WebCam Dosen´t Work

Hi I justo buy a computer last week and I have a problem with the web camera. The web camera is already install in the computer, i used one time and it work very well in messenger; but when I try to used for the second time the cam dosen´t work. In the image of messenger only appear a picture of like mountains or something like that and it dosent show myself to the other person. Please answer me if you know what can I do, I will be very grateful. Thank you

Hi Steph,
Can you go to the Quick Setup and verify which camera is selected? You can get there by clicking on the wrench and screwdriver (settings) icon. If the camera is selected then this is a known issue, and there is no workaround at this time. The expected fix for this will be in version 4.8, which has no ETA for release at this time.
Regards,
Jason

Similar Messages

Webcam dosen´t work after install lion , ist a macbook, help

help i have update my macbook to lion, but after this the webcam dosent work. its say no webcam install on this computer, are there som one there can help me

Here are my best suggestions for your camera problem:
• If Apple's http://support.apple.com/kb/HT2090
   suggestions do not help you, continue with the following.
• Use Disk Utility to repair permissions and then
   download and apply the 10.7.2 Combo Update:
     http://support.apple.com/kb/DL1459
• Repair permissions again immediately following the system restart
   that completes the Combo update.
The Combo version of updates can sometimes correct
strange problems like yours.
For camera problems in web video, you may need to update to the current version of Flash: http://www.adobe.com/software/flash/about/
If you need to update Flash, follow Adobe's instructions and uninstall your old Flash before installing the new one: http://kb2.adobe.com/cps/908/cpsid_90893.html

My webcam dosen't work on my new computer

I have used Jabber for a while on my HP Elitebook 8540w. Now I have a new computer HP Elitebook 8470p. The webcam works on the computer, but when I open Jabber it does not work. The name of the webcam on the old computer was HP Webcam [2 MP Macro]. The name of the webcam on my new computer is HP HD Wecam [Fixed]. This two computers have the same image and Windows 7, so I'm wondering what I have to do to get the webcam to work?

Hi Steph,
Can you go to the Quick Setup and verify which camera is selected? You can get there by clicking on the wrench and screwdriver (settings) icon. If the camera is selected then this is a known issue, and there is no workaround at this time. The expected fix for this will be in version 4.8, which has no ETA for release at this time.
Regards,
Jason

Satellite U400 - the webcam does not work anymore

Hello guys here is my sudden probloema!
About a year ago I purchased a laptop
TOSHIBA - Satellite U400
with s.o. WinVista 32bit and with integrated webcam chicony etc. ....
For a year, everything worked correctly, but for some days now, the webcam does not work anymore.
As soon as I try to open it, a message of management software cam that says "Webcam driver open fail, please restart or computer room"
I tried to do it all: aggioronato and downloaded the drivers from toshiba, uninstalled the program and re installed the webcam ....! updated bios notebook ....! useless!
the strange thing .. well that going into device manager ... the webcam is not there ....! but if the launch seems to open just then check quell caz ... Warning!!
Gan you help me?
Graziee

Are you familiar and comfortable with LINUX LIVE bootable discs to load an alternative operating system with unobtrusive but extensive Toshiba device support so you can determine if your webcam hardware is ruined or if the problem is software and possibly solved reinstalling Windows ?
At this point, you're pondering less time consuming but more expensive choices such as buying another web cam, or another computer and you might be temporarily borrowing someone else's web cam / using a non preferred spare web cam that isn't optimal for your needs.
Continuously downloading software, registry cleaners, and repeatedly reinstalling drivers will eventually ruin your Windows installation and consume more time than you've wasted so far and still doesn't guarantee to fix your malfunction.

Satellite Pro M30 Win 7 - webcam does not work on msn messenger

Hi all
I have a Satellite Pro M30 Modell Nr.: PSM35E and have just changed to Windows 7. But the Nvidia Card NVIDIA GeForceTM FX Go5200 Grafik mit 64 MB RAM does not work properly.
I could find a driver from Vista and installed it, have Aero pics on the desktop, but my webcam does not work on msn messenger and this is the only way for me to see my family.
Can someone help me?
Thanks for your help

Hi
Im a little bit confused; do you have some problems with the graphic card or with the webcam?
I assume you are speaking about external webcam connected to the USB port? Right?
What happens if you connect the webcam to the notebook? Can Win 7 recognize the connected device? Did you install additional drivers for this webcam?
In most cases its necessary to do that because I think its not plug & play device.

Gif imagen dosen't work at o.s 6.0

The gif imagen in profile bbmsn contactas dosen't work in my torch 9800 os 6.0 all my friends that have got the os 6.0 have goy the same proble, i wanna know if there are or when is coming a update to solution this problem

Hi,
the problem whit NI 9223 module and the example that you talk about is know. Indeed, there is a CAR - Corrective Action Request - #30724 that deals with the erroneous implementation of the example.
To improve the code, the owner of CAR, suggest:
Added pipelining loops and removed from FPGA VI to Increase maximum acquisition rate and modified host VI to implement proper DMA FIFO programming practices.
I try to implement and improve the code. Bye
Mario

W520 webcam no longer working after Windows 8.1 upgrade

Hello,
I upgraded my w520 from Win 7 to Win 8 last year with zero problems.
Now I upgraded my W520 Win 8 to Win 8.1 via the store download. Except the webcam everything works fine.
In e.g. the Skype desktop application, Google Hangouts or the camera app, the built in webcam no longer works.
The green light turns on, but I just get the crossed out camra icon in e.g. the Skype video options. No video.
I see there are no drivers yet for Win 8.1 on the Lenovo support site for the w520 camera.
In device manager it still shows the 2011 camera driver 1.1.0.1147 and says "This device is working properly."
But it does not work properly.
Did anyone get the camera to work or is it just a matter of waiting for a driver to be released eventually?
I tried uninstalling, reinstalling, camera is enabled in the Bios and permissions are set to give Skype and the camera app access to the camera. I also tried the W530 drives as was suggested elsewhere.
Thank you!
Solved!
Go to Solution.

try getting the communicastion utility installed under 8.1. The crossed image is the cameras security mode.
W530(2436-CTO): i7-3720QM, nVidia Quadro K2000M,16GB RAM, 500 GB hard drive, 128GB mSATA SSD, Ubuntu 14.04 Gnome, Centrino Ultimate-N 6300.
Yoga 3 Pro: Intel Core-M 5Y70, Intel HD 5300, 8GB RAM, 128GB eMMC, Windows 8.1, Broadcom Wireless 802.11ac.

Webcam no longer working in Skype

Hi All
I have a Dell laptop with an integrated webcam and for some reason last Thursday the webcam no longer work in skype. It was working the day before. It still works in yahoo. When I try to make a video call or test it under options - video settings I get a black screen with that moving circle indicating that the video is loading but it never loads. The internet connection is very fast. Has anyone else seen this issue or know how to resolve it?
Thank you in advance.
Alan

There are two main reasons why their are video incompatibilities in the newer releases.
1. The way video support was redesigned in 6.2 and above left some cameras incapable of supporting the new video mode in older style hardware. For this reason the Skype special version (6.1.x) was made available. This also resolves video incompatibility issues between very old releases (i.e. Skype for MAC OSX 2.8 and Skype Special Version for Windows allows video communication to occur between contacts vs. just audio)
https://support.skype.com/en/faq/FA12252/why-can-t-i-make-video-calls-on-the-latest-version-of-skype...
2. Bugs/incompatibilities are sometimes introduced in the newer releases like the recently reported issues with Dell XPS model cameras. In that instance, you would have to downgrade to 6.3 or below which does not have that flaw.
Skype 6.3 (the previous release)
http://download.skype.com/msi/SkypeSetup_6.3.0.105.msi
So while it may be highly inconvenient, if you are aware of the above you should be able resolve any video-related issue. I for one have been fortunate as none of my laptop webcams including the one on my Dell has failed to work in any Skype for Windows release.

My built in webcam has stopped working on Skype following an update. Does this mean my macbook air has blocked videochat on skype? How can I fix this problem?

Hi, my built in webcam has stopped working on Skype following an update. Does this mean my macbook air has blocked videochat on skype? How can I fix this problem?

See this thread:
https://discussions.apple.com/thread/5306216?tstart=0
FIX:
1. You need Time Machine
2. Go to folder /Library/CoreMediaIO/Plug-Ins/DAL/
3. Copy AppleCamera.plugin to good place (usb memory stick is the best place).
4. Go to Time machine in date that skype work fine.
5. Change AppleCamera.plugin with file from Time Machine
6. Restart system, Now skype need to work with camera.
If that doesnt pass,
Suggest looking here, much success has been found:
http://community.skype.com/t5/Mac/OS-X-10-8-5-broke-Video-on-MacBook-Air/td-p/18 91729/page/4

I have hp laptop dv9009us one day all the USB ports and webcam camera stopped working

I have hp laptop dv9009us one day all the USB ports and webcam camera stopped working, I had windows XP and tried all solutions posted on online forums didn’t work, I upgraded to windows 7 and still not working, please note that the USB is detected in device manger and it says working properly but he webcam is not detected at all, also when I connect any device to USB it gives it power and I even can charge my cell phone but it doesn’t detect any device. Is there any genius out there that can help me?
Also after I installed windows 7 I went o system information----software environment--- system drivers, and I found all USB drivers stopped by the way this was the case in windows XP as well
usbccgp            Microsoft USB Generic Parent Driver   c:\windows\system32\drivers\usbccgp.sys         Kernel Driver   No            Manual Stopped           OK      Normal No       No
usbcir   eHome Infrared Receiver (USBCIR)    c:\windows\system32\drivers\usbcir.sys Kernel Driver   No       Manual            Stopped           OK      Normal No       No
usbehci Microsoft USB 2.0 Enhanced Host Controller Miniport Driver c:\windows\system32\drivers\usbehci.sys            Kernel Driver   No       Manual Stopped           OK      Normal No       No
usbfilter            AMD USB Filter Driver           c:\windows\system32\drivers\usbfilter.sys          Kernel Driver   No            Manual Stopped           OK      Normal No       No
usbfltr   Razer Copperhead Driver         c:\windows\system32\drivers\copperhd.sys       Kernel Driver   No       Manual            Stopped           OK      Ignore No       No
usbhub Microsoft USB Standard Hub Driver    c:\windows\system32\drivers\usbhub.sys           Kernel Driver   No            Manual Stopped           OK      Normal No       No
usbohci Microsoft USB Open Host Controller Miniport Driver c:\windows\system32\drivers\usbohci.sys          Kernel Driver   No       Manual Stopped           OK      Normal No       No
usbprint            Microsoft USB PRINTER Class           c:\windows\system32\drivers\usbprint.sys          Kernel Driver   No            Manual Stopped           OK      Normal No       No
usbstor USB Mass Storage Driver        c:\windows\system32\drivers\usbstor.sys           Kernel Driver   No       Manual            Stopped           OK      Normal No       No
usbuhci Microsoft USB Universal Host Controller Miniport Driver         c:\windows\system32\drivers\usbuhci.sys            Kernel Driver   No       Manual Stopped           OK      Normal No       No
uwbusb            UWB Bus Control USB-Miniport Driver          c:\windows\system32\drivers\usbuwbmini.sys    Kernel Driver   No       Manual Stopped           OK      Normal No       No

Did you ever get this resolved? I am having the same problem and have tried just about everything for my dv9000.

Hp envy 4-1101ss webcam is not working, it appear as unknown device in windows 8

Hi,
I have a new HP envy 4-1101 ss laptop with windows 8, it came with Truevision HD webcam and it works the first days, suddenly one day it stopped work and now I only have an unknow device in my device manager.
I read several hours forums and help but I didnt find the answer.
I updated all my drivers no solution
I uninstalled all the software, installed it again from hp web page and no solution
I updated youcam and appeared the web cam but again suddenly it disappear again.
I dont know what to do, I need use my cam!!
Thanks for advance!!

Hi @LynnFlores ,
Thank you for visiting the HP Support Forums and Welcome. Thank you so much for all the steps you have taken to resolve. Very helpful. I have looked into your issue about your HP Pavilion TouchSmart 14-b164tu Sleekbook and issues with the Touchscreen after an update with Windows 8.1. Here is a document on how to troubleshoot this Touchscreen with Windows 8.1.
Please start at the top and work your way down. As they do seem silly but we need to know if something does not finish correctly.
Please note remove any and all USB devices. Disconnect all non-essential devices, as these could cause some issues.
Listed on the page shows you about a Touchscreen driver that is available. If you go into the Device manager and look under Human Interface Devices. Do you see the driver listed there?
If no, do you see something listed under other devices?
If touch functionality still does not appear to be working correctly, follow the steps listed in the document to calibrate the screen.
I hope something here helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Microsof VX 3000 or 6000 Webcam does not work with Lync 2013 under Windows 8.1

Hi,
The problem is that i cannot use the Microsoft VX-3000 or VX-6000 with Lync 2013 under Windows 8.1.
If i go in settings under Video i can see the preview from the webcam just fine, so it works there no problem.
Wenn i try to enable my camera in a conference it does not work, i get an error: Your video cannot be started.
Now, there are no Windows 8.1 drivers for the Webcam so i installed the latest Windows 7 drivers. Because of that this webcam does not work with apps, that is fine i understand the driver problem and the way the new apps work.
But this Webcam works with skype under Windows 8.1 and it works with Lync 2010 client.
The same Webcam works just fine with Lync 2013 under Windows 7.
Is there anything i could do so that i get this Webcam to work with Lync 2013 desktop client under Windows 8.1?
Thanks

Hi,
According to your description, it may be caused by driver.
You can try to install the latest version of Display Driver to fix the display issue.
Since there is no driver for Windows 8.1, I suggest you wait for updating.
You can also post a case on Windows 8 forum, thank you for your understanding:
http://social.technet.microsoft.com/Forums/en-US/home?forum=W8ITProPreRel%2Cw81previtpro&filter=alltypes&sort=lastpostdesc
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

UBLR dosen´t work in an interfaces trunk?

I´m configuring Aggregate policer in a Sup720-3B, I need to configure Aggregate Policer in a Trunk interfaces, It´s required to limit the bandwidth for vlan to L2 through an interface trunk, between two catalyst. But it´s dosen´t work. The configuration that I am using is:
S6509#run int giga 3/2
Building configuration...
Current configuration : 167 bytes
interface GigabitEthernet3/2
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
no ip address
service-policy input LIMIT
end
S6509#
S6509#show ip access-lists TRAFFIC
Extended IP access list TRAFFIC
10 permit ip any any
S6509#
S6509#show class-map Daniel
Class Map match-all Daniel (id 1)
Match access-group name TRAFFIC
S6509#
S6509#
S6509#show policy
S6509#show policy-map
Policy Map LIMIT
Class Daniel
police flow mask src-only 2000000 200000 conform-action transmit exceed-action drop
S6509#
S6509#
hostname S6509
boot system flash disk1:s72033-advipservicesk9_wan-mz.122-18.SXF14.bin
logging buffered 32768 debugging
logging rate-limit all 1000
enable secret 5 $1$Oewp$4FbojEBx0Nn.sXO1ZzhIj/
class-map match-all Daniel
match access-group name TRAFFIC
policy-map LIMIT
class Daniel
police flow mask src-only 2000000 200000 conform-action transmit exceed-action drop
S6509#show mls qos
QoS is enabled globally
Policy marking depends on port_trust
QoS ip packet dscp rewrite enabled globally
Input mode for GRE Tunnel is Pipe mode
Input mode for MPLS is Pipe mode
QoS Trust state is DSCP on the following interface
Gi3/4
Vlan or Portchannel(Multi-Earl) policies supported: Yes
Egress policies supported: Yes
----- Module [5] -----
QoS global counters:
Total packets: 233
IP shortcut packets: 0
Packets dropped by policing: 0
IP packets with TOS changed by policing: 0
IP packets with COS changed by policing: 0
Non-IP packets with COS changed by policing: 0
MPLS packets with EXP changed by policing: 0
S6509#
S6509#
S6509#show policy-map interface gigabitEthernet 3/2
GigabitEthernet3/2
Service-policy input: LIMIT
Class-map: Daniel (match-all)
0 packets, 0 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: access-group name TRAFFIC
Class-map: class-default (match-any)
0 packets, 0 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: any
S6509#

Contact the wireless carrier to which the iPhone is locked and
ask that carrier if they provide unlocking and if you qualify.
What is the exact wording of any error message you receive?

LoadingSecondFile - Dosen't work

loadMovie() loads SWFs into _root.mc1.mc2, and I use the below method to be able to identify the selected movieclip. It works when I load the first SWF but when the second SWF is been loaded it dosen't work. What may be the cause for this.
I tried unloadMovie() and removeMovieClip() to clear the movieclip before loading the new file, but no success.
function traceName():Void {
     trace(this._name);
for (i=0; i<5; i++) {
    _root.mc1.mc2["color"+i].onRelease = traceName;

Thanks Ned. But I've got an array named mc
var mc:Array = [mc1, mc2, mc3];
I'm loading the below code as an external swf as well. Could that be causing this issue?
function traceName():Void {
     trace(this._name);
for (i=0; i<5; i++) {
    _root.mc1.mc2["color"+i].onRelease = traceName;

In I tunes I cant down load a CD. I get the message "The file couldn't be convereted. You don't have write access for you ITunes media folder or a folder with in it. To change permissions, ... When I do this it still dosen't work

In I tunes I can't down load a CD. I get the message "The file couldn't be convereted. You don't have write access for you ITunes media folder or a folder with in it. To change permissions, ... When I do this it still dosen't work.

Thanks C F McBlob but I recursively changed the permissions of my Music directory meaning every file and directory beneath it, as well as the directory itself, had the write permissions added.
I used "chmod -R u+w ./Music" and chmod -R g+w ./Music" to do it.
Alas, no cigar. :-(

WebCam Dosen´t Work

Similar Messages

Maybe you are looking for