Webcam wont work on new comp

Ok so, i bought a webcam about 2 years ago (i had a really old comp then, Windows 1998)
Anyway, it worked perfectly with that pc, yet when i had a new comp (Windows Xp) my cam doesn't work with this comp, all that happens on any program (have tried loads of cam software programs), is that the screen is like fuzzy and black
why doesnt my cam work with this computor? this computor being quicker than my old one?
cheers

This is a hardware / installation issue, nothing to do with JMF.
If you don't have the webcam installation cd, then look on the manufacturers website for the drivers & software.
Get it running with the standard software first, before attempting anything with JMF.
regards,
Owen

Similar Messages

  • My webcam wont work

    i got my hard drive replaced and my webcam isnt working on the internet only offline.
    how do i get it to work on the internet????

    i got my hard drive replaced and my webcam isnt working on the internet only offline.
    how do i get it to work on the internet????

  • Old raid aray wont work on new a64

    plz  help! on trying to get my old pata raid aray to work i come across the first problem the comp sees the drives but wont boot from them !
    i go through to set up raid and it asks to initialise it ? will it format my full drives?
    what is the full procedure to get them up and running?
    the old aray ran from 2 drives on separate cables (channels) into the mobo
    on the a64 there is only 1 (channel) a cable with 2 connections
    what am i doing wrong?

    This is a hardware / installation issue, nothing to do with JMF.
    If you don't have the webcam installation cd, then look on the manufacturers website for the drivers & software.
    Get it running with the standard software first, before attempting anything with JMF.
    regards,
    Owen

  • Hp g60 webcam wont work help me!

    I have an HP computor and i have had it for years, but my webcam has stopped working, if i try to Skype with someone it says no webcam found or it says i dont have a webcam plugged in, i have tried the cyberlink stuff and the youcam and it hasn't worked. When i get to the install wizard, it says its installed the opens a green screen that i cant exit, after like 15 seconds it says cant load (skudll.tll ) HELP PLEASE!

    Hello @animepotato ,
    Welcome to the HP Forums! By the way, I like anime and love potatoes
    To address your webcam issue, I will require the following information:
    1. The computer's model number. If you require assistance locating this information, please reference this website: Guide to finding your notebook product number
    2. The computer's operating system. If you require assistance locating this information, please reference this website to determine your Windows operating system.
    3. Does this occur on certain programs, or all programs?
    4. Have you installed any new software or drivers on this computer, before the issue appeared?
    5. Have you tried another webcam?
    Additionally, if the issue just began occurring, I would perform a system restore. I want you to bring the computer back to the earliest restore point possible, in an attempt to dodge whatever caused the issue. Here is a document on how to perform a System Restore: System Restore
    Please let me know. In the meantime, I'm going to watch anime and eat potatoes
    Mario
    I worked on behalf of HP.

  • Iwork 06 not working with new comp (says I never purchased it, lies!)

    -this question was suggested to be moved from appleworks to this forum-
    So I recently purchased a Macbook Pro. The gentleman at the apple store suggested I move over my hard drive from my old comp to my new one using a firewire cable. Which worked great. But when I tried to open my iworks ('06) it stated that my 30 day trial was over and that I had to purchase one now. I purchased the iworks as a bundle with my old comp but now it says its a trial version instead now?
    I have no desire to shell out the money needed to purchase this product that I already do own.
    Suggestions please as to how I remedy this situation.

    If you have not entered the serial number in iWork on the new Mac, it does not "know" you purchased it. It is not lying. How would it know?
    If you still have access to the old computer, you can open one of the iWork applications as fruhulda suggested & write down the serial number, or you can copy the com.apple.iWork.plist from HD > Library > Preferences to the same location on your new Mac. This is the main Library at the root level of your hard drive.

  • My Built-In Webcam wont work

    My webcam is built-in and it said i need to install webcam in my laptop. when I looked at Device Manager there was no Display area for my Webcam. But i did find  Cyberlink webcam is Sound, vedio and game controllers area. My webcam won't work and i already look for online solutions and did not help either. Please help me.
    my product is 
    HP 15-f033wm Notebook PC (ENERGY STAR)

    update your driver HP 15-f033wm Notebook PC (ENERGY STAR)
    link:
    http://support.hp.com/us-en/drivers/selfservice/HP-15-Notebook-PC-series/7137590/model/7605334#Z7_30...
    Wisnu Suryandi

  • Satellite L450D Webcam not working after new installation without recovery

    Hi there,
    as posted in the thread title I have a problem with the integrated webcam of a customer notebook. Two days ago the operating system of this laptop was damaged by a virus and needed to be re-installed. I tried to install it with the recovery partition, which did not work. After it I tried to re-built it with the dvd I burned from the recovery partition with the same result.
    The only thing that worked was a clean install with a windows 7 64 Bit retail dvd and the key printed on the sticker of the laptop. I managed to get everything working again except one part - the webcam.
    No driver installation, bios update and re-installation worked to get this part to work.
    Did anyone of you know this problem and have a fix for me?
    Thanks in advance.
    Greetings Saphire
    P.S.: One thing shall be also important. When I look into the installed devices manager the driver for the webcam is listed as usb webcam and the manufaturer of it is Microsoft.

    Hi
    I dont think that this needs to be fixed because I dont think its hardware related issue.
    I think there is something wrong with the software on your notebook.
    I mean everything worked perfectly until virus has damage the OS. Right?
    You said this:
    >I tried to install it with the recovery partition, which did not work. After it I tried to re-built it with the dvd I burned from the recovery partition with the same result.
    I really wonder why you could not get this working using Recovery disk.
    So possibly this is the key to this issue
    On the Toshiba European driver page I could find Registry Patch v1.1 For Win 7 64bit
    Also webcam driver v 1.1.1.4 is available there
    I think the OS is responsible for your issue possibly some patches are applied or similar

  • ITunes wont work since new computer

    I had iTunes on my old computer and I just got a new computer and downloaded iTunes. I logged into iTunes but none of my songs are showing up, and I'm scared that if i plug my iPod into the computer that all of my songs will dissapear. Is there anyone who can tell me how to get my songs back without deleting all of them off of my iPod?

    Your iTunes songs will be on the old computers hard drive, so you'll need to transfer them over to the new computer. You can plug your iPod into your new computer, it wont delete the tunes on it, but I dont think you can swap them from your iPod to iTunes very easily.
    Look at these two threads which are related to transfering the files from ipod to itunes.
    http://discussions.apple.com/thread.jspa?messageID=3386821&#3386821
    http://discussions.apple.com/thread.jspa?messageID=1510817&#1510817

  • My external webcam wont work in IE10 but works fine on chrome

    The only clue I've got is that on testmycam in IE10 the external webcam FPS rate is -1 (and the screen is blank) and the same site in Chrome the same cam FPS rate is 30 (and it's working ok)

    IE uses ActiveX plugin for Flash, Chrome (and all other browsers) use a different plugin for Flash. You should right-click on the Flash object in IE and verify that it has permission to use the camera and any other relevant settings.

  • HOME SHARING wont work on new ipad

    just bought a brand new ipad 2 16gb straight from the apple store and i cant seem to setup home sharing. ive enabled it on my mac under advanced, and my settings on the ipad and im using the same username and wifi. i just cant seem to find the shared library in music on my ipad. any help? all of the troubleshooting guides online are showing me the answer but the shared library simply isnt there.

    http://macvalley.blogspot.com/2012/03/sharing-your-itunes-library-with-your.html
    this link has a pic of what it should be like but the shared library wont come up? all my software is up to date also. please help

  • Will the Alphasmart work on new comps?

    In case your wondering, this is what I'm referring to. And yes I can see that is works for macs, but does that apply to the new computers out now?

    You have posted this query in the forum for old old old apple computers.  Instead you should post it in the forum for the new computer you want to connect the Alphasmart to, e.g
    https://discussions.apple.com/community/notebooks
    But I it's not that likely you will find people here who have used this device, so you are more likely to get useful info from the reviews at Amazon or other stores that sell it.

  • Webcam wont work on chatroulette

    not only on chatroulette also on other sites, either it is black or does´t work, its since i updated yesterday
    thanks
    kris

    This is a hardware / installation issue, nothing to do with JMF.
    If you don't have the webcam installation cd, then look on the manufacturers website for the drivers & software.
    Get it running with the standard software first, before attempting anything with JMF.
    regards,
    Owen

  • My trackpad features wont work on new macbook pro.

    Features such as pinch zoom and 4 finger swip down on track pad to minimize an app, do not work on my Macbook Pro which was purchased brand new in late August.  These features haven't worked since I purchased the laptop.

    If everything is set up correctly in System Preferences > Trackpad make an appointment at the Genius Bar.
    Or contact Apple.

  • Webcam not working on new Pavilion dm1

    The integrated HP Webcam 50 has worked twice since I've had my notebook.  There's no rhyme nor reason why it works.  I've checked device manager and it's not showing under imaging devices or anywhere else, except when it works. I bought a cheap logitech webcam and that works fine.  I've read every imaginable blog on this problem and it seems to be a perennial problem but I have yet to find an answer.  I don't believe it's a driver problem and since it's worked twice the hardware must also be fine.  It looks more like some sort of conflict with Windows 7 but I'm not really sure.  Does anyone have an answer? 

    Hi Ralph,
    What is your product number and operating system? 
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • HT5654 tap it the simpsons     wont work with new download

    i loaded the new 7.1 on my ipone new the simson game wont work

    Only the Carrier that the phone is locked to can Unlock it...
    You need to Contact the Carrier ( Vodaphone in this case ) and ask if they Offer this Service and if you Qualify...

Maybe you are looking for

  • Restrict a t.code VK11 using Site as authorization object

    Hi all, We want to restrict VK11 t.code using Site as one of the authorizations. By default it has only Sales Org, Distr channel and division. I've added one more field for "Site" manually. We have defined specific values for Site in authorization ob

  • Currency EUR replaced by hash sign (#)

    Hello everybody, I have a SAPscript for vendor payment advice and one of the column is the currency of the amount (often EUR). When the form is printed, the 'EUR' is correctly displayed. but when the form is transformed into pdf to be sent per mail o

  • Passing message text from external RFC server into SAP EXCEPTION parameter

    In function module CREDIT_CARD_SETTLEMENT the following DYNAMIC function module call exists: ------ Send items for settlement to a RFC function -------------------     CALL FUNCTION l_fnset          DESTINATION l_rfcset          EXPORTING   i_ccseth 

  • Triggering a mail for a Particular payload

    Dear Friends,           I am doing a file to file scenario beween the same system.   My requirement is that if the payload of the file has flag value as 'S' i should put it in output folder in the ftp. But if the flag is 'E' then i should trigger a m

  • Sharing Primary Site and Secondary Site's SUP WSUS for non-SCCM client use

    I was wondering if the WSUS deployed for the SCCM's SUP can also be (re)used for non-SCCM clients. Our SCCM infrastructure are mainly used to manage Workstations whereas our back-end servers are not deployed with SCCM agents due to overlapping SLAs a