Webcasts open automatically in player not embedded in browser

I am trying to view http://www.billabongpro.com/jbay09/live.php and the webcast opens in a seprate quicktime player.
I have IE at work and the webcast plays in the browser.
How do i change some setting so the webcast plays in the browser?
Thanks

To view this you need Flip4Mac component. If you don't have it here the download link:
http://dynamic.telestream.net/downloads/download-flip4macwmv.html
After you install flip4Mac go to your system preference and click on the flip4Mac icon. Under the plug-in tab you can set Quicktime to either open a video in the browser or in the Quicktime Player.
I have my flip4MAc to open in the browser . So, when the video started in the browser I click on the save triangle (far right) in the player and saved the feed to my desktop.
reflector-52282.asx
Clicking on the above .asx open the feed in the Quicktime player.

Similar Messages

Quicktime movies open in new player, not embedded in IE browser.

I'm not sure if this is something new to Vista, but I'm having trouble getting .mpeg and .mov files to open in the Internet Explorer window. Instead, when I click links to movies, it opens a stand-alone quicktime player window and plays it there.
Is this a setting I'm missing somewhere?

To view this you need Flip4Mac component. If you don't have it here the download link:
http://dynamic.telestream.net/downloads/download-flip4macwmv.html
After you install flip4Mac go to your system preference and click on the flip4Mac icon. Under the plug-in tab you can set Quicktime to either open a video in the browser or in the Quicktime Player.
I have my flip4MAc to open in the browser . So, when the video started in the browser I click on the save triangle (far right) in the player and saved the feed to my desktop.
reflector-52282.asx
Clicking on the above .asx open the feed in the Quicktime player.

Address Book Opens Automatically and will not close (even with Force Quit)

The address book automatically opens at times and I cannot close it. Even with a force quit, I cannot close it. It takes up over 80% of CPU cycles when it opens automatically. Any thoughts or suggestions?
Thanks
Robby

This is happening to me too. Has occurred on MBP 17" about six or seven times over the past couple of weeks. Have not been able to replicate it. But recently suspect that it may be related to auto syncing and/or syncing my iPhone 3G.
Anyone else have an idea?

Play movies in QT Player, NOT in the browser!

How do I get the QT-movies to play in QT Player instead of the browser? Can I specify this in the HTML-code?
My webhotel is wyning about high bandwith usage. Is there any way to avoid high bandwith usage? I have three QT-movies at 3MB each.
What about a nice JavaScript that pops up the movies in a small window (320x196px)? Anyone know what to do?
//Joseph

You don't need to use a frame from the movie and any size image will work when your target is the QuickTime Player.
It's only when the target is the browser window that you need to match the dimensions of the linked file (HREF) to the poster movie.
Try this little trick to increase your dimensions without increasing the file size:
Open your target movie using QT Pro. Change the Movie Property dimensions to double size and use Save As.
Name this new doube size file identical to your current version and upload it to the same location. Click OK to replace the older.
You could also use the "Presentation" feature to play it double size.
More bang for your buck and bandwidth use is still very low.

Getting media to open in Quicktime Player, not inside the Firefox window

I have this strange issue where any media files want to open inside Firefox with the QT plugin, regardless of what I have selected for the MIME settings in the Quicktime preference pane.
I mainly want the m3u files to open in the separate QT player, because it's annoying that when I preview music in eMusic Firefox loads it up in a new page and I have to click Back to get back to the album's page, and I have to wait until the preview has finished otherwise it stops.
I've tried in Safari, and it works fine. eMusic's m3u files open up in QT instead as I want. It seems to be just Firefox that's not recognizing my QT preferences. I've tried quitting and reopening Firefox to no avail. At least I can work around it by opening the preview links in tabs.

"there's no option to add stuff to
the list."
Yes there is!
Click on the "View & Edit
Actions" button.
The next window that opens up, scroll to whatever
plug-in you want to change-Quicktime Plug-in.
Click the "Change Action" button.
The problem is, I don't see an option for m3u files in the list. The only things that show up for me are MP4, PNG, TIFF, XLS, RM, and EMP.
And as I mentioned, I do not see an "Add" or "+" button anywhere to manually add M3U to the list. The only buttons are remove and change. Perhaps that's something that's just missing in my copy (I'm using version 1.5.0.7, BTW). Perhaps my installation got hosed somehow. Maybe I'll try re-downloading and reinstalling it.
PowerMac G5 Dual 1.8 Mac OS X (10.4.8) 5G iPod 60GB

Reg key to set PDF opening in Reader and not the web browser

Is there a reg key which would apply to all users/computer (not just current user, Hkey_user) to set a variable that would open PDF's in the actual Adobe Reader program and not in a web browser.
I only find references to reg key's that apply to the current users logged in, but unfortunately I work in an education facility and we use Dynamic user id's which creates a new user each time in windows, and then removes the profile on logout
Thanks in advance,

Would you suggest downloading the Adobe Customization Wizard and creating an MST file to distribute the app? If so, do you have documentation on where to change this setting?

Context-sensitive WebHelp topics opening in new tab not window per browser default

hello everyone. i am generating WebHelp using Robohelp 7. the developer i am working with is new to WebHelp but got the idea pretty quick. i generated a map and he set up the help link to call the correct topic from the application.
at first he could not figure out how to display the navigation pane by default. but then we identified Windows > New Window in the Project Set-up pod and when i changed this from One Pane View to Two Pane View and regenerated the nav pane started coming up.
the problem now is that despite my having unchecked the Use Default Browser Settings, WebHelp opens according to whatever is configured in the browser for "new window" links. for example in Firefox if Options > Tabs > Open new windows in a new tab instead is selected, WebHelp opens in a new tab. same deal in IE.
if anyone can tell me how to ensure that WebHelp always opens in a new window when the context-sensitive link is used i would very much appreciate it. i used Robohelp extensively some time ago but it has been a while and some of this stuff is not coming back to me.
thanks
rcb

Hi there
I'm thinking that if you really want a new window, you will need to resort to some custom JavaScripting. By default, things are probably dependent upon the browser settings.
If you are insistent on having a new window, I might suggest looking at how NetFlix does their popups. They are very pesky and seemingly impossible to turn off!
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

Open Adobe Reader and not Acrobat in browser

I just installed the now freelaý available Adobe Acrobat Pro 7 and in my browers PDF files are now opened in that one.
But I intend to use it only for editing PDFs. Since it is not the newest version, I would for security reasons prefer to have Adobe Reader open PDFs in my browsers, since it will always be the newest version.
How can I keep Acrobat and still have the Reader open the files?
A plugin or some setting?

It IS now freely available FROM ADOBE: http://www.adobe.com/downloads/cs2_downloads/ , with serial number and all! And it was activated by Adobe after I installed it! No crack, no hack... (At least this is available in Europe, maybe not in the US?.)
But plesae advice how I can make Reader (latest version) open in the browser instead of Acrobat. There will surely be a way, such as, maybe, a change in the Registry,
In the Reader, there is an option Edit > Preferences > Internet, but it now points to Acrobat...
In Acrobat there is a similar option where I can mark "Display PDF in browser". It makes no difference if I mark or unmark it.
Normally, the Reader should have this option, too, but it has now been hijacked by Acrobat.
There must be a way, please tell me...

Real Player not working

Hello everyone,
I'm trying to access the videos at http://www.learnerstv.com, however I keep getting the following message from the embedded Real Player:
"A component needed to play this content is not available.
Real Player may be able to download the missing component."
At which point the prompt asks me if I would like to try opening the file in Real Player (not embedded in the web page, rather the actual program on my computer), if I select "Try in Real Player" then Real Player opens and says:
"Some needed components were not available."
And of course there are no components showing in the window, none available.
I've viewed the "Technical Help" section of the site and I do have the latest version of Real Player, I have Flash player and Shockwave installed as well. Interesting enough though, it does work for some videos, such as:
http://www.learnerstv.com/video/video.php?video=36&cat=Physics (first video in series)
but not for:
http://www.learnerstv.com/video/video.php?video=37&cat=Physics (second video in series)
All the videos work however when I run them on Windows through VMware Fusion. I don't have any firewall/security protection running either.
Does anybody have any ideas on this?

Real Player, much like Windows Media, has pretty much abandoned the Mac platform. They still make a version (WM has a QT plugin that doesn't always work either). A lot of playback ability depends on the codec use and/or the kind of DRM baked into the video. Some of it requires Windows, which is why it works the PCs version but not the Mac.
If you can get it to work via Fusion, but not native on the Mac it would seem to be one of these compatibility issues. Your choice is basically to either use Fusion/Parallels or a regular PC or not use the video at all.
As for Firewall, don't worry the built-in firewall in XP is OK. There is also some good basic free anti-virus s/w. Check out AVG or Avast. Both offer free versions.

How do I stop programs opening automatically when i log onto my macbook?

When I log onto my macbook, about 6 programs open automatically. they are not listed on my 'Login Items' and I dont know how to stop them popping up.
Any help would be appreciated!!

You do not clarify which email client you are using
For Mac's mail the only way I know for more control is the Mail AttachmentTamer a easy and free to use plug-in
http://lokiware.info/Attachment-Tamer

After mistakenly clicking a link, my safari does not open automatically and unexpected webs open up.

I am using MacBook Air with Yosemite OS. After mistakenly clicking a link, my safari does not open automatically and unexpected webs open up. Could you please give me suggestions on how to fix this problem? Thank you

That's a bit vague, but you may have installed the "VSearch" trojan. Remove it as follows.
Malware is always changing to get around the defenses against it. These instructions are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data before proceeding.
Step 1
From the Safari menu bar, select
          Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including any that have the word "Spigot," "Trovi," or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
Reset the home page and default search engine in all the browsers, if it was changed.
Step 2
Triple-click anywhere in the line below on this page to select it:
/Library/LaunchAgents/com.vsearch.agent.plist
Right-click or control-click the line and select
          Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "com.vsearch.agent.plist" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchDaemons/com.vsearch.daemon.plist
/Library/LaunchDaemons/com.vsearch.helper.plist
Restart the computer and empty the Trash. Then delete the following items in the same way:
/Library/Application Support/VSearch
/System/Library/Frameworks/VSearch.framework
~/Library/Internet Plug-Ins/ConduitNPAPIPlugin.plugin
Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
The problem may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
This trojan is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow. Never install any software that you downloaded from a bittorrent, or that was downloaded by someone else from an unknown source.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Then, still in System Preferences, open the App Store or Software Update pane and check the box marked
          Install system data files and security updates
if it's not already checked.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

HT4972 i connect my iphone to my pc and i tunes open automatically,then i press dowload and update but itunes say am not connected to the internet while my pc is connected to the internet what isi the problem?

i connect my iphone to my pc and i tunes open automatically,then i press dowload and update but itunes say am not connected to the internet while my pc is connected to the internet what isi the problem?

If you are the only user on your computer you probably don't have multiple user accounts set up and can disregard that. If you are using iTunes 11 go to View>Show Sidebar. Now see if your iPad appears under Devices on the left side when you connect it. If it does, click on the name of your iPad on the left side and your iTunes sync settings options will appear in folders with tabbed headings to the right.
If it doesn't appear on the left side, follow the troubleshooting steps shown in this article: http://support.apple.com/kb/TS1538.

How do i get iphoto to NOT open automatically when i plug in my devices for updating in iTunes ??

How do i get iphoto to NOT open automatically when i plug in my devices for updating in iTunes ??

Just so i understand. It happens when i connect my Ipad or Iphone, which i want to stop. I'm cool with it opening when I connect my camera tho. Can i customize it that way (just to open for my camera, and NOT my i-devices) ?
thx for the help

How do i make a tab active and make it stay that way always. If i put a website in my home page in order for the tabs to open automatically in that same homepage , this setting is not working, every time I open a tab , a white window appears .

How do i make a tab active and make it stay that way always. If i put a website in my home page in order for the tabs to open automatically in that same homepage , this setting is not working, every time I open a tab , the window appears white .

By default Firefox opens a blank page for a new Tab, there is no setting to change that action without installing an add-on.
New Tab Homepage extension: <br />
https://addons.mozilla.org/en-US/firefox/addon/777

Raw Files from LR do not open automatically in Photoshop raw processor

I like to edit my images in Photoshop. Could you please advise why after I upload raw files into LR and using photoshop as external editor, the file opens but not in the PS (photoshop) raw processor. I have to work around this by first finding the image in windows explorer and dragging this file into PS. Shouldn’t the file open automatically in the PS raw processor ?

Are you using Photo > Edit in Photoshop (or Ctrl/Cmd+E)?
Are you getting any error messages? Does Photoshop open at all?
Marek
Marek Mularczyk
Adobe Certified Expert and Instructor
Adobe Photoshop Lightroom 1, 2, 3
Adobe Photoshop CS3, CS4, CS5
Adobe Dreamweaver CS3, CS4, CS5
Adobe Flash CS3, CS4, CS5

Webcasts open automatically in player not embedded in browser

Similar Messages

Maybe you are looking for