WebAuth Bundle

Hai all ,
Recectly we replaced Cisco 2100 Series LAN controller to Cisco 5508 Wirless LAN controller , I downloaded WebAuth Bundle from my Old LAN Controller ,when i am trying to upload to my New Wireless LAN controller ,its not uploading and also it gave me uploading failure error message .

Was it a customized webauth that you had on your 2106? When you say downloaded it from the 2106, you mean you previewed the webauth page and right clicked and then view source and saved that as login.html along with any images? I do that all the time, and as long as you tar the file up correctly and it's under 1MB you should be okay.
Thanks,
Scott Fella
Sent from my iPhone

Similar Messages

WLC 5508 - Error When Uploading Webauth Bundle

Currently have a WLC 5508 running 7.4.110.0. I'm trying to upload (download) a webauth bundle to the controller from the web interface and am getting an error. I've tried using FTP, SFTP and TFTP and get a different error with each. When I started out with this, I was using a modified login.tar. Thinking this was the problem, I switched to using the login.tar file included with the Web Authentication Bundle version 1.0.2 downloaded from the Cisco site. This file fails with the errors below. Does anyone have suggestions as to what I'm doing wrong? Is this is a known bug in this version of the software? Thanks!
For FTP:
The web interface shows:
% Error: Webauth Bundle file transfer failed - Unknown error - refer to log.
Log on the controller shows:
*TransferTask: May 28 13:51:12.942: #UPDATE-3-FTP_TRANSFER_FAIL: updcode.c:5631
Error FTP file Transfer [ftp_get], <30>, Read-only file system.
For SFTP:
The web interface shows:
% Error: Webauth Bundle file transfer failed - Unknown error - refer to log.
Log on the controller shows:
*TransferTask: May 28 14:52:58.779: #UPDATE-3-SFTP_TRANSFER_FAIL: updcode.c:5869
Error SFTP file Transfer [sftp_get], <11>, Resource temporarily unavailable.
For TFTP:
The web interface shows:
% Error: Webauth Bundle file transfer failed - Unknown error - refer to log.
Log on the controller shows:
*TransferTask: May 28 15:02:39.232: #UPDATE-3-FILE_OPEN_FAIL: updcode.c:4593 Fai
led to open file webauth.tar.
*sshpmReceiveTask: May 28 15:02:39.153: #OSAPI-3-MUTEX_FREE_INFO: osapi_sem.c:10
87 Sema 0x2b32def8 time=11504 ulk=18587678 lk=18576174 Locker(sshpmReceiveTask s
shpmrecv.c:1662 pc=0x10b07938) unLocker(sshpmReceiveTask sshpmReceiveTaskEntry:1
647 pc=0x10b079

Hi,
1. Did you used PIcozip to compress your webauth bundle?
2. Did you try only with one laptop , if yes then try to use other one.
3. Just try to upload default webauth bundl from cisco to wlc and show the result to us.
7.4.121.0 is very stable version.
Regards

Cisco 5508 HA - Webauth Bundle for multiple SSID/multiple web pages

Hi Guys,
I have 2* cisco 5508 WLC in HA mode . Both are running IOS 7.5.102.0 . Everything is working perfectly fine.
I need to Creat 3 differnet SSID and Creat 3 different login Pages for them . Each user from respective SSID will get specified login Page. like
I have few questions :
1) I have downloaded webauth bundle from cisco Support Site and in that itself so many files are there. So based on my scenario , in which folder do i need to copy my login and logo file.
2) i have used Picozip to convert the file in .tar format but its giving me following error "
% Error: Webauth Bundle file transfer failed - No reply from the TFTP serve" but i can ping my tftp server easliy.
3) As Controllers are in HA mode , so once i am successful in uploading webauth bundle then it will be replicated on secondary controller or do i have to turn off SSO and upload in both one by one.
Please help me out in this.
Cheers

Hello Sandeep,
i have uploaded the tar which you have sent to me. When i supply my username and pwd, after that it keeps on going and not showing any end result. so it stays on same page and nothing happening after that.
Are there any more radius ACL's to be defined ? 10.10.13.x is wireless client network , 192.168.10.21 is Radius Server , 192.168.10.215 is proxy server. Is there any other ACL need to be defined ??
                       Source                         Destination                 Source Port Dest Port
Index Dir       IP Address/Netmask               IP Address/Netmask       Prot    Range       Range    DSCP Action      Counter
     1 Any      10.10.13.0/255.255.255.0     192.168.10.21/255.255.255.255 Any     0-65535     0-65535 Any Permit           0
     2 Any   192.168.10.21/255.255.255.255      10.10.13.0/255.255.255.0    Any     0-65535     0-65535 Any Permit           0
     3 Out      10.10.13.0/255.255.255.0           1.1.1.1/255.255.255.255 Any     0-65535     0-65535 Any Permit           0
     4 In         1.1.1.1/255.255.255.255      10.10.13.0/255.255.255.0    Any     0-65535     0-65535 Any Permit           0
     5 Any      10.10.13.0/255.255.255.0    192.168.10.215/255.255.255.255 Any     0-65535     0-65535 Any Permit          98
     6 Any 192.168.10.215/255.255.255.255      10.10.13.0/255.255.255.0    Any     0-65535     0-65535 Any Permit          98
DenyCounter : 12

How to retrieve the webauth-bundle on WLC

Hi all,
I can see the web auth bundle:
(Cisco Controller) show custom-web webauth-bundle
box-bottom.gif
              box-left.gif
                          image.gif
                                        login.html
                                                  logo.gif
                                                          logout.html
Now I want to download the web bundle( box-buttom.gif, box-left.gif...logo.gif,logout.gif) to my PC. Is it possible, if so, how?

Not completley related but might help??
https://supportforums.cisco.com/message/3263628#3263628
Please rate this response thanks

Webauth bundle issue

Anyone know the structure of a page on java, cause i have a problem to download the .tar is this correct on the structure???

Have you looked at the code for the default webauth or download the webauth bundle form CCO? You can use that HTML code and modify that to your liking. There is also a document on the forum regarding webauth but I don't have the link for that.
Thanks,
Scott Fella
Sent from my iPhone

Overwrite image webauth-bundle WLC 5500

Hi,
Does any one knows how to replace an image in webauth-bundle on WLC 5500?
When I run "show custom-web webauth-bundle", I do see the files:
aup.html
login.html
yourlogo.jpg
But, the size of yourlogo.jpg is too big and need to replace with a smaller one.
I have tried (with the appropiate IP and filename):
transfer download mode tftp
transfer download datatype image
transfer download serverip tftp-server-ip-addres
transfer download filename {filename.jpg | filename.gif | filename.png}
but, it does not work.
Thanks very much.

If the size changes, then yes you will need to define that on the html. Anyways, you will need to tar up the files and upload it to the WLC. That is the only way to update a custom webauth, either being a change to the html, image or maybe the AUP.
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered"

WLC 5508 - WebAuth Bundle tar error 256

Hi all,
I have a new fresh 5508 release 7.0.98.0
When I try to download (I mean upload to the controller) a customized Webauth bundle in .tar format I have the following message error in the syslog :
*TransferTask: Oct 29 12:56:08.894: %UPDATE-3-UNTAR_CMD_FAIL: updcode.c:2832 Error during untar of webauth bundle. Tar returned 256.
If someon could help me...
Thanks

Excellent find, Karl!
I'd just to clarify a bit for those who might not have completely understood this. Note that Karl said all files and folders must have UID root and GID root. Running chown root only changes the UID. To change the GID, you must also run chgrp root . The easiest way to go about this is to create a new directory, copy your current tar file to it and extract, chown and chgrp against ./*, then tar it back up.
su root # alternatively, you can use sudo for chown and chgrp
mkdir weblogintmp
cp weblogin.tar weblogintmp/
cd weblogintmp
tar -xvf weblogin.tar
rm weblogin.tar
chown -R root ./*
chgrp -R root ./*
tar -cvf weblogin-new.tar ./*
## the tar file itself doesn't need to have UID and GID root, only the contents of it does.
Karl also pointed out that this must be done from a Unix/Linux-based operating system that a GID (group ID) literally named root. In BSD-based systems (at least the ones I've worked with, including Mac OSX), the root-equivalent GID is named wheel. The 5508 WLC with 7.0.98.0 will not accept this.
If you do all of this and it still gets rejected by the WLC, consider that there might actually be something else wrong with it. There's a fantastic article in the Documents section of the Security and Network Management group which helped me figure out a couple issues I had in the past:
https://supportforums.cisco.com/docs/DOC-13954
Here's a snippet that pertains to not being able to transfer your webauth bundle to a WLC:
"There are some limitations with custom webauth that varies with versions and bugs. The things to watch for are .tar file size (used to be 1Meg maximum), also the number of files in the .tar as well as the filename length of the files in there (something like 30 characters max for a file)."

Webauth bundle (where?)

I have a WLC 4402 ver 4.2. I'm working on getting guest wireless working with web authentication. The documentation speaks of downloadable webauth bundles. What are they and where do I get them? I imagine them as being a skin of sorts to modify the internal auth page.
--Patrick

Hi,
I am experience the same issue(I think). New cust-bundle, used exactly the same code for the scripts that are in the sample but can't authenticate. It halts in the redirectpage with the new URL. Odd thing is that the WLC not even succeed to authenticate the user.
Any progress from TAC?

Syslogging on WLC for custom webauth bundle

Hi,
I recently created a WLAN for guest users. They would have to "register" themselves by entering an emailadress. After this they get access to guest WLAN for a number of hours. My question: In the logs of our syslog server I don't see any of these registrations. How can I enable this or what is needed to do this?
kind regards,
tverscheure

Hello Tim,
As per your query i can suggest you the following solution-
In order to configure the WLC for syslog servers with the GUI, complete these steps from the Wireless LAN Controller GUI.
1.Choose MANAGEMENT > Logs > Config to navigate to this page.
2.Enter the syslog server IP address and click Add.
3.Under Syslog Level, set the severity level to filter syslog messages to the syslog servers.
4.Under Syslog Facility, set the facility for outbound syslog messages to the syslog servers.
5.Click Apply.
For more information refer to the link-
http://www.cisco.com/en/US/products/ps6307/products_configuration_example09186a00809a2d76.shtml
Hope this will help you.

WLC Custom Web Auth Bundle sample .tar file is not on WCS

The WLC documentation would make it appear (or maybe previously) you should download a sample web auth bundle code from the WCS Templates. I was never able to find a sample .tar file on the WCS 7.0.172.0 templates.
However I found on Cisco.com under Support > Downloads > Products >Wireless> Wireless LAN Controller Standalone Controllers> Cisco 5500 Series Wireless Controllers > Cisco 5508 Wireless Controller > Wireless Lan Controller Web Authentication Bundle-1.0.2 > webauth_bundle-1.0.2.zip
It was updated in June 2011, some pretty good sample html code.
The readme.html in the sample webauth_bundle-1.0.2.zip file has been very helpful , almost as good as the suppport community web page on custom web auth.
https://supportforums.cisco.com/docs/DOC-13954

WCS config guide 7.0.172 is correct
http://www.cisco.com/en/US/docs/wireless/wcs/7.0MR1/configuration/guide/temp.html#wp1129979
The bundle in WCS is downloaded through :
configure->controller
"select a command"-> download customized webauth bundle.
Just tested it and it was there.
The one on cisco.com is better though

WLC 7.2 - Custom WebAuth using waep Template w/ HTTP Only

We are trying to get the waep template (default no changes) from the Cisco WebAuth bundle to work on a 5508 controller.
We've setup the controller to use the custom login.tar that comes with the waep template folder in the bundle.
We setup the WLAN to work off the global template and we used the config network web-auth secureweb disable command to allow only http rather than https (which is supposed to work in 7.2 code)
When we test with the custom bundle, we get no answer from the controller, just a url of
http://1.1.1.1/fs/customwebauth/login.html?switch_url=http://1.1.1.1/login.html&ap_mac=c3:12:30:01:a4:d0&client_mac=01:21:ca:b3:13:12&wlan=Guest&redirect=www.google.com/
If we turn custom off, and use internal everything works...
Just to be clear.. we aren't looking for authentication (user and pass) we are trying to do the enter your email and click accept to the aup method.
Thanks for any help!

No changes to the tar file that comes as part of the bundle..
Downloaded the bundle, unziped all folders locally.. then uploaded the login.tar from the waep folder right to the controller.
Changed webauth to use custom, and applied.
Tested multliple times with the same results.

Viewing/uploading customized WebAuth pages

Howdy,
I've got a 5508 running 7.6.100 acting as an anchor in a remote location. It is using customized WebAuth pages but I'm needing to verify the actual html content of those pages as they are in use today. Downloading a new WebAuth bundle is easy, and I know I can preview the WebAuth login page, and I've got the pages that 'should' have been downloaded to the controller- I need to see what's there now. Alas, because of my location, I can't simply toss a client on the WLAN to examine the pages either.
Before having to overwrite the existing pages, does anyone have a way to upload or view customized pages on the WLC?

AHA! CLI and Google-fu remain my best friends.
Although the GUI in this version does not allow UPloading WebAuth bundles from the WLC, you can do it from the CLI, you just need the commands....
Fire up your TFTP server (you could use FTP), and set the transfer commands using CLI on the WLC
TRANSFER UPLOAD MODE tftp
TRANSFER UPLOAD DATATYPE WEBAUTHBUNDLE
TRANSFER UPLOAD SERVERIP tftp-server-address
TRANSFER UPLOAD FILENAME destination-filename
TRANSFER UPLOAD START
Check your settings and click 'y' to start
Viola, a copy of the current WebAuth bundle! Unzip the bundle and you can see the current web pages used.

Cisco 5760 WebAuth "Consent Success Page"

I've downloaded the WebAuth bundle from cisco.com and uploaded to a Cisco 5760 software version 3.6
It is all functioning correctly, except one aspect.
After the user reads the AUP and clicks the submit button they are sent to a "Consent Success Page" that reads "Thanks for Accepting our Consent" and will redirect to the ios configured redirectURL after 5 seconds.
Has anyone come across this? Can anyone advise how I customise this "Consent Success Page"? It doesn't appear to load the success.html page that I've configured below.
parameter-map type webauth global
type webconsent
virtual-ip ipv4 1.1.1.1
max-http-conns 100
intercept-https-enable
parameter-map type webauth PublicWiFi
type consent
consent email
redirect on-success http://bbc.co.uk
custom-page login device flash://consent/pub/consent.html
custom-page success device flash://consent/pub/success.html
custom-page failure device flash://consent/pub/failed.html
custom-page login expired device flash://consent/pub/logout.html
logout-window-disabled

May be the bug CSCup67821 with no workaround

Error extracting webauth file

Hi there - I'm having a problem downloading a simple webauth file to my 2106C. I turned debug on and this is what it show:
TFTP receive complete... extracting webauth files.
Thu Feb 21 07:52:51 2008: Still waiting! Status = 2
Thu Feb 21 07:52:54 2008: upd_extract_webauth_components
Thu Feb 21 07:52:54 2008: tar_file_name = /mnt/application/webauth.tar
Thu Feb 21 07:52:54 2008: prsnt_strg = tar -C /mnt/application/webauth_ramdisk/ -xf /mnt/application/webauth.tar
Thu Feb 21 07:52:54 2008: login.html not found in the webauth bundle downloaded
Thu Feb 21 07:52:54 2008: RESULT_STRING: Error extracting webauth files.
Thu Feb 21 07:52:54 2008: RESULT_CODE:18
I noticed it says that there is no login.html fiel, but that;s not true. I do have one login.html file. I have tried everything and I am using PicoZip (30 day free version) to tar the file. I was able to do it once, but then I needed to modify the page and since then I have not been successfull. Any help would be greatly appreciate it.
Cheers!

All - problem ahs been solved. This is how I did it jsut in case someone else runs into the same issue. I noticed that the login.html file had a firefox icon (firefox was my defualt browser) I uninstalled firefox and archive the fiel again and boom -success . Weird, right? well I don't know if that was the issue, but it got resolved so you you run into the same issue, maybe is worth a try.
CheerS!

Custom WebAuth WLC 5760

I want to setup a custom webauth for my WLC 5760. I already downloaded the webauth bundle and put it in WLC via Command Download in WLC GUI. According to Guide, after the download completed, the custom page will appear in custom page dropdown for web parameter map.
But in my case it shows nothing. So where did I miss ?
Thank You

Hi
Pls refer this document
http://www.cisco.com/c/en/us/support/docs/wireless/5700-series-wireless-lan-controllers/117728-configure-wlc-00.html
HTH
Rasika
**** Pls rate all useful responses ****

WebAuth Bundle

Similar Messages

Maybe you are looking for