Webcam NX ultra Image always visible???

Can someone help me?
Is it possible to have the webcam image stay visible"on top" of any application that I call up?
How do I do it thanks so much for any help.

I had the same problem with the Webcam Live! Ultra. Having tried everything creative suggested and uninstalling, reinstalling latest drivers and software for everything I own I even tried a fresh install of Windows XP Professional..but all I got was the same black screen.
So, I went into my BIOS and disabled my USB 2.0 Controller thus leaving only my USB . Controller enabled. Now I get an image perfectly fine! Shame I have to run my USB at slower speeds, but at least everything works. Maybe a future Creative Webcam driver or VIA USB driver will fix the problem, or maybe I will just have to wait until I upgrade my motherboard to have full USB 2.0 support.
Anyway, I hope this helps!
DAN

Similar Messages

  • Line Chart: Make Data Tip Images Always Visible

    What I want to do is simple. I have a line chart, on the
    lines I want
    the little image that denotes a data point to always be
    visible. I don't
    want the datatip to be always visible, just the little image
    that you mouseover
    to show the tip. Surely I'm missing something...this
    shouldn't be this hard to
    figure out. Thanks in advance.

    "crl-alt-del" <[email protected]> wrote in
    message
    news:ghu2b1$t4f$[email protected]..
    > What I want to do is simple. I have a line chart, on the
    lines I want
    > the little image that denotes a data point to always be
    visible. I don't
    > want the datatip to be always visible, just the little
    image that you
    > mouseover
    > to show the tip. Surely I'm missing something...this
    shouldn't be this
    > hard to
    > figure out. Thanks in advance.
    http://flexdiary.blogspot.com/2008/08/charting-example.html

  • Webcam NX Ultra cannot load windows 7 drivers

    Hi please help - I was so excited to see the windows 7 drivers for my webcam NX ultra - but I cannot load them . Installation wizard gets to a certain point and then it says driver installation failed. I have tried unistalling the camera, unistalling anything with creative in the title in my registry - always same result installation fails - PLEASE HELP - if I cannot get this to work I will bever buy another creative product - my logitech camera which is 5 years older has windows 7 drivers and works fine. Com-on creative get with it

    Here
    http://support.creative.com/Products/ProductDetails.aspx?catID=218&CatName=Web+Cameras& subCatID=219&...
    but I see now it was not for windows 7 - it comes up when you do search and windows 7 guides you to the page...
    Looks like I will just buy logitech products in the furure :-(

  • Problems with microphone (incl. w/ WebCam NX Ultra)

    This is about the only section that would be related, so I have my WebCam NX Ultra working perfectly, for the headphones/microphone that came with it, the sound works fine, but the microphone doesn't work. Apparently I have the proper drivers (which would be Generic) for the sound, but the microphone doesn't work, so I'm guessing I need a certain driver for it or something...help me out. How do I get my microphone to work?
    Dan Eagles
    NB, Canada

    I have had a Creative Pro Web Cam for a year and a half and in that time my family has not once been able to hear me. I could always hear them, but now can't seem to hear them either. They are losing patience. I have checked all the usual things like volume and the microphone not being in mute, etc. I have gone into the Center and the audio is enabled. What am I supposed to have for Audio Compressor and Audio Format or am I supposed to have anything. Also, should my volume setting be for playback or recording. I have tried it in both. Everything is plugged in correctly. I would just like to throw it in the garbage I am so annoyed. Downloaded Yahoo but it does not work on yahoo either. Please someone; why can they never hear me and why can't I hear them suddenly. I have tested the microphone incidentally and it works just fine. Woody

  • Layer Position - Images always on top

    I've been working on a large project for a month or so now and all of a sudden, when I import a new image it is always displayed over the top of other images, even when it should be behind them.
    I can correct this by moving the image in question lower down in the layers pannel, however I have loads more images in there which by that logic, should be visible over other objects, but they're not. This problem only started a few days ago.
    I'm guessing I've accidentally enabled an option somewhere without realising it?

    Assuming your groups are 2D groups then importing an object /image always comes in as the top layer in the  group or selected group if you have more than one. That means it displays above other layers below it. What you are seeing is normal behavior. Works this way when you use the apply button. If you drag and drop from library you can place it where you want in the layer list. No preference settings for this.

  • My Built-in Webcam has my image in a horizontal split screen!

    My Built-in Webcam has my image in a horizontal split screen. How can I fix this???

    Let me explain more - when I use skype for example, my image is displayed in a horizontal split screen. I have tried another chat product and the same thing happens - so it must be something to do with the built in camera or configuration of the camera. Would it be best to contact Apple about this? Will somebody have to get a spanner out to fix my quite new macbook pro? (3 months old). I teach languages online so I really depend on a decent image. Can anybody help me?

  • How to get my images always order by file name, and not by time of captur, in all the folders in the library?

    How to get my images always order by arquive name, and not by time of captur, in all the folders in the library?
    Sorry for the poor english, but im portugues.
    In the library we can change the order of classification of image by, time of capture, name of file etc... I'm wondering if its possible define to be always by the name of file.
    It ´s possible?
    And i have other question, in print label we have an option to auto rotate to feet in page to have the image using the maximum area in the page (auto rotate, zoom etc), its possible to change the orientation of the rotation to be always in  the other direction?

    The Muvos are USB Mass Storage devices and do not have the ability to display track information based upon ID3 tags.
    The Zens all read and display track info based upon ID3 tag information that is either gathered from an online source or entered by the end-user.
    If you want the track information displayed instead of the ID3 tag information, you could edit the ID3 tags and rename the title to whatever you have as the file name. Not sure why your file names would differ so much from the ID3 tag info though, almost all of my content has the same name for the filename as it does on the ID3 tag title.

  • How to make the exe always visible in the illust application.

    Hi,
    I created an interface for "illustrator CS" using Visual Basic and copied that exe in Scripts folder. I want to know how to make the exe always visible in the application(Not in Taskbar), once it was clicked. Could you please kindly help me to solve this.
    Regards,
    Prabudass

    Hi,
    I guess....though i am not pretty sure....but the Preview tab has been discontinued in the newer versions....
    Only the Gods can give a perfect solution though...!!
    <i>Do reward each useful answer..!</i>
    Thanks,
    Tatvagna.

  • How to make the exe always visible in the application window

    Hi,
    I created an interface for "illustrator CS" using Visual Basic and copied that exe in Scripts folder. I want to know how to make the exe always visible in the application window itself(Not in Taskbar), once it was clicked. Could you please, kindly advice me.
    Thanks,
    Prabudass

    Hi,
    I guess....though i am not pretty sure....but the Preview tab has been discontinued in the newer versions....
    Only the Gods can give a perfect solution though...!!
    <i>Do reward each useful answer..!</i>
    Thanks,
    Tatvagna.

  • Background Image not visible in a PDF report

    Hi Experts!
    I create a WORD 2007 template for BI Publisher 11g. I use a background image.
    When I test the template locally as a PDF, the background image is visible, but when I open the Report with the BI Publisher, there is no image.
    Has anyone an idea?
    Regards Norbert

    The size of the images was too big after compressing it. It worked fine.

  • How can I make the status bar always visible in safari?

    How can I make the status bar always visible in safari? Even when I go to "View" and then select "show status bar," the status bar still disappears unless my cursor is hovering over it. I want to be able to see the time, battery life etc. while surfing the web in safari!

    When Safari is in FullScreen mode, menu bar will be hidden.
    Safari window to fit the screen?
    Move the mouse pointer to the bottom right corner of the Safari window.
    Double arrows will appear. Drag it to resize the window to fit the screen.

  • Fill Image not visible with iOS (ipad/iphone)

    Hi
    I created a website with Adobe Muse and I have an issue when surfing with ipad or iphone.
    When you have a coloured rectangle and add a fill image to it, it's perfectly visible with any type of browser on a desktop pc.
    Yet, when using iOS7 the image is not shown, I only see the coloured rectangle.
    This issue only concurs when I use parallax layers. The moment I add a movement to the image, it's not visible on ipad.
    What I exactly do:
    image fill: adapt to fill (in dutch: aanpassen aan vulling) and centered
    movement: start movement up and right both on 0. after movement: up and right both on 0. This way I can create a parallax effect.
    You can look at the example: http://balratmort.businesscatalyst.com
    There are 4 image's not shown.
    Strange thing: the first image with the brazilian flag has the same settings as the others, and the image is visible!
    Could someone please help me in this?

    I found the solution/error!
    my main position in the movement tab was set to 0px.
    So the movement starts when i'm at the top of the page.
    when i reach the image it's already scrolled out of focus.
    I need to set this to the pixel where my rectangle starts, not 0px.
    and that's why the first image with the brazil flag, worked correctly!
    I hope it's clear, since my muse is dutch, not english.

  • Buritto/Hero 4.5 (MobileApplication) Scrollbar always visible?

    I've tried for 3 to 4 days now...
    To make a scrollers scrollbar always visible.
    It seems to me extremely counterintuitive to make a scollbar not visible within a scroller that has (for example) a textarea in it.
    You can't see that the text goes beyond the viewport and should be scrolled. Usually a scrolls purpose is to help identify there is more to scroll to.
    Enough said there, making the scrollbar invisible or fade away is really bad (DESIGN Flaw).
    Trying to make it appear initially is ultimately currently impossible from what I can tell (BUG & DESIGN flaw).
    Don't recommend turning visiblity or alpha on. That was the first minute of four days no success.
    ScrollerPolicy is only about should it appear when the content is larger and that is also not the issue.
    You see for some backwards thinking reason the scroller only appears when your actually scrolling and then fades away when done.
    I did override to disable fade out potentially (not perfect example for animated sliding action).
    Well first I replaced the skin with something people can actually see too instead of the thin line of black on black. (using a spark skin not the default)
                import spark.skins.spark.VScrollBarSkin;
                public function init():void {
                    xtc.getTextFor(title, contentTextArea);
                    contentScroller.verticalScrollBar.setStyle("skinClass", Class(VScrollBarSkin));
                    contentScroller.verticalScrollBar.addEventListener(MouseEvent.MOUSE_UP, bringMeBackPlease);
                public function bringMeBackPlease(e:MouseEvent):void {
                    trace("bringMeBackPlease: " + e.type);
                    trace("MOUSE: " + e.localX + " " + e.localY);
                    var ai:AnimateInstance = contentScroller.verticalScrollBar.activeEffects[0];
                    if(ai != null) {
                        if(ai.animation != null) {
                            ai.animation.stop();
                            ai.animation = null;
                            contentScroller.verticalScrollBar.removeEventListener(MouseEvent.MOUSE_UP, bringMeBackPlease);
    Okay well that reminds me I totally replaced the skin with a Catylist built one two but this animated fade functionality resides clearly in the Scroller class I think.
    You'd possible be able to replace the Scroller class via Catylist but it only has a few simple objects to play with No textarea, no Scroller, etc.
    I couldm't find a different none mobile spark scroller that isn't disfunctional in this way (fadeing scrollbars).
    I even delved into using Effects to Fade it back
                //private var restoreSliderFade:Fade = new Fade();
    skipping code it did fade the dcroller to view but I could not also make the scrollbar fade back.
    I tried simulating drag operations, mousedown, move events etc. nohting can actually get the f!ng scrollbar to appear that I can find.
    It's rare I result to forums so I'm hopeful people at Adobe in development see this stuff and actually realize the need a boolean on the MobileApplication Scroller Class that is something like autohideScrollbars with a default of false.
    Please help ASAP anyone any work around??!!!
    At this point I'm forced to try and make the scroller cut a line of text in half so the user thinks Oh I should scroll now... but where's the scrollbar?!
    I've dynamically loaded the textarea in init and that resizes the thing.
    I've added manually draging of the textarea (also seems wrong and should work by default)
                private function draggingContent(me:MouseEvent):void {
                    trace("draggingContent" + me.toString());
                    switch(me.type) {
                        case MouseEvent.MOUSE_DOWN:
                            dragging = true;
                            dragOrigin = contentScroller.contentMouseY;
                            scrollStart = contentScroller.verticalScrollBar.value;
                            break;
                        case MouseEvent.MOUSE_MOVE:
                            if(dragging == true) {
                                contentScroller.verticalScrollBar.value = (scrollStart + (dragOrigin - contentScroller.contentMouseY));
                            break;
                        case MouseEvent.MOUSE_UP:
                        case MouseEvent.MOUSE_OUT:
                            contentScroller.setFocus();
                            dragging = false;
                            break;
                        default:
                            break;
    with listeners in initi()
                    contentTextArea.addEventListener(MouseEvent.MOUSE_DOWN, draggingContent);
                    contentTextArea.addEventListener(MouseEvent.MOUSE_MOVE, draggingContent);
                    contentTextArea.addEventListener(MouseEvent.MOUSE_UP, draggingContent);
                    contentTextArea.addEventListener(MouseEvent.MOUSE_OUT, draggingContent);
                    contentScroller.setFocus();
    I could go on with all the ways I looked at ever class property and function, delved through the debug viewer inspecting values before and during states of visibility.
    Is there a way to access all the automation and disable certain ones like fading with my hack breaking other more useful smoothings, or override the ones I loath?!!
       Your angry MobileApplication Burrito Beta Testing Victim

    I'm sorry to hear you've been having problems with this, but thank you for providing this feedback on here.  It's really helpful for us to hear experiences like this so we can work to make things easier.
    1. "making the scrollbar invisible or fade away is really bad (DESIGN Flaw)."
    Native iOS and Android applications also fade away their scrollbars the same way, but they do initially show the scrollbar for a short time when the view is first loaded before fading them away.
    Here's an enhancement request for allowing scrollbars to always be visible: http://bugs.adobe.com/jira/browse/SDK-29296
    2. "Trying to make it appear initially is ultimately currently impossible from what I can tell (BUG & DESIGN flaw)."
    This is something we thought about doing, but didn't have the time to implement in this release.  See attached ZIP for an example of how you might do this.
    There is an enhancement filed here: http://bugs.adobe.com/jira/browse/SDK-29299
    3. "ScrollerPolicy is only about should it appear when the content is larger and that is also not the issue."
    When you're using a mobile Scroller the horizontalScrollPolicy/verticalScrollPolicy govern whether scrolling is allowed in that direction.  It doesn't have any further connection with the visibility of scroll bars like it does in a desktop Scroller.
    4. "Well first I replaced the skin with something people can actually see too instead of the thin line of black on black. (using a spark skin not the default)"
    The skin for the scrollbars has been updated since the preview release and will stand out more in the final release.
    5. "I couldm't find a different none mobile spark scroller that isn't disfunctional in this way (fadeing scrollbars)."
    On a desktop application you can hook up your own HScrollBar/VScrollBar directly to have more control over things like this, but in a mobile application only Scroller currently is able to handle touch-based scrolling.
    It might make sense to enable touch scrolling without needing a Scroller.  Here's the enhancement request for this: http://bugs.adobe.com/jira/browse/SDK-29300
    7. "I tried simulating drag operations, mousedown, move events etc. nohting can actually get the f!ng scrollbar to appear that I can find."
    Interesting idea, but faking a touch scroll is quite tricky and won't really get the results you are looking for in the final release so I would recommend not going further down this approach.
    8. "It's rare I result to forums so I'm hopeful people at Adobe in development see this stuff and actually realize the need a boolean on the MobileApplication Scroller Class that is something like autohideScrollbars with a default of false."
    This relates to the first two bugs listed above.
    9. "Please help ASAP anyone any work around??!!!"
    See the attached ZIP for an example application that demonstrates how to keep the scrollbars always visible, as well as a sample way of implementing the initial show and fade functionality.
    It was a bit tricky to figure this out because both Scroller and ScrollerLayout affect the visibility of the scrollbars and change includeInLayout/scaleX/scaleY when things are not visible.
    10. "Your angry MobileApplication Burrito Beta Testing Victim"
    Again, thank you for your detailed feedback.  I know working with preview releases can be very frustrating at times, but hopefully the information in this post helps ease the pain a little.
    Please feel free to vote and comment on any/all of the bugs listed above.
    Thanks,
    Steve

  • Table header always visible

    Hi All,
    I have used table in scroll container.when i scroll a vertical scrollbar,table heading are also scrolled.
    Is it possible that the table header is  visible, when i scroll to vertical scroll  in the table?
    Thanks
    Abhilasha.

    Hi,
    Have a workaround to use two tables, one table containing columns as header and set some of the properties of the that table like footer visible = false,row selectable = false etc., and the other table holding the actual data. This is proposed by Armin in the following thread. Hope your requirement will be fullfilled.
    [Re: scroll container UI element]
    and some other related threads
    [Re: Table header always visible]
    [Table header fixed]
    Regards
    Raghu

  • Cannot deselect images ,always selects 2 images so settings are always on sync. tried control D

    cannot deselect images, always selects 2 images from the folder i am in, so sync setting are always on. tried control D but then automatically selects 2 Images

    This has happened to me too.  I had to quit the lightroom application and restart it to fix this problem.

Maybe you are looking for