Webcam NX Ultra cannot load windows 7 drivers

Hi please help - I was so excited to see the windows 7 drivers for my webcam NX ultra - but I cannot load them . Installation wizard gets to a certain point and then it says driver installation failed. I have tried unistalling the camera, unistalling anything with creative in the title in my registry - always same result installation fails - PLEASE HELP - if I cannot get this to work I will bever buy another creative product - my logitech camera which is 5 years older has windows 7 drivers and works fine. Com-on creative get with it

Here
http://support.creative.com/Products/ProductDetails.aspx?catID=218&CatName=Web+Cameras& subCatID=219&...
but I see now it was not for windows 7 - it comes up when you do search and windows 7 guides you to the page...
Looks like I will just buy logitech products in the furure :-(

Similar Messages

HP Premium C410A Cannot load printer drivers eith from disc or download

HI, i have moved the printer to another computer and on this computer (Windows 7 64 bit) i cannot load the drivers from either disc or online. when going through the install procedure it gets to checking for updates, downloading updates and as soon as it starts installing updates it just custs out of the whole installation with no message or another - the whoel installation just disappears.
i have disabnles the anti virus, tried online down loading drivers but it will not load at all;.
Internet connection is a little slow but otherwise the whole machine seems to be in working order including printer.
look forward to your replies.
thanks
GB
This question was solved.
View Solution.

Hi,
Launch the installation once again and follow the steps till the licence agreement.
Clcik the 2nd lnk (Internet Connection Usage) and select No, Thanks for both of the questions.
Confirm the changes, accept the license agreement and follow the installation.
May you see any difference?
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Cannot load windows xp but windows 98 runs fine with KM4M-V

Why wont windows xp load into my new motherboard when windows 98 runs fine.
AMD Athlon 2400+
256 mb ram
80 gb Seagate baracuda

As I first said I cannot load windows xp but windows 98 runs fine.
I have formated the drive into ntsc and fat 32 but as soon as the setup process has finished in xp and it wants to load the system posts the Blue Screen of death.
Why does windows 98 run without any problems .I have checked memory ,ram,pro and hdd but all are fine.This one puzzles me!!!.
I understand from other feeds it could be the power supply not beefy enough but if that was the case why does windows 98 run so well??
Amd Athlon 2400+
Seagate Baracuda 80gb
Seimens 2100 ddr total 768 on two sticks
DVD rw-
dvd rom drive
FSB Power supply 250watt
3.3v - 16a
5v - 25a
12v - 13a

Cannot load Windows 7 - Satellite C660 keeps freezing

Hi Everyone.
This is a biggy. I have a Toshiba AMD Vision Satellite C660 / C660D laptop with no Windows installation disc. Last week it became very sluggish, then the interface resembled that of the safe mode interface and it finally became completely unresponsive, therefore, via F8 on start- up I selected the option which allowed for it to revert to factory settings (I no longer have this option)
The DOS screen appeared and started loading as normal then that become unresponsive so I restarted only to see Windows start up for the first time and carry on loading, prior to this I had to create a boot cd from my other laptop to reboot the system as I had lost the boot mngr.
The last part of the installation process began whereby a white Toshiba screen is displayed with a green progress bar that loads certain drivers (see attachment). There are 39 steps to this process and I seem to remember from before that the computer should keep restarting itself, but it keeps freezing after about two steps. I kept switching it off and eventually the system administrator locked my accounts.
Once again I restarted the PC but this time in safe mode The operating system did indeed load in safe mode and I created some new accounts with administrator privileges, however, I am still unable to load the whole operating system as it keeps freezing during the last part of the process.
I have very limited knowledge of loading operating systems so any help would be greatly appreciated.

Hi
First of all it was a big mistake NOT to create an Toshiba recovery disk.
The HDD recovery which you were able to start by pressing F8, is only possible if the HDD is not faulty.
I think in your case I think there is something wrong with the HDD because there was an boot mgr notification which means that notebook cannot find an boot manager in order to boot up the system.
I have no other idea as to try to reinstall the system using the Toshiba recover disk or another Windows 7 disk (of course if you own one)
If the recovery would fail, you have to investigate what hardware part might be affected. I think in such case its needed to start with HDD check.
Possibly the HDD needs to be replaced. Of course it possible that Im wrong an other part is affected but at first stage you need to check new OS installation.
A recovery disk can be ordered here:
http://backupmedia.toshiba.eu/landing.aspx

Cannot load windows 7 through bootcamp

i have been trying to load windows 7 through bootcamp. but after the initial partition process, the screen goes blank with a cursor on the top left corner.
it does not come to life even after 4 hours.
i did not have any problem making the partition before. this is the first time i have had this issue.
can anybody help?????

I just successfully installed Windows 8.1 Update 1 on BootCamp on Mac OS X Yosemite. Here is a step by step I just wrote, hope it helps y'all:
How to successfully install Windows 8, or above, on Mac OS X Mavericks or above:
Requirements:
1- Windows OS ISO Image file
2- An 8GBs USB Flash Drive
3- A good Internet connection as you will need to download the Windows compatible drivers for your Mac
Steps:
1- Open up Disk Utility and create an additional partition for Windows formatted as ExFat. 100GBs, or above, is recommended as update to the operating system, as well as Apps requiere space on your HD or SSD [This step can be done during Mac OS X's installation process]
2- Open up BootCamp Assistant
3- Make sure only the 'Create a Windows 7 or later version install disk' is checked and your USB Flash Drive plugged in and click 'Continue'
4- Click 'Choose' and select your Windows ISO Image file
5- Select the USB Flash Drive you will be using during the installation process and click continue to confirm
6- Once done, restart your Mac and hold down the 'alt/option' key on your keyboard to bring up the Boot Menu
7- Select the USB Flash Drive named Windows, not the UEFI Boot
8- Install Windows as you normally would
* Remember to press and hold the 'alt/option' key, and select the Windows Partition, whenever the installation process requires your Mac to restart
* http://msdn.microsoft.com/en-us/library/windows/apps/jj945423.aspx
* http://windows.microsoft.com/en-us/windows-8/install-windows-on-mac

Cannot load Windows 7 - keeps freezing

Hi Everyone. This is a biggy. I have a Toshiba AMD Vision Satellite C660 / C660D laptop with no Windows installation disc. Last week it became very sluggish, then the interface resembled that of the ‘safe mode’ interface and it finally became completely unresponsive, therefore, via F8 on start- up I selected the option which allowed for it to revert to factory settings (I no longer have this option)
The DOS screen appeared and started loading as normal then that become unresponsive so I restarted only to see Windows start up for the ‘first time’ and carry on loading, prior to this I had to create a boot cd from my other laptop to reboot the system as I had lost the ‘boot mngr’.
The last part of the installation process began whereby a white Toshiba screen is displayed with a green progress bar that loads certain drivers (see attachment). There are 39 steps to this process and I seem to remember from before that the computer should keep restarting itself, but it keeps freezing after about two steps. I kept switching it off and eventually the ‘system administrator’ locked my accounts.
Once again I restarted the PC but this time in ‘safe mode’ The operating system did indeed load in safe mode and I created some new accounts with administrator privileges, however, I am still unable to load the whole operating system as it keeps freezing during the last part of the process.
I have very limited knowledge of loading operating systems so any help would be greatly appreciated.
Attachments:
crashed.gif ‏28 KB

Try holding '0' (zero) as you start the laptop to load the recovery utility and run it again.
- Peter

Resource Conflict – Serial Bus Controller & PCI Bus Issues - Cannot Load Windows 7 - PLEASE HELP!

Anyone have any ideas about a remedy? I am ready to toss it and purchase another. THANKS! HP Pavilion Notebook, dv9827clAMD Turion 64 x 2, Bios F.34Windows 7, SP 1 (Upgraded from OEM Vista SP2) PROBLEM: This morning my system has a blank illuminated screen. Upon power-on, the system eventually goes to the blank screen. Can get to BIOS functions, but beyond that it will not load Windows 7. System was working with Windows 7 prior to this issue. No recent changes or updates made to this system. Stationary - No physical abuse. Five (5) years old. Upon power-on, the screen gives PF keys, which enable me to enter the BIOS: F1 – System Information > Clock still has correct date and time. F2 – Startup Check -> Both HD and RAM OK F9 – Change Boot Device Order -> Can change device order, but it still won’t boot or respond to a System Recovery DVD in a USB DVD. ( Notebook DVD stopped working before this problem happened.) F10 - Enter Setup F11 – System Recovery – Two choices, but <enter> and arrow keys do not work. (They DO work with other F-selections, but not with F-11 menu) (1) Continue with System Resume (2) Delete Restoration Data and Proceed to System Boot OTHER OBSERVATION: When access PF1, I get the BIOS. If I exit and save with PF10, I get a brief flash of error messages, then it goes back to the PF-selections and eventually to the blank screen. Here are the error messages:Bios Version F.34ERRORResource Conflict – Serial Bus Controller on MotherboardBus 02 Device 05 Function 00ERRORResource Conflict – PCI on MotherboardBus 02 Device 05 Function 01ERRORResource Conflict – PCI on MotherboardBus 02 Device 05 Function 02ERRORResource Conflict – PCI on MotherboardBus 02 Device 05 Function 03ERRORResource Conflict – PCI on MotherboardBus 02 Device 05 Function 04 OTHER ACTION: Tried a hard reset = Removed battery, held down power key about a minute, but no effect. The data part of the HD is ok. I can remove the hard drive and put it in an enclosure, then access the data with another computer.

Hi!
I have exactly the same problem on my HP dv6750, but I can't find an answer that really help me to solve it.
Well, this post shows the description of my problem, so, I don't want this question dies.
If somebody have the solution, please, help me to bring my laptop back to life again.
Thanks

Cannot load windows 2000 (sp3) on pm8m2-v with single sata drive

I'm using a single WD 80GB SATA Drive (wd800jd) on the pm8m2-v mainboard's via sata controller. I've gone through the hit F6 and selected the windows 2000 ata/atapi driver and the raid driver (both separately) and the OS install always says it finds no hard drive. Then I tired both ata/atapi and raid driver for windows xp (even though i'm attempting a windows 2000 install) and it actually finds the drive, but after formatting and copying files, i get an inaccessible boot device failure when it reboots to begin setup. i've downloaded most recent mobo drivers and bios (the bios on the web is actually older than the one on the board? - web has v1.1 and the board has v2.0) ideas???

got it workin with the most recent xp driver from the site... strange

My MSI 880GMA-E45 won't load Windows 7 either?

I also cannot load Windows 7. Locks up at "Starting Windows" while installing from DVD or USB stick.
Page Fault in Nonpaged Area. STOP: 0x00000050 (0xFFFFF88000FF8000,0x sixteen zeros, etc.)
Tried stock settings, safe settings-no O/C, etc. This is with Win7x32 Prof., Enterprise or 64bit Prof. too.
Boots and runs off of Ultimate Boot CD & the Ubuntu live DVD, passes Memtest...
Funny thing is I was able to load Windows XP SP3 on it and it's idling with nothing installed at the moment.
Downloading the latest drivers for it now. Have the latest BIOS and turned most everything off except the HD and DVD drive & left everything on "AUTO." *Using the onboard video with either vga or dvi with same results.
I had it loaded last night with xpsp3 and the drivers from the CD the board came with. (No Win Updates. Maybe I need all of them including the .NET framwork stuff, etc.)
Couple times, I got a STOP: 0x000000EA, (0x88F9E888, etc.) ATI2DVAG Beginning dump of physical memory.
ATI Video driver...Real late last night, I got a STOP: 0x0000007E etc. pointing to msrpc.sys sound?
(It wants me to run XP or Ubuntu, that's kinda funny.... :azn: This mobo has something against Windows 7)
I'm going get a PCI Express Video card tomorrow, install it and see what happens.
If you figure out a setting I'm missing, please let me know. I'll check back later tonight and tomorrow at work.
Thanks in advance, Robert

Thanks Svet for the tip. One stick of ram booted and one did not. I can't believe I had not tried that yet!!! I have read that Windows 7 is picky about ram.
I had just purchased the mobo/chip combo, ram, hard drive & blu-ray/dvd from a Fry's B & M in town. It was raining here and the saved money was going to be spent! The price was right for the mobo combo.
I did not check the compatibility of the ram and the mobo which was a mistake.
After purchasing, I noticed on the ram package, that it says "for i5 & i7" and have also read about timing issues with AMD boards and some certain ram sticks.
Corsair's website has this ram listed as the value select line. Not processor specific but lifetime warranty. Maybe just a bum stick.
I'm bringing the ram back tonight. (Fifteen day return policy sticker on package.) Not sure if I should swap for another package or not. I'm checking to see what they have that could work better.
Thanks again, Robert
you da man.... dude

Loading Windows 7 x64 on H520s

Hi all,
I have an H520s, brand new. I am trying to load Windows 7 x64 on it. Upon booting from the DVD, I got an error; something about "Secure Boot" in Setup. So I went in there and disabled Secure Boot. Now, at least, the PC will boot from the DVD.
However, after the Windows boot DVD "loads files", it goes to the "Starting Windows" screen with the 4-colored flag and just sits there forever. No progress, and I can't do anything.
Help! Thanks!
Chris
Solved!
Go to Solution.

Hi,
Is "the exact same problem" the " cannot load windows on this disk" message?
IIRC you can select advanced options when you get to the disk selection screen. Delete all existing partitions and exit. The installer should continue with an MBR install from there.
If that doesn't work, use F10 to launch a command prompt and run DISKPART (see online diskpart documentation) and do a list disk, select, clean, and convert mbr. Exit and continue the install.
It's possible that you'll have to restart the installation.
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

K7N2-L cannot load MCP Networking drivers in Win98

My system is new and consists of:
K7N2-L mobo
AMD XP 2500 CPU
2 x 512 MB Twin Muskin DDR High Performance Black modules
All in Wonder ATI 7500
120 GB WD HD
I think that I have set up my Bios correctly and have installed Win 98 without any problem. All drivers loaded ok from the included CD, except for the nvidia nforce MCP Networking Adapter.
Everytime I reboot my OS recognizes that the onboard networking adapter is present, but I cannot load it.
I don't see that anyone has had this probem in this forum and wondered if perhaps it has anything to do with the MAC Address which is in the default (disabled) mode.
If I should have MAC Address enabled, how do I find out what Mac Address to use?
I would be very appreciative of any suggestions anyone would be kind enough to make.
TIA
John ?( ?( ?(

Jef, first thanks for the quick response.
Yes, I'm using win98, not SE, which I had read somewhere else (after I loaded it)would not work. Since all other drivers loaded properly I was hoping I would be lucky and it would be ok, but I suspected it might be my problem. Thank you for verifying it.
Also, in MSI FAQ it mentioned MAC address was on the ACR slot, but I didn't see it. Your mirror suggestion was the trick, but I wonder why MSI puts it towards the case side so that it so damn hard to see?
If I read backwards correctly, my MAC address is 0010DCE2D88B on what looks like a bar code sticker. I remember somewhere reading that the MAC was a combination of 12 letters and numbers which would fit this number. Does this sound right to you? There is also another sticker, but the writing is so small, I cannot make out what's on it.
Since I'm this far along, and will need to purchase Win98 SE or XP, I will try putting in these numbers and see what happens and let you know (I'm not too hopeful though).
Again, I appreciate your help.
John
Quote
Originally posted by jefn
Hi John -
Point of clarification: you have installed Windows 98SE? The nForce chipset and drivers doesn\'t support the original Windows 98.
Yes, you need to have the MAC address enabled. The MAC address should be on a sticker on the motherboard. You\'ll likely need a small mirror to read it as it\'s probably located on the side of your last card slot.
Jef

When you load Windows via Boot Camp Assistant program and run Windows does not recognize the "usb" outlets cannot identify the device through the Dvd or flash

When you load Windows via Boot Camp Assistant program and run Windows does not recognize the "usb" outlets cannot identify the device through the Dvd or flash

Did you install BC drivers on the Windows side?

I lost my drivers CD Webcam NX Ultra...

I lost my drivers CD Webcam NX Ultra and cant find in creative site. Only an upgrade, but I need the complete drivers...how can I have it's and the bundled software?
Thanks in advance

Hi and welcome to Discussions,
Apple provides the BootCamp Driver on the Mac OSX install DVD that came with your Mac.
After the installation of Windows insert that DVD while in WIndows and the Driver Setup should start automatically.
If you don't have the OSX DVD anymore you can call Apple and ask for a replacement.
Or you can go into the nearest store and buy a Mac OSX Snow Leopard install DVD for about 30 USD.
XP is supported with BootCamp as long as it a XP SP2 or SP3 32-bit retail or SystemBuilder version and not manufacturer-branded.
http://support.apple.com/kb/HT1899
Regards
Stefan

Using Firefox to access facebook chat Button or online friiend chat button generates a Black screen with CANNOT LOAD IMAGES and no chat window opens.

This does not happen in other browsers and it happens on a variety of computers I have access to and would seem to be a common problem but I can find no identical cases in my searches of
Firefox , Facebook or windows help or Google search. My home machine is only a P2 with WINXPCORP but works fine and I have done all updates but still have this continuing problem every time I try to use Firefox
to access Facebook chat but it does not happen with IE or chrome
The response to clicking on chat button or friend chat is a black screen with small center square box with blue title bar that says
'' VIEW IMAGE FULL SCREEN - (42) FACEBOOK X""
center of box is ""! "" mark in yellow triangle and wording
"" CANNOT LOAD IMAGES ''' OK
clicking on OK returns to facebook page but no chat opens.
Some times |VERY RARLEY if as the page loades you click on
chat button with 1/2 second of it appearing chat will open.

Hi,
Please also see [https://support.mozilla.org/en-US/kb/Problems%20using%20Facebook%20in%20Firefox this.]

Windows cannot load the user's profile but has logged you on with the default profile for the system.

My Windows 7 crashed a couple days ago after a windows update, I got this message.
Windows cannot find the local profile and is logging you on with a temporary profile. Changes you make to this profile will be lost when you log off.
I restarted the machine and got this message
Windows was unable to load the registry. This problem is often caused by insufficient memory or insufficient security rights.
DETAIL - The process cannot access the file because it is being used by another process. for C:\Users\TEMP\ntuser.dat
I checked the event Log I found these .
Windows cannot load the user's profile but has logged you on with the default profile for the system.
DETAIL - Only part of a ReadProcessMemory or WriteProcessMemory request was completed.
Windows has backed up this user profile. Windows will automatically try to use the backup profile the next time this user logs on.
Windows cannot load the locally stored profile. Possible causes of this error include insufficient security rights or a corrupt local profile.
DETAIL - The process cannot access the file because it is being used by another process.
This is the first error in the event viewer after a successful logon
The description for Event ID 34 from source ccSvcHst cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
ccSetMgr
Windows cannot load the user's profile but has logged you on with the default profile for the system.
DETAIL - Access is denied.
Looking at the Logs all I can tell is that after the Desktop Window Manager started if caused this error.
The winlogon notification subscriber <SessionEnv> was unavailable to handle a notification event.
then this one
The Desktop Window Manager has exited with code (0x40010004)
Then this before it shutdown.
The User Profile Service has stopped.
I started up the PC and the first message I got was
How can I get access to my user profile? do I need to createa new Administrator account? Please help
The EventSystem sub system is suppressing duplicate event log entries for a duration of 86400 seconds. The suppression timeout can be controlled by a REG_DWORD value named SuppressDuplicateDuration under the following registry key: HKLM\Software\Microsoft\EventSystem\EventLog.

hi do the following
1. In Search programs and files (Windows 7) area, type in regedit, and press Enter.
2. If prompted click yes,
3. expand the following HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList
4. click the sid that related to your admin profile (if you not sure, click each sid and in turn look to the right hand side of registry editor it will show who that sid is related to one of the registry files should hae in description localhost\admin or
something similair)
5. right click the sid and press delete.
6. restart your machine and log back on with the admin account, this will then rebuild the admin profile... dont worry when it loads and none of your personal settings are saved or files or folders... go to c:\users
in here you will see two folders for the admin account, one will be just admin and the other most likely admin.localhost
i cant remember which one is which but just check both, one will still have all your files and folders in it.
i suggest making a backup of your data before doing this incase something does go wrong, but ive had this happen many times in a domain enviorment and has worked for me everytime.

Webcam NX Ultra cannot load windows 7 drivers

Similar Messages

Maybe you are looking for