Webcam Recognized but no Image Lenovo Z50

I have looked around at other posts and they say to check permission, drivers etc. I have been using skype previosuly and had no problems. However, about a week ago it decided it doesn't want me to see the cameras from both myself and the reciver of the call. The person I am calling can see me and themselve on their screen. On my screen I get a black box and I can't see them either. It also comes up with the video logo with a line through it (Showing its disabled) and I click it and it doesn't change. If anyone can help it would be much appreciated.
Attachments:
1.jpg ‏235 KB
2.jpg ‏164 KB

Please,  run the DirectX diagnostics tool.
Go to Windows Start  and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post.
Be aware that you will have to zip this file before attaching it here.

Similar Messages

  • USB webcam recognized but cannot get it to work

    Hi,
    May be this was posted earlier, i tried looking but could not find anything. Question is that i have a webcam which used to get detected as a PC CAMERA in a PC. When i plugged it into the MacBook, i thought it did not see it at all. Fiddled around a little and found that it showed up in the system profiler under USB devices as "Guess What" PC CAMERA. Now how to get to use it. Its a night vision cam which has a 1.3 MP resolution. All applications open the built in isight, how do i get them to work with the new cam which is recognized as PC CAMERA.

    Windows 7 operating system....constantly pops up with a window that says I am not on the internet and can't register my product....obviously I am on the internet at this moment because I am posting on an online forum.   I downloaded the software four times now, after uninstalling it three times.  I downloaded XI Pro. 

  • Iphone is recognized, but not identified correctly

    Hi,
    i have a problem with my iphoe 4 under Win 7 x64. Everytime i connect the phone iTunes shows me the message like 'iphone is recognized, but not identified correctly' (in German: ein iPhone wurde entdeckt, konnte jedoch nicht korrekt identifiziert werden.)
    I have a debug log attached.
    Uninstall an Install newest iTunes have i repeated three times. I checked every USB-port and i have disabled my virus scanner G-Data.
    Anyone any idea?
    Greetings Stephan
    [8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe]
    ====================================
    AppleMobileDeviceHelper.exe begins
    ====================================
    [8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] parent process: 6300 "iTunes.exe"
    [8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] main thread 4108
    [8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] command line: "C:\Program Files (x86)\Common Files\Apple\Mobile Device Support\AppleMobileDeviceHelper.exe" --pipe \\.\pipe\30122278-1496151065100246300 --parentPipe
    [8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] ALLUSERSPROFILE=C:\ProgramData
    [8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] APPDATA=C:\Users\bomholt\AppData\Roaming
    [8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] asl.log=Destination=file;OnFirstLog=command,environment,parent
    [8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] CLASSPATH=.;C:\Program Files (x86)\Java\jre6\lib\ext\QTJava.zip
    [8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] CommonProgramFiles=C:\Program Files (x86)\Common Files
    [8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] CommonProgramFiles(x86)=C:\Program Files (x86)\Common Files
    [8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] CommonProgramW6432=C:\Program Files\Common Files
    [8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] COMPUTERNAME=SBSM6300
    [8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] ComSpec=C:\Windows\system32\cmd.exe
    [8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] FPNO_HOSTCHECK=NO
    [8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] HOMEDRIVE=C:
    [8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] HOMEPATH=\Users\bomholt
    [8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] lib=C:\Program Files\SQLXML 4.0\bin\
    [8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] LOCALAPPDATA=C:\Users\bomholt\AppData\Local
    [8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] LOGONSERVER=\\SBSM6300
    [8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] MOZCRASHREPORTER_DATADIRECTORY=C:\Users\bomholt\AppData\Roaming\Mozilla\Firefox\Crash Reports
    [8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] MOZCRASHREPORTER_RESTART_ARG0=C:\Program Files (x86)\Mozilla Firefox\firefox.exe
    [8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] MOZCRASHREPORTER_STRINGSOVERRIDE=C:\Program Files (x86)\Mozilla Firefox\crashreporter-override.ini
    [8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] MpConfig_ProductAppDataPath=C:\ProgramData\Microsoft\Windows Defender
    [8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] MpConfig_ProductCodeName=AntiSpyware
    [8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] MpConfig_ProductPath=C:\Program Files (x86)\Windows Defender
    [8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] MpConfig_ProductUserAppDataPath=C:\Users\bomholt\AppData\Local\Microsoft\Window s Defender
    [8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] MpConfig_ReportingGUID=1B1BB305-BF4F-4BA6-8BD8-01850E52FC93
    [8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] NLSLANG=GERMANGERMANY.WE8ISO8859P1
    [8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] NUMBEROFPROCESSORS=2
    [8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] OS=Windows_NT
    [8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] Path=C:\Program Files (x86)\Common Files\Apple\Apple Application Support\;C:\Program Files (x86)\Adobe\Reader 9.0\Reader\plug_ins;C:\Program Files (x86)\Adobe\Reader 9.0\Reader\;C:\Program Files (x86)\Mozilla Firefox;C:\Windows\system32\ora11g\;C:\Program Files (x86)\PC Connectivity Solution\;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\Sy stem32\WindowsPowerShell\v1.0\;C:\Program Files\Intel\WiFi\bin\;C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files (x86)\Microsoft SQL Server\80\Tools\Binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files (x86)\Microsoft SQL Server\90\Tools\binn\;C:\Program Files (x86)\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files (x86)\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files (x86)\Microsoft Visual Studio 8\Common7\IDE\PrivateAssemblies\;C:\Program Files (x86)\Vulcan.NET\Bin\;C:\Program Files (x86)\Common Files\Acronis\SnapAPI\;C:\Program Files\TortoiseSVN\bin;D:\Program Files (x86)\Vulcan.NET 2.0\Bin\;C:\Program Files (x86)\QuickTime\QTSystem\;C:\Program Files (x86)\CVSNT\
    [8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
    [8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] PROCESSOR_ARCHITECTURE=x86
    [8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] PROCESSOR_ARCHITEW6432=AMD64
    [8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] PROCESSOR_IDENTIFIER=Intel64 Family 6 Model 23 Stepping 6, GenuineIntel
    [8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] PROCESSOR_LEVEL=6
    [8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] PROCESSOR_REVISION=1706
    [8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] ProgramData=C:\ProgramData
    [8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] ProgramFiles=C:\Program Files (x86)
    [8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] ProgramFiles(x86)=C:\Program Files (x86)
    [8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] ProgramW6432=C:\Program Files
    [8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] PSModulePath=C:\Windows\system32\WindowsPowerShell\v1.0\Modules\
    [8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] PUBLIC=C:\Users\Public
    [8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] QTJAVA=C:\Program Files (x86)\Java\jre6\lib\ext\QTJava.zip
    [8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] SESSIONNAME=Console
    [8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] SystemDrive=C:
    [8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] SystemRoot=C:\Windows
    [8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] TEMP=C:\Users\bomholt\AppData\Local\Temp
    [8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] TMP=C:\Users\bomholt\AppData\Local\Temp
    [8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] TNSADMIN=d:oracleproduct11.1.0db1\NETWORK\ADMIN\
    [8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] USERDOMAIN=sbsm6300
    [8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] USERNAME=bomholt
    [8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] USERPROFILE=C:\Users\bomholt
    [8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] VS100COMNTOOLS=C:\Program Files (x86)\Microsoft Visual Studio 10.0\Common7\Tools\
    [8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] VS90COMNTOOLS=C:\Program Files (x86)\Microsoft Visual Studio 9.0\Common7\Tools\
    [8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] VSTO_SUPPRESSDISPLAYALERTS=0
    [8416 @ Tue Dec 21 16:49:29 2010] [YSLoader AppleMobileDeviceHelper.exe] windir=C:\Windows
    [6300 @ Tue Dec 21 16:49:35 2010] [(unknown facility) iTunes.exe] AMDeviceCopyValue (thread 9616): There was an error getting the value for [com.apple.mobile.iTunes]:[] from lockdown: InvalidResponse
    [8416 @ Tue Dec 21 16:49:50 2010] [YSLoader AppleMobileDeviceHelper.exe]

    I had a little time to elaborate with and getting involved more deeply. I found out that there was an old installation of IrfanView (some older version) which probably interacted with the iTunes. After unistallation both iTunes (including registry entries and all files from disk) and that sh*t (=IrfanView), the new iTunes installation ran properly and the problem was solved.
    It could be caused by the exact combination of: Win7, iTunes 9 or 10, IrfanView, Lenovo T400 and probably something more I cannot recognize .
    p.s. During the problem solution I bought me a brandnew iPhone 4 so I was able to test it both with iPhone 4 and iPhone 3. The result was - It does not matter what iPhone do you have...

  • Hp TrueVision HD web cam does not work. The light will come on but no image appears in the window.

    Hi.
     I have an HP Pavilion dv7 6178us Entertainment PC I just bought it last week. My operating system is Windows 7 Home Premium Service Pack 1 64 bits.
    The problem I have is that yesterday I install Skype in the computer and realized that the HP TrueVision HD web cam does not work. The light right next to the web cam will light up but no image will appear on the screen.
    I have checked the software that  I have in the computer for the webcam and the program is CyberLink YouCam BE version 3.5.
    But the web cam does not work. The light right next to it will turn on when I activate Cyberlink, Skype or Messenger but no actual image will come out in computer screen. The computer is fully updated BIOS, Windows 7 and HP.
    But the web cam is not working. Could you help me fix this problem?
    Best regards:
    JEIO71

    I have a pavilion dv6 notepad. it's about a year old.
    about a month ago internal webcam truevision hd stop working.
    Called hp tech. they sent a box for me to ship the laptop.
    they hp tech attempted to correct the problem via internet
    did not work.
    wanted me to do a restore to factory setting i stopped him there.
    Webcam detected in device manager.
    the webcam light come on but no image.
    I actually see the back drop through the image space.
    running windows 7, fully updated.
    I found many comments on the web about the webcam connector disconnecting.
    But if it was the case with my computer, the webcam would not be detected.
    Many other comments suggests to do a restore to factory setting but \i read also that
    does not work often.
    I read many comments where disappointed clients believe hp should update
    the software but the driver is actually microsoft dating back to june 2006.
    Is it possible it's  a hardware problem, ie webcam is burned out.
    I have received a box to sent it and know they will do a system restore.
    Don't feel to go that way.
    Many comments refers to hp making an effort to get a driver update.
    ps I decided to purchase a logitech webcam, works perfectly.
    What else can I do to fix this problem.
    Can hp send me another internal webcam.

  • IPod screen illuminates but no image; iPod won't power off

    iPod hard drive whirrs and screen illuminates, but no image (text or other) appears. iPod won't power off. iPod is recognized by iTunes only when in disk mode. Multiple restores were useless in restoring the screen function. Tools such as Disk Utility and Disk Warrior verified the directories were satisfactory. Can't locate a hardware diagnostic tool that can diagnose an iPod; and because the screen is malfunctioning, I can't run the iPod's built-in diagnostic routines.
    Any solutions, or is this iPod destined for the repair shop?

    If your iPod will not power off, unplug it from any power supply and wait for it to run the battery down completely. Then it will power off simply because there is not enough power to keep it running. (It may take 24 hours to do this.) Once this has happened, plug the iPod back into your computer. After about 30 minutes, you should see the "Please wait, very low battery" message. After a while longer, the iPod will have enough power and should reset itself. If not, re-post, but see below.
    At the bottom of your post you state that you have a 30GB video iPod. In that case, if you need to re-post, it would be better in the 5th generation iPod forum, (either 5th generation or 5th gen late - see http://support.apple.com/kb/HT1353 for more information) as there will be posts from owners of the same model as you have, and with the same problems.

  • Screen illuminates but no image/menus; iPod won't power off or restore

    iPod hard drive whirrs and screen illuminates, but no image (text or other) appears. iPod won't power off. iPod is recognized by iTunes only when in disk mode. Multiple restores were useless in restoring the screen function. Tools such as Disk Utility and Disk Warrior verified the directories were satisfactory. Can't locate a hardware diagnostic tool that can diagnose an iPod; and because the screen is malfunctioning, I can't run the iPod's built-in diagnostic routines.
    Any solutions, or is this iPod destined for the repair shop?

    If your iPod will not power off, unplug it from any power supply and wait for it to run the battery down completely. Then it will power off simply because there is not enough power to keep it running. (It may take 24 hours to do this.) Once this has happened, plug the iPod back into your computer. After about 30 minutes, you should see the "Please wait, very low battery" message. After a while longer, the iPod will have enough power and should reset itself. If not, re-post, but see below.
    At the bottom of your post you state that you have a 30GB video iPod. In that case, if you need to re-post, it would be better in the 5th generation iPod forum, (either 5th generation or 5th gen late - see http://support.apple.com/kb/HT1353 for more information) as there will be posts from owners of the same model as you have, and with the same problems.

  • Lenovo Z50-70 compatibility issue between power management ....

    Hello I got my Lenovo Z50-70 Back in May 2015 and decided to reinstall the OS cause I didn't want the bloatware that came with the computer. I installed the drivers that came with the computer and now I'm getting a power management compatibility issue that I can't seem to find the solution to online. I believe this is part of the problem as to why my computer only charges to 60%.  Some forums have suggested Bios issues but idk how I would go about approaching that issue so if anyone could help me solve this issue, that would be greatly appreciated.  Description
    Windows detected a new device attached to your computer, but could not find the driver software it needs to make the device usable. Each device manufacturer typically includes driver software of a CD that comes with the device, or as a download from its website. The hardware ID of your device is ACPI\VEN_VPC&DEV_2004.Problem signature
    Problem Event Name: PnPDriverNotFound
    Architecture: x64
    Hardware Id: ACPI\VEN_VPC&DEV_2004
    OS Version: 6.3.9600.2.0.0.768.101
    Locale ID: 1033Extra information about the problem
    Bucket ID: a174dfba8fc39d6da507dde9f5dc0925 (-1543083658)  

    hi sreedhar2009,
    Welcome to the Lenovo Forums.
    Just to verify, was the machine running on Windows 7 before and you upgraded to Windows 8 via the upgrade advisor?
      - If this is the case then you will need to uninstall the Lenovo Energy Management for Windows 7 from the Control Panel > Programs and install the Windows 8 versions below (reboot if necessary):
    For Lenovo G580 (2189, 20150):
    Lenovo Energy Management
    Windows 8 32/64bit
    em8.0.2.5.exe
    45.4MB
    For G580 (2689, 20157):
    Lenovo Energy Management
    Windows 8 32/64bit
    em8.0.2.3.exe
    45.4MB
    Regards
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Lenovo Z50-70 USB3.0 problem

    Dear Team, I am unble to install USB 3.0 drivers for Lenovo Z50-70 laptop. Drivers downloaded from lenovo site. When I am trying to install drivers it's showing error  " this computer does not meet the minimum requirements for installing the software" ......  Lenovo Z50-70  ( Core i7/8GB/1TB)Model  : 20354OS :  Windows 8.1 Single Language ThanksSolomon    

    No luck....Same Kinect 2.0 working perfectly in DELL INSPIRON 15R (5520 MID 2012) with USB3 default drivers (Microsoft) If i connect same to Lenovo Z50-70...Kinect 2.0 view/vidoe is lagging/hanging Downloaded all the drivers and updated. BIOS also updated. But same issue I am not able to find/understand problem with USB 3.0 drivers or graphic card drivers  If i want to do any setting please suggest me..................Thanks in advance  ThanksSolomon    

  • Lenovo Z50-75 : Critical Process Died

    Hi, i bought lenovo z50-75 few months ago. I'm trying to update my computer on 21/07/15 as it suggest to update and restart.But then it stuck during update and blue screen with a sad face appeared.It said that my laptop having CRITICAL PROCESS DIED error.After it collected all the data and restarted,this error keep coming to me and i have no idea what's going on.The blue screen keep coming to me just after a few minutes/seconds i restart my laptop. I tried to go into Safe Mode so that i can run a scan or anything.But this is another problem.I can't launch Safe Mode. For your information,i just bought this laptop on March (if i not mistaken).I didn't expect that i'll facing this severe issue just after few months i bought it,not even half a year!Now i can't even backup my files in my laptop due to this Blue Screen problem! Do you have any solution?Do you provide on-site repair service?   

    I can't use a restore point because my laptop keep showing blue screen.So i tried refreshing my system and it worked.Now my laptop is ok.Thank you. I  still have two questions. First of all, now i refresh my system and it restore to original system.If my laptop suggest to update should i update it or not? Second, my apps gone after i refresh the system.Some of my apps such as Art Rage and Autodesk SketchBook can only download once with license, now the apps gone, how can i redownload it?

  • Lenovo Z50-70 Screen shows white as yellowish

    My laptop Z50-70 had one problem with it, since day one: The screen showed the white colour as yellowish. I thought it was something that is common to all such machines, so I compensated it by using Color Management in Windows to decrease yellow's intensity.
    There's a yellowish tint to the
    Recently I saw a friend's Lenovo Z50-70 without the same yellow tint. As it turns out his screen showed normal white normally. So I chatted with Customer Care and they asked me to send pictures of my screen's white. I did, but they said it's not noticeable.
    What should I do?
    I have reset my PC, reinstalled all the proper drivers at the right time, and nothing seems to improve.

    How is the screen brightness in Windows Safe Mode?
    Does the F11 & F12 Hot Keys adjust the brightness?  If not, you might consider doing a clean install of the Lenovo Power Management driver. In other words uninstall it, reboot and do a clean install with a fresh copy. 
    In some respects the Power Management driver does have some influence on screen brightness. Since your problem is somewhat connected to a charging cycling which also falls under the Power Management driver, you might consider doing a clean install of that driver anyways.
    Here is a link to the Power Management driver....
    http://support.lenovo.com/us/en/products/laptops-and-netbooks/lenovo-z-series-laptops/lenovo-z50-70/downloads/DS100548 

  • Lenovo Z50-70 Notebook (59-436412) -Caddy

    What is the HDD caddy size (thickness), 9.5mm or 12.7mm? for Lenovo Z50-70 Notebook (59-436412) (4th Gen Ci5/ 4GB/ 1TB/ Win8.1/ 2GB Graph)

    hi ashjs,
    The Z50-70 uses a 9.0mm ODD. You may be able to get away with a 9.5mm universal HDD caddy but it will be a tight fit.
     - Link to picture
     - Sample item
    Edit:
    Added links
    Regards

  • The Lenovo Z50-75 has a faulty display

    Hello, I just got back today after picking up a Lenovo Z50-75 laptop. Just after starting it up I upgraded to Windows 10, while I was working. When it finished It started up with my own lock screen wallpaper and I noticed some colour banding issues. I figuired it was a driver problem, and needed to update. This was NOT the case. I was truly sad to see that this laptop suffers from a serious and even more importantly a KNOWN fault. Clearly the display is not accepting 32-bit color and this results in the color banding that was extremely evident on the display. Now the worst part is that Lenovo apprarently do not care about this issue, or for some reason think that tilting a display can affect the color bit, which is ridiculous. I want to make this as clear as possible. Lenovo have not just lost a customer for life, but being apart of the tech industry myself, I get asked a lot on which brand to choose, to which I will always tell people to avoid Lenovo. I should have done better research on this issue before purchasing, but i'm still treuly gobsmacked by Lenovo's repsonse and overall stance on this issue. You actually locked out the original thread about it as well. Your simply disgusting. The laptop has already been packaged up and goes back tomorrow, and like I said before, I will never buy a Lenovo product again, and not because I'm afraid of a fault, but because your support is clearly terrible and you don't make reliable prodcuts. At least not prodcuts your willing to stand by.

    Okay, I have done some research on this issue. To be honest, it really got to me how something like this good happen in the first place.
    Anyway.
    Upon checking out some other color banding causes, I came across other users with HP laptops/tablest that had the exact same issue as described above.
    The correlation here is that both devices use two froms of graphics, with an lower spec internal and a higher spec dedicated. Exactly like the above laptop.
    It seems the graphics card did not enable dithered mode when signalling the 6-bits with the monitor, which uses this method for true color. A common technique for cheaper panels.
    The point being is that this issues is nearly identical with too many correlations to ignore.
    The HP laptop issue was solved with a bios update, which means it was a driver issue or technically a bios issue.
    Does Lenovo care to comment on this. Since a different manufacturer had the same exact issue, and was able to fix it. It clearly shows that Lenovo were wrong, and really were trying ignore the fault.

  • Remote printer is recognized but message says can't find printer?  It worked great before installing OSX Maverick

    Remote printer is recognized but message says can't find printer?  It worked great before installing OSX Maverick?

    Thank you for your response.
    Unfortunately I have already rebooted the router and that did not fix the problem. The weird thing is that the computer is connected to the network, it just won't connect to my computer. I have printed the network configuration page to confirm this, and it says the wireless signal is strong. 
    I have not changed anything at all recently in terms of routers, networks, etc. The printer stopped working completely randomly.
    Is there a part in the printer that like emits a signal which computers, phones, etc are supposed to detect? I don't know enough about the mechanics to really theorize about what is wrong, but it seems like that is the only thing that stopped working. 
    Do you have any other suggestions?

  • HELP!  iPhone is recognized, but when I click on the device, all it shows is a white screen with "iphone" on it.  It doesn't allow me to sync or anything.

    My iPhone is recognized, but does not let me sync the phone or anything.
    That is the screen it shows... How it happened; I plugged in my iphone for the first time, then it asked me to register...
    My computer then froze and I clicked cancel and restarted computer.  When I turned it back on, it wouldn't go any further than simply showing the "iphone" text as shown in the picture!
    PLEASE HELP, as the customer support for Apple says they can't.

    Mobile me has been discontinued for over a year.  What system  and iPhoto versions are you running?
    How are you trying to sync?  With Photo Stream or thru iTunes?
    Do you have an iCloud preference pane in your System preferences?
    Do you meet the minimum requirements for iCloud and Photo Stream?
    iCloud: System requirements
    iCloud: Photo Stream FAQ
    OT

  • I try to insert some images on a website but the images are not in the right color mode. I do not know what to do? and also I have 1200 images to insert so I can not change one after one. So I need to set up an action, but I donot know how to do it... Tha

    I try to insert some images on a website but the images are not in the right color mode. I do not know what to do? and also I have 1200 images to insert so I can not change one after one. So I need to set up an action, but I donot know how to do it... Thanks

    What is the problem specifiaclly?
    If the images are intended for web use I would recommend converting them to sRGB which could be done with Edit > Convert to Profile or with File > Save for Web, but as including a Save step in Actions and applying them as Batch can sometimes cause problems I would go with regular converting.
    You could also try Image Processor Pro.
    Scripts Page

Maybe you are looking for