Webauth bundle (where?)

I have a WLC 4402 ver 4.2. I'm working on getting guest wireless working with web authentication. The documentation speaks of downloadable webauth bundles. What are they and where do I get them? I imagine them as being a skin of sorts to modify the internal auth page.
--Patrick

Hi,
I am experience the same issue(I think). New cust-bundle, used exactly the same code for the scripts that are in the sample but can't authenticate. It halts in the redirectpage with the new URL. Odd thing is that the WLC not even succeed to authenticate the user.
Any progress from TAC?

Similar Messages

WLC 5508 - Error When Uploading Webauth Bundle

Currently have a WLC 5508 running 7.4.110.0. I'm trying to upload (download) a webauth bundle to the controller from the web interface and am getting an error. I've tried using FTP, SFTP and TFTP and get a different error with each. When I started out with this, I was using a modified login.tar. Thinking this was the problem, I switched to using the login.tar file included with the Web Authentication Bundle version 1.0.2 downloaded from the Cisco site. This file fails with the errors below. Does anyone have suggestions as to what I'm doing wrong? Is this is a known bug in this version of the software? Thanks!
For FTP:
The web interface shows:
% Error: Webauth Bundle file transfer failed - Unknown error - refer to log.
Log on the controller shows:
*TransferTask: May 28 13:51:12.942: #UPDATE-3-FTP_TRANSFER_FAIL: updcode.c:5631
Error FTP file Transfer [ftp_get], <30>, Read-only file system.
For SFTP:
The web interface shows:
% Error: Webauth Bundle file transfer failed - Unknown error - refer to log.
Log on the controller shows:
*TransferTask: May 28 14:52:58.779: #UPDATE-3-SFTP_TRANSFER_FAIL: updcode.c:5869
Error SFTP file Transfer [sftp_get], <11>, Resource temporarily unavailable.
For TFTP:
The web interface shows:
% Error: Webauth Bundle file transfer failed - Unknown error - refer to log.
Log on the controller shows:
*TransferTask: May 28 15:02:39.232: #UPDATE-3-FILE_OPEN_FAIL: updcode.c:4593 Fai
led to open file webauth.tar.
*sshpmReceiveTask: May 28 15:02:39.153: #OSAPI-3-MUTEX_FREE_INFO: osapi_sem.c:10
87 Sema 0x2b32def8 time=11504 ulk=18587678 lk=18576174 Locker(sshpmReceiveTask s
shpmrecv.c:1662 pc=0x10b07938) unLocker(sshpmReceiveTask sshpmReceiveTaskEntry:1
647 pc=0x10b079

Hi,
1. Did you used PIcozip to compress your webauth bundle?
2. Did you try only with one laptop , if yes then try to use other one.
3. Just try to upload default webauth bundl from cisco to wlc and show the result to us.
7.4.121.0 is very stable version.
Regards

Cisco 5508 HA - Webauth Bundle for multiple SSID/multiple web pages

Hi Guys,
I have 2* cisco 5508 WLC in HA mode . Both are running IOS 7.5.102.0 . Everything is working perfectly fine.
I need to Creat 3 differnet SSID and Creat 3 different login Pages for them . Each user from respective SSID will get specified login Page. like
I have few questions :
1) I have downloaded webauth bundle from cisco Support Site and in that itself so many files are there. So based on my scenario , in which folder do i need to copy my login and logo file.
2) i have used Picozip to convert the file in .tar format but its giving me following error "
% Error: Webauth Bundle file transfer failed - No reply from the TFTP serve" but i can ping my tftp server easliy.
3) As Controllers are in HA mode , so once i am successful in uploading webauth bundle then it will be replicated on secondary controller or do i have to turn off SSO and upload in both one by one.
Please help me out in this.
Cheers

Hello Sandeep,
i have uploaded the tar which you have sent to me. When i supply my username and pwd, after that it keeps on going and not showing any end result. so it stays on same page and nothing happening after that.
Are there any more radius ACL's to be defined ? 10.10.13.x is wireless client network , 192.168.10.21 is Radius Server , 192.168.10.215 is proxy server. Is there any other ACL need to be defined ??
                       Source                         Destination                 Source Port Dest Port
Index Dir       IP Address/Netmask               IP Address/Netmask       Prot    Range       Range    DSCP Action      Counter
     1 Any      10.10.13.0/255.255.255.0     192.168.10.21/255.255.255.255 Any     0-65535     0-65535 Any Permit           0
     2 Any   192.168.10.21/255.255.255.255      10.10.13.0/255.255.255.0    Any     0-65535     0-65535 Any Permit           0
     3 Out      10.10.13.0/255.255.255.0           1.1.1.1/255.255.255.255 Any     0-65535     0-65535 Any Permit           0
     4 In         1.1.1.1/255.255.255.255      10.10.13.0/255.255.255.0    Any     0-65535     0-65535 Any Permit           0
     5 Any      10.10.13.0/255.255.255.0    192.168.10.215/255.255.255.255 Any     0-65535     0-65535 Any Permit          98
     6 Any 192.168.10.215/255.255.255.255      10.10.13.0/255.255.255.0    Any     0-65535     0-65535 Any Permit          98
DenyCounter : 12

How to retrieve the webauth-bundle on WLC

Hi all,
I can see the web auth bundle:
(Cisco Controller) show custom-web webauth-bundle
box-bottom.gif
              box-left.gif
                          image.gif
                                        login.html
                                                  logo.gif
                                                          logout.html
Now I want to download the web bundle( box-buttom.gif, box-left.gif...logo.gif,logout.gif) to my PC. Is it possible, if so, how?

Not completley related but might help??
https://supportforums.cisco.com/message/3263628#3263628
Please rate this response thanks

Webauth bundle issue

Anyone know the structure of a page on java, cause i have a problem to download the .tar is this correct on the structure???

Have you looked at the code for the default webauth or download the webauth bundle form CCO? You can use that HTML code and modify that to your liking. There is also a document on the forum regarding webauth but I don't have the link for that.
Thanks,
Scott Fella
Sent from my iPhone

Overwrite image webauth-bundle WLC 5500

Hi,
Does any one knows how to replace an image in webauth-bundle on WLC 5500?
When I run "show custom-web webauth-bundle", I do see the files:
aup.html
login.html
yourlogo.jpg
But, the size of yourlogo.jpg is too big and need to replace with a smaller one.
I have tried (with the appropiate IP and filename):
transfer download mode tftp
transfer download datatype image
transfer download serverip tftp-server-ip-addres
transfer download filename {filename.jpg | filename.gif | filename.png}
but, it does not work.
Thanks very much.

If the size changes, then yes you will need to define that on the html. Anyways, you will need to tar up the files and upload it to the WLC. That is the only way to update a custom webauth, either being a change to the html, image or maybe the AUP.
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered"

WebAuth Bundle

Hai all ,
Recectly we replaced Cisco 2100 Series LAN controller to Cisco 5508 Wirless LAN controller , I downloaded WebAuth Bundle from my Old LAN Controller ,when i am trying to upload to my New Wireless LAN controller ,its not uploading and also it gave me uploading failure error message .

Was it a customized webauth that you had on your 2106? When you say downloaded it from the 2106, you mean you previewed the webauth page and right clicked and then view source and saved that as login.html along with any images? I do that all the time, and as long as you tar the file up correctly and it's under 1MB you should be okay.
Thanks,
Scott Fella
Sent from my iPhone

WLC 5508 - WebAuth Bundle tar error 256

Hi all,
I have a new fresh 5508 release 7.0.98.0
When I try to download (I mean upload to the controller) a customized Webauth bundle in .tar format I have the following message error in the syslog :
*TransferTask: Oct 29 12:56:08.894: %UPDATE-3-UNTAR_CMD_FAIL: updcode.c:2832 Error during untar of webauth bundle. Tar returned 256.
If someon could help me...
Thanks

Excellent find, Karl!
I'd just to clarify a bit for those who might not have completely understood this. Note that Karl said all files and folders must have UID root and GID root. Running chown root only changes the UID. To change the GID, you must also run chgrp root . The easiest way to go about this is to create a new directory, copy your current tar file to it and extract, chown and chgrp against ./*, then tar it back up.
su root # alternatively, you can use sudo for chown and chgrp
mkdir weblogintmp
cp weblogin.tar weblogintmp/
cd weblogintmp
tar -xvf weblogin.tar
rm weblogin.tar
chown -R root ./*
chgrp -R root ./*
tar -cvf weblogin-new.tar ./*
## the tar file itself doesn't need to have UID and GID root, only the contents of it does.
Karl also pointed out that this must be done from a Unix/Linux-based operating system that a GID (group ID) literally named root. In BSD-based systems (at least the ones I've worked with, including Mac OSX), the root-equivalent GID is named wheel. The 5508 WLC with 7.0.98.0 will not accept this.
If you do all of this and it still gets rejected by the WLC, consider that there might actually be something else wrong with it. There's a fantastic article in the Documents section of the Security and Network Management group which helped me figure out a couple issues I had in the past:
https://supportforums.cisco.com/docs/DOC-13954
Here's a snippet that pertains to not being able to transfer your webauth bundle to a WLC:
"There are some limitations with custom webauth that varies with versions and bugs. The things to watch for are .tar file size (used to be 1Meg maximum), also the number of files in the .tar as well as the filename length of the files in there (something like 30 characters max for a file)."

Free Wifi with bundle,where is the "key" in my account page?

I had this installed with my 'so called 3way-bundle' on October 17-18, 2010, forgot exactly which date, I went into the hospital for Cardiac Cath on the 19th, so excuse the blurr..hehe, anyway, I think it was the 18th.
I had called earler to get the key numbers for wifi, but they did not work from my home, I live too far away from a strong connection, and I was not about to run to Starbucks just to get my new laptop running.. Anyway, the Gentleman who installed my wireless router to my laptop, at home, gave me the KEY numbers so that my children, when they came to visit me, after the procedure, and help me out for the week, could use their own laptops in my home, utilizing MY wireless connection, so that they could continue working at their jobs, retrieving emails, etc. When they left, I must have accidentally thrown away the written key numbers.
Nonetheless, they are gone.
I log in HERE. Guess what? No wifi number keys ANYWHERE. It even says I have to register. OK. so, I register. Still, no key numbers on my account page anywhere to be found.
This is a simple thing. why can't I find it. I try getting into the support box chat. I can't read the text drop down box. It's too tiny to read the text in the menu options. I'm not an idiot, I'm a registered NURSE. I'm 57, amd my eyes are 20/20 when I drive. This is ridiculous, Where are the F... key numbers for my wifi that I supposedly paid for with my bundle?

I assume you are talking about having the ability to connect to the wireless in your home. If that is the case you need to look at the bottom or side of the Router that Verizon installed. There will be a sticker that says SSID and wep key. The SSID is the wireless you will connect to with your laptop. The wep key is the password you will enter into your laptop when you double click the SSID.
I hope this is what you are looking for.
Jim

Syslogging on WLC for custom webauth bundle

Hi,
I recently created a WLAN for guest users. They would have to "register" themselves by entering an emailadress. After this they get access to guest WLAN for a number of hours. My question: In the logs of our syslog server I don't see any of these registrations. How can I enable this or what is needed to do this?
kind regards,
tverscheure

Hello Tim,
As per your query i can suggest you the following solution-
In order to configure the WLC for syslog servers with the GUI, complete these steps from the Wireless LAN Controller GUI.
1.Choose MANAGEMENT > Logs > Config to navigate to this page.
2.Enter the syslog server IP address and click Add.
3.Under Syslog Level, set the severity level to filter syslog messages to the syslog servers.
4.Under Syslog Facility, set the facility for outbound syslog messages to the syslog servers.
5.Click Apply.
For more information refer to the link-
http://www.cisco.com/en/US/products/ps6307/products_configuration_example09186a00809a2d76.shtml
Hope this will help you.

Custom WebAuth WLC 5760

I want to setup a custom webauth for my WLC 5760. I already downloaded the webauth bundle and put it in WLC via Command Download in WLC GUI. According to Guide, after the download completed, the custom page will appear in custom page dropdown for web parameter map.
But in my case it shows nothing. So where did I miss ?
Thank You

Hi
Pls refer this document
http://www.cisco.com/c/en/us/support/docs/wireless/5700-series-wireless-lan-controllers/117728-configure-wlc-00.html
HTH
Rasika
**** Pls rate all useful responses ****

WLC Custom Web Auth Bundle sample .tar file is not on WCS

The WLC documentation would make it appear (or maybe previously) you should download a sample web auth bundle code from the WCS Templates. I was never able to find a sample .tar file on the WCS 7.0.172.0 templates.
However I found on Cisco.com under Support > Downloads > Products >Wireless> Wireless LAN Controller Standalone Controllers> Cisco 5500 Series Wireless Controllers > Cisco 5508 Wireless Controller > Wireless Lan Controller Web Authentication Bundle-1.0.2 > webauth_bundle-1.0.2.zip
It was updated in June 2011, some pretty good sample html code.
The readme.html in the sample webauth_bundle-1.0.2.zip file has been very helpful , almost as good as the suppport community web page on custom web auth.
https://supportforums.cisco.com/docs/DOC-13954

WCS config guide 7.0.172 is correct
http://www.cisco.com/en/US/docs/wireless/wcs/7.0MR1/configuration/guide/temp.html#wp1129979
The bundle in WCS is downloaded through :
configure->controller
"select a command"-> download customized webauth bundle.
Just tested it and it was there.
The one on cisco.com is better though

Unable to load resource bundles in Flex 4.5 mobile

Hi All,
Starting to localize my strings in my first mobile application and for some reason... resourceManager is not finding my strings.
My project structure is as follows:
src/assets/locale/en_US
resources.properties
My compiler args are:
-locale=en_US -source-path=assets/locale/{locale} -allow-source-path-overlap=true
My first test is to externalize my first views title, but resourceManager fails to load my resource:
views.loginView.title=Login
Not sure what I am doing wrong, I am compiling my web client in Flex 4.5/Flash Builder Burito no problem but my mobile client is not finding my strings. Have tried cleaning ect...nothing... I also tried excluding the -source-path compiler args and added the new source path to Flash Builder but same result.
Any help much appreciated.
Greg

Well, my resource bundles where not being compiled into my application due
to a missing meta tag instruction informing the compiler to include it.
<fx:Metadata>
[ResourceBundle("resources")
</fx:Metadata>
As per the 13 errors... they seem to have gone away now and have not seen them since adding the metadata tag.
Great doc on the subject http://help.adobe.com/en_US/flex/using/WS2db454920e96a9e51e63e3d11c0bf69084-7fcf.html. Unfortunately, when I skimmed through it I missed the 'Using resource bundles' section that describes the metadata tag usage.
Thanks for listening :-)
Good Adobe

WLC 7.2 - Custom WebAuth using waep Template w/ HTTP Only

We are trying to get the waep template (default no changes) from the Cisco WebAuth bundle to work on a 5508 controller.
We've setup the controller to use the custom login.tar that comes with the waep template folder in the bundle.
We setup the WLAN to work off the global template and we used the config network web-auth secureweb disable command to allow only http rather than https (which is supposed to work in 7.2 code)
When we test with the custom bundle, we get no answer from the controller, just a url of
http://1.1.1.1/fs/customwebauth/login.html?switch_url=http://1.1.1.1/login.html&ap_mac=c3:12:30:01:a4:d0&client_mac=01:21:ca:b3:13:12&wlan=Guest&redirect=www.google.com/
If we turn custom off, and use internal everything works...
Just to be clear.. we aren't looking for authentication (user and pass) we are trying to do the enter your email and click accept to the aup method.
Thanks for any help!

No changes to the tar file that comes as part of the bundle..
Downloaded the bundle, unziped all folders locally.. then uploaded the login.tar from the waep folder right to the controller.
Changed webauth to use custom, and applied.
Tested multliple times with the same results.

IDOC bundling number of idocs in one message

Hi
I am using IDOC bundling where I have one message with around 33,000 idocs inbound to PI. Can i break the number of idocs per message so that I can have 5,000 idocs in each message. Is there a paremeter that needs to be changed create a recordset of 5,000 idocs per message or less?
Also Can I do IDOC packaging when sending the above 33,000 IDOCs to SAP ?
Please advise.
Thanks,
Teresa

Hi Raj,
My connectivity is JDBC - PI - SAP.
I execute a stored procedure to pick up line items and do graphical mapping to conver to IDOCS. According to you the best way is to pick less line items at a time and conver to IDOCs?
Can i do IDOC packaging at sender side in my scneario though i am already doing IDOC bundling?
Thanks,
Teresa

Webauth bundle (where?)

Similar Messages

Maybe you are looking for