Webcam recorded frames move very slowly when copied onto cd

hello
i had recorded a few lab demos thru creative webcam.later i copied these onto a cd.but when i play from the cd,the images move very slowly (i.e)the frames moving are so apparent.how do i make it move continuously?what setting changes should i make while recording so that later when copied onto cd the image on the cd will move continously/
kindly help.
thanks.

Would cleaning out the preferences help Appleworks to run smoother? I noticed that was suggested in an earlier post.
Peggy's reply is spot on. Deleting the preferences won't make AppleWorks run smoother and it's not something you should do regularly. It's only a troubleshooting remedy - if the preference files are corrupted then it causes strange behaviour with AppleWorks.
The reason deleting your recent items makes AppleWorks smoother is because AppleWorks is programmed to check them regularly. And if there's a lot of them, then it takes AppleWorks a long time to check them. This causes AppleWorks to 'run a bit rough' – it's not just handling your typing, formatting, etc but also chasing up documents on your hard drive.
Hope the explanation helps a bit.

Similar Messages

My 2011 macmini boots very slowly when d-link usb hub is connected.

I have a 2011 macmini that boots very slowly when my D-link 7 port usb hub is attached. The hub is the newest model and has three 3TB seagate external hdd's plugged in to it. Normally boot time is about 1 minute, with hub connected it's about 3+ minutes. Shut down time is also much slower when the hub is connected. If I unplug it, boot up and shutdown time is back to normal. Does anyone know if this is normal, or do I have a bad hub or external hdd's.

It's a bit normal, OSX checks or repairs most drives connected when booting.
Use Disk Utility to Repair the external Drives.
Also, Is Spotlight indexing these drives? Is Time Machine using any of them?
Have you tried one drive connected at a time to see if it's just one or 2 doing it?
Did you Install any Seagate Software?

My Macbook Pro won't charge when it's on, only charges VERY slowly when it is shutdown

My Macbook Pro won't charge when it's on. It only charges VERY slowly when it is shutdown. Recently when it was charging shutdown, I could not get it to turn on. The only way it turned on was by removing the charger from the Macbook Pro. This only happene one time but still wondering what is going on with this battery.
Thanks for the help!

First see the MagSafe troubleshooting tips:Apple Portables: Troubleshooting MagSafe adapters and check to see that all looks ok. You might want to try using another charger in case the charger is faulty. If that doesn't help, take the MacBook Pro and charger to an Apple store genius bar and have the technicians test the system to see where the fault is.

Dreamweaver CS6 performs very slowly when using Bootstrap

I'm working with a Bootstrap template that includes alot of JavaScript and CSS files, and Dreamweaver CS6 performs EXTREMELY SLOWLY when working with this site.
It takes a few seconds to be able to scroll, especially when working in "Split" view, and everytime I want to Preview the page in a browser I must save the file and then wait 2-5 seconds for the save to complete before I hit Preview or else Dreamweaver will crash.
I've checked for updates to Dreamweaver CS6 but my copy seems to be up-to-date.
Any suggestions?

Dreamweaver performs very slowly.
This depends on a number of factors.
The operating system - apparently the latest version of Mac OS causes all sorts of problems
Processor
RAM
Disk space
External links to scripts and style sheets
In my case, I do not have a problem other than the normal ones
Windows 8.1
i7
16GB
2T
local files

Firefox not scrolling or scrolling very slowly when i open a new tab, this just started within the last few weeks. Ive tried reloading firefox but have the same problem.

when i am using firefox if i click on a link that opens a new tab the new page wont scroll or scrolls very slowly. this has never happened before and i have had many many tabs open at once without any problem, now if i have just two the second one gives me these problems while the first one continues to work fine.

'''I fixed mine by removing the Ask.com extension.'''
Tools
Add-ons
Settings icon
View Recent Updates
Ask.com '''DISABLE'''
Running FF 8.0 on Windows 7 (64-bit)

Hp probook 4403s run slowly when copy data

Why do my hp probook 4430s core i3-2330 with 4GB ram, 500GB HDD run slowly while copying data? (tested in win8-64bit, win 7-64 bit, win 7-32bit) My HDD is tested. It is in good condition, no bad sector. When i copy data (between logical drives or external drives), my laptop is running slowly and lad. It runs like a old computer with pentium 4 and ram 500MB. So, when i copy data, i do nothing and waiting it completed.. My old laptop with core2duo and ram 1GB give me both copying data and do another things like browse web easily?
Please help me solving it.

Hey mayouly,
While "slow" is a subjective term, I want to give you some things to consider. You may already be aware of these things but I wanted to put the information out there, just in case. Over time, hard drives accumulate data and the more full they are, the more time it will take a to access data, in turn slowing down the copying process. Also as you use your computer, the services running in the background accumulate and can be set to run on start up without you being aware. To check what is running in the background,
Bring up Task Manager (Ctrl + Shift + Esc) > Click on the Processes tab > Click on the Memory column to put in descending order.
This will put the heavier, resource-hogging processes at the top. Sometimes anti-viruses may have an updater service going, or another 3rd party program may have an updater service running without you knowing about it. Like I mentioned, these processes could be installed set by default to start up when you power on the computer, even if you don't open that program. For instance, after installing iTunes, the applepush (iTunes' updater service) will run every time you power on the computer. This is not the only program that sneaks these services in. Browser toolbars will sometimes do the same thing. You can also check to see what is starting up at power on by using msconfig.
Click the Start button > Type "msconfig" > click "msconfig.exe" > Click the Start Up tab.
Every thing that is checked must start at power on. There may be some unnecessary processes in that list which can simply be unchecked. You'll want to use caution though because something that may look unfamiliar might be a required driver for your computer, like audio or touchpad software. When you're done making changes, Click Apply. It will prompt you to Restart. You should see a difference, if you can get rid of some unnecessary processes running. Of course, every computer can use a recovery periodically, to clean up the clutter in the registry and get rid of unused applications and processes. You'll need to save your personal files on an external hard drive before performing a recovery because everything on the hard driver will be removed and Windows will be reinstalled.
If you go through these steps and the computer still seems slow, or if the computer has always seemed slow since you got it, you may see an increase in performance by installing additional RAM. If you haven't already used HP System Diagnostics to test your hard drive you will to follow these steps for a Hard Drive test.
Turn off the computer.
Use one of the following methods:
Turn on the computer and immediately press the F2 key repeatedly, about once every second, until the HP System Diagnostics program opens.
OR
Turn on the computer and immediately press the Escape key repeatedly, about once every second, until the Startup menu opens. Then press F2 .
The System Diagnostics window allows you to run several diagnostic tests. Each test determines if the hardware is functioning properly, and displays an error message and a warranty ID if there is a hardware failure.
I hope these steps help. Let me know if you have any questions. I'll keep an eye out for your reply

My iphone4 reacts very slowly when I use the button.Problem after updating to newest IOS

My Iphone 4 respond very slow when I use the button. The problem started when i updated to new IOS 6.0.1

Have you tried restarting or resetting your iPhone?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPhone shuts down, then press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off"

Why do pages load very slowly when using a proxy in Win 7?

Whenever I try to use a proxy server,it will work okay a couple of times. Then after that pages will start loading very slowly,so that I find that I have to uninstall the proxy program.I am using Win7 Ultimate,a netgear router, and high speed internet "10Mbps"..I have tried different proxy hiders and they all do the same thing.Can anyone help?????????????

Exceedingly slow download speeds on...: Apple Support Communities

When I show all my windows open in expose, it moves very slowly, why?

It only happened for a minute or so, then the expose moved at normal speed, should I be worried? Why did this happen?

alEx18 wrote:
It only happened for a minute or so, then the expose moved at normal speed, should I be worried?
not unless this happens again.
Why did this happen?
no idea and impossible to find out now.

Internet running very slowly when using external monitor.

I've used my HDTV as an external monitor for my various MacBooks for years with no problems. I bought a 17-inch MacBook Pro, and it worked perfectly doing the same thing for the first few months that I had it. Recently it has started to have very poor Internet speed, but only when I connect it to my TV. The Internet and my Airport Extreme are not the cause, as no one else in the house has this issue and my iPad loads sites as fast as it ever has. Plus, the MacBook Pro in question has an excellent connection once I disconnect it from the external monitor.
What could be the cause of this? I updated to 10.7.2 way back when it was released and only had problems very recently. Is there anything I can do without having to take it to the Apple Store?

Are you sure that the internet is running slowly? Or, because you're using an external monitor, you're using more memory than before and you're having some issues with memory access? You can open Activity Monitor and see how much free memory you have.
One other thing. Are you using discrete video when you're connected to a monitor? Or are you using the integrated Intel HD3000 video.

Keyboard will only type in uppercase, trackpad will high light multiple when clicking, app windows move VERY slow when using corners

I recently spilled a slight amount of water on my Mac Book Pro. I thought I was able to remove and wipe the majority of it off but I believe some may have seeped between my keys. Ever since, keys on my keyboard do not work or they type in all caps, my trackpad will select multiple objects when I click once (i.e. I attempt to open an application and it will select 5 applications and open all), when I use my hot corners to move between windows, the window I click on will 'zoom in' a very slow speed.
Could this all be a result of water damage? Or something further?
Please let me know if more information is needed.
Thanks,
PM

I recently spilled a slight amount of water on my Mac Book Pro. I thought I was able to remove and wipe the majority of it off but I believe some may have seeped between my keys. Ever since, keys on my keyboard do not work or they type in all caps, my trackpad will select multiple objects when I click once (i.e. I attempt to open an application and it will select 5 applications and open all), when I use my hot corners to move between windows, the window I click on will 'zoom in' a very slow speed.
Could this all be a result of water damage? Or something further?
Please let me know if more information is needed.
Thanks,
PM

Database reacting very slowly when enable dns

Hi frennds,
Now i have installed RHEL 5.5 on my server. And installed Oracle Database 11g Enterprise Edition Release 11.2.0.1.0.
My problem is when we set DNS values in network settings for getting connected with internet, application taken too long time to retrieve values from database. If we remove values from DNS and made the server disconnected from internet, then no issue. But we need internet connection in our server.
Previously i have installed RHEL 5.3 and Oracle 10g.. at that time i didn't faced this type of problem.
Please help me to overcome this problem
Thanks in advance

Thank u for reply friend.
In network proxy, I have chosen "Direct internet connection". And in "Advanced configuration" tab, ip addresses in Ignore Host List are "localhost" and 127.0.0.0/8.
content in my "resove.conf" file
; generated by /sbin/dhclient-script
nameserver 202.160.161.3
nameserver 202.138.96.2
nameserver 202.138.100.103
content in my "nsswitch.conf" file
# /etc/nsswitch.conf
# An example Name Service Switch config file. This file should be
# sorted with the most-used services at the beginning.
# The entry '[NOTFOUND=return]' means that the search for an
# entry should stop if the search in the previous entry turned
# up nothing. Note that if the search failed due to some other reason
# (like no NIS server responding) then the search continues with the
# next entry.
# Legal entries are:
#     nisplus or nis+          Use NIS+ (NIS version 3)
#     nis or yp          Use NIS (NIS version 2), also called YP
#     dns               Use DNS (Domain Name Service)
#     files               Use the local files
#     db               Use the local database (.db) files
#     compat               Use NIS on compat mode
#     hesiod               Use Hesiod for user lookups
#     [NOTFOUND=return]     Stop searching if not found so far
# To use db, put the "db" in front of "files" for entries you want to be
# looked up first in the databases
# Example:
#passwd: db files nisplus nis
#shadow: db files nisplus nis
#group: db files nisplus nis
passwd: files
shadow: files
group: files
#hosts: db files nisplus nis dns
hosts: files dns
# Example - obey only what nisplus tells us...
#services: nisplus [NOTFOUND=return] files
#networks: nisplus [NOTFOUND=return] files
#protocols: nisplus [NOTFOUND=return] files
#rpc: nisplus [NOTFOUND=return] files
#ethers: nisplus [NOTFOUND=return] files
#netmasks: nisplus [NOTFOUND=return] files
bootparams: nisplus [NOTFOUND=return] files
ethers: files
netmasks: files
networks: files
protocols: files
rpc: files
services: files
netgroup: nisplus
publickey: nisplus
automount: files nisplus
aliases: files nisplus
Result by $netstat -ap | grep '[0-9]\.[0-9]'
[oracle@myserver ~]$ netstat -ap | grep '[0-9]\.[0-9]'
(Not all processes could be identified, non-owned process info
will not be shown, you would have to be root to see it all.)
tcp 0 0 192.168.0.197:61266 maa03s16-in-f0.1e100.:https ESTABLISHED -
tcp 0 0 192.168.0.197:16566 par03s12-in-f15.1e100:https TIME_WAIT -
tcp 0 0 192.168.0.197:27660 bom03s02-in-f21.1e100:https ESTABLISHED -
tcp 0 0 ::ffff:192.168.0.197:16355 ::ffff:192.168.0:ricardo-lm ESTABLISHED -
tcp 0 0 ::ffff:192.168.0.197:39622 ::ffff:192.168.0.1:ncube-lm TIME_WAIT -
tcp 0 0 ::ffff:192.168.0.197:39621 ::ffff:192.168.0.1:ncube-lm TIME_WAIT -
tcp 0 0 ::ffff:192.168.0.197:39618 ::ffff:192.168.0.1:ncube-lm TIME_WAIT -
tcp 0 0 ::ffff:192.168.0.197:39619 ::ffff:192.168.0.1:ncube-lm TIME_WAIT -
tcp 0 0 ::ffff:192.168.0.197:39616 ::ffff:192.168.0.1:ncube-lm TIME_WAIT -
tcp 0 0 ::ffff:192.168.0.197:39598 ::ffff:192.168.0.1:ncube-lm TIME_WAIT -
tcp 0 0 ::ffff:192.168.0.197:39597 ::ffff:192.168.0.1:ncube-lm TIME_WAIT -
tcp 0 0 ::ffff:192.168.0.197:39595 ::ffff:192.168.0.1:ncube-lm TIME_WAIT -
tcp 0 0 ::ffff:192.168.0.197:39614 ::ffff:192.168.0.1:ncube-lm TIME_WAIT -
tcp 0 0 ::ffff:192.168.0.197:39613 ::ffff:192.168.0.1:ncube-lm TIME_WAIT -
tcp 0 0 ::ffff:192.168.0.197:39611 ::ffff:192.168.0.1:ncube-lm TIME_WAIT -
tcp 0 0 ::ffff:192.168.0.197:39608 ::ffff:192.168.0.1:ncube-lm TIME_WAIT -
tcp 0 0 ::ffff:192.168.0.197:39609 ::ffff:192.168.0.1:ncube-lm TIME_WAIT -
tcp 0 0 ::ffff:192.168.0.197:39606 ::ffff:192.168.0.1:ncube-lm TIME_WAIT -
tcp 0 0 ::ffff:192.168.0.197:39605 ::ffff:192.168.0.1:ncube-lm TIME_WAIT -
tcp 0 0 ::ffff:192.168.0.197:39603 ::ffff:192.168.0.1:ncube-lm TIME_WAIT -
tcp 0 0 ::ffff:192.168.0.197:39600 ::ffff:192.168.0.1:ncube-lm TIME_WAIT -
tcp 0 0 ::ffff:192.168.0.197:39601 ::ffff:192.168.0.1:ncube-lm TIME_WAIT -
tcp 0 0 ::ffff:192.1:personal-agent ::ffff:192.168.0.212:44151 ESTABLISHED -
tcp 0 0 ::ffff:192.1:personal-agent ::ffff:192.168.0.212:44152 ESTABLISHED -
unix 2 [ ACC ] STREAM LISTENING 866187 9776/tnslsnr /var/tmp/.oracle/s#9776.1
unix 2 [ ACC ] STREAM LISTENING 866192 9776/tnslsnr /var/tmp/.oracle/s#9776.2
unix 2 [ ACC ] STREAM LISTENING 12186 - /tmp/scim-bridge-0.3.0.socket-0@localhost:0.0
unix 3 [ ] STREAM CONNECTED 997577 - /tmp/scim-bridge-0.3.0.socket-0@localhost:0.0
unix 3 [ ] STREAM CONNECTED 867200 - /tmp/scim-bridge-0.3.0.socket-0@localhost:0.0
unix 3 [ ] STREAM CONNECTED 328869 - /tmp/scim-bridge-0.3.0.socket-0@localhost:0.0
unix 3 [ ] STREAM CONNECTED 166231 - /tmp/scim-bridge-0.3.0.socket-0@localhost:0.0
unix 3 [ ] STREAM CONNECTED 12192 - /tmp/scim-bridge-0.3.0.socket-0@localhost:0.0
while i was trying "$netstat -ap | grep '[0-9]\.[0-9]' | grep ':1521'" , following information was displayed
(Not all processes could be identified, non-owned process info
will not be shown, you would have to be root to see it all.)
And i had logged in as root and try for netstat -ap | grep '[0-9]\.[0-9]' | grep ':1521... No one result came.
I have installed Apache tomcat and oracle database in same server. Then In my case should i include anything in hosts file?
Edited by: 931246 on Feb 27, 2013 11:45 PM

Screen moves very slow when i drag a window from one corner to other.

Hi,
We are taking RDP to windows server 2008 R2 standard using Thin-clients.
If I drag a window of explorer or browser to other end of screen it is very slow.(it will work as desktop without video drivers).
Is there any solution for this.
And By the way what is application getting accelerated mean.
Thanks in advance...........

Hi,
Please check if a normal physical computer has the same issue. If not, I’m afraid that the issue is related to the performance of Thin Clients.
Please update the firmware and drivers of your thin clients to the latest and try again.
Thanks.
Jeremy Wu
TechNet Community Support

Very slow when copy files to Window Server by SMB

I have a Windows Server 2003 as a file server, at first mac client connect it whith no problem by SMB , but now, just copy a 5kb jpg file to the windows server will cost more than 5min, then we set up Apple Share on windows with errors, but Apple Share can be seen on windows, and mac client use AFP still can not see share folder, and I find error log as:
Event Type: Information
Event Source: MacFile
Event Category: None
Event ID: 12057
Date: 2007-11-5
Time: 18:23:38
User: N/A
Computer: OMBJSV10
Description:
Number of files and folders in volume "MACFile" is greater than 65535. Older Macintosh clients may not function correctly in this situation due to Macintosh volume limitation.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
All of the mac client is OS X 10.4.8 or later(the PowerMac G5 or new MacPro),
Is there anyone know how to solve this problem

I use many SMB shares at my office and the only speed issues I encounter are due to network bandwidth and overall server load. In other words, no different from an SMB client on any OS.
How many Windows PCs also connect to this server? Do the two groups use different segments of the network? Swap one of the Macs and one of the Windows PCs so they're in each other's previous segment, and do your speed tests again.

Macbook pro running very slowly when the energy cable is unplugged?

Hey Guys.
My laptop has this exact same problem. I got it in March 2012, and it was working perfectly fine both on power and on the battery.
I'm trying to apply this solution, but I'm stuck on step 3, because my Extensions folder is empty. There are no files at all in there. My Pathway was Macintosh HD/Library/Extensions/ please advice if this is the right folder.
Thanks in advance.
Oh and I ran a hardware test and it said everything was fine.
<Re-Titled By Host>

I don't know anything about this problem, but from your post you're not in the same place as the thread you were looking at. It's System/Library/Extensions

Webcam recorded frames move very slowly when copied onto cd

Similar Messages

Maybe you are looking for