Webcam works...but then they cant hear me...turn o...

 sorry gang...checked thru the questions and coodnt find any relevant...
 wen I make a video call...I can see me and the other person...but they cant hear me...wen I click off the camera icon at bottom of screen they can hear me...wat up woth that...is there a setting I have wrong????
     Thanx

If restoring as new (without using a backup) doesn't help, there is a hardware problem.  Take it to Apple or whoever provides iPhone warranty service in your country.

Similar Messages

  • When i make a call i can hear perwson on other end but they cant hear me,i works breifly if i turn phone on

    I can hear the person on the other end but they cant hear me,sometimes i works sometimes it does not,any ideas?

    Try this
    Updated tests here: https://discussions.apple.com/thread/5136434

  • When I make a call I can hear the person I call but they cant hear me. But when I put my phone onto loud speaker they can hear me then ?

    Hi I have recently had a problem with my Iphone 5. When I make a call to someone I can hear them fine but they cant hear me unless I turn it to loud speaker then they can hear me, I can still talk to siri and on face time but not for a normal call. What would be making this happen ???

    Hi Kel134,
    Welcome to the Apple Support Communities!
    I understand that you are having microphone issues on your iPhone when you place a call to someone and they cannot hear you unless you activate the speaker function. In this situation I would recommend the steps in the following article to help isolate and resolve the situation. 
    iPhone: Microphone issues
    http://support.apple.com/kb/ts5183
    Resolve the issue
    Follow these steps, testing after each.
    Make sure nothing is plugged in to the jack connector.
    Make sure nothing is blocking any of the microphones (refer to the pictures below to find your device's microphones). Check for these:
    Dirt or debris
    A screen protector or case
    When you're holding your phone next to your ear, make sure you don't block the microphone with your fingers or shoulder and make sure to speak into the microphone
    Turn the iPhone off and then on.
    Update to the latest version of iOS.
    If necessary, find general iPhone hardware troubleshooting suggestions.
    For further assistance, contact Apple Support.
    I hope this helps,   
    -Joe

  • No outbound sound on skype i can hear them but they cant hear me

    I have a satellite l505-s6946 laptop ,skype will only let me hear them they cant hear me ,windows 7

    Hi and Welcome to the Community!
    Anytime random strange behavior or sluggishness shows up, the first thing to try is a proper reboot:
    Pre-BB10 Devices ONLY. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes.
    BB10 Devices. Hold the top button down until the counter reaches zero. Wait for the device to be fully shut down (e.g., nothing at all displayed on the screen, no LED lights, etc.). Hold the top button until the red LED is lit. Wait through the full boot-up process. If this fails and your model has a removable battery, then you can attempt the battery-pull method above, but it is normally NOT recommended unless nothing else works. If your model does not have a removable battery, substitute holding the up/down arrow keys until the device fully shuts down.
    See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Im 6 days late on my warrinty and I had no clue I was. And now when I call people and when they call me they cant hear me, but I can hear them.

    Im 6 days late on my warrinty and I had no clue I was. And now when I call people and when they call me they cant hear me, but I can hear them.

    Apple Store Genius makes all decisions regarding implementation of Warranty Coverage. Maybe you have AppleCare coverage and don't even know. If the Genius decides to cover under Warranty then it was worth taking to Apple. If Genius decides no Warranty, then replacement iPhone 4 is $149.

  • When making calls why they cant hear me but i can hear them?

    When making calls why they cant hear me but i can hear them?

    good question. try to record a voice memo on your phone. if you can't hear yourself, it means likely that your mic isn't working, which would explain why no one can hear you on the phone

  • Hi when i playback videos on my phone, i cant hear the sound ....also when i call someone or when i get a call i cant put it on speaker mode because i can hear them but they cant hear me

    hi when i playback videos on my phone, i cant hear the sound ....also when i call someone or when i get a call i cant put it on speaker mode because i can hear them but they cant hear me

    Basic troubleshooting steps clearly outlined in the User Guide are restart, reset, restore from backup, restore as new device.
    If you have been through ALL of the troubleshooting steps and you're still having problems, then you'll need to bring your phone to Apple for investigation.

  • They cant hear me , but i can record anything

    when i call someone they cant hear me, even if they call me they cant hear me
    when i do restore and make my Iphone4 as new it works for one call only then the issue back again and they cant hear me even by using the speaker!!
    plz help me
    my iphone is up to date .

    If restoring as new (without using a backup) doesn't help, there is a hardware problem.  Take it to Apple or whoever provides iPhone warranty service in your country.

  • I cannot install Itunes 10.5.3 properly on my W7 64bits...it works but then i can't synchronize my ipad..they ask me to install Itunes 64bits...

    ...it works but then i can't synchronize my ipad..they ask me to install Itunes 64bits...
    I uninstal, instal, uninstal all apple software, instal itunes again...after 10 times, it still doesnt work...
    any advices ?

    It won't pass 10.3.
    What does this mean?
    I figured it out. Thanks!!!
    What did you figure out? How about posting how you resolved it?

  • I came into the store because my middle button was not working. Then they gave me a middle button that's on the screen of my phone. I got a new phone do now my middle button doesn't work but I still have the internal digital button, how do I remove it?

    I came into the store because my middle button was not working. Then they gave me a middle button that's on the screen of my phone. I got a new phone do now my middle button doesn't work but I still have the internal digital button, how do I remove it?

    Settings>General>Accessibility>(scroll down to)AssitiveTouch and change to Off

  • I can hear caller but they cant hear me

    Hi
    When I receive a call on my iphone 4s i can hear the caller but they cant hear me.
    When I call the caller back there are no problems.

    i dont want to use the earphone with a mic though, i want to be able to receive and to make calls without the earphone with a mic. but my problem is, there is no sound at all coming from the speakers that you put near your ear when your calling

  • I can hear ring tone but upon answer i cant hear anyone and they cant hear me

    i can hear ring tone but upon answer i cant hear anyone and they cant hear me

    Hi bigmart1,
    It sounds like you are experiencing an issue with your receiver speaker on your iPhone. Here is a link for you that will help you address this issue:
    If you can't hear a person on a call or voicemail or if the sound quality is poor on iPhone - Apple Support
    https://support.apple.com/en-ca/HT203800
    Thanks for coming to the Apple Support Communities!
    Regards,
    Braden

  • I have an iphone 4s, when i make a call i can hear them but they cant hear me so i have to put it on loud speaker

    i have an iphone 4s, when i make a call i can hear them but they cant hear me so i have to put it on loud speaker

    Hi gallimore1998,
    It sounds like you may be having an issue with one of the microphones on your iPhone. Here is an article that will help you address this:
    iPhone: Microphone issues
    http://support.apple.com/kb/ts5183
    Thanks for coming to the Apple Support Communities!
    Cheers,
    Braden

  • I phone 4 when face timing i can hear people but they cant hear me

    i phone 4 when face timing i can hear people but they cant hear me. help

    Having similar problem here only the other way around. The people on the other end of the phone can hear me but I get no sound at all. I can communicate if I plug in the earphones or put the caller on loud speaker. When this fault is occurring I also lose most sounds from my phone. Instead of getting an incoming message noise it only vibrates. I also lose all keypad and lock etc sounds. This problem comes and goes and is truly annoying. The phone is still under warranty but it will be an inconvenience trying to have this problem rectified. It would be interesting to know if it is a hardware problem or another problem created by the upgrade to this os system to 4.1. Either way it is a problem that Apple need to look at urgently as it appears to be fairly wide spread from my research on these boards. I suggest everyone who is having this problem also reports it via the feedback page on the apple site
    Message was edited by: Shemax

  • My iPhone 3G can make calls and i can hear them but they cant hear me......

    I just got my iPhone 3G yesterday and when I make calls, that person can talk to me and I can hear them, but when I talk they cant hear me. It has nothing to do with the mute button though. But if I use the headset or a bluetooth device I can talk to that person. How can I Use the phone itself without a headset or bluetooth. HELP ME PLEASEEEE!

    Sorry to bump a really old thread, I'm a bit behind the times considering I just got my iPhone on Monday so please excuse...
    I'm having the same exact problem with my new iPhone but I bought mine at an AT&T store, can I still take it to the Genius bar to be replaced?
    I dread going to the AT&T store like no other, but all of the LA and OC area Apple stores had been out of the 8g iPhone for days and I couldn't wait any longer to get one. I'm hoping this doesn't mean I have to take it there...
    Thanks in advance

Maybe you are looking for

  • ASA and Cisco VPN question

    I am having an issue on a new ASA. I am able to connect to the customer?s network using the Cisco VPN client, but I am not able to PING or access anything on the customers network. What needs to be done to fix this??? There is a route on the customer

  • In MIGO Sec cess Field hidden in Excise item Tab

    Hi Experts, We have a problem when we post excisable migo, Sec Cess Field is hidden. But BED and ECS field is clearly visible. What should we do. Resulting when we want to change SECESS we can not change it. Please help what should we do. GR.

  • WRT54G Disconnects and REQUIRES a Power on Reset

    My WRT54G disconnects once per day and requires a power on reset to get it back on line. It's version 6 with the most recent firmware. After a wonderful chat session with Linksys this AM and then a subsequent email to Support, I've received NO satisf

  • Oraclebarcode.jar Doesn't work on webserver

    Oraclebarcode.jar Doesn't work on webserver I have downloaded the example on how to print a barcode using the oraclebarcode.jar in 9i. It works on my local install of the reportserver(devloper9i), but when I move it out to the webserver(9ias), it doe

  • HPLaserJetP1102w will not print since download of Mavericks

    The printer is wired to the iMac and worked fine with Mountain Lion.  I was able to "print" a cleaner page so the cable is connected,  The message states that the printer is not connected.