Webcam software was removed

Hi,
I have an HP Touchsmart 310-1124, A friend cleaned my system and removed my HP software programs..I can't find any program that will allow me to open my webcam. When I try to download CyberCam you cam, I keep getting an error message that reads: The process cannot continue because the (Microsoft Visual C++2005 Service Pack 1 Redistributable Package ATL Security Update (x86) install was unsuccessful. The installation will now abort. Help..I really would like to know how to reinstall my HP software as well...I can't even reset to manufact..settings...

Hi:
Try installing the Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package first.
http://www.microsoft.com/en-us/download/details.aspx?id=5638
Then try installing the Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package ATL Security Update directly from Microsoft, and then try reinstalling the Cyberlink YouCam software.
http://www.microsoft.com/en-us/download/details.aspx?id=14431

Similar Messages

How to remove preinstalled files of adobe photoshop from my mac mini so that i can install a new version of the same software.The previous version was removed using the app cleaner software.Could not continue installation bcoz of earlier files

How to remove preinstalled files of adobe photoshop from my mac mini so that i can install a new version of the same software.The previous version was removed using the app cleaner software.Could not continue installation of the new version because of the existance of files from the previous version.plz help

What "app cleaner software" ? I ask because installing Photoshop over a previous version has never been a problem. Perhaps your difficulty stems from another source, eg. "cleaner software" ?
If you look in your hard drive, at the root level there is a Library. In there is a folder called Application Support, and in that you will find a folder called Adobe. Files from your previous version are there.
However, I urge you to call Adobe support to make sure you are not doing anything that would mess up other Adobe applications.
http://www.adobe.com/support/connect/connecthostedsupport.html

HT1925 I was trying to make sure that all my Apple software was uninstalled, and I still can't remove C:\Program Files\iPod\. I went to the Task Manager and it is not listed in the Processes tab. What do I do now?

I was trying to make sure that all my Apple software was uninstalled, and I still can't remove C:\Program Files\iPod\. I went to the Task Manager and it is not listed in the Processes tab. What do I do now?

Are you looking for iPodService.exe?
Might be better to run services.msc from the run dialog and shut down the service polietly.
tt2

Is ther a way to speed up a Mac? Mine has gotten slower and slower over time. When memory comes close to full would that have an effect on performance? Is there a way to determine unused programs/software to remove and free space?

Is there a way to speed up a Mac (similar to de-fragging on a PC)? Mine has gotten slower and slower over time.
When memory/disc comes close to full would that have an effect on performance? How should I determine what programs/software to remove and free space?

Things You Can Do To Resolve Slow Downs
If your computer seems to be running slower here are some things you can do:
Start with visits to:     OS X Maintenance - MacAttorney;
                                  The X Lab: The X-FAQs;
                                  The Safe Mac » Mac Performance Guide;
                                  The Safe Mac » The myth of the dirty Mac;
                                  Mac maintenance Quick Assist.
Boot into Safe Mode then repair your hard drive and permissions:
Repair the Hard Drive and Permissions Pre-Lion
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
Repair the Hard Drive - Lion/Mountain Lion/Mavericks
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilites Menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD disk icon and click on the arrow button below.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
Restart your computer normally and see if this has helped any. Next do some maintenance:
For situations Disk Utility cannot handle the best third-party utility is Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible.
Note: Alsoft ships DW on a bootable DVD that will startup Macs running Snow Leopard or earlier. It cannot start Macs that came with Lion or later pre-installed, however, DW will work on those models.
Suggestions for OS X Maintenance
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced since Tiger. These utilities have limited or no functionality with Snow Leopard or later and should not be installed.
OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive.
Helpful Links Regarding Malware Protection
An excellent link to read is Tom Reed's Mac Malware Guide.
Also, visit The XLab FAQs and read Detecting and avoiding malware and spyware.
See these Apple articles:
          Mac OS X Snow Leopard and malware detection
          OS X Lion- Protect your Mac from malware
          OS X Mountain Lion- Protect your Mac from malware
          About file quarantine in OS X
If you require anti-virus protection I recommend using VirusBarrier Express 1.1.6 or Dr.Web Light both from the App Store. They're both free, and since they're from the App Store, they won't destabilize the system. (Thank you to Thomas Reed for these recommendations.)
Troubleshooting Applications
I recommend downloading a utility such as TinkerTool System, OnyX, Mavericks Cache Cleaner, or Cocktail that you can use for removing old log files and archives, clearing caches, etc. Corrupted cache, log, or temporary files can cause application or OS X crashes as well as kernel panics.
If you have Snow Leopard or Leopard, then for similar repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line. Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. Applejack does not work with Lion and later.
Basic Backup
For some people Time Machine will be more than adequate. Time Machine is part of OS X. There are two components:
1. A Time Machine preferences panel as part of System Preferences;
2. A Time Machine application located in the Applications folder. It is
    used to manage backups and to restore backups. Time Machine
    requires a backup drive that is at least twice the capacity of the
    drive being backed up.
Alternatively, get an external drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
1. Carbon Copy Cloner
2. Get Backup
3. Deja Vu
4. SuperDuper!
5. Synk Pro
6. Tri-Backup
Visit The XLab FAQs and read the FAQ on backup and restore. Also read How to Back Up and Restore Your Files. For help with using Time Machine visit Pondini's Time Machine FAQ for help with all things Time Machine.
Referenced software can be found at MacUpdate.
Additional Hints
Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity as free space.
Add more RAM. If your computer has less than 2 GBs of RAM and you are using OS X Leopard or later, then you can do with more RAM. Snow Leopard and Lion work much better with 4 GBs of RAM than their system minimums. The more concurrent applications you tend to use the more RAM you should have.
Always maintain at least 15 GBs or 10% of your hard drive's capacity as free space, whichever is greater. OS X is frequently accessing your hard drive, so providing adequate free space will keep things from slowing down.
Check for applications that may be hogging the CPU:
Pre-Mavericks
Open Activity Monitor in the Utilities folder. Select All Processes from the Processes dropdown menu. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.
Mavericks and later
Open Activity Monitor in the Utilities folder. Select All Processes from the View menu. Click on the CPU tab in the toolbar. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.
Often this problem occurs because of a corrupted cache or preferences file or an attempt to write to a corrupted log file.

It appears "save as" was removed in the creation of Yosemite. How can I save a spreadsheet as a new document and then change all the data

"save as" was removed in the creation of Yosemite (File > Save as) How can I save an existing spreadsheet so that I can modify the data, rename it , and save it as a new document?

rkaufmann87
To address the first part of your response; as unnecessary as it was; save as has not been gone for years!! It is predicated on the operating system in play on ones computer. The software that I was using as recent as six months ago had a "Save as" option in the menu bar. Further, as you may have noted in "babowa's response it is clear that it still exists to this day in apple's most recent software "Yosemite 10.10.2. This appears to be true whether talking about numbers or pages (apps.) Oh, and by the way I am employing the most recent versions offered by Apple! Your car may be five years old but I am sure you still find it very useful. Case and point; it's not gone!!!

No Webcam software on my All-In-One

Hi I purchased a customizable all-in-one machine a couple of years back. The model # is HP Omni 200 5480 quad. It has a webcam built into the monitor. However, there is no webcam software to adjust the brightness, contrast, and so on. When I called HP, they told me it was because the machine was custom built. I'm not sure I understand the reasoning there but I need to download the appropriate software so I can adjust my webcam settings. Please send me the link to download the software.
Thank you!

Hi,
Since it's a CTO machine, very hard to know which one is on your machine. Please try the following software:
ftp://ftp.hp.com/pub/softpaq/sp45501-46000/sp45692.exe
Good luck.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Switch 2 was removed from stack unexpectedly and again joined stack

Hello,
we have 2 switches in stack, last night switch 2 was removed from stack and got rebooted and again it got back in stack.
Switch -2 entered into the provisioned mode for certain span of time. snap shot is attached .
Apr 9 02:36:25.266 IST: %STACKMGR-4-STACK_LINK_CHANGE: Stack Port 1 Switch 1 has changed to state DOWN
Apr 9 02:36:25.837 IST: %STACKMGR-4-SWITCH_REMOVED: Switch 2 has been REMOVED from the stack
Apr 9 02:36:27.850 IST: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/1, changed state to down
Apr 9 02:36:27.850 IST: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/3, changed state to down
Apr 9 02:36:27.850 IST: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/4, changed state to down
Apr 9 02:36:27.850 IST: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/5, changed state to down
Apr 9 02:36:28.857 IST: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/1, changed state to down
Apr 9 02:36:28.857 IST: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/3, changed state to down
Apr 9 02:36:28.857 IST: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/4, changed state to down
Apr 9 02:36:28.857 IST: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/5, changed state to down
Apr 9 02:48:37.111 IST: %STACKMGR-4-STACK_LINK_CHANGE: Stack Port 1 Switch 1 has changed to state UP
Apr 9 02:49:08.048 IST: %STACKMGR-4-SWITCH_ADDED: Switch 2 has been ADDED to the stack
Apr 9 02:49:20.170 IST: %STACKMGR-5-SWITCH_READY: Switch 2 is READY
Apr 9 02:49:20.170 IST: %STACKMGR-4-STACK_LINK_CHANGE: Stack Port 1 Switch 2 has changed to state DOWN
Apr 9 02:49:20.170 IST: %STACKMGR-4-STACK_LINK_CHANGE: Stack Port 2 Switch 2 has changed to state UP
*Mar 1 00:01:02.738: %STACKMGR-4-SWITCH_ADDED: Switch 1 has been ADDED to the stack (Switch-2)
*Mar 1 00:01:02.738: %STACKMGR-4-SWITCH_ADDED: Switch 2 has been ADDED to the stack (Switch-2)
*Mar 1 00:01:07.024: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled for type vlan (Switch-2)
*Apr 9 02:49:18.979 IST: %SYS-6-CLOCKUPDATE: System clock has been updated from 21:19:18 UTC Wed Apr 8 2015 to 02:49:18 IST Thu Apr 9 2015, configured from console by console. (Cochin-GMSC-SWTCH-2)
*Apr 9 02:49:19.382 IST: %SYS-5-CONFIG_I: Configured from memory by console (Cochin-GMSC-SWTCH-2)
*Apr 9 02:49:19.482 IST: %STACKMGR-5-SWITCH_READY: Switch 1 is READY (Cochin-GMSC-SWTCH-2)
*Apr 9 02:49:19.818 IST: %STACKMGR-5-MASTER_READY: Master Switch 1 is READY (Cochin-GMSC-SWTCH-2)
*Apr 9 02:49:20.053 IST: %STACKMGR-5-SWITCH_READY: Switch 2 is READY (Cochin-GMSC-SWTCH-2)
*Apr 9 02:49:20.178 IST: %LINEPROTO-5-UPDOWN: Line protocol on Interface Loopback99, changed state to up (Cochin-GMSC-SWTCH-2)
*Apr 9 02:49:20.178 IST: %LINEPROTO-5-UPDOWN: Line protocol on Interface Loopback999, changed state to up (Cochin-GMSC-SWTCH-2)
*Apr 9 02:49:20.321 IST: %SYS-5-RESTART: System restarted -- (Cochin-GMSC-SWTCH-2)
Cisco IOS Software, C3750E Software (C3750E-UNIVERSALK9-M), Version 12.2(44)SE2, RELEASE SOFTWARE (fc2) (Cochin-GMSC-SWTCH-2)
Copyright (c) 1986-2008 by Cisco Systems, Inc. (Cochin-GMSC-SWTCH-2)
Compiled Thu 01-May-08 15:00 by antonino (Cochin-GMSC-SWTCH-2)
Apr 9 02:49:24.222 IST: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/1, changed state to up
Apr 9 02:49:24.264 IST: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/3, changed state to up
Apr 9 02:49:24.281 IST: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/4, changed state to up
Apr 9 02:49:24.314 IST: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/5, changed state to up
Apr 9 02:49:25.228 IST: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/1, changed state to up
Apr 9 02:49:25.270 IST: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/3, changed state to up
Apr 9 02:49:25.287 IST: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/4, changed state to up
Apr 9 02:49:25.321 IST: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/5, changed state to up
Apr 9 02:49:39.959 IST: %PLATFORM-6-MODULE_INSERTED: TwinGig Converter module inserted in slot 1 in Switch 2 (Cochin-GMSC-SWTCH-2)
Apr 9 02:49:42.106 IST: %PLATFORM-6-MODULE_INSERTED: TwinGig Converter module inserted in slot 2 in Switch 2 (Cochin-GMSC-SWTCH-2)
Switch 02
Switch Uptime : 5 hours, 38 minutes
Base ethernet MAC Address : 00:23:04:19:9A:00
Motherboard assembly number : 73-10313-11
Motherboard serial number : FDO12320AH4
Model revision number : A0
Motherboard revision number : A0
Model number : WS-C3750E-24TD-SD
Daughterboard assembly number : 800-28590-01
Daughterboard serial number : FDO123305QU
System serial number : FDO1234V07K
Top assembly part number : 800-28443-01
Top assembly revision number : A0
Version ID : V01
CLEI Code Number : COMVC00ARA
Cisco IOS Software, C3750E Software (C3750E-UNIVERSALK9-M), Version 12.2(44)SE2, RELEASE SOFTWARE (fc2)
Copyright (c) 1986-2008 by Cisco Systems, Inc.
Compiled Thu 01-May-08 15:00 by antonino
Image text-base: 0x00003000, data-base: 0x02000000
Please help to find reason behind this unexpected reboot.
Regards
Jatinder

what is use of session 2 command ,is this service impacting command
sh ver
Cisco IOS Software, C3750E Software (C3750E-UNIVERSALK9-M), Version 12.2(44)SE2, RELEASE SOFTWARE (fc2)
Copyright (c) 1986-2008 by Cisco Systems, Inc.
Compiled Thu 01-May-08 15:00 by antonino
Image text-base: 0x00003000, data-base: 0x02000000
ROM: Bootstrap program is C3750E boot loader
BOOTLDR: C3750E Boot Loader (C3750E-HBOOT-M) Version 12.2(35r)SE1, RELEASE SOFTWARE (fc2)
******* uptime is 11 weeks, 2 days, 8 hours, 40 minutes
System returned to ROM by power-on
System restarted at 01:41:48 IST Wed Jan 21 2015
System image file is "flash:c3750e-universalk9-mz.122-44.SE2/c3750e-universalk9-mz.122-44.SE2.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
License Level: ipbase
License Type: Permanent
Next reload license Level: ipbase
cisco WS-C3750E-24TD (PowerPC405) processor (revision A0) with 0K/16376K bytes of memory.
Processor board ID FDO1234V07J
Last reset from power-on
3 Virtual Ethernet interfaces
1 FastEthernet interface
56 Gigabit Ethernet interfaces
4 Ten Gigabit Ethernet interfaces
The password-recovery mechanism is enabled.
512K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address : 00:22:BE:95:35:80
Motherboard assembly number : 73-10313-11
Motherboard serial number : FDO12340H8F
Model revision number : A0
Motherboard revision number : A0
Model number : WS-C3750E-24TD-SD
Daughterboard assembly number : 800-28590-01
Daughterboard serial number : FDO123305LA
System serial number : FDO1234V07J
Top Assembly Part Number : 800-28443-01
Top Assembly Revision Number : A0
Version ID : V01
CLEI Code Number : COMVC00ARA
Hardware Board Revision Number : 0x01
Switch Ports Model SW Version SW Image
* 1 30 WS-C3750E-24TD 12.2(44)SE2 C3750E-UNIVERSALK9-M
2 30 WS-C3750E-24TD 12.2(44)SE2 C3750E-UNIVERSALK9-M
Switch 02
Switch Uptime : 1 day, 7 hours, 35 minutes
Base ethernet MAC Address : 00:23:04:19:9A:00
Motherboard assembly number : 73-10313-11
Motherboard serial number : FDO12320AH4
Model revision number : A0
Motherboard revision number : A0
Model number : WS-C3750E-24TD-SD
Daughterboard assembly number : 800-28590-01
Daughterboard serial number : FDO123305QU
System serial number : FDO1234V07K
Top assembly part number : 800-28443-01
Top assembly revision number : A0
Version ID : V01
CLEI Code Number : COMVC00ARA
License Level : ipbase
License Type : Permanent
Next reboot licensing Level : ipbase
Configuration register is 0xF

Looking for DELL Webcam Central software and the webcam software updates

My laptop is DELL XPSM1530. I read that the webcam was made by Creative Technology.
Recently, I read in DELL.com that there is a software named DELL Webcam Central.
It was said that it can improve the camera performance.
I have looked for it in DELL.com but I did not found it and I also have looked it here but I got nothing.
Where can I get it? Is it the same as Webcam Manager / Webcam Central that has been installed in my laptop here?
And if it the same, where can I have the software updates?
Thank you.

Hi,
You will stand a better chance getting in touch with Dell, the download site here does not offer the mentioned webcam software.

My MacBook died and my hard drive was removed, are my existing files only compatible with Apple products?

My MacBook died and my hard drive was removed, are my existing files only compatible with Apple products? Are the files encrypted with Apple OS or am I able to import my files to Microsoft programs?

The drive as a whole can’t be read on a PC without installing software such as MacDrive on it.
The answer varies for individual document files; some file formats can be read by Windows software, while others can't.
(111559)

Need webcam software for MINI 110-3138 tu

My HP webcam software has been removed from my 110-3180 TU. Do you have a free download to allow me to use the webcam?
Thank you
Martin

Hi:
See if this software will work for you...
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-117932-1&cc=us&dlc=en&lc=en...

I have an older iMAC that once burned CD's with no issues. Now I get an error message saying "The attempt to burn a disc failed. The device is not accessible, probably because it was removed". I have never had it touched so the device was not removed.Help

I have an olde iMac that once I have an older iMAC that once burned CD's with no issues. Now I get an error message saying "The attempt to burn a disc failed. The device is not accessible, probably because it was removed". I have never had it touched so the device was not removed. Please advise as to what could be the problem. How to fix. Thanks

Try resetting the SMC and PRAM first, if that doesn't help try a cleaning disc.....and then buy an inexpensive external burner. Slimline super drive failures are all too common.
To reset the SMC
Shut down the computer.
Unplug the computer's power cord.
Wait fifteen seconds.
Attach the computer's power cord.
Wait five seconds, then press the power button to turn on the computer.
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

Issues with Creative Cloud/Flash Professional? (Performed system restore, Flash was removed...)

I had done a system restore to restore my computer the way it was 24 hours ago to fix some PC issues (couldn't uninstall some programs that I was going to reinstall to fix performance issues); I have three other Adobe programs of my computer that are still there, but where Flash was my most recent acquisition, it was removed when I performed the system restore. When I tried to re-download the program, CC still thinks Flash is still on my computer; I have uninstalled and reinstalled CC, gone through the program files for traces of Flash (didn't delete or alter anything, but also didn't find anything pertaining to Flash), deleted the Temp folder, attempted to download Flash Professional CC directly from the CC website, but none of these made any changes. Is there any way to manually download Flash, or "reset" CC to get it to notice Flash isn't on my computer anymore?

It still didn't help - it removed CC from my computer, and I reinstalled it, but I've already tried that. It still says Flash Professional CC is still there (I installed Flash CS6, too, as a substitute in the meantime, but I still need Flash CC). Flash Professional CC isn't on my computer anymore - it was deleted in a system restore, but CC says it's still there, so I can't reinstall it. Is there a direct download I can use?

I cannot get the updates for ipad to download. when it gets ready to process the file an error message pops up saying the software was unable to download and the network timed out. any suggestions...

i am trying to update the software on my ipad from 4.2 to 4.3.3 but i cannot get it to download. I get an error message that says the software was unable to download because the network timed out. I have tried to download it 7 or 8 different times and still get the same message. I cannot restore the factory settings either. The same thing happens. Does anyone have any suggestions? It did this when trying to update to 4.2. I don't remember how we were able to get the software to update. Thanks.

Thank you King_Penguin! It worked beautifully. I had turned the firewalls off but not the antivirus. You are great! I am new to this apple community thing so it looks like I cannot mark your reply as "correct answers", but it was. Thanks a ton!

I updated to 6. In Tools, blocked cookies and now can never open Firefox. The allow cookies window is stuck. How do I get rid of the firefox browser and go back to 5. I did have malware on computer that was removed, but still ...not working

On Saturday, Sept. 3, I updated to Mozilla Firefox 6. I went into the Toolbar, I think to private browsing, but not sure now. I asked that all cookies be blocked. A window came up from my home page that said "Allow, Allow this session only, Deny Cookies." I said Deny and it told me 19 cookies were being blocked. I have never been able to get the window to leave the browser home page. In fact, I can not make any choice in that window. The window kind of shakes. I went for professional help and did have malware that I had not known was there that was removed. Technician worked 3 hours. It was called "PUM.Hijack.Start." The Mozilla browser is still stuck like that. I am on Internet Explorer, but I would like to have Firefox back again. What steps do I take next?

I am having a similar problem. Running Xp.
Latest revision of firefox.
After using firefox for a while if I exit, parent.lock is locked and i have to reboot to reload firefox.
I have killed all firefox applications from task manager (usually there are none). and I have tried 3 different "file unlock" programs including unlocker to no avail.
I also recently installed a program that shows -all- open files, and parent.lock is not listed, and thus not closable/unlockable from there.

HT6114 My Mac Book Pro had a split drive with Windows Microsoft Access on it and it was removed when Mavericks installed. I need this so how can I go back to the old system?

My Mac Book Pro had a split drive with Windows Microsoft Access on it and it was removed when Mavericks installed. I need this so how can I go back to the old system?

Restore from the backup you had prior to installing Mavericks.
However, the upgrade should not have altered your partition scheme. Did your erase and format the drive prior to upgrading?

Webcam software was removed

Similar Messages

Maybe you are looking for