Webcam ok with skype but not youtube record

i am attempting to record a youtube training video. my webcam is on-board and my koss SB45 headset with boom mic is to be used. I use this configuration when video skyping without a htch. But under no circumstances can i go to youtube, sign in, Upload then Webcam Capture-Record. the cam will not turn on. the little window that pops says "Enable hardware accelleration" and nothing more. there are only 3 tabs at the bottom, a monitor (no eye), a mic and a cam. that's it. i've uninstalled and reinstall flashplayer plugin and webcamCentral.2.0. still no change. Where is the switch?

Check with the folks at Skype.

Similar Messages

Airport Express works with Skype but not with internet

Hi,
I recently bought some new Airport Express' for my company. However, when plugging it in we seemingly get full access, but only Skype seems to work. If I do a search on the internet it can sometimes look like it find the address after a long while, but don't manage to open the page. E.g. writing www.google.com in the search field doesn't give access to that page.
I brought them home to check if the Airports worked there, and they did. No problem. But at the office the Airports don't. If I connect the same plug which is connected to the Airport into the MAC / PC, then I have full connection to the internet.
What to do?

After Grant pointed out the DNS thing, I started to check that part, and I noticed something funny. I called Apple Support regarding the problem, and now it's solved
Here is my experience:
1. My Airports worked fine when home, but not at work.
2. Checking the LAN DNS addresses I received three addresses. 2 in the 158.xx... range and one in the 129.xxx... range.
3. The Airport Extreme and Airport Express does only support two DNS addresses, and since the two 158.xx... DNS addresses came first in that range the 129.xxx... was left out.
4. I manually changed one of the 158.xx... addresses to the 129.xxx... address I got on my MAC / PC when I connected directly to the wall and did a "ipconfig /all" on the PC. The three same addresses is listed under network - airport on the MAC.
5. Now suddenly it all worked. This due to that the two 158.xx... addresses seamed to be internal addresses, and the 129.xxx... address was from outside delivered from our operator.
Summarized:
When you receive 3 DNS addresses you MAC and PC can handle it fine, but your Airport not. Find all your DNS addresses and write them down. Enter Airport Admin Utility and do a manual setup. Change one of the two equal address to the third address. Most probably listed as the last DNS address when you are connected directly and type e.g. "ipconfig /all" on your PC or you enter the network settings.
Best regards,
Bouw

Using web cam with skype but not receiving image from PC

I've just downloaded skype and asked my son to do the same as we got nowhere with messenger, in the hope to be able to chat to him and see each other. He can see me but I cannot see him and his webcam says "error in trying to connect to ...'. Is this something to do with his webcam or the fact that I am using a Mac?

Check with the folks at Skype.

ISight Camera working with Skype but not iChat/Photobooth

Hi there,
may you can help?!
My external FW-iSight is working on Skype and facetime - not on iChat or Photobooth.
When I disconnect my new Apogee Ensemble the iSight is working.
Isn't it possible to use more than one FireWire-port???
Power-problem?
How can I fix it without buying a new CinemaDisplay?
Thanks for help
nils

nils wrote:
Hi there,
may you can help?!
My external FW-iSight is working on Skype and facetime - not on iChat or Photobooth.
When I disconnect my new Apogee Ensemble the iSight is working.
Isn't it possible to use more than one FireWire-port???
Power-problem?
How can I fix it without buying a new CinemaDisplay?
Thanks for help
nils
Welcome to Discussions, nils
(1) External iSight can be difficult to use with other Firewire devices or certain AV software.
More info: http://www.ralphjohns.co.uk/EZJim/EZJimpage6.html
If you must use iSight with the hardware or software that is causing your conflict, perhaps adding a separate Firewire card for your external iSight will help you.
(2) Searching Discussions shows that other users have also encountered problems with Apogee Ensemble:
http://discussions.apple.com/thread.jspa?messageID=9877690
http://discussions.apple.com/thread.jspa?threadID=605949
My web search for "Apogee Ensemble known issues Mac OS X" returned several other items.
Although none of the posts that I saw specifically addressed your external iSight issue, something in one of them may give you ideas if your problem is not otherwise resolved.
(3) If you have not already done so, check Apogee's Ensemble FAQs for relevant info:
http://tinyurl.com/2aetb5s
For instance, if you have updated Ensemble's Firmware, the first FAQ might be of interest.
(4) If all else fails, consider email support directly from Apogee:
http://support.apogeedigital.com/index.php?option=com_forme&Itemid=186
Mac Pro Quad Core (Early 2009) 2.93Ghz Mac OS X (10.6.5); MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.5)
LED Cinema Display; G4 PowerBook 1.67GHz (10.4.11); iBookSE 366MHz (10.3.9); External iSight; iPod4touch4.2.1

My camera works with the photobooth and with skype but does not work with online applications such as "lolcam from facebook" or "faceonthehole" application. Please help

My camera works with the photobooth and with skype but does not work with other applications like the "lolcam" from facebook or the " faceonthe hole" application. Can anyone help?

There was a issue with school computers being used to spy on kids in their bedrooms, Mac's were involved.
So Apple most likely tightened the API's to only select, trustworthy companies as not to abuse the web cam access priviledge.
If you want to use a web cam with these other programs and services, you'll likely have to buy a third party USB one, so you can manually disconnect it.
There isn't a way to physcially disconnect the built in web cam on Mac's without busting open the machine.

I get sound from Youtube with Safari but not with Firefox

I get sound when using my MacPro with Safari but not with Firefox.

Did you check the volume setting in the player to make sure that the sound isn't muted?
You can try to clear the Flash local storage.
Flash Website Storage Settings panel:
*http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager07.html
Flash Local storage settings Help:
* http://www.macromedia.com/support/documentation/en/flashplayer/help/help02.html

Can connect to skype but not internet, running snow leopard

Moved to new house; was able to connect to internet with firefox first day; after that can get on Skype but not internet. Is it my computer or the wireless router in the house? what should I do?

This is all I could find on the topic, but it doesn't resolve my issue:
http://docs.info.apple.com/article.html?artnum=106798
http://docs.info.apple.com/article.html?artnum=106797

Why does the FP 10 work with firefox but not with IE8

I down loaded the folowing for xp FP uninstall, FP plugin and FP debug from the link in one of your replys. now I can watch youtube with firefox but not with IE8. you asked me before if i was using 16 bit. whats that mean and how do I find out? please help I just want to watch youtube on IE!

Ok Shag, since you hadn't been on a Forum before, then I'll take some of what I said back:-) I wanted you to stay on one thread, you can get in trouble trying things that may cause you more problems than you had in the beginning. I just had your best interest at heart
I'll even overlook your all caps here:-) At least you responded
Now since you say you fixed it, what you should do is to confirm it is fixed by taking a look at your Flash folder. This contains all of the Flash files for IE and FF. Then make sure you have the IE add on and the FF add on. That way if you have any future problems, at least you would know it is not the Flash Player.
You should only have 2 .exe files for IE and 1 for FF.
For Video editing, I would check Microsoft and see what they have. Perhaps someone else will come along with other info for you.
No, I don't get paid here, since I am not an employee. Just a user helping others, since I had a problem at one time and after 4 hours of researching solved it.
Let me know if you want to check the Flash files.
Thanks,
eidnolb

I have a motorola s305 bluetooth that pairs with iphone but not iMac. any suggestions?

I have a motorola s305 that pairs with iphone but not imac. I want to use with Skype. Any suggestions?

Unpair it from the phone and try again.

Use Skype, but not torrents

Hi.
I am looking for a way to allow the users in my company to use skype, but not to be able to use torrents. We are using Skype to communicate, but the torrents are making a lot of traffic.
I was thinking to use Squid proxy. I can disallow the users to download *.torrent files, but I do not like that way of dealing with the problem. Do you have the same problem at your companies and how did you manage to solve it.
Regards.

There are two projects, l7-filter and ipp2p, which allow you to match p2p traffic and drop it using iptables. Both need kernel patching, though (edit: actually, ipp2p apparently doesn't).
Last edited by lucke (2008-09-29 11:03:09)

HP D110 AIO printer. Prints jam when printing with wireless, but not when hooked to USB cable! HELP!

I have a HP D110. It jams the paper when I print with wireless, but not when I use USB cable. Any ideas?

From what you describe you are having issues printing from MS Office. Have you had trouble printing from other resources on your computer (e.g. from the internet or another program)? The first thing I am going to suggest is that we start by uninstalling and reinstalling the printer from the resources available online.
First if you use a USB cord, make sure to remove it (this is important). Do not plug it back in until the software directs you to. Then go through the Devices and Printers, Programs and Features and Device Manager folders and insure that all copies, files, and programs related to the printer are removed. Then as directed, restart the computer.
In the START menu type "%temp%" and press ENTER. Here I want you to press Ctrl+A and hit DELETE. Some of the files will not allow you to delete them, skip those files and delete the majority that allows it.
http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=3562006&lang=en&cc=us...
Install that and let me know the result!
Have a great day!

Move graphics with text--but not inline--in PM...??

Hello, is there a way in PageMaker to move graphics with text but not inline? I ask because right now I see two options for graphics:
--inline, so you cannot place the graphic exactly where you want AND the text only flows way above or below--but not next to--the graphic
or
--independent so you can place the graphic exactly where you want and the text DOES flow right next to the graphic, but then the graphic doesn't move with the text
I'd like to be able to place graphics exactly where I want AND have them move with the text, like the "Move object with text" option in Word.
thank you!
L

well it has been a while since i used PageMaker so i didn't realize it was "dead."
though i'm not surprised and am kind of glad. i was hired into a new job recently
to work on a department newsletter, and i'm trying to find a good authoring program
within our budget. right now the newsletter is in Word but we've had a lot of problems
with Word so i'm seeking an alternate solution. i'd like Frame but again there isn't
enough money in the budget. i need a good option that is $500 or less...i'm trying Publisher
now too but not enough functionality...

IO assigned with Asset,but not coming at the time of PO creation

Hello
IO assigned with Asset,but not coming at the time of PO creation.
I have made following settings:
1     Depreciation - IFRS (INR)              1     0L
15     Income Tax Act                             0
20     Depreciation - Indian GAAP (INR)     3     1L
30     Depreciation - IFRS (USD)              0
31     Depreciation - Indian GAAP (USD)       0
In ACSET-Account assignment:
for dep area-20
CAUFN     Internal Order     *     Generic Trans. Type     02 Depreciation Run
KOSTL     Cost Center     *     Generic Trans. Type     02 Depreciation Run
so currently i am using only dep area-20 only(Indian GAAP)
CAPEX budgeting is through IO. AUC is not doing through IO,its directly from AIAB/AIBU
AS01
KO01
AS02
KO22
KO30
so what is the problem,why i am not getting IO (which is in display mode in PO) when assigned the Asset with category of "A" (asset) in PO.......when i assigned Asset- the GL account come automatically but IO didn't come.
kind regards

Hey Ajay
thanks for your reply.....
now i'm getting new error:
Parallel depreciation area 31 is not posted
     Message no. AA565
Diagnosis
     The asset to be posted does not manage parallel depreciation area 31, or
     transaction type that you are using is limited to certain depreciation
     areas, and does not contain depreciation area 31. This is incorrect.
System Response
     Posting is rejected.
Procedure
     Check the asset and the transaction type.
I have checked some configuration but not able to debug it.
regards

TA25361 I have a ton of documents and databases in AppleWorks v 6.0 that I can no longer open on my MacBook Pro. Is there any way to recover this info? Some documents can be opened and resaved with textedit, but not my database with all important addres

I have a ton of documents and databases in AppleWorks v 6.0 that I can no longer open on my MacBook Pro. Is there any way to recover this info? Some documents can be opened and resaved with textedit, but not my database with all important addresses.

I tried Peggy's List > Select All > Copy > Paste into an AW spreadsheet suggestion.
In my case, pasting into the spreadsheet lost all text formatting (mostly text set to bold). The results of formulas were pasted, and checkboxes were pasted as "on" or "off". The DB did not contain any pop-up menus or radio buttons, but I expect they would transfer as a number showing the list position of the chosen item.
Pasting the copied List view data into a Numbers table gave a result similar to that with AppleWorks. I selected B2 as the target cell (for top left cell of the pasted data) to avoid any effects of posting into a header row or column. Bold and regular text formatting looked the same as it had in AW's List view.
Based on that, I'd slip the 'paste into an AppleWorks Spreadsheet step, and paste directly into a Numbers Table.
Regards,
Barry

Tomcat gives 404 with Netscape, but not IE

Why would I get a 404 for an application with netscape but not with ie?
I am using Tomcat 5.5.
Is there something special that I need to do for each browser?
Thanks in advance
Burt

Why would I get a 404 for an application with netscape but not with ie?
I am using Tomcat 5.5.
Is there something special that I need to do for each browser?
Thanks in advance
Burt

Webcam ok with skype but not youtube record

Similar Messages

Maybe you are looking for