WEBAS Java Technical system

Hi all,
Could you please give me an example of an application for which we would need to create WEB AS JAVA technical system?
Regards,
Ashish

Hi,
Could you please give me an example of an application for which we would need to create WEB AS JAVA technical system?
In case of java proxies,u will create java proxies from interfaces in IR.
But u would need some java application which will call methods of those java proxies,these proxies can be called using EJBs in java application.
You will create EJBs from thses proxies and then use one java application to call these EJBs.
When this java application gets executed it sends proxy message to XI,XI identifies this message with the help of technical ystem which should be of type WEBAS JAVA,because the server on which u deploy ur JAVA application is of type WAEAS JAVA.
So u need to create WEBAS JAVA technical system to send message from JAVA proxies.
Thanks.

Similar Messages

Define Web AS JAVA Technical System in SLD

I deleted WAS JAVA Technical System in SLD by mistake.
Later I've tried to redefine the it in technical system landscape, but some technical information such as URL, host, database, instance disappeared.
Is there a special steps to define WAS JAVA technical system?
Thanks

Please send me a mail to [email protected] , I will send you the page (in bmp format) with all the definitions...
Hope it will help you

AS JAVA technical system not updated/registered in SLD

Hi,
We have setup the SLD bridge connection from our SLD with 7.0 SAP J2EE
server which is our local SLD to SLD with 6.40 SAP J2EE server which is the master or central SLD. Actually we have this set up, that we have configured a local SLD for our Netweaver 2004s SR2 or Netweaver 7.0 system and connect it to the central SLD which is also a Netweaver system but of lower release, Netweaver 2004 SR1.
Since Netweaver contains both ABAP and Java, I can see that our WAS ABAP technical system (of the SLD 7.0) was
succesfully registered and updated on the central SLD 6.40 but I cannot
register or update the WAS JAVA technical system (of the SLD 7.0) in the central SLD 6.40, but it can be updated in our local SLD which is then connected to the central SLD as mentioned.
Since my update for the WAS ABAP was already working and its updated
in the central SLD 6.40, what can we do to achieve the same result for the WAS
JAVA? Because if it works with WAS ABAP, what is wrong then with WAS JAVA? What might be the cause or some other configurations to be made?
Also can we synchronize the CIM updated with all the SLD? We want to
see if we can just update the CIM content of SLD 6.40 and pushed this
with the other SLD on the system e.g. SLD of 7.0.

Hi,
I think you should certain configurations for your system to be listed under SAp Java systems.
1.Go to visual admin,c:\usr\sap\SID\JCxx\j2ee\admin
run go.bat.
Then go to services-----SLD Data supplier.
go to Http settins under that,enter the details of central SLD you want to connect,
hostname,http port,sld admin user and password.save it.
go to CIM client settings,enter the same details there and save.
Then check CIM client generation test.it should be sucessfull.
then trigger SLD data transfer at the top left corner.
it also should be sucessfull.
Then your system will be listed.
2.may be you have to create a role called Lcr administrator with all Lcr* actions assigned to it.
then this Lcr administrator role should be assigned to ur administrator user.
hope this works.........
reward points if helpful............

Problem while creating WebAS ABAP Technical System in WAS 7

Hi All,
I have installed WAS 7 and EP 7 SP9 as part of SR2 Installation. I had checked the option configure local SLD. I have to create and SLD to conenct EP to ECC 6.
When I was creating the Technical System, at the last step i found out that ECC 6 was not available in the installed products(only ECC 5 was available). So i Upgraded CR Content to SAP_CR 3.2 and CIM to 1.5.20. When I am trying to create the Technical System again I do find ECC 6.0 in the Installed Products but there are no corresponding Installed Components for ECC 6.(The same exists for ECC 5). as a result I am not able to create the Technical System as atleast one component has to be selected. I have tried re importing the CIM Model and cr content again but its not working.
When I select SLD Data Supplier in Visual Admin I get the following error message.
Error While loading service SLD Data Supplier
java.lang.ClassNotFoundException: com.sap.sldserv.vaclient.ClientManagement
Is there any solution to this. Points will be given.
Regards,
Shyam.
Message was edited by:
Shyam R Nair

hi,
use th following thread,
No products installed while adding a Technical ABAP System in the SLD.
Regards
Jayapriya

Webas JAVA in SLD

hi friends,
one month back i have created webas java technical system.it's working fine..but right now it's not working...how would we find out the error and how to test that particular technical system...plz give me answer ASAP..
regards,
venu

Hi Venu,
For SLD error .
First check ur admin password ,if it expired create new password and give the new password in visaul admin,SLD supplier.
and test the connection .
Sld errors r related to admin password expirations.
Surekha.

Creating technical system Web As java

Hi All
I am creating a new technical system Web As Java in SLD.Can anybody please tell what "Installed Products" I need to select to create the system
Regards
Pawan

Hi
If ur creating a new Web AS Java technical system...I hope u would have already defined the corresponding software components and the product for that particular system...U should add this product which was created.
Hope i got it right..Do let me know if u have further queries
Regards
Krishna

Business System and Technical System ??

Hi Experts,
Please tell, What is the Technical System and Business System. How many Technical and Busniess Systems do we have in XI ?
Early responses are welcome.

Hi,
Business systems:
Business systems are logical systems, which function as senders or receivers within PI. Business systems can be SAP systems or third-party systems.
Depending on the associated technical system, the following types of business systems are defined in the SLD:
Web AS ABAP:
A business system, which is associated with a Web AS ABAP.
A business system, which is associated with a Web AS ABAP, can play the role either of an application system or an integration server. An integration server is the central component of PI, which provides a framework for the exchange of information among various internal and external entities of a company. The integration server facilitates the interaction between the different operating systems and applications across internal and external networks.
Web AS Java:
A business system, which is associated with a Web AS Java.
Standalone:
A business system, which is associated with a standalone Java application.
Third-party:
A business system, which is associated with a third-party technical system.
Technical systems:
Technical systems are application systems that are installed in your system landscape. An example of an application system is a Customer Relationship Management (CRM) server. In the SLD, there are five types of technical systems:
Web AS ABAP:
Web AS ABAP technical systems, ranging from any SAP system to an APO server or CRM server, are based on the same Basis Component (BC), which includes the ABAP interpreter, ABAP Dictionary, ABAP Workbench, and so on. A dedicated database, which stores most of the data of the BC and the application components, is associated with the system.
Web AS Java:
Web AS Java systems consist of one or more instances and each instance is installed on a separate host. An instance itself consists of cluster nodes that can communicate with each other.
Standalone Java:
Standalone Java technical systems are standalone Java applications that are installed in a computer system from an administration perspective. They can also be installed as an operating system service or as a daemon.
Third-Party:
Third-party technical systems contain third-party software components and products.
Regards,
Prakasu

Difference between different Technical systems

Please tell
We can define a technical system as :
Web AS ABAP or Web AS JAVA or Standalone JAVA or Third party or
Exchange Infrastructure
What is Web AS ABAP system? What is Web AS JAVA system? What is standalone JAVA?
Thanx in advance
Harsh

Hi Harsh
Web AS ABAP
Web AS ABAP technical systems, ranging from any SAP system to an APO server or CRM server, are based on the same Basis Component (BC), which includes the ABAP interpreter, ABAP Dictionary, ABAP Workbench, and so on. A dedicated database, which stores most of the data of the BC and the application components, is associated with the system.
Web AS Java
Web AS Java systems consist of one or more instances and each instance is installed on a separate host. An instance itself consists of cluster nodes that can communicate with each other.
Standalone Java
Standalone Java technical systems are standalone Java applications that are installed in a computer system from an administration perspective. They can also be installed as an operating system service or as a daemon.
Third-Party
Third-party technical systems contain third-party software components and products.
Third-party systems are not automatically registered in the SLD. Therefore, you have to create them manually by creating:
Third-party products
Third-party software components
Third-party technical system
Third-party business system
Exchange Infrastructure (XI)
XI technical systems are the infrastructure systems (such as integration servers and adapter engines) of XI.
Cheers...
VAsu
** REward POints if found useful **

Creating Technical System while using SOAP adapter as sender

hello friends
When I create a business system and technical system in SLD for a sender using SOAP adapter, can i create it as Third-Party. Or do I need to create it as anything else in the list.
Also, when do we create Web AS Java technical systems. I need to know when this option becomes MUST.
Thanks in advance
Ram

Yes u can use third party business system and technical system for SOAP system. Business service can also b used for the same purpose.
U should use webAS Java system in case of Java Proxies
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/7d4db211-0d01-0010-1e8e-9b07fc2113ab
Regards,
Prateek

What's different between busniess system and technical system in SLD?

I can enter product(ect.ERP r/3) , components(ect.FI-CO module) to technical system , then enter technical system to busniess system but ,who can explain what's different between busniess system and technical system in SLD, exactly?
THANKS!

Technical Systems are of following types:
Technical systems are application systems that are installed in your system landscape. An example of an application system is a Customer Relationship Management (CRM) server. In the SLD, there are five types of technical systems:
1.)WEBas java,
2.)Standalone JAVA
3.)Third party
4.)Web as ABAP
1) Web AS Java
Web AS Java systems consist of one or more instances and each instance is installed on a separate host. An instance itself consists of cluster nodes that can communicate with each other.
2.)Standalone Java
Standalone Java technical systems are standalone Java applications that are installed in a computer system from an administration perspective. They can also be installed as an operating system service or as a daemon
Web AS java belongs to the NetWeaver Comes with both ABAP and Java, Standalone instread comes separate from the netWeaver.
3) Third party technical sytem
It can be any of the technical sytem. let us say if you want to send a file to R/3, here the file reside in your local system. for that you can define your local system as a third party technical system.
All those machines that comes under non sap, belongs to the third party.
4.) Web AS ABAP technical systems, ranging from any SAP system to an APO server or CRM server, are based on the same Basis Component (BC), which includes the ABAP interpreter, ABAP Dictionary, ABAP Workbench, and so on. A dedicated database, which stores most of the data of the BC and the application components, is associated with the system.
Also refer : http://help.sap.com/saphelp_nw70/helpdata/en/24/8fa93e08503614e10000000a114084/content.htm
Business systems are logical systems, which function as senders or receivers within XI. Business systems can be SAP systems or third-party systems.
Depending on the associated technical system, the following types of business systems are defined in the SLD:
· Web AS ABAP
A business system, which is associated with a Web AS ABAP.
A business system, which is associated with a Web AS ABAP, can play the role either of an application system or an integration server. An integration server is the central component of XI, which provides a framework for the exchange of information among various internal and external entities of a company. The integration server facilitates the interaction between the different operating systems and applications across internal and external networks.
· Web AS Java
A business system, which is associated with a Web AS Java.
· Standalone
A business system, which is associated with a standalone Java application.
· Third-party
A business system, which is associated with a third-party technical system.
http://help.sap.com/saphelp_nw70/helpdata/en/24/8fa93e08503614e10000000a114084/frameset.htm

Technical Systems Not appearing in Managed Sytem Configuration

Hi Experts,
I am doing Solman_setup after upgrade.I am in Managed system configuration step.I have synchronized Abap and java systems through RZ70 and NWA respectively to Solamn Local SLD and hence they are also appearing in LMDB (technical system tab).However when I am opening Managed System Configuration page no technical system (Abap or Java) is found (except solman Abap and solman Java) technical system tab page (find the screen shot for ur convenience ).Can any one help me out to find the solution.
Thanks
Aditya Roushan

Hi
Please check the Synchronization job between SLD and LMDB is running fine.
Did you finish all the steps(SLD Setup) System Preparation?
If the issue still exist please de actviate the SLD and recreate again
Run the SLD and LMDB Sync job again after the recreation Step: SLD Setup
Kind Regards,
Phaneendra Kakani

SLD-Technical system -Web AS Java

Dear All,
I am able create techinical system for Web As ABAP. And want to create Web AS Java. Will you please explain me procedure.

Hi,
Ideally you should not create any technical system manually. When you go to SLD Administrstion --> profiles --> Data supplier, here you enter your backend server specific data for e.g. host name, instance number etc, and then you restart your SLD.once this is done successfully then your technical system automatically gets available under Technical Syatems. you should follow the same for JAVA system.
Regards,
Ameya

Web as JAVA in Technical System

Hi,
I deleted my web as java in technical system for mistake and when I created same information doesn´t show.
How I created the web as java?
Thanks,
Diego

Hi Diego.
If we are speaking about the J2EE of XI, just restart the J2EE from transaction SMICM or with a STOPSAP STARTSAP.
The J2EE will register it self automatically into the SLD.
Regards
Sandro

Regarding error in creating technical system of type WEB AS ABAP

while creating technical system of WEB AS ABAP i have few doubts
1) host name:(do we have to give sap system name or xi system name)
and while creating business system for this technical system am not able to find the option under RELATED INTEGRATION SERVER i.e xi3/sxi what ever it may be,so am facing very difficulty while creating communication channel and not able to select the integration engine under the ADAPTER ENGINE ,so please provide me suitable solution with screen shoits if possible ,it very urgent for me

pls check this
/people/michal.krawczyk2/blog/2005/03/10/registering-a-new-technical-system-in-sld--abap-based
as per ur doubt
1. host name:; sap system (can find under system status info-->database of R/3)
2. SId is system status->database>name (3) characters
3.while creating business system for this technical system am not able to find the option under RELATED INTEGRATION SERVER--as fra as this info that is there when u follow the wizard of creating Business system , also did u select business system role as application system name then probly u can get the related server name ,make sure ur technical system is created well

Technical System of Web AS ABAP

hi all,
i have following doubts when creating technical system of web as ABAP type.
1)when creating techincal system it is asking me for
' Message Port (sapmsXXX): '. what should i enter for this field and wheredo i get the details from. by default it is taking 3600 is it ok if i go ahead with 3600.
2) logical system name .it appears it is optional but should i fill this entry as well.
3) After creating the technical system. do i need to fill TMS Domain and TMS Transport Group Name. if yes how do i need to fill and and what is the use of this field.
can some one suggest me a blog for Technical System creation for web as abap type.
thanks,
raj

Hi,
you can do it automatically
check out my weblog:
/people/michal.krawczyk2/blog/2005/03/10/registering-a-new-technical-system-in-sld--abap-based
or you can find how to do it
(in more details) in my book too:
<a href="/people/michal.krawczyk2/blog/2006/10/11/xi-new-book-mastering-idoc-business-scenarios-with-sap-xi">Mastering IDoc Business Scenarios with SAP XI</a>
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

WEBAS Java Technical system

Similar Messages

Maybe you are looking for