Webcam NX Pro with windows vista

I just bought a new comp with vista on it and can't seem to find drivers anywhere to get my nx pro to work with vista. I get an error message that says "CTPCam.exe has stopped working" and it can't find a solution. Does anyone know ANY way to make this thing work?

I too am running Windows Vista. According to Creative's website, they do not have a fix for Vista and DO NOT INTEND TO develope one. So, for all of the thousands of purchasers of NX cameras and many other Creative products, we are abondedc, left out in the cold, in other words, screwed. It apears that Creative does not care about their customers and just wants up to spend more and more money to buy their products. I for one will NOT.Montanamam

Similar Messages

Installing QT Pro with Windows Vista

Recently purchased new computer with Windows Vista Home Premium OS. Downloaded QT version7. Tried to use QT Pro license key that worked for QT7 on my previous computer but it won't work. Any reason it shouldn't? Any suggestions?
HP d4790y Other OS Windows Vista Home Premium

Make sure you're entering in both the user name and key code exactly as in the email Apple sent you. Any error in either, including leaving off a salutation (for instance, if the email says "Mr. John Smith") will cause the registration to error.
Also, make sure that your key is for QuickTime 7 for Windows. A key for an earlier version of QuickTime, or a key for the Mac version of QuickTime, will not work.

Making iSight work with Windows Vista on VirtualBox

I have a MacBook Pro with Windows Vista installed on the VirtualBox platform. The only problem I have is that it will not work with the iSight camera. I need the cam for video conferencing on a webring, and I do have to run the ring in Windows. When I start the ring, the camera comes on but I never get an image. The image screen just says "Initializing" and shows a counter showing the seconds elapsed. Is there a driver I can install, or some sort of workaround?
Thank you,
Leah

Hi,
Then you need to get at least the Snow Leopard Install Disk at the $29 price.
The Original Disks will be grey and are Model Specific.
That is to say that any Grey disks for an iMac for example are only useful to Reinstall the OS on another iMac from the same Production range - say Early 2008
7:27 PM Thursday; November 11, 2010
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

Cannot install sofware for HP Office jet 8625 Pro on my Dell Inspiron 15 with windows vista?

Cannot
install
software for HP Office jet 8625 Pro software on my Dell Inspiron Core 2 processor with Windows Vista?

Hi @akcarl
What happens when you try to install? Does it freeze, do you get an error message, or perhaps you simply can not find the appropriate software to download?
Please post back with some additional detail so I can better assist you. Thanks.
In the meantime, if the issue is nothing but finding the software, you may use the following link; OJ8620_198.exe
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

WebCam Vista not working with Windows Vista

Dear All,
Pls help me, I have a new laptop with Windows Vista Home Premium, but i bought a Creative WebCam Vista (one with 3 legs and round cam-head)i think i found the right software, but the installation is not completed giving error message, and its not allowing to compelete the installation, Anyone from this forum or from creative team, please help me,
Thank you,
dixondubai

Please, run the DirectX diagnostics tool. Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post. Be aware that you will have to zip this file before attaching it here.

Error multisim 10 with windows vista

Hi, I have seen that multisim 10 is not compatible with windows vista, when I installed all is ok, but when I try to run the programs it marks an error, with autoroute.dll (998) or something like that, I know that in this forum is already a similar post, but it has not answer, and it is since 2007. I hope you can help me, thank you

Hello,
Multisim 10.0.1 is compatible with Windows Vista, and this is a free update. Go to the Drivers and Updates page, and select your edition (Student, Educational, Power Pro).
Regards,
Fernando D.
National Instruments

ITunes error when launching with Windows Vista Laptop

The iTunes application could not be opened. You do not have enough access privileges for this operation. How do I resolve this. I reinstalled, I checked permissions for my account, and I checked permissions for the folders. I am using a Windows Vista laptop.

Hello,
Multisim 10.0.1 is compatible with Windows Vista, and this is a free update. Go to the Drivers and Updates page, and select your edition (Student, Educational, Power Pro).
Regards,
Fernando D.
National Instruments

Install disk doesn't work with Windows Vista

I just bought a new HP Color LaserJet Pro MFP M277dw and the install disk isn't compatible with Windows Vista. Apparently there's no ful feature option for Windows Vista on an HP laptop. After several hours of work I downloaded several drivers and got the printer to print, but the scan function doesn't work that well without the HP software which hasn't been created for Windows Vista.

I am having a very similar problem but do not have an answer either. I am running an X61 Type 7676A12 with a Lenovo ACP50 port replicator FRU part number 40Y8160. I am running Windows XP Pro. The port replicator has never been very great and would not restore the external monitor picture properly when the laptop had been in sleep mode however it was serviceable if not optimal. After downloading and installing the October MS security updates the machine would get a BSOD when the port replicator was plugged in. Remove the replicator and reboot and it worked ok. Plug it in again and BSOD. I tried upgrading the drivers from 5.1.4a to 7.1.1.03Aug07 and then to 7.1.2. No go. Emailing Targus with the problem got no response. The port replicator is now relegated to my junk heap of useless rubbish.

ACROBAT XI - DOES NOT WORK WITH WINDOWS VISTA

WHY DOESN'T THE COMPANY STATE ACROBAT XI PRO DOES NOT WORK WITH WINDOWS VISTA.
THE COMPANY NEEDS TO WARN PEOPLE. THE ACROBAT TECH SUPPORT FINALLY FIGURED OUT THAT IT'S NOT COMPATIBLE WITH WINDOWS VISTA.

The Acrobat website and the box lists the compatible OSs. You want Adobe to list all of the incompatible OSs---going back how far.
Acrobat XI Pro system requirements
These system requirements are for Adobe® Acrobat® XI Pro software, v11.0. Because system requirements change with each software update, refer to the Release Notes for your software version for the latest information on supported operating systems and browsers.
Windows
1.3GHz or faster processor
Microsoft® Windows® XP with Service Pack 3 for 32 bit or Service Pack 2 for 64 bit; Windows Server® 2003 R2 (32 bit and 64 bit); Windows Server 2008 or 2008 R2 (32 bit and 64 bit); Windows 7 (32 bit and 64 bit); or Windows 8 (32 bit and 64 bit)
512MB of RAM (1GB recommended)
1.85GB of available hard-disk space
1024x768 screen resolution
DVD-ROM drive
Internet Explorer 7, 8, 9, or 10; Firefox Extended Support Release; or Chrome
Video hardware acceleration (optional)
Note: For 64-bit versions of Windows Server 2003 R2 and Windows XP (with Service Pack 2), Microsoft Update KB930627 is required.

Installing Webcam Live! on Windows Vista x64

This will inform all of the poor consumers who bought a camera shortly before vista was released, only to realize that the camera would not work with thier operating system that they would soon update too. I was very frustrated trying to get my "Webcam Live!" to work with windows vista ultimate 64 bit edition so i did some trial and error, trying basically every driver on the site.
step 1: be sure that your camera is unplugged, and you dont have any remnants of other drivers on your system, and download the driver for Windows XP Professional 64 bit located here?http://us.creative.com/support/downl...type=0&x=9&y=7
Step 2: right click the setup?icon and click properties
Step 3: click the "compatibility" tab click "run this program in compatibility mode for:" and select Windows XP (Service pack 2)
Step 4: right click the setup icon and choose "run this program as administrator" proceed with setup. The setup may get hung up, but as long as it gets to 100% before freezing you should still be okay.
Step 5: Plug your camera in?Step6: Open your device driver. In my case the driver installed correctly and that was the last step. you may have to manually install the driver by clicking on the device, clicking update driver, and then point the computer to where it was installed to. this was very frustrating for me to figure out and took me about 2 hours. i hope i saved you some time, good luck.

Maybe you can hel me
Im unable to install itunes 7.0.2 because each time I try to i get an error message saying I have insufficient access to that key...the key being HKEYlocalmachine\software\microsoft windows\...etc, etc. etc...
Can you helP???

Protools 8 compatiblity with Windows Vista and which proper audio interface?

O K i have a compaq presario pc notebook with a cpu of 2.16 ghz and 160 gb(?) hard drive with 32 bit w/ Window Vista service pack 1. I've done a little research and it seems my computer may be compatible but i'm not sure Is ne one using pt 8 with windows vista with no problems? also i'm not so sure about which audio interface i should be using psi, firewire,or usb even though i have 2 usb ports im hearing its not the best choice dealing with latency and all. Is ne one using pt 8 with window vista using a usb audio interface or even firewire with any problems? thanx hope to hear from you soon!!!!

Hi again chamille2010,
Well my take would be that your rig would run Pro Tools 8 but you might struggle with the latency a bit. I ran Pro Tools LE on a PC (with significantly lower specs than yours since it was 3 years old at the time) with a Digi 002 as my firewire interface and I did have issues with latency, which is my biggest pet peeve. That was also on the XP Operating System so you might be better off with Vista SP1. I would recommend going with the Digi 003 via firewire and maxing out your RAM for best results. USB would definitely be slower and might be a cause for latency if you run into it.
That's my opinion. Digidesign has a pretty in-depth site for making sure your system will run Pro Tools. I'm sure you've already checked it out but just in case:
http://www.digidesign.com/index.cfm?langid=100&navid=54&itemid=23954

Appcrash with multitrack sessions in Audition CS6 on a MacBook Pro with Windows 7

This is an issue with multitrack sessions different from 44100 Hz in Audition CS6 (as part of a Premium Suite CS6). While multitrack sessions with a sampling rate of 44100 Hz works normally (as long as I use clips with 44100 Hz) any other sampling rate causes an APPCRASH (s. below). Also with the insertion ( in a 44100 Hz multitrack session, of course) of any clip with a sampling rate different from 44100 Hz, the programme crashes in the moment it's going to generate a adapted copy for the multitrack timeline.
Audition is installed on a MacBook Pro Retina 15" ,Mid 2014, Model 11,3, Intel Core i7 4870HQ 2,5 GHz, 16GB RAM with Windows 7 SP1.
I tried all advices of the Adobe troubleshooting site and some of the community.
Especially:
- the simplified mode with user-defined system start
- deactivated user account control
- new user account
- deactivated data execution prevention (DEP)
Also the use of different audio interfaces affords no effect:
- build in Cirrus Logic CS4208 with MME drivers
- Motu UltraLight mk3 hybrid via USB with Asio drivers.
In spite of an extensive search I can't find any similar case in the net.
So, please, can you help me?
Sorry, it's a german version of windows 7:
Problem signature
Problemereignisname:    APPCRASH
Anwendungsname:   Adobe Audition CS6.exe
Anwendungsversion:    5.0.2.7
Anwendungszeitstempel:           505806ee
Fehlermodulname:    StackHash_0a9e
Fehlermodulversion: 0.0.0.0
Fehlermodulzeitstempel:           00000000
Ausnahmecode:        c0000005
Ausnahmeoffset:       45ef2b00
Betriebsystemversion: 6.1.7601.2.1.0.256.48
Gebietsschema-ID:   1031
Zusatzinformation 1:    0a9e
Zusatzinformation 2:    0a9e372d3b4ad19135b953a78882e789
Zusatzinformation 3:    0a9e
Zusatzinformation 4:    0a9e372d3b4ad19135b953a78882e789

I'm afraid you are right. At the worst I'm more than 50% of the audition users on a mac with windows.To solve the problem within a passable time I would like to change to the mac version of audition. But unfortunately it's impossible to use the mac version with a windows licence. And CS6 licences (mac audition) are not longer available (only at a moon rate).
Because of the weekend we can pass the time with the latest news of my trouble-shooting.
The crash is not only within the multitrack session but also within the waveform view: when I try to change the sampling rate (Edit -> Convert Sample Type) the programme crashes with the same problem signature. And here it crashes with all sampling rates , including 44.1k audio files. On the other hand I can play all sampling rates within the waveform view.
I compared the logfile from the predecessor of the MacBook , a LG Notebook with windows vista and a working Au CS6 with the current logfile of the Mac: They are identical at the beginning and at the end (termination sequence). But after " Initializing AuScripting" there is a "DLMS 6.0x39 FileServer startup code: 0" and the listing of a couple of codecs in the Notebook logfile - but not so in the Mac logfile.
Also the logfile of my workstation with a working Au CS6 shows this "DLMS 6.0x39 FileServer startup code" - line. Because of the two working and one crashing computer this part of the logfile seems to be important ??
Logfile audition predecessor (Notebook) - detail
A blank line is only to arrange the logfile more clearly - it doesn't stand for missing lines.
Ticks = 60014      <4068> <AuLog.DisplaySurface> <5>     Initialize PRM
Ticks = 60014      <4068> <AuLog.DisplaySurface> <5>     Initialize DS
Ticks = 60076      <4068> <AuLog.DisplaySurface> <5>     DS Initialize succeeded
Ticks = 60076      <4068> <AuLog.DisplaySurface> <5> Video Panel is using the Display Surface
Ticks = 64304      <4068> <AuLog.Startup> <5> Initializing AuScripting
Ticks = 86191      <3796> <AuLog.Plug-in> <5> DLMS 6.0x39 FileServer startup code: 0
Ticks = 86191      <3796> <AuLog.Plug-in> <5>     AVI Movie (*.avi)
Ticks = 86191      <3796> <AuLog.Plug-in> <5>         *.AVI
Ticks = 86191      <3796> <AuLog.Plug-in> <5>     FLV (*.flv)
Ticks = 86191      <3796> <AuLog.Plug-in> <5>         *.FLV
Logfile MacBook Pro - detail
Ticks = 3510      <3976> <AuLog.Startup> <5> AuUI initialization sequence complete.
Ticks = 3869      <3976> <AuLog.DisplaySurface> <5>     Initialize PRM
Ticks = 3869      <3976> <AuLog.DisplaySurface> <5>     Initialize DS
Ticks = 3900      <3976> <AuLog.DisplaySurface> <5>     DS Initialize succeeded
Ticks = 3915      <3976> <AuLog.DisplaySurface> <5> Video Panel is using the Display Surface
Ticks = 4493      <3976> <AuLog.Startup> <5> Initializing AuScripting
Ticks = 22948      <3976> <AuLog.Plug-in> <5> Loading AMIO plug-in: AmioWav
Ticks = 22948      <3976> <AuLog.Plug-in> <5> Audition Wave Amio-Plug-In. ID: 60df8553-00c8-4fd7-8a07-6f25e30ab79c
Ticks = 45958      <3976> <AuLog.Shutdown> <5> AuUI termination sequence started...

Search drivers for Creative webcam N10225, PD1110 on Windows Vista 64

I'm searching drivers to run my webcam on a Pc with windows vista 64
Creative webcam N10225, PD1110
Thank You

I'm in a similar situation with the Intel 6850, 4 MB of RAM, and the Xi-Fi Extreme Music. I am running VISTA Home Premium 64 bit. I bought my new computer at the end of Sept. and the sound has been on and off mostly off since then. Most of the time I just get static. I have the latest driver installed (I think its Nov. 4) but very, very poor sound.

Sync with windows vista

if a sync my iPhone with windows vista i can do all what i can do if i have mac os x?

I have outlook 2007 and my contacts, calanders all sync. I have another iphone that syncs to an imac and I do not see any difference in the ability to sync music, movies etc., except that the imac does it a lot faster than my dual core vista. Both are new machines but the Imac is about 65% faster at least. Hope this helps and enjoy your phone. I convinced my wife to chuck her blackberry curve (3 months old) for the iphone and now she's telling all her friends what a great improvement she made with her choice and she surfs the net, plays music and syncs like a pro.

Problem Laserjet 1000 with Windows Vista 32 bit

Good morning. I have a laserjet 1000 connected to the USB port on another computer with windows xp and shared. I have to connect it to another pc with windows vista pc with ip address. Install the printer but does not work. I used the driver for win xp as I read on several forums but it does not work. What kind of driver should I use ?
Can you give me some advice ?
Thank you

If your model is lacking the correct Vista drivers from Lenovo and Vista doesn't offer native support then I see upgrading to Windows 7 as your only option. Here is a link to what Lenovo drivers are available.......
http://support.lenovo.com/en_US/downloads/detail.page?&DocID=DS035825
Owner & Operator of the following:
● Lenovo Ideapad Z570 w/ Win 7 & Win 8.1 Dual Boot ● Lenovo Yoga 3 Pro w/ Windows 8.1 ● Toshiba A75-S206 w/ Win 7
● IBM Thinkpad T-23 w/ Win XP ● IBM Thinkpad T-22 w/ Win XP • As well as multiple desktops dual/triple booting XP, Vista and Win 7.
★ Find a post helpful? Thank that member by clicking on the ☆Star☆ to the left awarding them a Kudo.
★ Posting a problem and a reply is helpful and it answers your question, please mark it as an "Accepted Solution"
★ I'm not a Lenovo employee, just a volunteer geek who likes to help folks. Enjoy your time here, pay it forward by helping others !
★ Sorry, I don't answer questions via Private Messages. Posting in the appropriate forum is the best way to get assistance.

Webcam NX Pro with windows vista

Similar Messages

Maybe you are looking for