Webcam light on Qosmio F60 blinks between blue and red

Hi guys, I have a Qosmio F60. The problem I think I am facing right now is that the webcam light blinks between blue and red for a while and goes back to blue. And it gets kind of hot behind the webcam on the cover of the laptop.
Is it supposed to get hot when I make video calls?
And what could be causing the blinking of the led light for the webcam.

Hi
Dont know exactly what the blinking led could mean but Ive got one question;
Does the webcam work properly? Can you use this as supposed?
If yes, then I would not be worried
By the way the cam should not get warm I think the FL inverter which is placed behind the screen is warm but this is ok.

Similar Messages

  • How Can I Blink Between Before and After in Liquify?

    I think I've done this before (in prior versions), but I'm drawing a blank...  Is there a quick way to blink between before and after results in Liquify?
    Thanks.
    -Noel

    There are several ways i can think of
    1. Alt click on the cancel button and the Ctrl+Z
    2. Hit the Restore All button then Crtl+Z
    3. If you have the advanced options showing you could use Show Backdrop and then toggle the Show Image

  • When I come from outside and press the home button to turn my iPod on, there is white, light blue and red lines but it is transparent enough that I can see my background, time, etc. It hasn't been water damaged, so that cant be the problem.

    When I come from outside and press the home button to turn my iPod on, there is white, light blue and red lines but it is transparent enough that I can see my background, time, etc. It hasn't been water damaged, so that can't be the problem. I was thinking maybe it is just because of the cold but, I don't like having my iPod doing that whenever I come back from the cold. However, I was in class too and this problem happened but it was inside! So I am very worried, I have dropped my ipod a few times but it hasn't fallen that hard to effect it.

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.             
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                                      

  • Im getting blue and red playback

    anyone know how to fix this ? when im using webcam on messenger its ok but when I record something or use remote monitoring or motion detection. and i open the saved file . the video shows in blue and red colors and in zoom mode. while im recording everything looks ok . only the finish saved product looks like this.
    i opened the files with windows media player , nero , ect... all the same
    need help i already tried changing every option there is in the menus

    anybody ? i just got the cam so I guess im a newbe. help me. this happened after i installed the new driver and webcam center, but i reinstalled the drivers and webcamcenter from the original cd again and it didn't help.
    also is the webcams light supposed to be "ON" all the time ?

  • BH-503 keeps on flashing blue and red when playing

    my bh-503 keeps on flashing blue and red when playing,was thinking that maybe it weren't fully charged, but tried playing it when charging it does the same.i think the charging is okay because the red turns into blue after an hour or so,is everything normal?
    Moderator's note: The subject was amended as the post was moved to a more appropriate board.

    When the headset is connected with your mobile phone and ready for use, the indicator light of the headset slowly flashes blue.The indicator light is red while charging and when the battery is fully charged, the indicator light turns green.
    User Guide may be found here: 
    http://nds1.nokia.com/files/support/apac/phones/guides/Nokia_BH-503_apac_ug_en.pdf
    Happy to have helped forum in a small way with a Support Ratio = 37.0

  • I sometimes have blue and red square-shaped dots appear on my MBP; especially but not exclusively when I'm watching videos.  The dots don't stay in the same place; and also they are not there all the time.

    I sometimes have blue and red square-shaped dots appear on my MBP; especially but not exclusively when I'm watching videos.  The dots don't stay in the same place; and also they are not there all the time.  Also, sometimes my animations (applications opening, windows being dragged, etc.) will glitch as well.  Again, this is not a continual thing; it just happens variously throughout my day.  MBP Model A1212, OS X 10.6.8, 2.33 Ghz 3GB RAM.

    Did the original songs that do not appear on the car player play in the Music app on the iPod? Sometimes glitches happen and they do not. Also, If y ohave a 5G iPod/iOS 7, purchase songs  will show with an cloud icon by them if they are not downloaded if Shall All is turned on in Settings>iTunes and App Store

  • Blue and red pictures

    Hi, I have just uploaded about 800 pictures into a new album within a project (I keep things filed as 1 project per month and split them into albums for each day) from a concert I covered yesterday.
    I have just had a look at a few images, seem fine as thumbnails until you go full screen, when the blue / red highlights and shadow warnings are turned on the whole picture is just blue and red (mainly blue actually) and it is impossible to get rid of it however much I do the sliders- if I turn control that off I get a pretty OK picture.
    Am running 3.5 on Mavericks in a 2007 iMac with 6gig of RAM (just upgraded from 4gig).
    I did a shoot with about a hundred pictures a few days ago and on Sunday it was fine - now it is the same - what is this program doing to me - I really wish I had kept 10.8 and Aperture 2.1 or whatever it was. Can I go backwards to revert in Time Machine I wonder ??
    How does Lightroom run under Mavericks ?
    Getting frustrated now.
    Bill

    I did a shoot with about a hundred pictures a few days ago and on Sunday it was fine - now it is the same
    After updating to Aperture 3.5 all my Canon 5d Mark II raws were showing the "reprocess raw" alert and the highlights were overexposed.
    After adjusting the raw fine tuning parameters - reducing the boost settings - they were much better, also reprocessing the raw helped.  The Boost sliders had been reset  to maximum value when I checked them.

  • My Iphone 4s was not dropped and when I went to use it the screen was completely covered in blue and red lines I can not see anything is there something that I can do to fix it?

    The screen is blue striped and when you try to reset it goes to blue and red.  Can not see anything HELP

    Bring the phone to Apple for evaluation.  Sonds like a hardware issue.

  • Iphone 6 shows blue and red screen and shut down

    since some days my iphone 6 shows blue and red screen and shut down, after some minutes it restarts, today its already down 30 minutes.
    What can I do ?

    Hello Oliver,
    Thank you for using Apple Support Communities. 
    The following article covers what you can do if your phone is restarting when you are using it. 
    If your iOS device restarts, displays the Apple logo, or powers off while you're using it - Apple Support
    Regards,
    Jeff D. 

  • Qosmio F60 - No additional touchpad and Fn function after Win 8 upgrade

    I recently installed Windows 8 on my Qosmio F60 and now I have some issues, I think it might be driver related but not sure which drivers in particular.
    1. The touchpad still works for moving the pointer but swiping along the right edge doesn't scroll anymore, I have had a look on the drivers webpage but cant find which driver I need it install to make this work. Also does anyone know if there is a Windows 8 driver so that i can swipe the edge to bring up the charms and switch tabs?
    2. The FN keys no longer work so i can't control the brightness or the other functions along the top row of the keyboard.
    If anyone can help with either of these issues that would be great.
    Thanks,
    Phillip

    Hi
    As you can see there are no special Win 8 drivers fro the Qosmio F60 series.
    Its not Win 8 supported.
    However, I think you should be able to use the Win 8 upgrade drivers released for Qosmio F750.
    Try it.
    Recommend installing the touchpad driver (from Synaptics), the Toshiba Function Key Utility, Value Added Package and Toshiba System Driver

  • Blue and red are reversed on external monitor in ppt presentation mode only

    Hi all,
    I have a mid-2012 macbook pro and I'm running OS X 10.9.5  Sorry but the problem's a bit complicated so the description is a bit long.
    After I upgraded to maverick I started having a problem at work. I am a university professor who uses my laptop to project ppt lectures onto an external monitor.  I have never had a problem with it.  I am not sure that the problem is related to maverick but it was around that time that it began to occur.
    The problem is when I project my display onto the screen before I switch into the presentation mode all the colors on the external monitor are fine, when I switch to the presentation mode on ppt (14.4.5) reds are blues and blues are reds (for most but not all, weird enough) on the external monitor, and blue strawberries are really unappealing.  It is not limited to one projector on campus, I've bothered our IT guys to death about it and they've checked the monitors (not the monitors) and they worked trying to fix my problem but they are flummoxed, I've called microsoft about it and stumped them (they refunded my service fee because they couldn't solve the problem).  My IT guys did find one work around where I changed the settings for displays in ppt from presenter view to mirror show and that worked but it created other problems in that I couldn't advance my slides easily (for each and every slide advance, I had to "pretend" to "end show" after I'd advanced and then it would advance...) so that's not a viable option either. I opened the ppt presentation in keynote and still get the same color reversal happening.  This leads me to think that it may be a maverick problem?  But I don't know.  Now my semester is gearing up and I'd love for the lovely Apple community experts to chime in and give ideas on how to solve this conundrum! I'd be so very grateful!
    Laura

    Either an update to 10.7.4 or a restart with the computer closed the entire time seems to have solved the problem. Not sure which.

  • My macbook will not turn on, the charger blinks between green and orange and the charge indicator on the side shows no light. HELP nothing happened just stopped working out of the blue

    I don't know why but my computer will not turn on! Less than 6 months old!

    If you have access to an Apple Store or other authorized Apple specialist with service department, you could take the computer in for diagnosis and repair under the AppleCare plan. Or the complementary coverage that comes with the computer if you did not buy the extended plan to add a few more years on the basic one. With the basic plan, you have 90-days support; if you bought the AppleCare extended plan, you have a total of three years support and service. Within the first year (from day of original purchase) you can buy the extended plan. Without it, a fee may be charged to test the computer. Or if there is an Apple Store with Genius bar, you could arrange to get an appointment there, and there should be no charge (in USA) to diagnose the problem.
    You can get started online, by visiting Apple Support:
    http://www.apple.com/support/contact/
    Not sure what is wrong with the computer, but an expert could tell.
    Also if you have an Apple Store nearby (or within reasonable distance) you could call ahead to set an appointment to talk to a Genius, and have them look into the issue(s) the computer may have. One determined to need repair under AppleCare can be handed off, there.
    Did you have a backup method in place to save your work off the computer, such as TimeMachine and external hard drive? I mention this because a computer going into the shop for possible repair may lose its content, and the hard drive or other parts may have failed, so your saved stuff in there could be lost.
    Hopefully they can get the problem solved.
    Good luck & happy computing!

  • Cinima Display fades Between blue and the deskop after my Mac Pro sleeps

    Hello all,
    I really hope someone can help. I have a Mac Pro Running 10.5.4 and a 23 Inch Cinema Display. When I wake my machine from sleeping the desktop appears then about a second later the screen fades blue. After a second of blue it fades back to the desktop. This continues on forever and the machine is unusable until I cut the power and restart the machine.
    The same issue will happen if the resolution on the monitar is changed.
    I have tried to reset the pram, reset the smc, take out the graphics card and then place it back. I switch the cable from port one to two of my graphics card. I also reinstalled leopard as well as downgrading back to tiger.
    When I hook the monitor up to my macbook it sleeps and awakes fine.
    Finally this morning I realized that if I discounted using the monitors built in hub then the screen will awaken without issue.
    Any idea's? Has anyone had a similar issue?

    Hi there. It could be one of your drives is actually defective and causing I/O to slow down to a crawl. To verify this, try inserting the DVD that came with your Mac Pro and restarting the machine while holding down the 'C' key. This will boot up the machine off the DVD and bypass your hard disks. If it boots quicker there could be a problem with the drives or something else.

  • Display on Qosmio F60-10U Turns Mozaic and System Getting Hang

    From The Day I purchased F60-10U; i am facing thins problem. My display occasionally Turns into Mozaic and same time System Getting Hang. only thing i can do is restart with power button.
    i had given to service center; they told that its because of virus and need to be formatted. as i was 100% sure that its not because of virus; i took back from there.
    I had tried below:
    1. Update Display Driver
    2. Downgrade Display Driver
    3. Factory reset
    4. Scan for virus with various engines
    5. Updated All Drivers
    Nothing works...
    Anybody else has got same problem?
    Hope that i can get some fix for this.
    Here is a Picture of Display when its Happens.
    Link:[http://www.glowfoto.com/static_image/11-120740L/7879/jpg/09/2010/img4/glowfoto]
    Rgrds,
    Chintan

    I dont think this issue has anything to do with virus and I believe graphic card is defective. All you have done is right and after factory image installation virus will be killed and everything should work well.
    Contact service again, let them test with factory settings and if the same will happen again I presume they will exchange motherboard.

  • Print to tape output is blinking between black and image

    This is a weird one. I printed one short film to tape this morning, went to print the second one. Except now, the output to the tape is blinking. The slate text begins to blink (instead of ending) and everything after that is blinking. To be absolutely clear: the image recorded on the tape is the film with black frames overwriting in some cadence (regular, looks like every other). This includes color bars, etc.
    This short film - unlike the previous one this morning - is 23.98 timeline. However, I've written it to tape before (maybe a year ago) and I've never seen this problem.
    Unrelated (?) the canvas shows bright green when the film plays. I have completely re-rendered.
    I am mystified by this one.

    As I stated above, I wrote out one project, no problem. The funny thing about this was that the blinking started with the slate/title - it appeared for 5 seconds (or whatever time I had specified) then began blinking.
    Have you seen this specific problem? I'm also wondering if it could be a problem with my deck. I power cycled the deck to see if that might cure it, but the problem persisted. I eventually made the tape using non-automatic means: playing it to the deck and press the record button - that worked fine. But a troubling mystery, nevertheless.

Maybe you are looking for