Webcam software, Imaging device, Hp recovery manager

Firstly, I apologize for my English.
Second thing, I have HP Envy dv6 7210tx 3rd Gen. i7 having Windows 8.1, For the last few days, my laptop wasn't working properly. so i "Refresh" it by using a Win 8.1 DVD. After refeshing, My Integrated HP Truevision HD webcam was working properly but one day suddenly it stopped working. My Cyberlink youcam responded to Turn On the intergrated webcam. i dont know how to Turn it ON. I check the Device Manager, My device Manger doesn't has the "Imaging Device". but it had Hp webcam in Human Interface Manager. Unfortunately, I uninstalled it. I refreshed it again. Installed All the drivers again. People say webcam driver is included in Youcam Software. i did everything i could. but i neither have the imaging device nor the Hp webcam. Please Help.
the other thing, is there any Hp recovery manager for Hp envy dv6? because i didn't it even in the HP drivers for Envy dv6.

Hi FahadNagi,
Welcome to the HP Forums!
I would like to take a moment and thank you for using the forum, it is a great place to find answers. For you to have the best experience in the HP forum, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand you are having an issue with your Webcam. You are getting a message that it is turned off and to turn it on.
You can enable and disable devices in Device Manager.
If you have uninstalled the software, you can download and reinstall it from the web page. HP ENVY dv6-7210tx Notebook PC Drivers
You can also try running The HP Support Assistant to aid with HP updates and resolving issues.
Have you ran the built in troubleshooter in Windows 8.1 Using Automated Troubleshooting (Windows 8)
Have you done all your Windows updates?
You can also reinstall the software from recovery manager. Using Recovery Manager to Restore Software and Drivers (Windows 8)
You also inquired about a recovery Performing an HP System Recovery (Windows 8)
You will be presented the opportunity to backup your personal files to prevent data loss, during the recovery process. If you have not done one recently, I suggest you do one now.
Restoring Files that were Backed Up Using HP Recovery Manager (Windows 8)
I hope this helps.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Similar Messages

NOT SHOWING FACTORY INSTALLED SOFTWARES IN " RECOVERY MANAGER "

I'VE TRIED TO REINSTALL SOME SOFTWARE PROGMS BY USING " RECOVERY MANAGER ".
BUT I DIDNT FIND ANY FACTORY INSTALLED SOFTWARE PROGRAMS.
PLZ ASSIST ME.
I WILL BE WAITING FOR UR KIND REPLY.
THANK U SO MUCH.

That is odd - that is, as long as the integrity of the Recovery Manager is intact, I would expect it to work.
For example,
If you have reinstalled the system using other than the Recovery Manager,
or if you have upgraded the Operating System,
or added / Removed data from the Recovery Partition,
OR if the Recovery Manager is corrupted in some way,
then
the Recovery Manager will either not work at all, or may at least show inconsistancies.
======================================================================================
You might try using a Restore Point to "go back in time" and see if the setting can recover.
Using Microsoft System Restore (Windows 8)
HP PCs - Restoring Files that were Backed Up Using HP Recovery Manager (Windows 8)
You can go to your system's website for the current Drivers and Software that are available for your computer.
First, create a place to which you can return in case things do not work as you hope:
Create a restore point
Install Software and Drivers from HP Website
Go to the top of the HP forum page to Support and Drivers
If prompted, Enter your Country or Region and
Enter your Computer Model information,
Go to Software and Drivers...
Enter your Operating System in the Drop-down menu... Scroll down
Select desired Category Software – Solutions >> Driver - Keyboard, Mouse and Input Devices
NOTE: Download ONLY the relevant drivers and software for YOUR hardware - note that in the website you might find more than one kind of driver for more than one model of computer -- this is normal, but it does not mean YOUR computer uses all the software offered.
Expand and decide if you need to install that package.
Assure that you download and install only the most recent versions of each driver or program.
Save the appropriate *.exe installation package on your computer
NOTE the name and the location - the *.exe file will likely save to "Downloads “
Install the Software / Driver installation package: If you have ‘Admin’ control, you may highlight the package(s) and “double-click” to install, else Right-Click, Select ‘run as Administrator’ and install.
NOTE: There is sometimes a lot of information at the computer’s website. Take a look at what’s available and bookmark the page for later reference.
======================================================================================
Kind Regards,
Dragon-Fur

ORACLE8: RECOVERY MANAGER 사용 방법(RMAN)

제품 : ORACLE SERVER
작성날짜 : 1997-11-17
Oracle 8 NEW : Recovery manager 란 ?
====================================
- 소개
Oracle 8 은 새로운 backup와 recovery 방법인 Recovery manager 를 제공한다.
Recovery manager(이하 RMAN) 는 backup,restore,recover process를 관리하는
tool 이다. Oracle Enterprise Manager 를 통해 GUI mode 로 가능하고,
rman 이라는 command line interface 를 함께 제공한다.
특히, OS device control 기능이 보완 되었기 때문에, 현재 backup catalog 를
유지하고, 이 정보를 이용해 OS level 에서 file 을 auto-restore 해 주기
때문에, database recovery 전에 file 을 manual 하게 restore 할 필요가
없어졌다.
Incremental backup 을 제공하고, backup 이나 restore 중에 current block
detection 을 해 주며(v$backup_corruption, v$copy_corruption 또는 alert
log 에 report), Rman 작업시에 parallelization 을 제공하며, open database
backup 동안 특별한 redo 를 발생하지 않는다.
- 구조
Recovery
manager in OEM(oracle
          enterprise      ---> Database
          manager) <---     (catalog)
or RMAN
     /| |
     | |/
DATABASE     ---> OS
(target to backup) <--- Device
- 구성 요소 설명
1) recovery manager
Command 를 해석하고, backup, restore, recover 를 실행하기 위해 target
database 로 command 를 전달한다. recovery catalog 를 update 한다. 실행
과정을 조정, 모니터링 한다.
2) Target database
backup,restore,recovery action 이 수행될 데이타베이스
3) Recovery Catalog
Information 저장장소. 즉, target database 의 물리적 스키마, datafile 과
archivelog 의 backup sets 과 pieces, backup script 등을 포함하고 있음.
rman 작업시 recovery catalog 정보를 이용한다.
4) channel
allocation channel 은 target database 의 backup,restore,recover 에 대한
server process 초기화를 한다. 즉, 이 channel 은 disk 를 포함 기타 OS
device 를 지정하게 되며, 이 갯수에 따라 parallelization 의 degree 가 결정
된다.
- recovery catalog 를 사용할 것인지를 결정하기
catalog 없이 RMAN 을 사용할 때의 단점은 recovery catalog 의 overhead 가
없는 대신, Point-In-Time recovery 를 쉽게 할 수 없다. 또한, control file
손상시에 recovery 할 수 없고, stored script 를 사용할 수 없다.
(datafile 이 20개 이상일 경우에는 recovery catalog 사용을 권장한다.)
- Setup
가. Recovery catalog 생성
1. Backup(target) db 외의 별도의 db 생성 (8.0.3 이상)
2. catalog DB 에 분리된 tablespace 생성
create tablespace rcvcat datafile '/oracle/rcvcat/rcvcat01.dbf'
size 20 M;
3. catalog 의 owner 생성과 권한부여
     create user rman identified by rman
     temporary tablespace temp
     default tablespace rcvcat;
     grant dba,connect,resource,recovery_catalog_owner to rman;
4. catalog 저장에 필요한 object 생성
     cd $ORACLE_HOME/rdbms/admin
     sqlplus rman/rman
     @catrman
나. Recovery manager 기동
1. recovery catalog DB 를 사용하는 경우
rman target \"system/manager\" rcvcat \"rman/rman@orabeta1\"
(orabeta1 은 catalog DB 로 접속하는 tnsname 입니다.
즉, sqlplus rman/rman@orabeta1 하면, catalog db 와 접속되어야 합니다.)
2. recovery catalog DB 를 사용하지 않는 경우
rman target system/manager@target nocatalog
위 경우 모두, target database 를 catalog 에 등록해야 한다.
RMAN> register database;
다. Backup 시작
- Backup 은 database 가 open 또는 close(close 후에는 반드시 mount
상태이어야 한다)
- Backup 의 단위
     full database
     tablespace
     datafile
     control file
     archived logs
- Backup 의 예
--full database
run {
allocate channel dev1 type disk;
allocate channel dev2 type disk;
backup full filesperset 2
(database format '/user7/ora8/backup.%n_%p') ;
release channel dev1;
release channel dev2;
-- tablespace
run {
allocate channel dev_1 type disk ;
backup incremental level 0
filesperset 1
(tablespace system channel dev_1 format '/vol312/net8%d_%u');
release channel dev_1;
-- datafile
run{
allocate channel dev1 type disk;
copy datafile "/vo3/orabeta6/backup/copy_tools.dbf"
to "/vo3/orabeta6/oradata/orabeta6/tools01.dbf"
tag "org_tools";
release channel dev1;
-- archived logs
create script beta_arch_full {
allocate channel dev1 type disk;
allocate channel dev2 type disk;
backup full filesperset 10
(archivelog all delete input
format '/vo3/orabeta6/backup/beta_arch.%s_%p') ;
release channel dev1;
release channel dev2;
-- backup to tape
run {
allocate channel t1 type 'sbt_tape';
backup
format 'dbfull_sunday_s%s_t%t'
tag 'Sunday full backup'
(database);
라. Restore
- Backup 으로 부터 원래 위치로 복원
- Archive log file 은 manual 하게 restore 할 수도 있고, 필요하다면
recovery 시 자동으로 restore 된다.
restore (archivelog all| like <filename | <archivelog range>);
- restore 명령
database : restore (database);
tablespace : restore (tablespace <name>,...,<name>);
datafile : restore (datafile <name>,...,<name>);
control file : restore control file to location;
- recovery 시에 database 는 어떤 상태에 있어야 하는가 ?
1) control file restore - not mount
     SVRMGRL> startup nomount
2) whole database, or system tablespace - not open
     SVRMGRL> startup mount
3) tablespace or datafile - open but tablespace or datafile offline
     SVRMGRL> alter tablespace user_data offline temporary;
     SVRMGRL> alter database datafile '/oracle/file/user_data1.dbf'           offline;
마, Recovery
- Recoervy 는 file restore 후의 과정이다.
1) Archive log mode : complete recovery, incomplete recovery 가 가능하다
2) No archive log mode : consistent whole database backup 으로 부터
restore 하는 것이 유일한 option 이다.
- whole database recovery 의 예
svrmgrl
connect internal
shutdown abort
startup mount
rman target \"system/manager\" rcvcat \"rman/rman@orabeta1\"
run {
allocate channel dev1 type disk;
allocate channel dev2 type disk;
restore database;
recover database;
release channel dev1;
release channel dev2;
or
run {
allocate channel dev1 type disk;
allocate channel dev2 type disk;
restore tablespace 'SYSTEM';
restore tablespace 'USERS';
recover tablespace 'SYSTEM';
recover tablespace 'USERS';
sql "alter database open ";
release channel dev1;
release channel dev2;
- datafile 하나가 사용할 수 없을 경우의 recovery
가정) full backup set 이 있을 경우
ORA-01157: cannot identify data file 3 - file not found
ORA-01110: data file 3: '/user7/ora8/oradata/ORA8/temp01.dbf'
SVRMGR> startup mount
rman target \"system/manager\" rcvcat \"rman/rman@orabeta1\"
RMAN> run {
allocate channel dev1 type disk;
restore database;
recover database;
release channel dev1;
};

Check the TSM logs for errors, the error stack here doesn't show any useful information (only informational messages and an undefined exit code). This is an 8i problem, later releases transfer much better messages from the media management software.

Recovery Manager & downloading recovery manager problems 2014 version

Hi,
Firstly, I would like to say that I am sincerely greatful to Mumbodog for helping me with this problem.
Problem:
Recently bought an HP 250 G2 which had Windows 8 Home. I required Windows 8 Pro and used my upgrade disk to install. This inadvertantly wiped all other software including the HP Recovery Manager. It also made the laptop pretty much useless because all the hardware peripheral software was removed as well. If you have done this then you cannot use the recovery or pc reset tools available in Windows 8. This was extremely frustrating because there was a recovery partition available with all the software on it to restore my laptop to its original condition.
I tried everything suggested but many of the technicians simply did not understand what the problem was. Some even suggested using the recovery manager when individuals had specifically stated that the Recovery manager was unavailable to them or suggested links which then described a process that used the Recover manager.
I finally stumbled on this post and it worked. The HP recovery manager hides in F11 on boot. Please read Mumbodog post that follows:
Mumbodog
Associate Dean
Re: Download Recovery Manager
Options
‎09-21-2011 10:37 AM
The full recovery manager program is not available for download, the only way I know to get it back is to use HP Recovery from the hard drive (F11 at boot time) or Recovery media to re-install Windows and all the HP software. You will lose all personal data when you do this so back up before restoring.

Hi,
If you have created your USB Recovery, use this to perform the reinstallation.
If you don't have this, you can order a replacement Recovery USB Kit using the link below and use this to reinstall Windows.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00810334&cc=us&lc=en&dlc=en
If you have any problem with this link, order them directly from HP - make sure to specify that you require the USB Recovery Kit.
If you live in the US, contact HP Here.
If you are in another part of the world, start Here.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

After updating to Windows 8.1 the Webcam in my Inspiron is gone and Imaging devices missing in Device Manager

my webcam in my Dell Inspiron 3521 was working fine with Windows 8. After updating to Windows 8.1 the Webcam in my computer is gone and the 'Imaging devices' is missing in the Device Manager. how can I get the Webcam back?
thank you very much.

I don't see anything specific to your webcam issue but there are a number of Windows 8.1 related drivers listed on the Support site.
http://www.dell.com/support/home/us/en/04/product-support/product/inspiron-15-3521/drivers
The Dell Update utility will recommend drivers that are needed specific to your model.
http://www.dell.com/support/home/us/en/04/Drivers/DriversDetails?driverId=860YD&fileId=3374847033&osCode=WB64A&productCode=inspiron-15-3521&languageCode=EN&categoryId=AP
Good luck!
bill
Regards, Bill Moore @BMooreAtDell

Prime Infrastructure 1.2 - Software Image Management

Good Day,
I have some issues with CPI 1.2. I've tried to Import Images from Cisco.com through Software Image Management
for test purposes by using my credentials. But it has finished success just a twice. Other attempt hadn't any result.
Then I try to choose Image for my test 3750E switch, sometimes I have error message like bellow:
After I choose another image and return to first that I need, and press <Submit>, I have a message that "Image collection job CCO Image Collection Job is Scheduled Successfully":
I wait some time and refresh, but I don't see any new Images. The same problem exist then I try Import Images from connected Devise. I use Shedule Start Time - Now.
Also, I can't view any information about Image in Device Work Center:
Any ideas, guys?

I'm having the same issue. I'm thinking there are still a lot of bugs in PI that Cisco needs to work out. LMS is still the better option for now in managing your switching environment. I know that Cisco hopes to role all device management under the umbrella of PI, but they still have some bugs to workout IMO.

LMS Software Image Management - Telnet failure

Hi all,
I had a problem with Software Image Management for the upgrade of a switch.
It seems that at the end of the upgrade, CiscoWorks was unable to save the configuration with telnet.
Yet, telnet seems to be ok because CiscoWorks manages to connect to the switch at the beginning of the upgrade.
Updating config file during software upgrade processDevice running-config is modified but failed to save the running-config to startup-config.Cause: Could not detect SSH protocols running on the device
TELNET: Failed to establish TELNET connection to 10.1.3.4 -Cause: Authentication failed on device 3 times.
I sent attached the logs of the upgrade.
Thank you in advance.

Hello,
The job fails last night after timeout.
I have reschedule job this morning for 2 switchs :
2960 with telnet and ssh enabled
2960 with telnet enabled only
The device credentials verification job seems to be coherent :
Device Name
Read
Community
Read Write
Community
Telnet
Enable
by Telnet
SSH
Enable
by SSH
1.
switch04-d
Ok
Ok
Ok(Primary Successful)
Ok(Primary Successful)
Failed to connect.
Did Not Try
1.
switch03-d
Ok
Ok
Ok(Primary Successful)
Ok(Primary Successful)
Ok(Primary Successful)
Ok(Primary Successful)
But the job fails again cause telnet authentication failed on device 3 times.
I do not understand why LMS does not use ssh if possible at the finish of the job? Why telnet authentication fails ?
Thanks in advance.

Urgent problem with Recovery Manager's File backup operation: No storage device detected

I have a Pavilion g7-1070us laptop that failed to start and simply displays a blue-screen with a blinking cursor (no error message).
I could NOT get into safe-mode by hitting F8, but was able to activate the “HP recovery manager” by hitting F11.
I was trying to back-up my files before triggering the system restore. It asked me what types of files to back-up, then scanned the computer for these files and was finalizing the files for back-up; then suddenly an error message showed up saying something like "No storage device detected. Make sure the removable disc drive is connected to computer". But I have both a blank DVD sitting in the optical drive and a USB drive attached!!!!!!
I was expecting the system to ask me where to save these backed-up files but no such question was asked and this nonsense error message appeared out of nowhere. Apparently the recovery manager couldn't see my DVD or USB drive?
Can someone throw me a life-saver here? If I cannot recover my files, I cannot proceed with the system restore and I am forever stuck here!!!!!!
Please help!!!! Much appreciated!!
This question was solved.
View Solution.

The blinking cursor means the system is attempting to load Windows, but is unable to read the boot files. There are a number of causes including hardware issues. Run the tests as before to ensure the hardware is functional. I would have to run through the software repair steps only to find it is a hardware issue. Hard drives is perhaps the most common component to have issues regardless of the manufacturer.
I suspect the hard drive will pass the test and will go ahead and link to DavidPK's posts in this thread as they have the best chance to resolve the issue without losing and restoring everything. I do recommend this step at this point since two recoveries did not resolve the issue. DavidPK's solution comes in two parts, so be sure to follow both starting with the first post and moving to the second post should the first one not do the trick.
Let me know how this goes.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Dv6775us HP Backup and Recovery Manager software corrupted - can't find download

I am getting an HP error message saying the HP Backup and Recovery Manager software has been corrupted and needs to be updated. For over an hour I have been frustrated trying to find where on this site to download a replacement of what was installed or an upgrade that would repair the problem.
Can anyone point me to where I can get the software? Thanks.
HP Pavilion dv6775us
Vista Home Advanced

Did you make a recovery disk set or usb recovery media?
If you did, then you are in luck because that is the software that can be used to reinstall the Recovery manager.
The downside is that you will have to do a factory image recovery to reinstall the software. A recovery is a destructive process, unlike a Windows stystem restore. A recovery will mean that you will needto save all of your data externally to avoid losing it and reinstall all of your programs after the recovery is complete.
Regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Installing - Imaging Devices / Bildverarbeitungsgeräte = SCANNER without Software?

Hi @all,
i need your help :)
i want to install an MFP Device without the vendor software and without the vendor utils.
i need a solution where i am able to install a device like in this steps
1.) install driver with dpinst
2.) install and configure a scanner with giving an ip-address
the result should be that i see in "device manager \ image devices" my scanner
i tried to scan the system with procmon and other tools but i dont find something to see what does this vendor tool f.e. hewlett packard, that it recorgnized which model and how to configure it...
help

Hi,
You must abide by that device instruction to install it. Windows doesn't know its structure, thus we cannot provide the professional solution.
Karen Hu
TechNet Community Support
Hi Karen,
i don't think so, cause every vendor must use the windows internal interfaces like api, wmi.... so i know this is the device class IMAGE f.e. but how is it possible that i can link the driver with the ipaddress of the device so that the device will show
as a "image device"?
Greetz

HP Software for the HP Pavillion dv6-6117dx (Need to recover system without Recovery Manager

So I installed Windows 8 but was forced to delete all partitions, then I installed Linux Mint 14 Nadia, now I'm back to Windows 8 and I want to get Windows 7 Home Premium back or Windows 7 Professional (Microsoft Downgrade Rights)
And I cannot download the software HP provides when you first setup the computer, but now I do not have HP Recovery Manager or Support Assistant so I need that to reinstall all the programs and get back to Windows 7 Home Premium. But I do not want to spend any money on it like spending $15 on 2 stupid recovery discs, what a rip off! Ok can someone help ASAP also Im on Windows 8 Professional
This question was solved.
View Solution.

If you did not burn your Recovery Disks using HP Recovery Manager before deleting all partitions there is no way to download the files now. Ordering Recovery Disks is best option.
If you can read the 25 character Microsoft Windows 7 license key attached to bottom of laptop , you can download a Windows 7 ISO file to burn to a DVD.It must be the same version that is listed on the Microsoft COA sticker. Windows 7 Home Premium
Link to the Windows 7 ISO file downloads:
http://www.mydigitallife.info/official-windows-7-sp1-iso-from-digital-river/
Get ImgBurn to burn the iso image to DVD using slow burn speed.
Or use the Windows 7 USB/DVD installation tool to convert the ISO file to a Windows installation on DVD or USB flash drive.
http://www.microsoftstore.com/store/msstore/html/pbPage.Help_Win7_usbdvd_dwnTool
Use the 25 character product key on the PC to activate the installation.
Next go to your support and driver page to install the drivers you need.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

My Ipd Nano 6th generation isn't recognized by my computer or iTunes. I've followed all the troubleshooters and have uninstalled and reinstalled iTunes numerous times. I've checked for legacy software under device manager but I keep getting error 10.

My Ipod Nano 6th generation is no longer recognized by iTunes & my computer. I did all troubleshooting steps. After checking for changes and reinstalling legacy software in device manager I keep getting an error 10 message (device can't start). My device is charging when I plug it in and is otherwise still functioning normally. Can anyone help me please?

Universal Serial Bus controllers
     Intel(R) ICH9 Family USB Universal Host Controller - 2934
     Intel(R) ICH9 Family USB Universal Host Controller - 2935
     Intel(R) ICH9 Family USB Universal Host Controller - 2936
     Intel(R) ICH9 Family USB Universal Host Controller - 2937
     Intel(R) ICH9 Family USB Universal Host Controller - 2938
     Intel(R) ICH9 Family USB Universal Host Controller - 2939
     Intel(R) ICH9 Family USB Universal Host Controller - 293A
     Intel(R) ICH9 Family USB Universal Host Controller - 293C
     USB Composite Device
     USB Root Hub
     USB Root Hub
     USB Root Hub
     USB Root Hub
     USB Root Hub
     USB Root Hub
     USB Root Hub
     USB Root Hub
I'm not sure if it charged when I hooked it up to my roommate's computer, but it definately didn't register either. If I put it on the dock it plays so the port is fine, but that still doesn't help me sync it to my computer.

Recovery Manager Software for HP Probook 440

Hi there,
I am looking to make a recovery disk for my window 8.1 pro. But i am missing recovery manager software? Is there any help? I have searched but i didn't get!!

Hi:
You can see if this W8.1 recovery manager software will work for your model.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-135303-1&cc=us&dlc=en&lc=en...
If not, when your notebook doesn't have the recovery manager software, you will have to order a set of recovery disks for your notebook from HP.
Contact them for the country you live in at the link below.
http://www8.hp.com/us/en/contact-hp/ww-contact-us.html

Recovery Manager Software

Hello,
My name is Adrian Danalache, and i own a HP G62 (Not sure if product number is relevant). It came with the OS Windows 7 Home Premium x64.
The problem at hand:
I have re-installed a different OS that i own and that is Windows 7 Professional x64, however i have not done a back-up to disks of the pre-installed OS that came with my laptop. The Recovery partition is still there thow and i want to know if it's still possible to back-up the Recovery drive to DvDs. Albeit i know i would need the Recovery Media software or something along those lines. I have tried a few software i found on the forums but there were some compatibility problems. So if there is any chance i can still make the Recovery disks a response and a link to a compatible Recovery Manager would be very much appreciated.

Hi,
Please check the following link:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c01867418
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Which software can i use for recovery management that will allow me to use DVD's instead of Flashdsk

which software can i use for recovery management that will allow me to use DVD's instead of Flashdisk? I find DVD's easier to use. i am using windows 10

As the other posters wrote in order to take a movie file and turn it into a DVD that can be played in standard DVD players you need a DVD authoring application. That you need a separate program to create the DVD is standard procedure and has been that way since the beginning. All Apple produce that can produce video files require an external authoring program. iMovie, iPhoto and Final Cut all do this.
One other thing I will comment on is your choice of output format. You will almost certainly be disappointed with the video quality of your finished DVD if you put a HD video on a SD DVD. Unless you plan to burn a bluray disk you will get a better quality video if you output as SD if you plan to burn to an SD disk.
regards

Webcam software, Imaging device, Hp recovery manager

Similar Messages

Maybe you are looking for