdQNameType"> <xsd:annotation>
<xsd:documentation>The root-type-qname identifies the WSDL QName of an XML type.
</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="anonymous-type-qname" type="j2ee:string">
<xsd:annotation>
<xsd:documentation>The anonymous-type-qname identifies the WSDL QName of an anonymous XML type.
</xsd:documentation>
</xsd:annotation>
</xsd:element>
</choice>

I am stuck here with the same problem - don't know what to do with the (required) Mapping File.
Has anyone found out?
Please let me know.
Best,
Philipp
[email protected]

How to create a web instance in weblogic?

          Dear All,
          I want to know how to create a web instance in weblogic server?
          Furthermore , where can i get more info. about the weblogic
          server , including how to use those examples pages provided from
          weblogic server, sampling of procedure to config each service ,
          e.g EJB , JSDB , JTA , etc., .
          thanks,
          chris


Read the new JSP1.1 and servlet 2.2 specific for more information on
          this. You can deploy several jsp files in a single war file on a server.
          -- Prasad
          chris lee wrote:
          > Dear Prasad Peddada
          > Thank you for your helpful information.
          > I've read the page you have mentioned, I want to know
          > if I've serval pages written in jsp, how should I do if I
          > want to access those pages under the weblogic server?
          > Furthermore, Does the 'applicantion' mention in the paragraph
          > is the web instance I mentioned before?
          >
          > Thanks,
          > chris
          >
          > Prasad Peddada <[email protected]> wrote:
          > >http://edocs.beasys.com/wls/docs60/index.html
          > >
          > >-- Prasad
          > >
          > >chris lee wrote:
          > >
          > >> Dear All,
          > >> I want to know how to create a web instance in weblogic
          > >server?
          > >> Furthermore , where can i get more info. about the weblogic
          > >> server , including how to use those examples pages provided
          > >from
          > >> weblogic server, sampling of procedure to config each
          > >service ,
          > >> e.g EJB , JSDB , JTA , etc., .
          > >>
          > >> thanks,
          > >> chris
          > >
          Cheers
          - Prasad

No instance profile found

Hi all,
After Kernel Upgrade the following error occurs by starting sap :
no instance profile found
Thanks for your help
Regards

Hi,
1. Please navigate to the path where your instance profile is located and ensure that instance profile is available physically there.
=> Profile SID_DVEBMGS00_hostname is physically there under /sapmnt/SID/profile. Start and Default profiles are als there.
2. Validate that it has proper permission.
=> Permissions are 644
3. Check the PATH variable of user <sidadm> and ensure that it has entry for the FS location that contails the profile parameter file.
=> Also OK
Thanks
Best Regards

Replace Profile Files -- Restart Fails

Dear all
We're on SAP Netweaver2004s, having following issue:
The Profile Files (Default/Start/Instance) have been deleted and recreated with other names in RZ10. Saving and activating was fine, but after restart of the server, the instance is no longer showing up in the mmc, it seems that the profile files are not assigned properly.
Where can I check and change which profile is used for the start of the mmc?
Any help is appreciated.
Regards,
Silvio

hi shyam
thank you for your reply.
i copied some old profiles into the profile folder, booted the server and started the mmc again. I was able to start all the instances with the old profile.
In TA RZ10 I was able to edit all the profiles, save and activate them. Although the check did not show some errors, I can not restart the instance with this newly safed profile, even if I did not change any profile parameter.
The dispatcher on the instance returns the followin trace file:
trc file: "dev_disp", trc level: 1, release: "700"
sysno      01
sid        P86
systemid   560 (PC with Windows NT)
relno      7000
patchlevel 0
patchno    41
intno      20050900
make:      multithreaded, ASCII, optimized
pid        3268
Tue Dec 12 14:50:05 2006
kernel runs with dp version 210(ext=109) (@(#) DPLIB-INT-VERSION-210)
length of sys_adm_ext is 360 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (01 3268) [dpxxdisp.c   1227]
     shared lib "dw_xml.dll" version 41 successfully loaded
     shared lib "dw_xtc.dll" version 41 successfully loaded
     shared lib "dw_stl.dll" version 41 successfully loaded
     shared lib "dw_gui.dll" version 41 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3901
Tue Dec 12 14:50:10 2006
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5227]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpShMCreate: sizeof(wp_adm)          20240     (880)
DpShMCreate: sizeof(tm_adm)          3363936     (16736)
DpShMCreate: sizeof(wp_ca_adm)          18000     (60)
DpShMCreate: sizeof(appc_ca_adm)     6000     (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
DpShMCreate: sizeof(comm_adm)          528048     (1048)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm)          0     (72)
DpShMCreate: sizeof(vmc_adm)          0     (1208)
DpShMCreate: sizeof(wall_adm)          (22440/34344/56/100)
DpShMCreate: sizeof(gw_adm)     48
DpShMCreate: SHM_DP_ADM_KEY          (addr: 04AC0040, size: 3999776)
DpShMCreate: allocated sys_adm at 04AC0040
DpShMCreate: allocated wp_adm at 04AC19D0
DpShMCreate: allocated tm_adm_list at 04AC68E0
DpShMCreate: allocated tm_adm at 04AC6910
DpShMCreate: allocated wp_ca_adm at 04DFBD70
DpShMCreate: allocated appc_ca_adm at 04E003C0
DpShMCreate: allocated comm_adm at 04E01B30
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 04E829E0
DpShMCreate: allocated gw_adm at 04E82A20
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 04E82A50
DpShMCreate: allocated wall_adm at 04E82A58
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
MM diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 1023 blocks reserved for free list.
ES initialized.
ERROR => DpAsCreate: CreateProcess (3: No such process) [dpntdisp.c   467]
***LOG Q0I=> DpAsCreate, CreateProcess ( CreateProcess 3) [dpntdisp.c   469]
Memory diagnostic                                 *
Systeminformation
Processor-Typ             : Intel Pentium Pro
Processor-Count           : 4
Operating System          : NT 5.2, Build 3790
Service Pack              : Service Pack 1
NT Pagefile Informations
Config. minimum size      : 14458880 K
Config. maximum size      : 14458880 K
Avail. maximum size      : 14458880 K
Num
Pagefile
Min.Size
Max.Size
Avail.Max
Curr.Size
1
c:\pagefile.sys
5242880 K
5242880 K
5242880 K
5242880 K
2
e:\pagefile.sys
9216000 K
9216000 K
9216000 K
9216000 K
NT Task Manager Informations
Total Handles             : 538976288
Total Threads             : 538976288
Total Processes           : 538976288
Commit Charge Total       : 2361912 K
Commit Charge Limit       : 18480832 K
Commit Charge Peak        : 2361912 K
Phys.Memory Total         : 71100520 K
Phys.Memory Available     : 2083791183 K
File Cache                : 4028416 K
Kernel Memory Total       : 71100592 K
Kernel Memory Paged       : 2083845724 K
Kernel Memory Nonpaged    :       19 K
Memory usage of current process
Total virt.address space : 2097024 K
Avail.virt.address space : 1047524 K
Private Pages             :        0 K
Total heap size           :    10366 K
Virtual memory regions    :        0 K
Uncommitted heap memory   :     5652 K
Allocated heap memory     :     4594 K
Moveable heap memory      :        0 K
DDE shared heap memory    :        0 K
Memory usage of all processes
PID
Image
Instance
Work.Set
WS Peak
Priv.Pages
PP Peak
Pg Fault
1216
sapstartsrv.exe
22604 K
22604 K
22352 K
22352 K
5
2480
msg_server.EXE
[MS] P86_00
6076 K
6076 K
7668 K
7668 K
1
2504
enserver.EXE
[**] P86_00
13672 K
13672 K
54404 K
54404 K
3
3220
msg_server.EXE
[MS] P86_01
5428 K
5428 K
6168 K
6168 K
1
3268
disp+work.EXE
29652 K
29716 K
45732 K
45836 K
7
3232
igswd.EXE
[**] P86_01
2752 K
2988 K
1528 K
1788 K
0
Sum
80184 K
137852 K
Tue Dec 12 14:50:11 2006
DP_FATAL_ERROR => Gateway could not be started - I better exit now
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1557
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Dec 12 14:50:21 2006
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long)               Tue Dec 12 13:50:21 2006
========================
No Ty. Pid      Status Cause Start Err Sem CPU    Time Program Cl User         Action                    Table
0 DIA       -1 Run           no      0   0             0
1 DIA       -1 Run           no      0   0             0
2 DIA       -1 Run           no      0   0             0
3 DIA       -1 Run           no      0   0             0
4 DIA       -1 Run           no      0   0             0
5 DIA       -1 Run           no      0   0             0
6 DIA       -1 Run           no      0   0             0
7 DIA       -1 Run           no      0   0             0
8 DIA       -1 Run           no      0   0             0
9 DIA       -1 Run           no      0   0             0
10 UPD       -1 Run           no      0   0             0
11 UPD       -1 Run           no      0   0             0
12 ENQ       -1 Run           no      0   0             0
13 BTC       -1 Run           no      0   0             0
14 BTC       -1 Run           no      0   0             0
15 BTC       -1 Run           no      0   0             0
16 BTC       -1 Run           no      0   0             0
17 BTC       -1 Run           no      0   0             0
18 BTC       -1 Run           no      0   0             0
19 BTC       -1 Run           no      0   0             0
20 BTC       -1 Run           no      0   0             0
21 SPO       -1 Run           no      0   0             0
22 UP2       -1 Run           no      0   0             0
Dispatcher Queue Statistics               Tue Dec 12 13:50:21 2006
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
0
2000
0
0
--------++++--
+
DIA
0
0
2000
0
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id          0
wake_evt_udp_now     0
wake events           total     0, udp     0 ( 0%), shm     0 ( 0%)
since last update     total     0, udp     0 ( 0%), shm     0 ( 0%)
Dump of tm_adm structure:               Tue Dec 12 13:50:21 2006
=========================
Term    uid man user    term   lastop mod wp ta   a/i (modes)
Workprocess Comm. Area Blocks               Tue Dec 12 13:50:21 2006
=============================
Slots: 300, Used: 0, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1557
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Dec 12 14:50:26 2006
NiISelect: TIMEOUT occured (5000ms)
Shutdown server ...
DpJ2eeDisableRestart
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
[DpWpDied] W0 handle not set (PID:-1)
[DpWpDied] W1 handle not set (PID:-1)
[DpWpDied] W2 handle not set (PID:-1)
[DpWpDied] W3 handle not set (PID:-1)
[DpWpDied] W4 handle not set (PID:-1)
[DpWpDied] W5 handle not set (PID:-1)
[DpWpDied] W6 handle not set (PID:-1)
[DpWpDied] W7 handle not set (PID:-1)
[DpWpDied] W8 handle not set (PID:-1)
[DpWpDied] W9 handle not set (PID:-1)
[DpWpDied] W10 handle not set (PID:-1)
[DpWpDied] W11 handle not set (PID:-1)
[DpWpDied] W12 handle not set (PID:-1)
[DpWpDied] W13 handle not set (PID:-1)
[DpWpDied] W14 handle not set (PID:-1)
[DpWpDied] W15 handle not set (PID:-1)
[DpWpDied] W16 handle not set (PID:-1)
[DpWpDied] W17 handle not set (PID:-1)
[DpWpDied] W18 handle not set (PID:-1)
[DpWpDied] W19 handle not set (PID:-1)
[DpWpDied] W20 handle not set (PID:-1)
[DpWpDied] W21 handle not set (PID:-1)
[DpWpDied] W22 handle not set (PID:-1)
Stop work processes
Terminate gui connections
wait for end of work processes
detach from message server
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 3268) [dpxxdisp.c   9983]
Good Bye .....
Any idea?
Regards,
Silvio

Auto installation of Web instance or server

The issue is to create web instance or add server thru command line but not thru web forms in iplanet web server on solaris machine.
If you look at the /opt/iplanet/webservers/bin/https/admin/bin directory. And type ./install.
Then it will give the syntax of adding an serverid with a different port etc like the web interface that comes with iplanet. I was trying this and could not get the instance creation, as well I was getting the error as mentioned below
./install -s xyz.mydomain.in -p 9007 -i srini -u username -d $a
Segmentation Fault - core dumped
where $a is the variable with the document root.
Anybody who has already implemented this can they get back to me as its very critical to me. If the method that i have mentioned is not correct, can somebody out there can tell me how to go about.
Srinivas

All, Thanks for replying
Please find below answer to some of your quries.
1) Yes, This is ABAP only installation.
2) The database is oracle and the file systems on database server are as per SAP standard.
So as per Sunny,
Only way forward is to install the database instance using system copy method of back restore.
I have a mail from my senior, saying
"Normally, sapinst should sense database, SAPERP schema owner and you should be all set.
If that does not happen, as soon as sapinst pauses - so you may continue with Oracle Universal Installer in a different window
,you should STOP (abandon) the Database Instance install phase."
Here is the query.
1) "you should STOP (abandon) the Database Instance install phase."
I am not sure how to stop OR abandon the database instnace install phase. Do anyone knows this?
Thanks fore your reply
Regards

Cange instance profile of NW04s Java only

Hi,
is there a tool to edit the instance profile like TA RZ10 (ABAP instance) or has this to be done on file level with texteditor.
Thanks for reply
Harald

Hi,
I also don't know where such a tool is. But regarding the igs/listener/http parameter:
there is one HTTP listener defined by default with value http://<host of your system>:4<instance number>80.
You can run:
on Windows:
[code]$(DIR_EXECUTABLE)/igswd.exe -showconfiguration pf=<path to your instance profile>[/code]
on Unix:
[code]$(DIR_EXECUTABLE)/igswd_mt -showconfiguration pf=<path to your instance profile>[/code]
to see the parameters that are specified for the IGS. This works with IGS 7.00 patch 3 and higher.
Best regards
Matthias
Message was edited by:
Matthias Gemmel

How can I get bookmarks moved to a new laptop when my old broken laptop can no longer launch Firefox but does still allow access to all of the Profile files such as places.sqlite

My old laptop appears to be a victim of Bit Rot according to an IT person who was here helping me. All of the support material I've seen so far related to moving bookmarks from one computer to another seem to assume that Firefox can be launched on the old computer (which can't be done in my case). I'd like to figure out how to use the files which may hold my extensive bookmark data while the old computer is still allowing me to access those files and save to a removable thumb drive.

Fortunately I seem to have found and still have access to the old Profile files you're mentioning but I don't know how to make use of them such that Firefox on my new computer can incorporate all the data they hold. Again, I'm not able to open Firefox on the old computer. Any ideas how to use these .sqlite files on the new computer to get myself operable how I had been w. Firefox on the old broken one?

ITunes no longer loads after updating to Windows 8.1. I have tried every corrective step I've found on the web (reinstall, copy files, change permissions, etc.) nothing helps. Has anyone heard if Apple is working on fix?

Itunes does not launch after updating to Windows 8.1. I've tried every suggestion I can find on web (reinstall, copy files from other directories, change permissions, etc.). Nothing works. At best I can get the licensing agreement to show and then nothing. Has anyone heard if a fix is in the works?

Hi 3backpacker3,
It sounds like you are on the right track in troubleshooting this issue. If you are having launch issues, you may find the following article helpful:
iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
http://support.apple.com/kb/ts1717
Regards,
- Brenden

Changing language in instance profile

Hi,
In which client we change the language of the instance profile in RZ10?
We have english and deutsh languagges marked in configuration of our instance profile and we want to add french language.
Best regards
Zied

Import of language
( SAP Sign = ?, see table T002)
1. Append language sign ? to parameter
zcsa/installed_languages of the instance profile and
restart the instance.
2. in Client 000, Transaction SMLT for Classifying the
Language and Language Import from the CDs.
1. Classification
SMLT->Language->Classify:
Language = French,
CLick "Save".
2. Import
SMLT->Click in the row for French the icon
"Import package"
General data:
Path = "mount point for CD" -> Click on
"Find Packages"
Available packages:
Select the package which should be imported
Start details:
Select "Start immediately", click on "Execute" and
confirm following pop-ups.
3. Check the status of the language import and check if the
log on with log on language French is possible.
Language status:
SMLT->open the subfolder "Imported packages" in the
row for French.

Web browsing and file downloads stops

Hi Guys,
I've been looking at a few posts but not seen the answer yet. I'd be grateful if someone could help me out or point me in the right direction.
I had BT Infinity 2 installed with the HH5 on Friday. I have problems with browsing web pages. When I click a link most of the time the page loads quickly without issue, but then occassionally the page wont load and the page will 'stick'. It sometimes take 30-60 seconds for the page to fully load, or there is a timeout. Usually, by reloading the page it resolves this and the page loads really quickly again but within a minute you will have the same issue.
Also, I have downloaded a few files, from 300mb to 1gb. Just like web browsing, the file download will stop and the only way to resume the download is to reboot the HH5. I had to reboot the HH5 five times to download the full 1gb file. I checked the connection and it's not dropping so I wonder why the connection just stops or sticks for a while.
I know it can take a while for the connection to settle down but it shouldn't stop working.
Am hoping someone could help me out with this as i need this for my business.
With thanks,

I would leave it alone for the next few days and do not keep restarting the Homehub. This will cause DLM (Dynamic Line Management) to kick in and lower your speeds because it will interpret the restarts as a fault. It is normal for the speeds to fluctuate during the training period. If things do not improve after the ten day training period post back for more advice.

WebAS Instance Profile file

Similar Messages

Maybe you are looking for