WebCam Live Microphone

This is my first post on this forum. The matter has probably been covered before but I'm not sure how to access it.
Yesterday I installed my new 'WebCam Live' camera and microphone. I use a headphone set with attached mic for "skype" and prefer to use the headphone mic over the WebCam mic.
I am told that there is a way to set it up so that I can do this. I did not find anywhere in the set-up that
indicated a choice was possible.
Does anyone out there use this method ?
If you can help me out here I would appreciate it.
If you care to e-mail me my address is [email protected]
Thanks...........Robert.

Thanks Jason, but the fact of the matter is that there is a definite procedure to configure the set up for a different mic other than the one that comes with the bundle. I have been in touch with "Customer Support " and this apparently is the case. However I was not able to download the page/article that they recommended as there appears to be some problem with it.
Here is the address see if you can access it --- if you can please let me know.
http://us.creative.com/support/kb/ar...asp?=3&sid=885
Thanks....Robert.

Similar Messages

Webcam Live! Specs

Does anybody know
1. Does the Webcam Live! have a built in microphone?
2. What is the field of view / viewing angle?

COuld anyone help me my webcam live is VEry VEry Very Very slow when i use it on msn like i hate this fukking webcam i got ripped off this is the last time i buy shyt off of Creative

Installing Webcam Live! on Windows Vista x64

This will inform all of the poor consumers who bought a camera shortly before vista was released, only to realize that the camera would not work with thier operating system that they would soon update too. I was very frustrated trying to get my "Webcam Live!" to work with windows vista ultimate 64 bit edition so i did some trial and error, trying basically every driver on the site.
step 1: be sure that your camera is unplugged, and you dont have any remnants of other drivers on your system, and download the driver for Windows XP Professional 64 bit located here?http://us.creative.com/support/downl...type=0&x=9&y=7
Step 2: right click the setup?icon and click properties
Step 3: click the "compatibility" tab click "run this program in compatibility mode for:" and select Windows XP (Service pack 2)
Step 4: right click the setup icon and choose "run this program as administrator" proceed with setup. The setup may get hung up, but as long as it gets to 100% before freezing you should still be okay.
Step 5: Plug your camera in?Step6: Open your device driver. In my case the driver installed correctly and that was the last step. you may have to manually install the driver by clicking on the device, clicking update driver, and then point the computer to where it was installed to. this was very frustrating for me to figure out and took me about 2 hours. i hope i saved you some time, good luck.

Maybe you can hel me
Im unable to install itunes 7.0.2 because each time I try to i get an error message saying I have insufficient access to that key...the key being HKEYlocalmachine\software\microsoft windows\...etc, etc. etc...
Can you helP???

Webcam Live Pro causes system crash with Windows XP Home

Ever since installing Webcam Live Pro I have been having random system restarts. This ONLY happens when the webcam is being used. It happens when using the Creative Webcam Center or another application. Sometimes the restart will happen after a few minutes, and other times an hour or more. I am running Windows XP sp2 with all patches, and there are no driver conflicts listed in Device Manager. I have the cam set at 60 hz.
Even though there are no listed driver conflicts in Device Manager, there clearly is a driver conflict that occurs from time to time. I have read of other people having this same problem on this forum with Webcam Live Pro. I am using the driver ...0 which is dated 0//2004, and the automatic update program on this web site says that I am using the latest driver. But in the download section of this web site, the latest driver is listed as .0.0.0 and dated November 9, 2004. The driver numbers or dates do not match, and the driver on the web seems to have an earlier number but a later date!?
Does anyone (especially a Creative tech support person who may be reading this post) have any idea what to do? The driver version is one issue. But the big issue is the system crashes.
Best,
CB

Solution! I discovered the problem causing the system crash, and I think it is sufficiently interesting to note here so that others may benefit from what I discovered. First, there is no fundamental problem/conflict with the driver for Webcam Live Pro. The trouble in my instance is that I was running another program that utilized the web cam, and that program conflicted with the Webcam Live Pro program that was constantly running in the system tray. Basically, the program in the system tray is loaded with the set-up for Webcam Live Pro. It constantly monitors the computer system to see if the cam is connected to the computer. When it does this while another program is using the cam, the conflict occurs, causing the entire computer to reboot. The solution is to right mouse click the icon for Webcam Live Pro in the system tray, go to settings, and to remove the check that allows the program to check for the presence of the web cam. Just to be safe, I then also exited the Webcam Live Pro program from the system tray so that nothing from that program could interfere with my use of the webcam using another program.
The result is that the webcam is rock solid, with no system crashes. I have been running it nonstop for hours without a problem.
I hope this helps someone else.
Best,
CB

Need driver for-webcam live!

dose anyone have a driver for-webcam live! - i have been informed that the driver for my webcam has been classified as "end of service life "thanx

Hi:
If you have already installed the graphics driver, you need to install the YouCam software.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-135497-1&cc=us&dlc=en&lc=en...

Windows 7, WebCam Live! Ultra, and Gray options

I used this camera on Windows XP and it worked fine. But recently I switched to Windows 7. There doesn't seem to be any driver for this webcam on Windows 7. I tried the beta driver for Vista and it seems to work. (green light on the camera and visible video on Webcam Center program). However, now that I'm on Windows 7, I can't seem to change any settings. They are all grayed out. These settings are causing lag to my video like frame skips. How can I fix this gray option issue?
TL;DR -> Worked on xp, switched to windows 7, options are grayed. no windows 7 drivers for WebCam Live! Ultra.

Have a look here
http://forums.creative.com/t5/Camera...it/td-p/548233
Thanks

HP Pavilion dv7 Notebook PC - Webcam and microphone issues

When attempting to use Skype or other videochat programs, I receive an error messaage asking me to enable webcam/microphone. I have gone into the control panel and checked that the integrated webcam and microphone are enabled. Perhaps the programs/drivers behind the hardware have been removed? I am not very computer savvy, but I am sure the issue is not a virus. Any help appreiated.

Hi Dingomaru,
Thank you for joining the HP Forums! I saw your post regarding the webcam and microphone. To provide better assistance can you give me your product number and your operating system please?
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Need Help installing webcam live ultra........PLEASE

I can install the software, but the cam is not working....... I'm getting a message: download win xp hotfix kb822603 or install usb 2.0......can anyone help me please.... I can access the software but my cam is NOT working......thanks for your input PS... I have win xp, webcam live ultra you can post or email me direct @ [email protected] THANKS AGAIN FOR YOUR HELP!!!!!!!

Did you install at least SP for your Windows XP? Also, have you try downloading the hotfix that the error message mention. If not give it a try since it's meant for correcting some issue of USB with SP.
Jason

Webcam Live! is fully installed...but webcam center isnt functioning...??

i have installed the webcam live! software, and the hardware a few times now and every time i do it, restart my computer, and try to open up the webcam center to take a snapshot....webcam center loads...and after like 5 seconds it says something about an error and asks me to send an error report. When i close the error message, webcam center closes automatically and this happens every time...i've done the installation perfectly according to the instructions...it says there is a step when im supposed to click "continue anyway" but i havent had that come up at all. I install the software first, camera disconnected, then when i finish the software, it tells me to connect the cam, i do so, and it completes the installation. Yet, webcam center manages to keep giving me a headache every time i try to open it by freezing up and shutting down. i have a 2006 sony vaio top of the line computer so that shouldnt be the problem XP service pack 2 home edition. can you help please?

Hi anybody with a creative instant webcam just use program Compatibility Wizard in Vista takes about 20 mins to load but runs Fine. Hope this helps Richard

Webcam Live hangs up

My Webcam Live captures good images in Remote Monitoring, and for a while sends them by ftp to my website. But sooner or later, sometimes in 10 minutes -- sometimes in 2 hours, it quits capturing, even though the red button on the Webcam Center panel keeps on blinking. Why does it stop, and what can I do about it's

COuld anyone help me my webcam live is VEry VEry Very Very slow when i use it on msn like i hate this fukking webcam i got ripped off this is the last time i buy shyt off of Creative

Webcam Live! Capture Video Not Working

I have Creative Webcam Live! Previously, I was able to use the capture function to take small video clips.
I am no longer able to do so. When I attempt to Capture a video, the screen freezes but the time does start to count up as if a video is taking. When I stop the capture, a video clip box appears on the right hand side, but it's blank. When I attempt to play the blank box, the little indicator that scrolls across the bottom of a video when it plays moves about an inch and keeps looping. Please help. I've uninstalled and reinstalled the software. Still doesn't work. Thank you.

Hi,
I'd suggest the following. First thing to do is to see if there is a live video being displayed in the webcam app. Assuming that there is then it would look like the camera is installed correctly.
There may be another capture device interfering with caputre so what would be a good idea would be to clear out the C windows twain and windows twain 32 folder. Backup the contents first then delete. You'll have to reload the camera software afterwards
Hope this helps
john

Webcam live video im

ciao a tutti...ho appena comprato una webcam live video im...ho installato correttamente i driver e tutte le applicazioni...ma ogni volta che cerco di visualizzare l'immagine della webcam o di fare una video chiamata su msn messenger il pc mi si riavvia automaticamente....cosa pu essere ki mi da una mano vi prego aiutatemi ? MOLTO IMPORTANTE...
Message Edited by beniii90 on 05-29-2007 05:39 AM
Message Edited by beniii90 on 05-29-2007 05:42 AM

jamie88 wrote:
Hey.
Anybody kno where i can download the files that come on the installation cd?
Ive lost mine and i recently got a new pc.
Cheers.
http://badboy.huh.io

Drivers WebCam Live! Pro linux

hi ! I have installed the new linux ubuntu, and Im searching the drivers for
WebCam Live! Pro
Where or when this driver will be available?
Thank you
Ps: sorry for my english, im french

OK.You guys just worked out how to get your Live Pro to get audio on Video clips!
Its quite easy and in front of you!!!!!!
In WebCan Centre select TOOLS-----SETTINGS-----CAPTURE.... In here you select VIDEO CAPTURE
and under "AVI Options" tick the "Include Audio box". Thats all!!!!
While you are there check the audio device is SB..!

Webcam Live! PRO drivers (help me choose..)

Hello,
I see 2 drop-down entries for the camera source settings in Yahoo Messenger.
1 is Creative Webcam Live! Pro
2 is Creative Webcam Live! Pro (VFW)
Which is the better one?
Appreciate ur response.
thanks

I found a fix that worked for me and I hope it works for anyone else experiencing the same issue. I had to Manually delete the UpperFilters and LowerFilters registry values.
To Manually delete the UpperFilters and LowerFilters registry values, follow these steps:
1. Start Registry Editor (Regedit.exe).
START > RUN > (Type) REGEDIT (and hit ENTER)
2. Locate the UpperFilters and LowerFilters value under the following key in the registry
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{6BDDFC6-80F-D0-BEC7-08002BE2092F}
3. On the Edit menu, click Delete, and then click OK.
NEXT: I went to my Device Manager in Windows XP > IMAGING DEVICES > CREATIVE WEBCAM LIVE! ULTRA then right mouseclicked and chose DISABLE. I Then Right mouse clicked again and chose ENABLE. Then Wallah! My webcam led cam on and the darn thing started working again.
HOW I DISCOVERED WHAT TO DOI came across a link to a similar problem regarding a CD-Rom Driver install issue returning Error Code 9. This was the same error code that I recieved when trying to re-install my webcam drivers. So I poked around the registry near a similar path (HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contr ol\Class\) as mentioned in the article found at http://support.microsoft.com/kb/34060/EN-US/ until I ran across an entry that said Imaging Devices in it.

Webcam Live pro taking lots of fotos on its own!!

Hi guys, i have the webcam live pro and when i am in capture mode ... it takes so many fotos by itself without me pressing a thing. and by alot i mena hundreds unles si close the webcam centre. can anyone tell me why this is happening and what i can do to fix it's .. thanks

Try turning off automatic exposure in the settings. And adjust some of the other settings (gamma, brightness, exposure) until you get a picture which you're happy with. And try that. In the UK, films are made at 24fps (frames per second) PAL format, and in America it's 30fps NTSC format. So yes, 30fps is as good as it gets! It's as good as TV and better than a lot of other webcams.

WebCam Live Microphone

Similar Messages

Maybe you are looking for