Webcam go plus

I purchased this product about 3 yrs ago and need to download updated software and driver update for XP. Does anyone know if this would be the same as video blaster . Not sure. Thanks

Yes, that's the same model, those drivers and applications will be fine.
Cat

Similar Messages

  • Creative WebCam Vista Plus on USB PCI Card (VIA VT 6212) on Windows ME - doesnt work !!

    PC turns off when the Vista Plus WebCam is connected to the USB port on my USB PCI Card
    I use a primitive Intel Celeron 300Mhz processor with 64MB RAM on an Intel 440BX-AT Chipset running on Window ME. I recently installed a USB PCI Card (based on the VIA VT 622 chipset) which is a 394/USB 2.0 Combo. The problem is my 'Creative WebCam Vista Plus' doesnt work with it.
    After I had installed the drivers on the 'Creative WebCam Vista Plus' CD - that is - without connecting the webcam to my USB PCI card the installation asks me to connect the webcam to the USB port and When I do that the PC just GOES OFF !
    It starts up only in SAFE MODE and each time I've got to restore my PC.
    How do I get the WebCam connected to my PC ?
    Thanks in advance
    Message Edited by Prabhats on 01-19-2007 08:34 AM

    9hours later and Ive given up. I cant get the Vista 64 Ultimate to work with the Audigy 2Nx usb sound card. Im very angry and very frustrated (not to mention very tired from the 2 late nights Ive spent trying to work it out). Im not a PC-noob, but am only 4days into my Vista ownership................... Im guessing now, after much research, that there will never be a driver that gets these units to work with Vista 64bit. thats pretty weak Creative. However, I dont want to use crappy onboard sound for my gaming.What is the suggestion?Should I be looking at returning this unit, and buying either the X-Fi Xtremegamer?Fatality Pro as?a highend device, or the X-Fi Xtremegamer for $00 less? Or should I be looking at another manufacturer. Would either of these x-fi gamers work with Vista 64bit Ultimate?suggestions please?

  • Creative WebCam Vista Plus - need Driver for Vis

    Hi,
    I've a problem with my WebCam. I've bougth the Creative WebCam Vista Plus and everything working fine, using WinXP.
    Now I bougth a new PC with Vista Business 64bit. I plugged in the WebCam and wondered, that the Vista drivers are not allready on bord. So I tryed to download the driver from the Creative Support Site. There I got only the answer, that there is no download available for my product... !!
    By the time I bought the Cam i thougth, that I am buying a future-proof product. I mean, even the name of the cam includes the word VISTA! Isn't that crazy
    Does everone know a possibility to get the Cam working I'm realy upset about the driver-policy from Creative.
    Another thing is, to find the german website. Why i cant usw www.creative.de I had to google the adress... http://de.europe.creative.com/welcome.asp

    Sephiroth,
    Can you click on the details for the error report and post up what it says. If it reports something about Apple causing the problem then you could try updating your QuickTime to the latest version.
    Jason

  • Video Blaster WebCam Go Plus

    i have lost install Cd f?r my webcam:angry:
    can everybody help me for the programms for this WebCam?
    greets

    On the creative website click "support", then "downloads".
    On the new page click "video or web camaras", then click "web cams", then in the 3rd box scroll down and click on "video blaster webcam go plus" and click "go".
    On the new page click on "search archi'ves".
    On the new page scroll all the way to the bottom and click on "i agree"
    And there it is.
    If you need my help e-mail me.
    [email protected]
    God is good

  • Big problem with webcam vista plus need HELP !!

    Hello Everyone !
    I own Creative WebCam Vista Plus VF0090.
    My system is windows 7 64 bit and i cant install any driver for my cam to work.
    Please help... thanks.

    Hi Itay84,
    Sorry but I don't think there is driver for your webcam. Please refer to the driver availability chart for updates.

  • WebCam Go Plus Driver and Control Program

    Just had to rebuidl the hard drive and lost all programs. I can no longer find driver, the webcam go monitor and the Control Program I used to use on Creative Site. Not a great deal of hope of finding the original CD, bought too long ago.
    Some one help please, thanks
    Narendra

    Narendra,
    If you are looking for the driver/application of WebCam Go Plus, it is available at the driver download page.
    http://us.creative.com/support/downloads/
    Jason

  • Webcam Go Plus on Notebook

    Hello, I have downloaded the driver for Creative Webcam Go Plus for Windows XP and i can get it to work correctly on my PC despite the message indicating that the driver is not digitally signed by microsoft. But when i try to install it on my Laptop Dell Latitude D60 with windows XP pro, after i receive the message indicating that it's not digitally signed by microsoft, i get a blue screen and computer restarts.
    How can i solve this problem? both the pc and laptop have the same OS and patches.
    Thanks in advance.

    Sorry,
    Should have stated that this fix only works on 32-bit version of win 7.
    Cheers

  • Creative Video Blaster WebCam Go Plus

    Hello!
    I'm trying to have copy of Video Blaster WebCam Go Plus (750) Manual..
    Who may help me? Creative Support doesn't have this document any more. If you have it, please be nice and send it to [email protected] or if you leave in Portugal please call 99224898

    Glinka,
    You can still get the manual for this WebCam from the UK download page.
    http://uk.europe.creative.com/suppor...p?type=manuals
    Jason

  • Webcam Vista Plus - Webcam Centre unable to flip images

    I just got a Webcam Vista Plus yesterday. After faultless installation, I noticed that the software itself does not have the option to flip streaming images vertically and horizontally !
    I noticed that similar software for other creative webcam has this built in functions. My previous budget logitech webcam came with its software with similar function too.
    So I wonder if there can be a patch to allow image flipping to happen.
    I use this cam mainly for realtime surveillence on my computer during work, but needs to be installed upside down on the ceiling.
    I appreciate some feedback.

    I too am experiencing the same difficulty with a PD00 web cam. My camera was to be mounted from the ceiling, and this functionality would be helpful.

  • Problems with Creative Video Blaster Webcam Go Plus and Windows XP SP2

    Hi,
    I have exprienced a big problem since installing Service Pack 2 on Windows XP. My Webcam Go Plus is now providing either a black picture or for a short time the correct picture but then the complete system breaks down. I've already read messages from other users, who had the same problem. So, I tried to install the new driver for "Creative Webcam" but it doesn't work. On the download page for my Webcam Go Plus there is only a driver from 2002, which I already installed before updating to Service Pack 2.
    Please help!
    Martin

    Hey I'm having the same problem, and thought that maybe we'd get more help if a few people had this happening? It won't even install for me, when the camera is almost done, the camera beeps twice to say its on and then my computer turns blue and dies. i dont really like that screen, so if anyone can fix it or tell me what to do?

  • WebCam Go Plus: red light doesn't stop flashing

    Hello,
    I am experiencing following problem when trying to use the WebCam Go Plus as a digital camera: I take a picture, and the red light indicating that the picture is being written to memory ("busy") doesn't stop flashing. Trying to turn off the camera deosn't work either, and the only way to stop everything is by removing the batteries and starting over again. No picture is written, though. Previous images have been downloaded, so it is not an "disk full" issue.
    Any ideas will be highly appreciated (specially by my little daughter, who is trying to take the camera on a trip).
    Thank you!

    strawinsky,
    You can try doing a hardware reset and see if it helps.
    You can find the steps at our knowledgebase article SID2096.
    Jason

  • Webcam go plus "enable to download images"

    i have an imortant pictures in my creative webcam video blaster go plus
    but a message show me "enable to download images" when i try to download it.
    if any one have a solution to recover my pictures! plz help!
    thanks a lot.

    strawinsky,
    You can try doing a hardware reset and see if it helps.
    You can find the steps at our knowledgebase article SID2096.
    Jason

  • Creative WebCam Vista Plus Installation Problem..

    Hi,
    I've got a big problem when i'm trying to install the software for my webcam.. when i put in the software CD and appears the install menu i click on "continue" to start the installation.. but then there is this strange problem ( i've no idea what it is cause im kinda computer noob xD ) something like a "problemreport" sorry for this word i'm from germany and can't translate it well^^
    There is written that DemoShield Player detected a problem and has to quit. So i can't continue with the installation.
    Does anybody know how to fix this problem?
    I have Windows XP Home Edition.. please ask me if i forgot something, it's the first time for me that i use such a forum to ask other people for help xD so don't get angry if there's something missing in my question :P

    Sephiroth,
    Can you click on the details for the error report and post up what it says. If it reports something about Apple causing the problem then you could try updating your QuickTime to the latest version.
    Jason

  • CT 7510 Video Blaster Webcam Go Plus on Windows 7 WORKING

    Hi there,
    I spent a long time trying to get this to work and was finally successful,
    I have posted to another thread: http://forums.creative.com/t5/Cameras/Videoblaster-Webcam-II-installed-on-Windows-7-MODEL-NO/td-p/55...
    I figured it might help people more if the thread title matched the issue so for my fudge just go to my other post (above).
    Hope this helps someone save some time....

    Sorry,
    Should have stated that this fix only works on 32-bit version of win 7.
    Cheers

  • Problem with webcam go plus

    hi.sorry,have problem speak engl....i am italy ............mi dice che mnca la firma digitale ...mi dice un nome di un file wcgopvid.nt,sconosciuto ?che devo fare?

    Hi Itay84,
    Sorry but I don't think there is driver for your webcam. Please refer to the driver availability chart for updates.

  • Creative WebCam Vista Plus has a built-in microphone?

    Hello, I am having problems with audio, but before trying anything, I just want to know if the I searched in products info, no answer there.
    Thank you.

    No. If you are refering to the model number : VF0090

Maybe you are looking for

  • Multiline Check in Receiver Determination

    Hi All, Can anyone explain me the exact functionality of the multiline checkbox in receiver determination. Lets say I have the following input message <node1>        <value>21</value> </node1> <node1>        <value>22</value> </node1> <node1>       

  • Hardware test not working with Yosemite, External Display not working with Yosemite

    What's wrong with Yosemite developers.... i can't connect my macbook pro with my tv and if i wanna start a hardware test, it doesn't starts it.... please help as apple *****!!!

  • Apple Stores in UK - customer service?

    I'm contemplating the purchase of an iMac or a Mini, but have been rather dismayed by the number of reports here from users who have had problems with each... iMacs shutting down, Minis with sound problems...etc, etc. However, I'm sure that with what

  • System.Windows.Forms.SaveFileDialog not working under Windows 2008 R2 Server

    I am using Windows Server 2008 R2 (64-bit) that is been virtualized with Hyper-V and it is being used as a "Remote Desktop Server". I am trying to use this PowerShell code that will open a "Save-File-Dialog" box to select the PDF file and send it to

  • Extend Fusion application Project

    Hi OTN Im currently doing this tutorial for my Final Year Project, http://www.oracle.com/technology/obe/obe11jdev/11/dev_ui/developuserinterface.html#t2s3 Im told by my supervisor to extend the project a little bit more, i nid to create a password fi