Webcam icon missing from desktop on windows 7

hi
i no longer see the desktop icon. i use the webcam frequently to click images. the device manager shows the driver installed. how do i get the icon back on my desktop ??
pl help

Hi,
You can go to start\all programs and check if webcam program list in that, then right click the icon and send it to desktop.
In addition, reinstall the webcam driver can get the icon back.
Regards,
Leo   Huang
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Similar Messages

  • IPad 2 icons go missing from desktop on rotating basis

    As stated, iPad 2 icons go missing from desktop on rotating basis. My iPad was new as of Xmas day. I have NOT synced to iTunes (I don't want to at this time) and I have NOT upgraded the software to iOS 5.0.1 (still on 5.0).
    I have downloaded about twenty apps; five of which cost money from Apple's app store.
    I don't get it. This is a new device that I have been using for less than ten days for only an hour or two a day; I don't believe new purchasers of iPads should be having to contend with icons going missing (icons take turns disappearing when swiping back and forth between the pages of app icons, the names of icons remain, however).
    I have re-booted the iPad. At first the icons all reappear and all seems well until about an hour of usage of opening up various apps and using them, and then the problem re-appears. I have done this three times now, and have resorted to just contending with the problem as the apps will still launch and they run fine, it is just that the full icon doesn't appear (only the name of the app and a missing icon above the name of the app):
    I am thinking the cause could be due to one of two problems/issues, but wonder what others' thoughts are.
    1). Glitchy App. If it is due to a glitchy app (and does not Apple test these apps before giving the all -clear to be downloaded from the Apple app store?), how best to figure out which one it is?
    2) Glitchy OS (iOS 5.0). If this is due to a glitchy 5.0 iOS, is there no other choice than to upgrade to 5.0.1? I really do not want to do that just yet unless it is necessary. [And if it is necessary, would Apple really release a glitchy iOS knowing ahead of time it had problems? Seems strange....]
    Anyone got any ideas or have been experiencing the same issue (is it a known issue)?

    And if you restore as new, you can re download the apps for free as long as you are using the same apple id. 
    If it was a single bad app, you would have said so.  If it was a common problem with the os, it would have been reported by a zillion users. 
    I think your os got corrupted. ( potentially from a bad app, or maybe just gremlins). It is a new machine, just start over.  Reload the apps in small groups so that if it is a bad app, you can narrow the issue down.

  • Airplay Icon missing from iTunes 11.0.2.26 (PC) and Genius Sidebar

    After upgrading to iTunes 11.0.2.26 my Airplay icon is missing. I've tried the simple fix that reportedly works where you switch to mini player, see the Airplay icon and then it stays when you switch to normal mode.
    Firstly the icon does appear but it is grayed out and only pops up a volume control. It does not detect, display, or allow you to select output devices, Second, it is still missing from the normal size window.
    This has been tried with and without restarting iTunes as well as reinstalling iTunes. I'd go for a downgrade but then it fails to work with the new iPads at all. I discovered that with my first iPad mini where it required an iTunes upgrade.
    Genious Sidebar
    I figured Id just downgrade to 10.6.3 to get the genius sidebar back afterwards. WRONG, it will not synch or do anything without the newer versions of the iTunes software. Genius sidebar was the best thing about the software and they kept taking it away, brought it back for a few versions, then took it away again. It was and remains my favorite way to shop for new music. The remaining so called genius functions are just plain lame.
    Airplay Icon Missing from Itunes on PC
    I can hit my Airplay devices such as Apple TV and Zeppelin Air with iPads, iPods, and iPhones. Just not from the PC Console where is previously enjoyed it the most. So I know the devices are fine. They are all on the same physical wired and wireless network. Even when I put the Zeppelin on the wired LAN there is no Airplay icon in iTunes on the PC.

    Hi. just want to tell you i had the same problem Ipad--->tv working ok iphone---->tv also working ok pc home sharing not working and airplay icon in itunes 11.0.2.26 is missing. iam running windows 7 64bit
    NOW! i can tell you in my case it was nothing to do with your router or antyvirus ip connection.
    my pc is auto updating every sunday and icon has disappeared on monday i realized this fact and i have started uninstalling windows updates one by one after each uninstall i have restarted PC each time always run itunes and check if airplay icon is back. AND THER SHE WAS fiew windows updates uninstalled and icon is back in itunes
    Now i can not remember what Update it was KB28 ..... something i didnt wright it down at the time i hope this will help someone.

  • The option "tell websites I do not want to be tracked" is missing from the Options Window/Advance/General/Browsing. How can I use the feature I do no want to be tracked by websites?

    The option "tell websites I do not want to be tracked" is missing from the Options Window/Advance/General/Browsing. How can I use and find the feature: I do no want to be tracked by websites? I am using Windows Vista, Firefox 8.0.1

    That option has been moved to the Privacy tab in Options (first item).
    *See --> https://support.mozilla.com/en-US/kb/how-do-i-turn-do-not-track-feature
    *Do Not Track is voluntary; the site you are visiting must honor your request to not be tracked --> https://www.eff.org/deeplinks/2011/02/what-does-track-do-not-track-mean
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
    Not related to your question, but...
    You may need to update some plug-ins. Check your plug-ins and update as necessary:
    *Plug-in check --> http://www.mozilla.org/en-US/plugincheck/
    *Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
    *'''''Adobe PDF Plug-In For Firefox and Netscape''''': [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
    *Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
    *Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

  • Why are the movie and television icons missing from my Apple TV menu?

    Why are the movie and television icons missing from my Apple TV menu?

    likely because it does not have a working connection to the internet
    check the settings and maybe reenter the wifi pasword

  • OS 10.4.1 Start Up disk missing from desktop

    Is it my imagination or do Macs these days have a proliferation of oddities occurring when you least expect it.
    Anyway, my problem is that I booted up my Intel 2.66 dual this morning, it started up fine, system running, apps all there etc. But then I noticed the hard disk icon for my Start Up disk was missing from the desktop.
    Its there, its mounted, its running the system, all my apps work but you can't see it to double click on it on the desktop and when you go into a finder window its not listed in the drives available.
    Its mounted, its verified, its seemingly all okay but its just not visible on the desktop or in the finder window.
    I can get to it by opening a finder window from one of the two other disks attached to the machine and then searching for something on that disk - ping - the file is returned in the finder window with the directory showing the Macintosh HD as its root. I can then select that in that finder window and it opens up the window for the disc.
    Any clues as to why this might have happened and more importantly how I can get it back.
    Cheers
    James

    Dale
    Oh yeah - just updated it ! The 2.66 dual replaced my G5 Quad which died on me recently. I must say i've been pleased with it so far. I produce CGI work for architectural projects so speed is of the essence. Needs the ram though (possibly not the 8 gig I've got but that's so i can run four renering apps at once with 1.5 gig assigned to each - which incidentally works a treat). When i first got the machine it came with 1 Gig of ram and it was horribly slow, now it flies. Ideally I'd have got a 3 ghz machine but had to buy this off the shop floor in the local Apple dealer (Cardiff) and it was the only one they had.
    So on balance I think its a pretty good machine. I've had a few glitches with it but that's down to early release UB software rather than the hardware.

  • HP LaserJet 2420 'Print on both sides (manually)' is missing from the current Windows 7 PCL6

    Dear Support,
    I have a HP LaserJet 2420 printer connected to my home network and I would like to use it from my desktop PC (connected with cable to the network) and from my notebook (connected with wifi to the network). I use Windows 7 Ultimate SP1 (EN) on both of them and I installed the current Win7 PCL6 (v5.7.0) driver downloaded from the official HP site.
    I would like to print on both sides, but the 'print on both sides (manually)' option is missing from the 'Finishing' tab of the Printing preferences option.
    If I turn to 'Installed' the 'Duplex Unit (for 2-Sided Printing)' under the 'Device Settings' tab of the Printer properties it doesn't work because this printer doesn't support the automatic print on both sides. 
    I don't want it work automatic only manual, but it is still missing. I have never experience it with much simple printer.
    Please help to solve the problem! Thank you!
    And what is the difference between the PCL5 and PCL6 and PostScript drivers?
    Kind regards,
    Szilárd Kurunczi

  • Bootcamp Icon missing from system tray...

    On the 1st computer (iMac) that I installed BootCamp with Win 7, I have an icon in the lower left system tray for changing the booting choice.
    Today I installed BootCamp on my wife's new Mac Mini and the icon is missing from the system tray. While it was about 6 weeks ago that I put BootCamp on my iMac, I don't remember doing anything that cause the Windows system tray to display the boot choice icon for BootCamp/Win 7.
    Anyone have an idea about how I can get that icon to appear on the Mac Mini.
    Both systems are running Snow Leopard with the latest software.

    Macaby there are two separate components of Boot Camp. First is Assistant which runs on the Mac side of things from OS X. It creates/deletes the Windows partition which is necessary to install Windows. Next the Boot Camp Panel software which is installed once you have successfully installed and are running Windows. It allows tweaking of the Apple hardware from within Windows. It is installed using the OS X disc and does not jeopardize your installed Windows OS in any way. This disc also contains the hardware driver necessary to optimize the hardware in Windows. In my experience this disc has never started via autorun so you will most likely have to locate the Boot Camp folder and run the setup.exe file manually.
    Don't know how much your wife uses Windows but if it's running well enough then you may want to leave it alone. Check device manager in Windows for any red or yellow punctuation marks. This will indicate a potential driver issue in Windows. Also check the Windows Experience Index for performance issues. A 1 anywhere indicates a driver issue. If you have no driver issues and Windows is running well enough you may want to leave it at that.

  • Image Adjust icon missing from tool bar

    I've got the latest Keynote running on my Macbook, but it seems to be missing the Image Adjust icon, the one that sits right next to Inspector icon on my desktop G5 running the exact same version of the program.
    I can get to image adjust through the menu bar going to View>Show Adjust Image, but on my desktop computer, there is an icon right in the Keynote toolbar.
    Can't for the life of me determine why it doesn't present itself on my laptop. Any ideas? Many thanks, Bob Krist

    Try right clicking on the toolbar and choose Costumize Toolbar (or via the View menu (it should be the last option in the View menu) then you will see a array of icons which can be placed on the toolbar as you see fit.
    and maybe the window is to narrow to be able to display the icon and it falls of at the end, there then should be an '>>' icon, which when pressed should show all the icons that dont fit.

  • List of solutions for airplay icon missing in iTunes 11 (windows)

    It seems like there are a lot of problems out there with airplay and iTunes 11.  I think it would be great if Apple or someone were to make some sort of diagnostic tool for airplay.
    I am starting this thread in an attempt to collect some of the various solutions to the airplay problems.  Hopefully, other members of the community will add other solutions that they are aware of.
    Problem: Can't find the airplay icon in iTunes 11 for windows
    1) make sure you are looking in the right place.  The icon will appear to the right of the volume slider in the normal iTunes view.  If iTunes can't find any airplay devices, this icon will not be present and the area will just be blank.
    2) For me (iTunes 11.0.5.5), I did some system work in Windows 8 64-bit, and installed AdAware, and uninstalled it.  I think this reset my firewall settings.  The airplay icon was missing from iTunes but I was able to do airplay from my iPad over the network.  I searched the start menu for "firewall", started "Windows Firewall with Advanced Security", and in the Inbound Rules list I saw that I had 5 entries that started with "Airport".  2 of them were disabled.  I double clicked on each disabled rule, and changed the action from "Block the connection" to "Allow the connection".  After hitting ok and doing this for both blocked rules, I restarted iTunes and the airplay icon appeared and everything works fine.
    3) A popular solution which has worked for me in the past has been to switch the program to miniplayer view.  There you will hopefully see an airplay icon.  Some people say you should select each of the entries in the airplay list here in order to get them to "stick."  When you switch back to normal view, the airplay icon should remain visible.
    4) I have seen someone update their dd wrt (open source based) router firmware and had the problem go away.
    5) Some have had luck unplugging their airplay device (ie: receiver) for a few minutes and then plugging it back in.
    Please add to this list if you can!

    Windows 7 64bit
    iTunes 11.1.2.32
    Apple TV (New Shape) / Airport Express 3rd Gen.
    I've had the issue of no Airplay button for the past few weeks. Strangely, it appeared randomly, but never stuck around for too long before disappearing. However, from reading this thread i uninstalled my wireless driver, and reinstalled from a generic windows search, and also installed Apple's Bonjour service (did this one after the other) and restarted my machine. All seems fine now, and the airplay button is there.
    Thank you all so much for your inputs in helping get a resolution. I hope this works for everyone else with the issue.
    Dan

  • Erasrd Zip Disk 250 IOMEGA   Zip Disk icon dissappeared from desktop

    I was experimenting for the purpose of learning how to erase a Zip Disk. It’s not necessary because you can simple remove existing folders from a Zip Disk and put new one on. This was sort of a controlled experiment.
    This Zip Disk was a back up Zip Disk (removable media). So I made copies of the existing folders and put them in a safe place. So I did not lose data. I made backups for Folders on my Zip Disk and then deliberately erased the data on the Zip Disk itself.
    I have an External IOMEGA 250 Zip Drive and I was using an IOMEGA 250 Zip Disk.
    I went to (Mac Help) to get instructions on how to erase a disk or volume.
    I opened Disk Utility I was instructed to select a Disk Volume or Image on the Left side of the window. On the left there was my
    External Hard Drive IOMEGA icon 239.0 MB and under It was the classic (White) IOMEGA Zip Disk Icon 250MB.
    I believe I selected my:
    External Zip Hard Drive Icon 239.0MB IOMEGA ZIP 250.
    Then in the dialog box to the Right I selected the (Erase) button. In the Erase dialog box I entered the following information:
    Volume Format: I Selected Mac OS Extended (Journal)
    Name: Zip 250
    Check Box: Install Mac OS.9 Disk Driver
    Regarding this (check box)
    Mac Help Stated this:
    If you plan to start up the disk in Mac OS 9 or if the disk will be connected to computer running OS 9 then check this box.
    So I checked this box
    Options Button: I checked (Zero All Data)
    Erase Button: I hit erase
    The erase procedure was not completed.
    So I went back into the Erase dialog box this time I did not select anything from the
    (Options Menu) Options were now listed as none.
    I hit erase again and this time the erase was completed.
    And upon completion I noticed that the (White) Zip 250 icon on my Desktop disappeared. I don't think that was supposed to happen.
    I did notice that the External Zip Hard Drive was still listed in the Right Panel of my Disk Utility but the (White) Zip Disk250 icon had changed it now was listed as:
    Disk1s9
    But the Zip Disk Icon itself was not showing on my desktop
    So apparently I did not execute this erase experiment correctly!
    For learning purposes I would like to receive instructions on how to get the (White) Zip 250 icon to mount so I can re-use this Zip Disk. And In the process learn the right way to do something like this. And to understand what is actually taking place.
    Let me save you some time, as you try to trouble-shoot what I have done, by telling you what action I have already taken to fix this.
    I went back to my Disk Utility:
    Selected the (First Aid) Button in an attempt to Verify and Repair Volumes:
    I Verified the Volume it was OK
    I also Repaired Volume and it said OK
    I then ejected the Zip Disk from the Disk Utility and simply reinserted it again to see if the (White) Zip 250 Icon would now be displayed on my Desktop. But it did not.
    I then ejected the Zip Disk and turned off my computer and turned it back on and tried again to mount my Zip Disk to my Desktop.
    But to no avail
    I then turned my computer off and upon restart I reset my Parameters
    Zap the Pram, as they say and that did not work.
    I then with the External IOMEGA 250 Zip Drive still plugged in to my USB Port; I again turned off my computer. While the computer was off I un-plugged the External IOMEGA 250 Zip Drive from the USB port and then plugged it back in, and turned my computer back on. I put my Zip Disk into my Zip Drive but it still did not mount the (Whit) Zip Disk Icon on my desktop.
    Each time I ejected the Zip Disk and reinserted it a Message would display:
    You have installed a Disk containing no volumes that Mac OSX can read to continue with the Disk inserted click (ignore) from following buttons"
    (Initialize) (Ignore) (Eject)
    Initialize simply opened Disk Utility.
    So I then clicked (Ignore) and proceeded back to Disk Utility to mount a new image even though I did not need to retrieve any loss data. I thought what the heck, I will try it, may be I can get my (White) Zip 250 icon back on my desktop in the process.
    So with Disk Utility opened from the above Main Menu I selected:
    Image:
    New:
    Image from disk1s9
    Results I got an Error-39 Message?
    With that I gave up and came to the Discussion Board to find out what I actually did wrong and how to repair it, and learn the right way to do something like this.
    I am guessing that the new Zip Disk 1s9 listed in the Disk Utility is a major clue. I am assuming it is in reference to OS 9.2.2, I did check that box during the erasing procedure to install Mac OS 9 Disk Driver?
    I hope I have not done any damage to my OS9 Operating System or caused OS 9 to malfunction in some way.
    I have not gone into OS 9.2.2 yet to check for any malfunctions.
    Also I thought I would mention this External Zip Driver is about 4 years old, so far it has worked well on both OS9.2.2 and OSX 10.3.9
    So, I think what I have done is pretty straightforward and I hope the solution is simple and straightforward.
    I would like some help with this so I can learn more and understand what I did and how to repair things.
    Worse case scenario I can just buy another blank Zip Disk

    Beverly:
    Welcome to Apple Discussions.
    You apparently erased the formatted volume on your zip disk, so that Mac OS does not see it as a Mac disk.
    Launch Disk Utility and select your zip disk (manufacturer ID) in left panel. Select Partition in the main panel. Name your Volume in the Name field. Select Volume Format as Mac OS Extended (Journaled). You are about to create a Mac formatted volume on a single partition of your zip disk. Click Partition.
    Let me know if this works for you.
    Good luck.
    cornelius

  • Help please....phone icon missing from screen suddenly

    Hi,suddenly I looked at my home screen and it seemed different. I noticed that the phone option is missing from the bottom of the home screen. It is usually down with the icons "mail" "safari" and "ipod". Where did it go and how can I get it back???? Thanks...

    Hello szabc,
    Welcome to the Discussions Boards!
    ride1992 is correct. You may have moved the Phone icon to another page of your home screen. Fortunately the Phone icon is not one that can be deleted - only moved. Information for editing or resetting your home screen is found in the pages ride1992 mentioned.
    If you do not have the iPhone User Guide, you can find it here:
    http://manuals.info.apple.com/enUS/iPhone_UserGuide.pdf
    Charles H.

  • Photos Beta Icon Missing from iCloud

    Starting yesterday I've tried to access the Photos beta through my iCloud account on a registered device (Macbook).
    On Chrome, the icon for Photos beta is present, but clicking in it only resulted in an error message.... Which I was just about to paste but now the icon is missing completely. The icon is also missing from Safari.
    Any thoughts or solutions from anyone else experience this? I am also told periodically by my 6 plus that the library hasn't synced in xx number of days, but I see from the forums that this another issue.
    Thanks.

    I'm getting the same problem in Safari.
    Have you sent the error report to Apple? Perhaps it will help to get the problem fixed.
    The beta page - https://beta.icloud.com  is giving the same error as https://www.icloud.com
    Perhaps this is a good sign, that Apple is working on the next release of iCloud Photo Library (Beta).

  • Webutation icon missing from browser

    Greetings all. I just noticed today that my Webutation icon is missing from my browser. I've tried uninstalling and reinstalling the addon, and it still doesn't show up. I'd really like to have it back. Any ideas on how to restore it? Thanks!

    Try to delete the pluginreg.dat file in the Firefox Profile Folder and maybe addons.sqlite as well to reset the plugin registry databases.
    See Re-initializing the plugins database:
    *https://support.mozilla.org/kb/troubleshoot-issues-with-plugins-fix-problems
    You can use this button to go to the currently used Firefox profile folder:
    *Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    It is possible that there is a problem with the file(s) that store the extensions registry.
    Delete the extensions.* files (e.g. extensions.json, extensions.sqlite, extensions.ini) and compatibility.ini in the Firefox profile folder to reset the extensions registry.
    *https://support.mozilla.org/kb/Profiles
    New files will be created when required.
    See "Corrupt extension files":
    *http://kb.mozillazine.org/Unable_to_install_themes_or_extensions
    *https://support.mozilla.org/kb/Unable+to+install+add-ons
    If you see disabled or not compatible extensions in "Firefox/Tools > Add-ons > Extensions" then click the Tools button at the left end of the Search bar to check if there is a compatibility update available.
    If this hasn't helped then also delete possible addons.json and addons.sqlite files.

  • ICloud drive icon missing from iPad

    My iCloud drive icon is missing from my iPad. I can't find a download for it in the App Sotre. Does anyone have any advice for restoring?

    There is no iCloud Drive Icon on the iPhone or iPad. You access iCloud files through the Apps that support them on iCloud, I.e. , Pages, Numbers, etc.

Maybe you are looking for

  • ITunes 10.4.1 crashing on lion while home sharing with 10.4.1 on snow leopard.

    Hello, I have a Macbook pro 2010 that was just upgraded to lion.  While streaming content via home sharing from our 24 inch iMac with snow leopard, iTunes will crash on the MacBook pro.  Both machines have iTunes 10.4.1.  Our 2008 MacBook air with le

  • ITunes album art screen saver

    Hi, recently when I use my iTunes album art work as a screen saver the albums have a purple tint to them. It hasn't always been like that so if anyone could help it would be greatly appreciated.

  • What are IDOC and ALE?

    We are getting a new system that will be interfacing to SAP via IDOC and or ALE I am required to quickly reply back as far as what will be required from a BASIS side if they will interface using IDOCS and ALEs Thank YOU and kind Regards! M.

  • Strange current VI`s path returned in standalone application

    I know that there is a difference in the path returned when using the "Current VIs path" in the development environment and in a standalone application, but this is not what I had expected: This is the path returned from the Current VIs path in the

  • Upgrading to Oracle8i 8.1.7

    Hi, I am using Oracle8i 8.1.5 EE for Linux. How to I upgrade to version 8.1.7 ? Thanks in advance. Regards, Shailesh