Webcam for OSX and Windows

Hi, I would like to buy a webcam that can work on OSX and Windows XP as I have two computers but only want to buy one webcam. Can anybody recommend a webcam that works on both operating systems?
Thanks.
6400 (7.5), G4 PB (10.3.x), MM (10.4.x), 15GB pod, and then some! Mac OS X (10.3.9)

I recently bought an Ezonics 1Contact Pro which works with both systems.

Similar Messages

Mac Pro - Separate HD for OSX and Windows?

Hello Mac Pro users - maybe some of you can help...
Are going to buy a Mac Pro soon - which will be used for graphic artwork and Windows games. Today I have a Mac and a PC - for the same purpose - and now I want to build the Mac Pro with a harddisk for OSX - and another harddisk for Windows (XP or Vista). Is it possible to have 2 separate HD's (or more) with each systems using the standard setup by Bootcamp - or do I have to make a partition on the OSX HD and then install Windows there?
I'm asking this pro forum because I can't get a clear answer here in Denmark where I live - a Apple supplier first said it was impossible - then 2 days later, that it was possible, but they will charge me for 2 hours of support - and in another forum some have told me it was easy - but have given me no help how to do it - and again some have told me to use some software called "rEFIt".
So is it possible - and hard to do?
If possible, please tell me in steps how to do...
BR FLASH

Boot Camp will allow you to
utilise an entire disk for Windows. If you go to the
Boot Camp web page you can actually see it in a
picture…
http://www.apple.com/bootcamp/
The only thing you need to be wary of is that the
Boot Camp Assistant will not wrok from a Mac OS X
installation that is on a RAID set. As long as you
boot mac OS X from a single drive then it's really
easy.
I had a setup for awhile of two drives in RAID-0 for my Startup drive, a backup single drive, and a separate 300GB drive just for Windows.
In Windows the "Startup" drive in Control Panel would not show the RAID-0 Startup volume, but I could startup from it by hitting Option when it rebooted.
Steve

HDD formatting for OSX and Windows

How can I format a HDD so that it is readable and writable from under both windows and osx?

My "problem" is fairly simple.
My brother gave me 2 200GB SATA disks from his Windows machine with his data and a new 500GB WD MyBook external HDD and asked me to move stuff from his 2 200GB disks onto the new external 500GB drive. I copied the data from his 200GB disks onto my Mac, then formatted the 500GB drive like I would for OSX and copied it. He could not read it. I re-formatted it to FAT32 and could not copy much. Then I formatted it to NTFS using some very very old laptop I found but could not copy anything onto it. HAHA. So now I am stuck with 400GB of his data on my HD and I need to not only give him his data, but also rid my HD of 400GB of his stuff.
I tried doing the MacFuse and NTFS-3G but it did not work. I don't have access to his computer so I can't install anything onto it.

I want to partition an external device for OSX and Windows. Opened Disk utility but Partition is not an option

I want to partition an external drive for OSX and PC. Went to Disk Utility but Partition is not an available option.

Why not? does the partition tab not exist?

Ho do I use one monitor for OSX and Windows 8.1 bootcamp

I am a long time Mac user, but find the fairly recent Apple switch to thunderbolt for monitor input very frustrating.
For several years I have ran a Mid 2010 IMac 27" and input video from a Mac Mini running Boot Camp Windows 7 using Target Display Mode on the IMac.
This worked fine until I upgraded to a Late 2013 27" IMac and discovered that the IMac has moved to thunderbolt as the input for Target Display Mode. The new late 2013 27" IMac just will not display native Windows 7 or 8 from a Boot Camp Mac anymore.
My problem is that I have two business/job related Windows apps that must run on a native windows 7 or 8 platform, and won't function under either Parallels or VMWare Fusion.
I have tried.
And there appears to be no way to get any Windows machine with DVI or Mini Display Port output to drive a late 2013 IMac in Target Display mode.
So, with great frustration, I have concluded that I need to purchase a non-Apple 27-30" monitor, and drive it with either a Mac Mini, or my Early 2013 15" MacBook Pro retina, running one of the Macs into on of the mini-Display Ports on the monitor and a native Windows 7 or 8 machine into a second mini-display port, switching between the two video inputs. The Dell 30" monitor seems to get the nod.
Has anyone found a better solution to switching between OSX and native Windows on one monitor?
Thanks...

Hi William,
I had the same experience in December 2013 and contacted Apple about it. According to Apple it's an issue of Windows with Thunderbolt. Your older iMac from 2010 is using DisplayPort and not Thunderbolt for the Target Display Mode. Note that just the connector looks the same but it's still a different technology. Please further note that the response below does not apply for the new iMac 27" with the 5K display because this iMac does not support Target Display Mode at all, hence can't be used as external display. Of course you can still attach one or two external displays to the iMac 27" 5K.
Hope this clears things up for you and the others.
Thanks,
Martin
So, here is the important part of the official response from Apple:
"... The Thunderbolt controller in an iMac is running exclusively in host mode. As such it cannot emulate a device mode Thunderbolt display. Instead it implements a custom Target Display Mode protocol that shares video between two peer to peer machines running with both controllers running in host mode. The "client" side of the driver does not exist on Windows so windows cannot speak to the "server" half in the iMac. There are no plans to implement a client driver for Windows since there is no Thunderbolt SW stack available for Windows. The reason this used to work is that the older iMacs used DisplayPort for Target Display Mode. In this scenario the iMac was able to expose the panel in such a way that it looked exactly like a Display Port Device which Windows does have driver support for. ... "
Target Display Mode: Frequently Asked Questions (FAQ) - Apple Support

External Drive for OSX and Windows

Dear all,
I read somwhere that it is possible to use an external HD which can be used as an intermediate for documents between a PowerMac and Windows 2000 computer.
The article suggested that when using the Disk Utility program of Apple, the Ext. HD should be erased using the MS-Dos modus. This I did. After that it mentioned that by clicking on the Partion tab, under the "Option" button MS-DOS file structure should be selected.
However my DU program says: "No Options Available".
I'm still using OS 10.3.9 and I will upgrade when OS 10.5 becomes available.
Question: Why is the "Options" button not available? If this is because of using 10.3.9 how can I bypass the option and make the Windows computer see the External HD as well?
Thanks for your input,
Hans.

For now, while you need 10.4.6 to select GUID partition table, you can still setup a drive with FAT32 partitions. Format it on Windows perhaps.
Disk Utility -> Partitions -> Options....
GPL/GUID for Intel Macs
APL for PowerPC
Master Record Block for Windows
With Intel Macs you can install and run Windows XP SP2, Vista, XP Pro.
Hans, right now is probably the best time to update the OS. Tiger 10.4.9 is as complete as possible probably and esp. for PPC Macs. I think it runs better than 10.3.9 did.
While 10.5 will offer something different and new, the best time to upgrade is not when it is released sometimes, but rather once it reaches 10.5.3+ (ie, a year from now or later). Play and test it but depend on it 100%? Usually there are needed changes to software and hardware to "catch up."
Right now Tiger DVD 10.4.6 are available. Apple felt it worth putting out newer DVDs.

Hard drive formatting for OSX and Windows 7 using GUID

Hey,
I am currently trying to format a 2TB WD Elements external hard drive so that I can use one half with Time Machine and the other half with Windows 7 (run using Boot Camp). From looking around online it appears that GPT is the best to use, and so using Disk Utility I formatted the hard hard drive into 2 partitions, one being Mac Os Extended (Journaled) and left the other as empty space. I then switched to Windows 7 (on the same machine) and formatted the empty space as NTFS. The problem is that now Windows 7 can see both partitions (and can see the contents of the HFS partition which I didn't think would be possible) but OSX can only see the NTFS partition (and has changed the label of the HFS partition from what I set to "disk0s2" when viewed in Disk Utility). I've probably done something very wrong, can anyone help?
Cam

you would have been fine had you set the free space to FAT instead.
You can read only from Windows to HFS unless you buy 3rd party HFS driver.
Same for NTFS only reverse.
You do not need or want to use BC Assistant for that external drive. At. All.

Shared home folder for OSX and Windows

Hello,
I am wondering if it is possible to have a shared home folder for Windows and OSX.
We have an AD and ODS. Is this possible, if it is, using CIFS?
Hope hearing from anyone
Best Regards.

hallo victor,
thanks for your answer. unfortunately this does not solve my problem. my sap landscape is more complex.
there are several sap installations in diverent windows domains and some are on as/400 (and there is another windows domain) all are in different networks and are protected by firewall. furthermore there is a rule (maybe some exceptions are allowed) that there must not be qntc connections over these firewalls.
with a shared folder between a windows workstation in one network and an as/400 in another network it works fine. but as a mentioned first - there is the problem with the sapservice<sid> userid which is to long for as/400 environment. I think there must be a tricky solution (hope so).
kind regards
helmut

License for OSX and Windows

I am interested in purchasing a copy of PSE 9, but I am unsure on the licensing rules. As far as I can ascertain, one can have PSE installed on one notebook and one desktop on the same liscense, assuming only one can be used at any given time. If that is correct, how does this apply to different operating systems on each computer? For instance, I have a Macbook Pro (running OSX 10.6.4) and a desktop PC (running Windows 7 x64). Would I still be able to use the one license across both systems?
Thanks for your help.

PSE9 is multi-platform so you can run both side by side, subject to a maximum of two installations.
If you ever need to transfer PSE9 to another computer you must first deactivate the Editor by going to Help >Deactivate (it will be grayed out in trial versions)

Data Doubler - Format for both OSX and Windows 7 to read/write?

Hello! I have a Mid-2012 MacBook Pro 13" and I've ordered the OWC Data Doubler with a 1.5TB HDD to put into the optical bay. I have a couple of questions.
1. What format should I use for the HDD to allow both my OSX and Windows 7 sides read and write to it? I have a Bootcamp partition, but if it's possible I'd like for both OSX and W7 to be able to read and write to this drive. That way, when I'm in OSX I can view iTunes and media, but if I'm in W7 I can still have the same access. That way, I don't have to worry about "Oh, I downloaded this on the windows side ... I have to figure out how to get it over to the mac side" (or vice versa). Essentially allowing the 1.5TB HDD to be a "go between" for the two.
2. This is a minor question, but will the eject button do something to the HDD if it gets pressed when the optical drive is out and the HDD/Data Doubler is in? I don't plan on pressing it, but I was wondering if I need to dig into terminal (or somewhere else) to "disable" the button or maybe just reassign it so that instead of ejecting it does some other function?
I have heard of "MacDrives" for Windows, but I haven't used it. If this is a better option (to put the HDD into Mac OS Extended Journaled and use an application to allow W7 to read/write) that's fine.
I am putting in the 1.5TB HDD. The end goal, if possible, is to allow the Windows 7 side to read/write to it. As long as it's not a "hacked together" method, I do not mind what way it's done.
Any thoughts? I appreciate it!

Use Winclone for the Windows partition and CCC for the OSX partition.

What is the Flash Player auto-update behaviour for users without admin credentials on OSX and Windows?

Hi
Does Flash Player auto-update have the ability to update systems when a user does not have administrator access on their device?
What will the results be if we enable Flash Player auto-update on OSX and Windows systems where:
1. Users are log in with accounts that DO NOT have administrator access; and
2. Internet access is granted via a proxy server, but only when a user with NO administrator credentials is logged in.
Thanks in advance.

Maria
So there's no way to completely turn off user notification AND allow background updates unless you use a locally hosted update server? That's too bad.
Reading page 26 of the manual, I see there's an mms.cfg file that you can configure, with an option SilentAutoUpdateEnable, which is described on page 32:
SilentAutoUpdateEnable
SilentAutoUpdateEnable = [ 0, 1 ] (0 = false, 1 = true)
Availability: Flash Player 11.2 for Microsoft Windows, and Flash Player 11.3 for Macintosh
Enables a Flash Player update to install silently in the background with no user interaction. Installs both the ActiveX and plug-in players when appropriate. This type of update is called a Flash Player background update.
Standard users cannot disable background updates if they are enabled by an administrator.
Depending on the type of browser, if the user has a browser open at the time of an update, the browser might not use the updated player immediately. For more information, see "Performing a background update" on page 19.
The default value is 0 to disable background updates.
So you're saying that even if we enable this option (but don't configure a local server), users may still be prompted some or all of the time?

Partitions for OSX and Win-XP, Photo Library and Scratchdisk

Hello everybody,
I have just received my 160GB hard disk for my MacBook, before installing it I have a question:
I want to run OSX, and windows XPPro
Within OSX I will be using Aperture
Within the XPPro environment I will be using CS2
Question 1.
for the CS2 envrinment I want to partition a schratchdisk of appr. 20GB. Will I be able to use this schratchdisk from both OSX and XP depending on when I use them (I am also able to run CS2 from OSX)
Question 2.
I want to access a single photo library from both OSX and XPPro, do I make an extra partition for this as well ?
I would be most pleased for any comments or alternative setups on partitioning.
I will be using Bootcamp.
Thanks in advance

I would only partition for scratch disk and running XP. For iPhoto it is best if the pictures are on the same partition as the operating system as it makes it easier to backup your data as my FAQ explains
http://www.macmaps.com/backup.html
Before partitioning, be sure to backup your data at least twice, as partitioning may cause the drive to fail if there is anything wrong with it at the low level. Apple´s Boot Camp utility theoretically can partition without wiping the drive, and other methods of running XP on your MacBook may make their own virtual partition to run XP on which you can copy over to a formatted partition with the installer´s Disk Utility if you so desire, or you can keep on your main partition. This FAQ of mine explains what those methods of running XP on Intel Macs are
http://www.macmaps.com/macosxnative.html#INTEL
You may find though you don´t have to run XP at all. There are many more compatible Mac compatible titles than you might think which you can find in the above FAQ.

Partition Map Schemes: HFS+ and FAT32 partitions with OSX and Windows

OK so I know this question has been practically beaten to death, but I keep finding conflicting information. I am using a 2011 MacBook Pro, on which I will set up Windows through Boot Camp. I recently purchased a 750 GB WD external hard drive to use with time machine for a backup on my Mac. However, I also need to be able to use part of this for Windows files. SO.. I intend to use the HFS+ partition for the the Mac (500GB) and create a FAT 32 partition (250GB) to use for backing up windows files (using it for solely computer modeling and need to be able to transfer/share files with Mac users who use Parallels as well as copying to PC desktops). My question is what to use as the partition map scheme. I have heard that when using these two partition types, a Master Boot Record is needed (so Windows can recognize the FAT32 partition) and also that a GUID partition map is required for use with time machine, meaning windows would no longer be able to read the FAT32 partition. Is there a way to reconcile this? Either using Time Machine with HFS+ partition that is set to MBR or uisng FAT32 on Windows with a GUID partition map? Also if I were to use Parallels (with a GUID setup) instead of Boot Camp, could that be the way to save the windows files to the FAT32 Partition and avoid problems with Time Machine not working with MBR? Thanks for any expertise, as I have heard that both setups that I have mentioned both will work and both will not work. Any experience with a similar situation?

Wow. Thanks for the extremely quick responses. Just for a few points of clarification.. I'm a complete newb at backing up strategies.
Steve, you would recommend to not backup files from my Mac OSX and files from Windows (also on my Mac) on the same drive, correct?
I appreciate the strategy of using it only as a backup, that makes quite a bit of sense. However, if I want to only backup my OSX files, and also store (solely as backup copies) say, a number of computer models (Rhino, Revit, etc.) that were created in Windows programs (not needing to store the entire Windows disk), would it not make sense to store these on the same drive in a different partition, creating the need for two different partition formats? And if I were to do this, maybe I should use NTFS instead of FAT32 (and reformat to GUID since that seems to be a standard for Apple and Windows 7 recognizes it..?) to keep them completely separate since the computer model files cannot be opened unless running the Windows programs.
How do you use your drive with HFS+ and NTFS if not for backups? I will not need to access the HFS+ backup files in Windows, nor need to access files from an NTFS partition in OSX, so that seems to simplify things in that, at least at the moment, I will not need any Paragon software.
Currently my drive is partitioned as HFS+ and FAT32 as MBR, with the HFS+ partition set up with Time Machine. It appears to be successful, I see my files in Mac HD -> "users" and all my docs, desktop items, etc. are listed. Seems that there is in fact no limit on TM's use of MBR maps, or else it is way above 160GB.
Third, are you using CarbonCopyClone in place of Time Machine or in addition to it? If in addition would it create the bit-wise clone on the same HFS+ partition as TM is backing up to? Or a separate drive? I'd like to only have one external that I am backing up to for simplicity's sake. I've never used TM before, so this is all new to me. Also, I suppose I have been missing the distinction between storing copies of files, and making a complete backup of a disk image... just now realizing the difference. Thanks so much.

Partition Table Looks Different Between OSX and Windows 7

Hey all,
I recently replaced the hard drive on my 2007 iMac, going from the 320GB drive to a 1 TB drive. It actually worked! The previous drive was failing in very odd ways, though booting into the Windows side (more on dual boot later) always seemed to work, and S.M.A.R.T. always reported that the physical drive seemed OK.
The previous drive (320 GB) had around 200GB devoted to OSX and 100GB partitioned off for a working Windows 7 installation (custom installed x64 Win7 Ultimate). I had the Windows system image backed up to my NAS, and had a Windows system bootable disc to restore that image.
After replacing the drive (and almost crying that I had actually done it right), I first restored OSX from a Time Machine backup, and let it take the full 1TB of space as Journalled HFS+. Then, I used Disk Utility to shrink OSX down to 500GB, and created a second partition (formatted to NTFS) with the remaining 500GB.
Now, restoring a Windows system image is an odd thing, as it tries to do a lot of partition work as opposed to simply restoring the Windows install to a partition. I tried Macrium Reflect first (made a backup in that, too), and it looked like it was going to let me restore to the second partition. It completed the restore...and the entire hard drive was hosed. Partitions had been moved, renamed, resized, and nothing was bootable. I had to use Recovery from an external USB thumb drive to go back to the single, full-drive install of OSX.
Then I tried again. Made the second NTFS partition and used the basic Windows System Restore disk to restore from the standard system image I had on the NAS. I was not expecting this to work. But it did. Windows started showing up in Startup Manager when "option" was pressed on bootup, and both OSX and Windows booted properly and ran fine. This is where I (finally) get to the supreme oddities:
OSX Disk Utility still reports two 500GB partitions, one for OSX and one for Windows.
In OSX the Windows partition shows as having NO DATA on it. Not sure what would happen if I tried to write a file to it when mounted, but there is no data on it when viewed from OSX (I was always able to see the Windows files when I mounted that partition on the previous drive).
The Windows partition does not show up as a valid bootable system in System Prefs --> Startup Disk (naturally, I suppose, since OSX doesn't think there is anything there).
From the WINDOWS side, Windows still sees the old partition table: 200GB for the "unknown" HFS partition, and then the rest of the space can be devoted to Windows (started as 100GB, but I was ablt to expand it to use the remaining ~750GB!). Windows thinks it can have 750GB of space even though I know its partition is only 500GB in size!
Windows cannot see the OSX HFS partition data using HFSExplorer. It CAN see the HFS partition on the attached backup drive (the drive I use for Time Machine).
GParted (a partition program on a Linux bootabld CD-ROM) shows the same partitions as OSX Disk Utility (2x500GB), and also thinks the Windows NTFS partition is empty (all space reports as "unused").
Did I mention both OSX and Windows work fine???
There are, of course, two other partitions on the drive: the first partition is the 200MB one I always see (EFI/GUID portion?), and then between the HFS and NTFS partitions is the 600MB recovery partition (which also shows at option-pressed boot time). OSX, GParted, and Windows see all four partitions, and in the same order. It is just that Windows sees the wrong sizes, and OSX cannot see any data in the Windows partition.
Surely this is all going to break spectacularly at some point, isn't it? What if I ever did write a file to the Windows side from OSX, or what if OSX starts taking more space than the 200GB Windows thinks is the max for that partition? What if I try to make Windows use more than 500GB because it thinks it has almost 800GB to use? What if I defrag the Windows drive?
I had no idea a partition table could look this goofy and yet still have everything be bootable and workable. Is there something I can do to get everything in sync? Basically, I am assuming I need to get Windows to do some low-level kung fu in Disk Manager in order to properly get everything lined up with the "right" partitions as reported by both GParted and OSX Disk Utility. But how do I do that?
By the way, any ideas that totally nuke the drive and start from scratch are completely fine (if it seems like they are doing something different enough that I'd give it a try). I have good backups of both OSX and Windows and have restored them about a half dozen times already as I dealt with the previous failing hard drive and with trying to get dual-boot working again. Not to mention, this iMac is now my secondary machine to the new Mac Mini I got a couple weeks back when I wasn't sure how much more life I was going to get from this 6+ year old iMac.
Thanks for listening to me ramble about this very odd issue, and a huge THANK YOU in advance to anyone who has ideas to help.
Thanks,
sutekh138

Update:
I am pretty sure the issue is a simple GPT/MBR discrepancy.
I installed rEFIt and used it's partitioning tool (gptsync built in) upon bootup. It was able to show the GPT table and the MBR table, but it thinks the second partition of the drive (the Mac OSX bootable partition) is "extended" in the MBR table and says "will not touch this disk."
However, it does look like an MBR sync should be straightforward, as there four partitions in the GPT table and four in the MBR (and MBR allows a max of four, AFAIK). I just need gptsync to relax some rules. I found a link to a supposedly newer version of gptsync compiled for OSX, so I will try that later.
First, I will try Partition Wizard, a free tool I found for the Windows side. It has a "Repair MBR" option that I would have tried last night if I weren't running a new Windows Image Backup in case all of this goes haywire. *smile* The PW tool also has an option to change the MBR over to GPT entirely. That might work, but then I am not sure Windows 7 will boot (from what I read, x64 Win7 running on EFI-enabled hardware should work, but who knows).
Anyway, I will try the following things, in order, until something works, when I get home tonight:
From Windows, run Partition Wizard and try "Repair MBR".
From OSX, download recent gptsync and try to run it.
From Windows, use Partition Wizard to do a full MBR --> GPT conversion.
Nuke the Windows partition in OSX Disk Utility, expand the HFS partition to take up the whole drive, and then add a Windows-bootable partition via Boot Camp-ish command line commands (diskutil). Because if nothing else works, I have to assume I just created the partitions wrong in the first place such that a Windows restore miraculously works, but the partition weirdness is just a timebomb waiting to happen.
Finally, if none of the above work, I'll just get things back to the way they now work and wait for the timebomb to (possibly never) go off. *smile*
I'll update this thread if I get something figured out, in case anyone else stumbles upon it...
Thanks,
sutekh138

Where to start with a licensing server for Mac and Windows

Hi all,
We have quite a mixture of OSX and Windows across the hundreds of computers we are running. We are on a volume key for all the CS3 products we buy but we still deploy them manually on a MAC but use specops (AD deployment) for the PC). There are some patches now for CS3 and for the MAC we would need to deploy it manually to a large number of machines.
What I want to do is a) set up a server for deploying software and managing the licenses and b) deploying packages for patches or getting the machines to connect to a deployment server.
I have been looking around the Adobe site but I can't find anything that outlines what I need to do to get started with this.
Thanks for any info that can be provided.
Steven

Likely your best option is to go for some 3rd party software.
As for license tracking you could look into license statistics:
http://www.x-formation.com/license_statistics/index.html
Stefan
http://kb.x-formation.com
http://www.x-formation.com/lm-x_license_manager/index.html

Webcam for OSX and Windows

Similar Messages

Maybe you are looking for