Webcam problems with wlm 8.5

Is there somebody who knowns a software that can be used between my Mac and messenger and where the webcam ISight is working with. For the moment I have a mercury the webcam function is not working. Find bellow the reason.
ok, webcam functions with wlm 8.5: before 8.5 wlm had a function that made a indirect connection possible, wlm 8.5 didn't have it.

Johannes de Vilder wrote:
Is there somebody who knowns a software that can be used between my Mac and messenger and where the webcam ISight is working with. For the moment I have a mercury the webcam function is not working. Find bellow the reason.
ok, webcam functions with wlm 8.5: before 8.5 wlm had a function that made a indirect connection possible, wlm 8.5 didn't have it.
If I understand correctly, Johannes, you can use either aMSN or Mercury
Either can do webcam video with MSMessenger clients using OS X and your built-in iSight.
aMSN and Mercury work a bit differently, so use whichever is easiest or most reliable on your MBP.
As an alternative, because your iNtel Mac can use Boot Camp, VMware Fusion™, Parallels™, or VirtualBox to run Windows® software, you can choose which method you want to use, add the required software to your iNtel Mac (if you have not already done so), and then install and use the same Windows® Messenger application that your contacts use.
If you need more help with Boot Camp than you get here, search or post in Boot Camp discussions category.
EZ Jim
Mac Pro Quad Core (Early 2009) 2.93Ghz w/Mac OS X (10.6.1) MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.1)
G5DP1.8GHz (10.5.8) G4 PowerBook 1.67GHz (10.4.11) iBookSE 366MHz (10.3.9) LED Cinema Display External iSight

Similar Messages

Webcam problems with ONE contact

Im not sure if this is this is the right place for this post but im running out of options and i am getting desperate!
Here is the situation:
I have a mac book pro laptop running os x 10.5.6.
I am trying to use my webcam and chat with a contact, the webcam is set up and works with all other contacts accept this one contact.
On My macbook pro - I have used IChat with AIM to try to video conference with the contact, and i get an error message, saying that the contact is in another conference (which they say they arent). On their side they say that the conference was declined from my side.
I Also experience a similar problem on my pc using msn messenger... I can view my contacts webcam, and all other contacts webcams, and I can send my webcam to all other contacts... but the one contact, the screen goes white, and the connection times out?
I am assuming this would be a problem with the one contacts router or firewall? but what could it be? they say the firewall is disabled ...
But if it were a connection problem would I be able to view the contacts webcam?

Hi,
This could be several issues.
If it is Mac to Mac then it is likely to be a feature of their Modem such as Denial of Service or Internet Ping blocking (not responding to Internet Pings).
If it is Mac to PC then the Windows firewall should be On but the app allowed as an Exception Written for XP Service Pack 2 but applies to Vista as well.
There is a chance that it is about whether they have opened the ports iChat (or their App) needs in their router or modem. Most only have port up to 1024 open.
the device(s) can act as a hardware firewall if they are not open.
Ports to cover iChat 3 and 4
AIM uses port 1024-5000 in addition to Logging on on port 5190
8:28 PM Thursday; January 15, 2009

Webcam problem with Thinkpad L530 running Windows 8

Hi,
I have a L530 running windows 8. I'm trying to activate the webcam with Skype. Skype doesn't recognize the webcam. I went into the Start "page" in windows 8 and use the "Camera" win 8 app. The app displays a big camera with a diagonal line going across it, which to me meaning that the Camera app has problem using the camera.
I've gone into the controll panel/Device manager checking for Integrated Camera. The device status says "This device is working properly". The driver version is 1.0.0.19.
I'm not sure what to do. Any help is greatly appreciated. thanks.

Hi, whto
This sounds like the camera is set to Private mode, which is a security feature to block the camera from any potential hackers. To change this setting, go to the Lenovo Settings metro app and open it. There should be camera settings in here. Select the camera and make sure the camera is not set to Private.
Hope it helps,
Adam
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

Webcam problem with flash player

Hi,
I am using flash v10.3.181.26 on a win7 machine with IE9, and trying to make it work with a virtual webcam (a directshow filter in the video capture category). I notice that the available formats are enumerated (I420 352x288 , RGB32 352x288 ) by flash player by making calls to the getstreamcaps function. Then it tries to make a connection using RGB32 320x240 by making a call to setformat. The structure it passes to that function has an inconsistent field (bytesize). I checked this by calculation, as well as trying other apps. Can you please verify this..? I can provide more details if required.
PS.: Apologies In case this is not the correct forum to discuss this, please let me know
Thanks

In the GetStreamCaps function in my code, for the RGB32 format I had provided it the values filled in based on the default (RGB32 352x288). So, in the AM_MEDIA_TYPE structure, lSampleSize is 405504, and in BITMAPINFOHEADER, the biSizeImage is also the same. I also provided the min resolution as 320x240 and max as 352x288, with a granularity of 16x16.
so, it decides to take 320x240 as the resolution and calls my code with SetFormat. In there, I noticed that the BITMAPINFOHEADER's biSizeImage filled is as expected (320*240*32/8), but the lSampleSize of the AM_MEDIA_TYPE is still the same as before (405504). If I store this format now and later give it back in GetFormat, then the flashplayer seems to get messed up (enumerating the media types again, and then calling checkfmediatype with null, and then finally failing in the buffer allocation step while trying to connect). The failure in the buffer allocation pointed me to some possible problem in the bytecount.
If I correct the structure passed to me in the Setformat (i.e. I make both values as expected), then things go fine, the media type in checkmediatype is the same RGB32 320x240, and the buffer allocation succeeds, and the connection succeeds)...

Webcam problems with windows 7 profesional (64bits) RTM

hello the reason why I write this post is because last week my laptop model pavilium dv3-2155mx I put the windows 7 Professional (64 bit) RTM, everything is going well but the only problem is I can not use the webcam , windows 7 is the default options when download the drivers and see if the driver of the webcam is installed appears to me as if I were in the device manager under 'imaging devices'. The problem occurs when I open the "HP MediaSmart Webcam", to open that program should be off the camera from my laptop and see the image that is generating the webcam but the following appears:
"MediaSmart Webcam can not make the connection to the video device (HP Webcam). Select another capture device in the closed configuration options or applications that may be using this video device and restart SmartWebcam"
I do what that tells me there but nothing ... again receive the same message also tested with the "Cyberlink YouCam" and leaves the same, the same happens when I try to put it on Messenger, getting an error that can not start the webcam ... I would like to know what is happening and give me a solution for this problem because the windows 7 looks great and I do not want to go back to Windows Vista because Windows 7 is much faster and much better job with this, want a solution please to use my webcam in windows 7 I hope your answers thank you very much!!

oops sorry, my mistake, well the exception says "System.NullReferenceException"
the code:
string oradb = "user id=" + login + ";password=" + password +
";data source=(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)" +
"(HOST=" + ipServer + ")(PORT=" + port + "))(CONNECT_DATA=" +
"(SERVICE_NAME=" + bdName + ")))";
OracleConnection conn = new OracleConnection(oradb); <---------------------------- here the error start
OracleConnection conn = new OracleConnection(oradb);
try
conn.Open();
return conn;
catch (OracleException ex)
switch (ex.Number)
case 1:
throw new ArgumentException("duplicate data");
case 12545:
throw new ArgumentException("not database available");
default:
throw new ArgumentException("Error: " + ex.Message.ToString());
catch (Exception ex)
throw new ArgumentException(ex.Message.ToString()); <----------------------------- error: "System.NullReferenceException"
I hope this be more clear, Oracle works on Windows 2003 Server rc2, ver. 10G
Edited by: user1322277 on 04-ene-2010 12:06

Webcam problems with Equium A60

I have a Creative Ultra Live for Notebooks which I can not get to work with my Equium A60-156.When I install the software it tells me that no drivers have been installed and that the device in not recognized.I have the latest BIOS & have tried changing the powersave settings & various other solutions Creative have suggested all to no avail !
Has anyone else had this problem and overcome it ?
Creative discussion forums are full of people with toshiba notbooks with this problem.
Help ! I am getting desperate.

Hi, I don't have the create ultra live webcam but I do have the creative notebook cam installed on my A60-181 so I guess it can't be much different. It's possible the driver installation wasn't success and will need to be re-installed. Have a look in device manager if you see any yellow marks regarding an unknown USB device then remove it. Run the install program again then plug in the webcam afterwards not before. Does it say something like found new USB device and prompted you for installing drivers?? Click on "recommended" then later it will say "these drivers are unsigned..." etc. you have to "OK" otherwise the drivers wont install.
Richard S

Ideapad S10-3 Webcam Problem with Windows XP

Hi folks,
I own a Ideapad S10-3 shipped with Windows 7 Starter.
Because Windows XP is much faster on this machine, I installed Windows XP Professional SP3.
After Installation I downloaded all S10-3 Windows XP drivers available at the lenovo site for S10-3.
No installations problems so far, the webcam was working and recognized as Lenovo EasyCamera
Vendor ID: 5986 Product ID: 0190 Rev: 1409. Driver Provider is displayed as "Vimicro"
After a few days using the netbook, one day i started windows and the new hardware found wizard started and recognized a new USB Video device and installed the UVC driver from Windows. This "new" device has Vendor ID: 0ac8 and Product ID: 3450 Rev: 0130. The old webcam with the old IDs isnt shown anymore in the device manager. (only if you set var "devmgr_show_nonpresent_devices=1" and enable "show hidden devices")
When i try to use the webcam the light beside the webcam turns on, but no picture is displayed. No matter which program i try, the webcam isnt working anymore.
Because of the different device ID it isnt possible to install the lenovo webcam driver, but basically the webcam should work with the UVC driver provided by windows. I find it totaly strange that the webcam is showing up suddenly with a different device id.
When windows is running theres an process VM322_STI.exe running, its part of the Webcam driver and gets installed.
This is the second S10-3 Netbook on which i have this problem, i returned the first one because of this problem.
Is someone here, who is also using the S10-3 with XP or has an similar problem ?
EDIT: I read about the firmware update problems/issues with the old S10 models, but theres no Firmware on the S10-3 website i think, so i didn't think that i accidently flashed a wrong firmware to this webcam. I only used the Device manager to install the webcam driver. Or is it possible that the firmware is included in the driver package?
regards
RaiHei

IT's working again... very strange ... the driver on the lenovo site for this webcam seems faulty, i uninstalled it, and after the reboot the old cam with the old device id is back in the device manager ... i now use the uvc driver and NEVER install the lenovo driver again... just because of the driver i returned my first s10-3 .
Also very interersting: After the cam didnt work in Windows XP anymore, i recovered the original Win7Starter from an complete hdd image (which i made before installing win XP) and in Win7 the cam wasn't working too. Because of that i never thought that it was a driver problem, because the driver and windows xp was deleted when i recovered the original win7.
so my recommendation: DO NOT install the lenovo driver, let Windows XP use its own UVC driver.

Webcam problems with iMac

Hi,
Just got a new imac - trying to get the camera to work with aMSN but a problem keeps popping up about a firewall or router problem.
I called Apple they tell me to call the router people - they router people ask for a "port number" (example: 21 or 80) call back the Apple people and no one has any idea what a port number is.
I'm stuck.
The router people know its a imac and that the camera is built in. I can't be the only one that has this problem, no?
Anyone found a solution?
Thanks in advance for any kind of help with this - seems like I'm in the dark with all of it.
M.

Hey Martin and Welcome to Apple Discussions,
Unfortunately you're in the wrong forum, this is the iMac G4 forum. You need to post here:
http://discussions.apple.com/category.jspa?categoryID=189
There people will have the experience with your Intel iMac and Snow Leopard.
Richard

Problem with wlm

Trying to connect to http://localhost:18001/wlm the error occurs:
"HTTP Status 404 - /wlm
type Status report
message /wlm
description The requested resource (/wlm) is not available."
Could you tell me, what can be the cause of this?

Thanks for the nice info J.J. Can you steer me to the right site. I had some problems finding it. Somehow I ended up here trying for Customer support.
Adobe Bridge and Photoshop were just fine till the update messed everything up, but I went into preferences to have all my files open PS from Bridge so I can at least use it until it crashes when I shut it off. Sigh! I have lost two immediate family members in the last few months and I apologize to all for being a bit techy and posting in the wrong place. Not good at this kind of stuff.
Pam

Webcam problem with Yosemite

I would like to know why my webcam dosen't work anymore on facebook since I installed the new Yosemite.

An Apple-Authorized Service Provider will be able to tell you why.

Hp pavillion dv6700 webcam problem with windows 7

I have hp pavillion dv6700, which had Windows Vista originally. I upgraded to Windows 7 and the webcam doesn't work amymore. When I launch Cyberlink Youcam, i get message " No video detected, please install camera" I have updated BIOS and all windows update and nothing works. "Image Device" in not shown under device manager. Please help

Hello Abzozo1. I understand you're getting the "webcam not detected" error.
What is the exact product number of the notebook? This document can show you where it is located.
Has the webcam ever worked since you upgraded the operating system?
To ensure that you have all of the software installed properly I suggest installing the HP Software Framework and HP Support Assistant. You can then run HP Support Assistant and it will automatically install any missing software. If that doesn't resolve the issue I suggest you take a look at my thread located here. This thread covers the common solutions to this error.
Take a look at that thread and let me know if any of the steps help.
Have a great day! I'll keep an eye out for your next reply.
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.

Problem with webcam capture

Dear all,
Using the Peter Parente's "webcam capture" library (Webcam Continuous Capture.vi), I faced some problems. In fact instead of showing for example one 320*240 picture it displayed some smaller pictures with some other parts of the picture indicator left blank(black).
What's the problem. Any help would be appreciated.
Regards

Hello Smal,
I did a search for this library and it looks like it was developed some time ago. The FAQ on the download page seems to indicate that you need to make sure that your acquisition parameters in Windows and LabVIEW need to match in order for this to work properly. There was also a data type change between Vision 6.1 and 7.0 so that could be related, but it sounds more likely it is something else.
If your camera is DirectShow compatible and you have Vision, you can try IMAQ for USB. This, like Peter Parente's Library, is not actively being developed or supported by National Instruments Applications Engineers, but you may have some more luck, assuming you are using more recent versions of LabVIEW and Vision.
If there is a problem with a specific VI, please try to narrow down where the problem is occurring. You may be able to post an image that might indicate how the library is failing.
I hope this helps! Good luck with your application.
Regards,
Angela
Applications Engineer

Problem with W530 and WebCam

I have a ThinkPad W530, which runs a 64-bit version of Windows 7. The computer is about 3 months old.
I'm suddenly having problems with the webcam, showing an entirely black display. No error messages of any sort, and I'm seeing the same results in any of my apps that use a webcam, including Skype, GoToMeeting and VSee.
How do I find this problem and fix it?

Responding to three replies simultaneously:
1) A check of the Imaging Devices section in the Device Manager shows that I have "Camera Plus (VGA Resolution Maximum)" , where it's using a Lenovo Driver (version 1.0.1.1) and dated 6/19/2012. No entry for "Integrated Camera".
This one could be part of the problem, a missing driver, although Windows Plug-and-Play isn't detecting that anything is missing.
2) No change in behavior, if I halt the Camera Mute service.
3) Drivers are mostly current, unless there's one that's entirely missing. There's several unrelated drivers that aren't current. As a rule, I don't update drivers, unless there is a reason to do so -- I have experience with driver updates being disruptive. It's one thing to update the driver for the webcam, if I'm having problems with the webcam, but I'm not going to update a Bluetooth driver, Just Because, especially if the offered update's severity is less than Critical.
If Windows isn't auto-detecting Integrated Camera, I don't know if that means that the auto-detect is simply missing that (and that I should try to find that driver and install), or that my hardware isn't using that particular driver.

Problem with integrated webcam

I have a problem with my integrated webcam. It's working but there's a lot of glitches so it's impossible to use to record or to skype with. I've tried to chose a lower quality for it but it doesn't matter.
What can I do?

@SB92 ,
Hello and thank you for posting on the HP support forums.
So that we can best help you could you please post back with you systems key information.
Model and Product Number.
As well include any attempts you have tried to correct your issue such as updating drivers or reinstalling software.
I hope to hear back from you soon.
Thank you again for posting and have a great day.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
D5GR
I work on behalf of HP

Big problems with creative webcam instant (sample included)

yesterday i purchased a creative webcam instant, and i am dissapointed in the quality of the video.
The frame rate is great, however there is artifacting and the video jumps around all over the place.
I have never had a problem with any other imaging devices before, so i cant see why this is happening with this camera.
This happens with the creative webcam center, and also in any other application that uses video from the camera (such as any instant messenger program)
Here is a .88 meg file to show you how the video jumps around.
http://steven.moondrummer.com/misc/space/4328.avi

Blah! The WEBCamInstant is "cheap" & nasty & for beach light only.
1. You have a USB-2?
-> calgarysteven ... 0-24-2004 09:47 PM
2. Try in WebCamCenter - Capture - Source - Exposure to Min. Too dark?

Webcam problems with wlm 8.5

Similar Messages

Maybe you are looking for