Webcam doesnt work properly with Face Recognition tool

Hey guys, when I open my 'face recognition' tab and click register, that blue light will flash on and off all day, and never register/recognize me. Whats the deal?
Am I doing something wrong? If you need any more information let me know, and I'll gladly provide it.
By the way, the cam works fine, I use it on Skype all the time.
Thanks!

Hi
Maybe you did something wrong while face tool registration:
Check this thread about face recognition
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=35965
Start Toshiba Face recognition tool
Click on Register Face and follow the menu on the screen and register new account
Enter Settings and enable the option Automatic title selection. You can also choose first option in Authentication mode
Restart your notebook
When notebook restarts click on Switch user
Choose Start Face recognition
Here is another thread which provides the detailed instruction how to use this software:
http://forums.computers.toshiba-europe.com/forums//thread.jspa?messageID=147434
check both!!!

Similar Messages

JavaMail doesnt work properly with locally installed qmail

'lo ppl
i have a mail application using JavaMail on a linux box. everything works alright when i use any external host with a different mail server from qmail. but when i configure the program to use localhost (where qmail runs) it successfully sends the mail but it never gets delivered. the mail log says
Sorry,_I_couldn't_find_any_host_named_xxxx.com?._
it appends a ? to the hostname but i dont know why. this ? doesnt appear anywhere in the source. for any other programs qmail works absolutetly correct.
did anyone of you experience the same problem and can help?
thanks a lot.

Hi,
I don't think that it would be the problem of JavaMail.
I have ever installed James on my win2000 professional
. And My JavaMail application send mail via James in
the localhost to the Internet . Such as yahoo, or other.
But my James could not receive email for me. Because
it is not set MX record.
good luck,
Alfred Wu

Javafx webview doesn't work properly with google keywords tool

Hi,
I am trying to load https://adwords.google.com/o/KeywordTool in a javafx webview but I keep getting the following error:
There was an error with your operation. If you were trying to make a change, it may not have saved. Please refresh this page to try again. If the error continues, log out of your AdWords account, then log in again and return to this page.
The issue is not consistent - once every 10 tries it works. I read in another forum that the issue could be due to missing sunjce_provider.jar but it persists even if I add sunjce_provider.jar to the libraries in my Netbeans project.
The test is as follows:
public class TestBrowser extends Application {
@Override
public void start(Stage stage) throws IOException {
StackPane root = new StackPane();
WebView view = new WebView();
WebEngine engine = view.getEngine();
String uri = "https://adwords.google.com/o/KeywordTool";
engine.load(uri);
root.getChildren().add(view);
Scene scene = new Scene(root, 800, 600);
stage.setScene(scene);
stage.show();
public static void main(String[] args) {
launch(args);
Am I doing something wrong ? or missing something ?
Thanks.

Thanks for the reply.
I don't think the problem is with webkit, qwebview from Qt4 works fine for the same site. I used the flag -Djavax.net.debug=all, but it didn't print any debug messages in the console ? I added -Djavax.net.debug=all to command line parameters in the Run dialog of my Netbeans project. Is that the right way to do it ?

Satellite C850-A797 webcam doesnt work

I have Toshiba Satellite C850-A797 and my webcam doesnt work
I think it is because of Windows update and *the new software interrupt every time i download it,*
It is problem of the server of toshiba as i think
PLEASE HELP!!!!!!!!!

Hi
Question 1)
What system do you have? As Im no mistaken the Satellite C850-A797 was preinstalled with Windows 7 64bit.
The webcam drivers as well as other drivers for Satellite C850 series can be downloaded here:
http://www.toshiba.eu/innovation/download_drivers_bios.jsp
I actually downloaded the webcam driver for the above page and it worked properly.
Check this [webcam driver v 2.0.3.39 for Windows 7 |http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory =2&selFamily=2&selSeries=312&selProduct=7499&selSh ortMod=null&language=13&selOS=30&selType=315&yearu pload=&monthupload=&dayupload=&useDate=null&mode=a llMachines&search=&action=search&macId=&country=al l&selectedLanguage=13&type=315&page=1&ID=88046&OSI D=30&driverLanguage=42]

Replace content smart objects doesnt work properly.

Hello fellow Photoshoppers,
Currently i am working on reusable album templates with smart objects. At first i was very enthusiastic but this was soon to end. as the replacing doesnt work properly.
I made the smart object by using:
1. > file
2. > place
then i try to replace the content by using.
1. > layer
2. > smart objects
3. > replace contents
the old image should get replaced by the chosen file and matching size, smart layers etc. However when i perform the same actions my image gets replaced but it is not the same size as the smart object it replaced. This makes the entire template useless as it would take far too much time resizing every single image. inspired by another video I also tried double clicking the layer and tried replacing the image in the editing sceen by dragging another file on top of the smart object. Again, it does not spread out to the full smart object size and i'm stuck with a small image in need of extra work.
Needless to say, very frustrating.
Any thoughts?

Are you sure you understood how it is intended work?
That is an interesting question, i have no experience with photoshop as i bought CS5,5 just a week ago and have no experience with any of the previous versions either. All info regarding how to make such a template i found from various tutorials, i posted one below. When they do it the image get scaled perfectly. Now since they use some smart filters in the tutorial i applied them aswell to see if this would fix the problem but it did not.
http://www.picturesocial.com/video/wedding-photo-album-templates
Are the images you want to switch in at least always of the same width to height-relation?
I checked both files for consistency and discovered they were shot on different camera's. One file ( the origional smart object ) was cropped form a 21,0MP file and the other was croped from a 10,1 MP file. Both images were cropped to a 2x1 ratio. Having discovered the difference in pixel amount i cropped a different 21,0 MP file to 2x1 ratio and checked both files for their exact dimensions (both images are equal in size with 5616 x 2808 pixels) and replaced the content with the newly cropped file which gave a much better result. However, the image was slightly smaller in photoshop leaving a small gap where the origionally placed smart object lined up perfectly. I turned the situation around and placed the 10,1MP cropped image as the smart object and replaced the content by a 21,0 MP cropped image. As to be expected i ended up with a new image much larger then the smart object. So the smart object does not constrain the files to the dimensions set. As it turns out it only scales the replaced content relative to the size of the origional content of the smart object.
I just need a reusable template with objects that:
- cannot be moved once locked ( if possible) but can have its content replaced
- scales the replaced content to the predefined dimensions
- needs no prework like cropping to the same aspect ratio as the smart object content. ( i want to be able to place a landscape sized raw (3x2) on any landscape format (2x1 / 16x9 / 4x3 or whatever) i find it acceptable to having to crop a portret to landscape orientation first before being able to replace a landscape.
now ive been searching for more info and some people say indesign is much faster in making album pages so I am installing the program as we speak hoping this will be the solution.

Some of my application in macbook pro doesn't work properly with Os Yosemite, such as dictionary and MplayerX and etc

I face to this problem since new OS, Yosemite has installed on my mac book
some of my application in macbook pro doesn't work properly with Os Yosemite, such as dictionary (mac dictionary) and MplayerX and etc
For example when I make MplayerX and such application fullscreen the screen become white and just voice of video can be heard or when I use Mac Dictionary (look-up dictionary) in any pages the meaning of work is not appear ( look at the picture above), so i need to directly open dictionary to find the meaning.
Please help me
tq

Same thing here with MPlayerX (annoying)

Ejecting external discs doesnt work properly, no spin down of disc. why?

ejecting my external discs doesnt work properly anymore in 10.6, no spin down of disc happens, the finder unmounts the disc(s) and then the disc spins on and on. thats weird, because, in 10.5 i ejected discs and then they went spinning down the drive, as it has to be.
when i unplug the disc, which is unmounted from desktop, and still spinning, it makes a terrible noise in the disc. like a high pitched short tone.
any idea whats going wrong here?
thanks!

you probably mean "causing the fail to spindown"
you maybe mean software like techtoolpro5 or drive genius3?
yes i disabled these helper apps on the discs, but first i used it (like monitoring
all discs if they are nearly full, or working s.m.a.r.t and so on. yes its useful,
but obviously it causes problems. i must mention, that i tested my 4 external drives again,
and i found out that i can eject all discs, like said before, but only 2 of the discs are spinning down, after ejecting, BUT only when i use the button "eject" in harddisctoolkit, they dont spin down, when ejecting from desktop (apple+E), and the other 2 of the 4 drives refuse to spin down, after ejecting, even with pressing eject in harddisctoolkit....
i can also state, that these 2 discs, which refuse to spin down, are FW800/400 discs and connected via FW800. and the 2 discs which spin down succesfully are UBS2 discs, if thats worth mentioning...
Message was edited by: purepeter

Remote not working properly with Apple TV...sporadic fuctioning

Hello,
I have no idea what caused this to happen, but both my remotes (I have one from my MacBook Pro and one from my AppleTV) seem to not work properly with AppleTV. It sometimes works but it is extremely frustrating as it only registers about 1 out of every 10-20 clicks then continues to remember the previous clicks therefore making it essentially impossible to select the desired menu/item. Basically it just seems like it's out of control!
I tested whether it was the remote or AppleTV that was causing the problem by running Front Row on my MacBook Pro and both remotes seem to navigate Front Row perfectly fine. They both act the same way with AppleTV, whether they are paired or not. It seems as though something happened with my AppleTV. This problem occurred randomly, with no specific cause I can think of.
Please let me know if any of you have ever experienced this problem and what your solution was, if any!
I have tried restoring to factory conditions, resetting settings, ran diagnostics, unplugged and replugged it, and nothing seems to be working!
Oh, and I just replaced the battery on one and have tried swapping batteries, etc.
HELP PLEASE!
Thank you,
Travis

The menus have never been as responsive as they used to since the 2.0 update in my opinion - basically AppleTV seems to cache/buffer remote click if it is busy or perhaps waiting for something to stream from itunes, and when resources become available it suddenly executes all command rapidly which makes it behave wildly in menus.
Usually happens I find after restarting the unit or if streaming drives have gone in to power saving modes and there's a delay while they wake up to feed the AppleTV.

My ipad2 cannot find my HP A3050 j661b airprint printer although the printer is connected with the same wifi network.Software updates are current on all and my other labtops also work properly with this printer in the same network.Further more it used to

My Ipad 2 cant find my HP3050A j661b airprint printer although the printer is connected to the same wireless network and software updates are current on all and my other laptops also work properly with this printer.further more it used to work with my IPAD2 before when I used the old wireless router but now I changed it to HAUWEI HG231f but I set everything in the same way it was. Thanks in advance.

When you change to the new router, did you re-run the CD to re-set the new SSID and password to the printer.
Otherwise your iPad will not be able "talk" to your printer.

HP computer will not work properly with an HP printer

I have the following two items that I am trying to use together:
- HP 23" TouchSmart Desktop, T6500 2.1GHz 4GB DDR3, 500GB HDD (Windows 7)
- HP OfficeJet 6500 Multi-Function Printer/Scanner/Fax
When I try to scan to Adobe Acrobat Professional 9.0, the document goes through the scanner, however the dialog box that I would expect (e.g. "Next Page" or "Done") never shows up. At this point, the system is unresponsive with respect to Adobe or the printer.
I suspect that it is waiting for the input from the dialog box that never showed up. I tried to move the other windows to see if the dialog opened in the background, however I am not able to select any of them (they remain frozen).
I contacted HP Support, only to have them tell me it must be the driver, and I have an "old" printer. (I did not realize that a 9 month old printer was considered "old"). I have tried all of the possible drivers that are available (original disk, downloads, other downloads from HP tech support), none of these resolves the problem.
In any case, they were unable to resolve the problem of having an HP computer work properly with an HP printer. (The printing function seems to work, just very slowly).
Has anyone else heard of this? Is there a resolution?

Update: I am still looking for a solution to this problem - the scanning portion of the Multi-function OfficeJet 6500 does not work properly with the HP TouchSmart computer.
I have not been able to find anyone in HP that can tell me when (or if) new drivers will be released for this printer.
I decided to investigate upgrading to a newer version of printer since HP told me the 9 month old printer I have was "obsolete", only to find that the identical printer is still on sale in many stores. Hmmm....
I feel like I am getting the run-around from HP.
I have since tried several more driver/software combinations, but every time I have the same problem (as described in the previous post).
If anyone has any ideas or suggestions, I would be most happy to hear them.
Thank you.

TS3789 I have similar problem, my apple tv which has always worked properly with my Samsung tv will no longer play any audio after the latest 5.1 upgrade. Very frustrating as it was working perfectly before. I am starting to not trust apple upgrades until

I have similar problem, my apple tv which has always worked properly with my Samsung tv will no longer play any audio after the latest 5.1 upgrade. Very frustrating as it was working perfectly before. I am starting to not trust apple upgrades until proven for example ios6 on iPhone with that stupid map app instead of google maps.
I just want to buy and hear my iTunes music and videos on my apple tv, could before cant now. Thank you apple. Time to pack up the apple tv and start torrenting without the ios-bs.
Disheartened apple fan.

Welcome to the  discussion forums.
Try going to synching in the sources menu on your tv and selecting 'change itunes library', when it gives you the passcode check itunes to see if the tv is showing up as a new device, if so try entering the pass code. It may be that your tv is seeing itunes as a different library because of a recent upgrade.

Help, web cam is not working properly with win vista

Hii.. my web cam is not working properly with win vista..even if the icon appears bt it does nt start.. its
lenovo easy capture 2.5...so if u cud suggest me anything...
Moderator note; subject edited

re-install drivers and try again. ( also easy capture )

Win 7 VPN Client 5.0.07 no longer works properly with Citrix DNE Update

Since Cisco Systems VPN Client does not work properly with mobile broadband on Windows 7, we've been successfully using Citrix's DNE Update to fix this for about 6 months. All of a sudden, machines with the DNE Update stopped working properly over VPN (whether using mobile broadband or not). The only fix is to unbind the DNE Lightweight driver from your network adapters, uninstall the DNE Update and reinstall the VPN Client. However, then you cannot use an aircard with VPN as the DNE Update was the fix.
Symptoms of the VPN issues with DNE Update:
-web pages displaying garbled
-internal web pages not rendering at all
-remote connectivity not working (VNC)
-RDP connects then crashes with data encryption errors
The only change that I can identify on our machines and in our environment would be Windows updates, but I've been unable to identify which one might have caused the problem.
Has anyone encountered this issue and found a fix? Does anyone know of another reliable fix for VPN Client to work with Windows 7 and aircards?
We're looking at moving to another VPN solution but that will take time and we need a more immediate solution.
Thanks in advance for your help.
Tony

Hi Prapanch
No offence . . . . but you need to read the complete thread before posting re:IP address & gateway
I'm not posting head end config because the config works with XP
There are no W7 specific parameters with ASA 8.3(2)
Multiple W7 machines have been used to test this.
We are looking at extracting level 15 logs from the client end - I will post if they don''t give an obvious answer.
TAC still not able to resolve this.
Rgds
Barry

Satellite Pro L20 doesn't work properly with USB Fast Track audio i.f.

Hello!
I have used my Fast Track USB on new Toshiba Satellite L40 and I never had problems with it. I could set low latency and I did few songs with it.
Yesterday I bought another notebook, thinking of home recording studio. It's used Toshiba Satellite Pro L20. It doesn't work properly with my interface. When I listen music on Winamp or do anything on Fruity Loops I hear loud clicks, pops, noises. They introduce samples, or they appear during playback or after a sample is stopped.
I noticed, drivers for Satellite Pro L20 are a problem. Its not supported by Toshiba anymore?! The only drivers for chipset are very old and you can download em only from Toshiba website. The chipset is ATI Xpress 200M. Its drivers are with graphic card. Recently I noticed you can download "ATI Catalyst Legacy Display Driver for Windows XP - Motherboard/IGP Drivers 9.11" and CRACK IT to make it possible to install on mobile unit such as L20. Yep its funny but its impossible to do otherwise!
things I have tried and they still not help:
# drivers replacement, original were released in 2004. I installed recent version.
# driver settings, low latency, high latency
# asio and different settings
# pluging the interface to another usb socket.
# trying what happens when I use battery and when I use adapter
# updated bios
# turned off onboard units such as wifi card, sound card
# checked IRQ list
pops still appear.
my config:
Toshiba Satellite Pro L20
Win XP Home SP3
Celeron M 1,5GHz
896Mb ram
M-Audio Fast Track USB, drivers: 6.0.2
Kind regards

Thanks for answer. I still have L40 but I try to run my homerecording on L20. The L40 is now used by whole my family. It's possible to swap them but there's a problem - L20 has Norway keyboard and I'm the only person at home who doesn't often look down while typing. In Poland, we use standard ms keyboard. I'd buy special stickers, it's about only to make special chars get back to their places.
I installed Windows on this computer end set it to best performance possible.
Since I created this thread, guys from M-Audio support tried to solve my problem - nothing helped. I think potential solutions are exhausted.
Message was edited by: lidia.pochron

Old Netscape console 4.2 not working properly with new Directory Server 5.2

After successfully installing Messaging Server 5.2 and applying patch 2, the old Netscape Console doesn't work properly, I tried running the script which is given in the link
http://docs.sun.com/source/816-6734-10/index.html
which hobbles the server by creating a set of dummy jar files in order for the directory server console not making any changes on the messaging server. At first I got these messages:
Failed to install a local copy of msgadmin52.jar or one of its supporting files: not a ZIP file (END header not found)
I got the same message for these 2 files:
admserv42.jar
msgadmin52.jar
After that I made real dummy jar files using a zero-length file I created with touch and I got these messages:
class com.netscape.management.admser.AdminServer not found
After that I erased all the files created by the script and I get these messages:
failed to install a copy of admserv51.jar or one of its supporting files: null
failed to install a copy of msgadmin.jar or one of its supporting files: msgadmin52.jar not found at http://192.168.10.205:5001/
and for admserv42.jar I get the same message
Does anyone have a clue on what to do next??
thanks in advance
Eduardo

The thing is that the netscape console 4.5 won't work properly with messaging server 5.2, and the directory server console is not working properly for the directory server. I already know the limitations about these consoles since it is explained in the doc where the procedure of migrating from a 4.x directory server to 5.1. I

Webcam doesnt work properly with Face Recognition tool

Similar Messages

Maybe you are looking for