Webcam instant software???

I purchased a 'creative webcam instant' recently but my disc drive has stopped working, i am looking for a downloadable version of the installation disc ..... can anyone help i am dying to get it up and running!!!

If you have lost the CD, it would be best to contact Customer Support to see if they can assist you.
Cat

Similar Messages

Webcam Instant Software Issue

My girlfriend recently purchased a Webcam Instant, and somehow, in a mysterious event(pun intended) broke the Installation CD before I could install it. Is there a site that I can get the Installation Software from, like a bit torrent, or a virtual drive NFO? Or am I completely in trouble, and just wasted that money? Thanks for the help.
-James

go to this website. search for your down load under support then downloads. You can use your model number to search for your exact product download. my model number was ct6840.
http://us.creative.com/support/downl...x=2&Image4.y=2
if it wont take you right to it you may have to highlight copy and paste into address bar

Webcam instant software no longer working

After original install, the program worked great for about two weeks. Then it stopped working correctly.
Problem: It would not record at all.
Solution: reinstall.
Result: Locked program with partial launch (I could see a scrollbar for the program appear but nothing else)
Solution: Reinstall with as complete erase as I could manage. The uninstall program does not actually uninstall much.
Result: Upon reinstalling (with more than 7 attempts to completely erase this fine program) it is clear that the factory presets are not reset, rather they are set to my previous install. However, I am now able to record. Unfortunately the audio portion is played back first with a frozen image. This portion of the play back is then followed by 5-30 minutes of just frozen image. At the end of the playback comes the actual moving video image without sound.
Solution: Told by helpful Creative people that QuickTime 7 is interfering with webcam software. Uninstalled QuickTime 7 (and subsequently ipod). Then did a complete uninstall (however see above). I then reinstalled.
Result: Same as last result except that I have now lost all my music.
Any solutions, thoughts?
Yes I have removed all other USB junk. Yes I have cleaned the disk a defragged it. Yes I rebooted. Yes I followed the setup instructions. And yes I read that amazingly fine troubleshooting guide that cam with the CD as well as the equally stellar knowledge base on the web.

i had a similar problem. the video capture mode. it captures a video but wont capture if you enable audio. and then if you add in an audio compressor, it seems to capture the audio first, and then play the video track second. so you see one still, then hear the audio, then the video plays. i messed with all the codecs and to no avail. i dont know what the problem is but it seems to me that creative which is primarily a sound company should figure this out as its pretty lame to have a webcam that wont record videos properly with sound. and can i just say that this site is the hardest to use on the planet. very poor support. you should have some default box or something so i dont have to pick my region ten million times, like an english language opt out thing, its annoying.

Webcam Instant - Error code 10 on windows xp - please help

can anyone help me - i have bought thecreative webcam instant and am using windows XP. in my imaging devices i right click on creative webcam and it comes up with Device not detected Error code 10.i have uninstalled and installed about 5 times and still it comes up with this message. the software is on the computer but it says no camera device detected. the driver is on the computer though.can anyone help me to get it working. it is pluged into my usb port and windows xp states that it detects it but it may not work properly........... Thanks any novice help will help me thanks Ian - [email protected]

P4: icuuc40.dll P5: 4.0.0.3207
You're having trouble with an Apple Application Support program file. (Apple Application Support is where program files that are used by more than one Apple program are kept.) Some XP systems aren't liking the 4.0.0.3207 version of the dll that is included in Apple Application Support 1.5.0.
The workaround at the moment on XP is to either:
(1) Swap out your existing version of the dll for the 4.0.0.3205 version that was included in Apple Application Support 1.4.1.
(2) Alternatively, you could download the icu4c-401-Win32-msvc8.zip from:
http://icu-project.org/download/4.0.html
... extract the 4.0.1.0 version of the dll from that package, and replace your current 4.0.0.3207 with that.
The location of the existing file on your system is at:
C:\Program Files\Common Files\Apple\Apple Application Support\icuuc40.dll
Drag the copy you find there out onto your desktop, and then drag in the version 4.0.0.3205 or the 4.0.1.0.

Webcam instant failure to install

Hi guys, have just bought the webcam instant which comes with game star games, however neither of the 2 disc start up, each one logging a fatal error message, so i cant even install the software.
Help please!
Paul

Hi Paul,
I have experienced similar problems but have narrowed it down to the next to last level before the BIOS.
In my opinion, the installation problem is due to the last Windows Update.
I can plug and play the webcam and use it in MSN Messenger but Windows does not retain the hardware installation and then everything starts crashing after I reboot. My only option is to perform a System Restore in Fail Safe mode to get my system stable again.
I would wait until Microsoft fixes that which needs fixing and try to install it again after the next Windows Update (probably due in about two weeks from now (2nd Dec 2005))

WebCam Instant No Video

I just installed a WebCam Instant, and it's working fine on my end, i.e. it captures videos and pix. But when I started video chat session via Yahoo!Messenger, the other party didn't receive the video feed from my camera, although I could see them just fine - I deduce that to mean I have no problem with my firewall. What gives? Any help out there would be greatly appreciated.

Have you try using MSN or the webcam software?

Webcam Instant Not detected

Just got one of these webcam instants and the thing is not being detected in any way, shape or form anywhere on my PC or with in the software provided. I have downloaded the appropriate drivers from this site and still no go. So with further investigation I found that some times the bios has something to do with this? Somethng about BIOS not supporting this type of thing or getting a USB HUB with its own power source or something? Does this make sense to anyone? Anyway I have tried everything that I can except the USB hub thing (too much hassell and a buncha B.S.) and updating my bios. Im not down for that unless I absolutly HAVE to. Anyway if anyone can shed any light on this I would greatly appreciate it.
System Specs:
Windows 2000 Pro
Abit KG7 Mother Board
AMD Athlon 00
NviDia Geforce 4600 (AGP)
64MB DDR Ram

I'm having a similar problem. My WebCam Instant didn't intall ANY shortcuts. The driver is up to date and installed and the device is recognized BUT I CAN'T USE THE DARN THING. Working on it though ... will post again in -3 weeks.

Using and Troubleshooting the Dell Webcam and Dell Webcam Central Software

Please read the information at...
Using and Troubleshooting the Dell Webcam and Dell Webcam Central Software
Locate the execute file (WebcamDell2.exe) buried in...
C:\Program Files (x86)\Dell Webcam\Dell Webcam Central
Right clicked on it, then left click properties, then clicked on the compatibility tab, then changed compatibility from windows XP to Windows Vista SP 2 (the latest one they had).
If your operating system was upgraded to Windows 7, did you install the drivers in the correct order? How to Download and Install Drivers in the Correct Order
Shutdown the computer. Unplug the computer from the wall. Now remove the battery. Press and hold the power button for 30 seconds. Put the
battery back in and start the computer. Did the webcam come back?
If no, start, control panel, devices and printers. Click on add device. Is the webcam listed there?
If you recently reinstalled the operating system, did you use the preferred method? Restoring Your Computer´s Software to the Factory Settings or Restoring Your Dell Computer to Original Factory Installation with Dell DataSafe Local Backup 2.0
Please use Internet Explorer(32-bit) when navigating to My Dell Downloads :: Login. Use the same email address and password you use here. Click on add system.
***Systems purchased befor April 1, 2010 might NOT register with Dell My Downloads***
If system does NOT register after 5 minutes, then contact Dell Tech Support.
If you have XP or a system that will not register, then try using this version of Dell Webcam Central. Once it's installed, then open it, click on the ? , check for software update
Open Dell Webcam Central. In the bottom right corner, make sure the webcam is on Capture mode.
Rick

Hello Rick,
Thanks for trying to help.
Here is the info as requested:-
Host Name: DELLLAPTOP
OS Name: Microsoft Windows 7 Home Premium
OS Version: 6.1.7601 Service Pack 1 Build 7601
OS Manufacturer: Microsoft Corporation
OS Configuration: Standalone Workstation
OS Build Type: Multiprocessor Free
Registered Owner: Trevor
Registered Organization: Microsoft
Product ID: ?????
Original Install Date: 07/07/2010, 11:46:05
System Boot Time: 24/10/2011, 12:06:27
System Manufacturer: Dell Inc.
System Model: Inspiron 1570
System Type: x64-based PC
Processor(s): 1 Processor(s) Installed.
[01]: Intel64 Family 6 Model 23 Stepping 10 GenuineIntel ~793 Mhz
BIOS Version: Dell Inc. A05, 23/03/2011
Windows Directory: C:\Windows
System Directory: C:\Windows\system32
Boot Device: \Device\HarddiskVolume2
System Locale: en-gb;English (United Kingdom)
Input Locale: en-gb;English (United Kingdom)
Time Zone: (UTC) Dublin, Edinburgh, Lisbon, London
Total Physical Memory: 2,937 MB
Available Physical Memory: 1,399 MB
Virtual Memory: Max Size: 5,872 MB
Virtual Memory: Available: 4,244 MB
Virtual Memory: In Use: 1,628 MB
Page File Location(s): C:\pagefile.sys
Domain: WORKGROUP
Logon Server: \\DELLLAPTOP
Hotfix(s): 71 Hotfix(s) Installed.
[01]: 982861
[02]: KB971033
[03]: KB2305420
[04]: KB2393802
[05]: KB2425227
[06]: KB2475792
[07]: KB2476490
[08]: KB2478662
[09]: KB2479628
[10]: KB2479943
[11]: KB2484033
[12]: KB2485376
[13]: KB2487426
[14]: KB2488113
[15]: KB2491683
[16]: KB2492386
[17]: KB2503658
[18]: KB2503665
[19]: KB2505438
[20]: KB2506014
[21]: KB2506212
[22]: KB2506223
[23]: KB2506928
[24]: KB2507618
[25]: KB2507938
[26]: KB2508272
[27]: KB2508429
[28]: KB2509553
[29]: KB2511250
[30]: KB2511455
[31]: KB2515325
[32]: KB2518869
[33]: KB2522422
[34]: KB2524375
[35]: KB2525694
[36]: KB2529073
[37]: KB2530548
[38]: KB2532531
[39]: KB2533552
[40]: KB2533623
[41]: KB2534366
[42]: KB2536275
[43]: KB2536276
[44]: KB2539635
[45]: KB2541014
[46]: KB2544893
[47]: KB2545698
[48]: KB2547666
[49]: KB2552343
[50]: KB2555917
[51]: KB2556532
[52]: KB2559049
[53]: KB2560656
[54]: KB2562937
[55]: KB2563227
[56]: KB2563894
[57]: KB2564958
[58]: KB2567053
[59]: KB2567680
[60]: KB2570791
[61]: KB2570947
[62]: KB2572077
[63]: KB2579686
[64]: KB2586448
[65]: KB2607712
[66]: KB2616676
[67]: KB958488
[68]: KB976002
[69]: KB976902
[70]: KB976932
[71]: KB982018
Network Card(s): 4 NIC(s) Installed.
[01]: Realtek PCIe GBE Family Controller
Connection Name: Local Area Connection
Status: Media disconnected
[02]: Intel(R) WiFi Link 5100 AGN
Connection Name: Wireless Network Connection
DHCP Enabled: Yes
DHCP Server: 192.168.1.254
IP address(es)
[01]: ????
[02]: ????
[03]: Microsoft Virtual WiFi Miniport Adapter
Connection Name: Wireless Network Connection 2
Status: Media disconnected
[04]: Cisco Systems VPN Adapter for 64-bit Windows
Connection Name: Local Area Connection 2
Status: Hardware not present
Hope that this will help.
Thanks again
Regards
Trevor

HELP !! i need a driver for webcam instant skype edition

HELP !! i need a driver? for webcam instant skype edition for windows vista
my cam not work on windows vista
anybody can help me plz?

I'm having the same problem. So any info would be appreciated. Thanks

Big problems with creative webcam instant (sample included)

yesterday i purchased a creative webcam instant, and i am dissapointed in the quality of the video.
The frame rate is great, however there is artifacting and the video jumps around all over the place.
I have never had a problem with any other imaging devices before, so i cant see why this is happening with this camera.
This happens with the creative webcam center, and also in any other application that uses video from the camera (such as any instant messenger program)
Here is a .88 meg file to show you how the video jumps around.
http://steven.moondrummer.com/misc/space/4328.avi

Blah! The WEBCamInstant is "cheap" & nasty & for beach light only.
1. You have a USB-2?
-> calgarysteven ... 0-24-2004 09:47 PM
2. Try in WebCamCenter - Capture - Source - Exposure to Min. Too dark?

Webcam assistant software for windows 7 64 bit

i have toshiba sattellite L305d-S5893, i upgraded to windows 7 64 bit, having trouble with my webcamera, works, but it would show up little blurry and dark, even though im in a place where theres light..need to download webcam assistant software for this?? what other important downloads do i need, im not familiar with computers so the most help i get, better. thanks!

Satellite L305D-S5893 Specifications
Satellite L305D-S5893 Downloads
When you upgraded to Windows 7 64bit did you do an inplace upgrade of your Vista 64bit installation carefully following these directions?
How To Manually Upgrade from Vista to Windows 7 - Satellite L305D/355D
Or did you a clean or custom install of Win7? If you did a clean install it would be best to use the Toshiba Recovery disks that either came with your system, or that you should have created as directed on page 61 of your User's Guide, depending on whether or not your system originally came with HDD recovery partition, to restore your system to its factory default out-of-the-box setup. Then follow the upgrade procedure above.
Mike

Webcam live software

I need to download the software,,,,not the driver cause my cd/dvd/rom don't work
please help

Vilibalds,
The driver and WebCam Center software is available via the download section.
Jason

Advanced Video FX for Webcam instant!!

I got a Webcam instant, but no Advanced Video FX, or at least I see no place to download it from.
Can someone help?

hey lonewolf can you rip the setupfile from the installation cd and send it to me via email ?
my email is [email protected] or [email protected] try the first email first.
goodluck

CREATIVE WEBCAM INSTANT bad image

Hi,
mi girl have CREATIVE WEBCAM INSTANT in notebook pc w/win xp pro.
Image in photo are bad.
Example:
http://img393.imageshack.us/img393/9...gine0096qu.jpg
In messanger chat is more bad .... big pixel...
Sorry, my english are very bad.
It is possible adjust a frame rate for increasing a light ?
bye

yes, i am having this same exact problem. my image looks the same. snowy and distorted (

WebCam Vista Pro OR WebCam Instant

Hi there,
I want to purchase one good webcam. Please suggest me which one is the best among these two.
1. Webcam Vista Pro or
2. Webcam Instant
My main priority is that the webcam should deli'ver good pics at max resolution and work good at low light.
thanks and regards.
Passion80p

i'll reply since you will most likely get lots of views and NO reply -
i don't know about your internet issue. theres likely some sort of conflict between the drivers and every kind of application used to display web pages. hopefully some person @ creative or some moderator on this forum can help out more with this? anyway, i found a page with the drivers for your camera (model VF0330).
http://us.creative.com/support/downloads/download.asp?searchString=WCVI_0330_PCDrv_US___0.e xe
hope that helped a little bit.

Webcam instant software???

Similar Messages

Maybe you are looking for