Webcenter 11.1.1.1.4 installation. Pre-req UCM.

Hello,
on oracle download page http://www.oracle.com/technetwork/middleware/webcenter/downloads/index.html
we can see that the UCM is now required for installing the WebCenter. However, I couldn't find any documentation from oracle saying that. I just found that in this download page.
What components should we install from UCM? Should we create a domain to UCM or just extend the wc domain?
I have this kinds of doubts...
Please, could someone guide me through this?
Thanks in advance,
Jonas Zanon

In fact, UCM is not realy required. If you don't plan on using the document services than you don't need to install UCM.
You can read my post about installing webcenter from scratch: http://www.yonaweb.be/installing_webcenter_11g_ps3_scratch
This described all the needed steps to install and start webcenter with all the required services. Optional services like UCM are not installed in this post so you can see what is required.
If you plan on using UCM with webcenter, than you can first install webcenter and then install UCM. If you already have created a webcenter domain than you can easily extend the webcenter domain.

Similar Messages

Oracle Service Bus Pre-Req

Hi,
Is SOA 11g installation Pre-req for OSB 11g on top of Weblogic 10.3.3. As per OSB 10gR3 we could install OSB with out SOA installation on Weblogic 10gR3.
Thanks,
NL

Hi
the soa installation isn't a prereq for the osb installation
at minimum you just need the wls installation.

Warning while running pre-req checks for installing 11g binaries

I am trying to install 11g binaries on my box for upgrading my production db from 10.2.0.4 to 11.1.0.7. I have dev and Prod running from the same box. I already upgraded my dev instance to 11g and its home is /opt/oracle/product/11.10/dev.
I created another path for production as /opt/oracle/product/11.1.0/prod so that I can install the 11g binaries for production in there. When I run the installer, the pre-req checks gives me two warnings -
Checking PATH environment variable...
Check complete. The overall result of this check is: Failed <<<<
Problem: The installer has detected that the PATH environment variable includes other ORACLE_HOME locations in it.
Recommendation: Restart the installer after removing other ORACLE_HOME locations from PATH environment variable.
========================================================
Checking LD_LIBRARY_PATH environment variable...
Check complete. The overall result of this check is: Failed <<<<
Problem: The installer has detected that environment variable LD_LIBRARY_PATH includes other ORACLE_HOME locations in it.
Recommendation: Restart the installer after removing other ORACLE_HOME locations from LD_LIBRARY_PATH environment variable.
I ran ther pre-req again after unsetting the PATH and HOME variable. But it still gives me a warning on the PATH variable. What should I do to avoid this warning?

If I were you, I would have defined the HOMEs as "/opt/oracle/product/dev/11.1.0" and "/opt/oracle/product/prod/11.1.0" - that would eliminate the errors you are facing. It is still not too late - you can install the prod binaries as "/opt/oracle/product/prod/11.1.0", then later on "clone" the OH from "/opt/oracle/product/11.1.0/dev" to "/opt/oracle/product/dev/11.1.0" and delete the former.
You could also simply clone "/opt/oracle/product/prod/11.1.0" from "/opt/oracle/product/11.1.0/dev" rather than running the the install/patching process all over again.
HTH
Srini

Pre req for 11.5.9

Hi All,
Any kindly provide me the exact metalink id for pre req for 11.5.9 application in windows server
Thanks,
Rajesh P

Oracle Applications 11.5.9 Installation Update Notes for MS Windows - B10848-01 [ID 234782.1]
11.5.9 Installing Oracle Applications
http://docs.oracle.com/cd/B12190_11/current/acrobat/r1159ins.pdf
May I know what's the reason...IMPORTANT REMINDER: 11.5.9 Severity 1 Production Error Correction Support Ends June 30, 2011 [ID 1331433.1]
Lifetime Support Policy: Oracle Applications
http://www.oracle.com/us/support/library/lifetime-support-applications-069216.pdf
Thanks,
Hussein

MASTER LEGISLATIVE HRGLOBAL PRE-REQ LIST doesn't have R12.HR_PF.B.1

Hi Friends,
I am using R12.1.1 with HRMS Patch level : R12.HR_PF.B.1 (which is R12.HR_PF.B.delta1 i believe)
I would like to apply Singapore Legislation so when i look at the MASTER LEGISLATIVE HRGLOBAL PRE-REQ LIST (Latest Oracle HRMS Legislative Data Patch Available (HR Global / hrglobal) [ID 145837.1])
I couldn't see either R12.1.1 (or) R12.HR_PF.B.1 and i could see only the later versions (R12.1.2,R12.1.3,R12.HR_PF.B.delta2,R12.HR_PF.B.delta3,R12.HR_PF.B.delta4,R12.HR_PF.B.delta5)
so do this mean i don't need to apply any Pre-Req patches for my current release/HRMS level and I can proceed with Data Install and apply hrgobal.drv?
Please confirm.
Regards,
DB

839396 wrote:
Hi Friends,
I am using R12.1.1 with HRMS Patch level : R12.HR_PF.B.1 (which is R12.HR_PF.B.delta1 i believe)
I would like to apply Singapore Legislation so when i look at the MASTER LEGISLATIVE HRGLOBAL PRE-REQ LIST (Latest Oracle HRMS Legislative Data Patch Available (HR Global / hrglobal) [ID 145837.1])
I couldn't see either R12.1.1 (or) R12.HR_PF.B.1 and i could see only the later versions (R12.1.2,R12.1.3,R12.HR_PF.B.delta2,R12.HR_PF.B.delta3,R12.HR_PF.B.delta4,R12.HR_PF.B.delta5)
so do this mean i don't need to apply any Pre-Req patches for my current release/HRMS level and I can proceed with Data Install and apply hrgobal.drv?
Please confirm.
Regards,
DBHi,
yes, you are right. this is because R12.1.1 comes with the installation. And you can not apply any pre-req before installing R12.1.1
All the patches listed in the table for pre-req are for the RUP patches which you will apply later. For example before applying RUP3 for HR you will apply 12757980 as a pre-req for Singapore.
Thanks

Problems installing AIA 2.5 Foundation Pack pre-reqs on SOA 10g

I am involved in a very large AIA project. I am creating my own environment prior to go to the customer and I have found some issues while installing the pre-reqs for the Foundation Pack on top of Oracle SOA Suite 10.1.3.4 (MLR #8) using OC4J.
I am following the attached doc, in specific these lines:
Oracle SOA Suite 10 g Release 3 (10.1.3.4 + MLR#8 or later). Use Advanced Installation option and select J2EE, the web server, and Oracle SOA Suite.
This version of AIA is tested and certified on 10.1.3.4 MLR#8 (Patch 8372150). You need to apply these additional patches over MLR#8:
* 5507491
* 7692665
* 8533397
Note: Before you apply patch 8533397, perfrom the following tasks.
1. Download OUI 10.1.0.6.0 (patch 6640838) and install it on the Oracle home with all components listed on screen.
2. Download latest 10.1 Opatch (Patch 6880880) and install it on the Oracle home.
* 8644645
I was able to install MLR#8, and then 5507491,7692665. I also did the pre-reqs for 8533397. But when trying to install 8533397, I got the following:
==================================================
D:\>opatch version
Oracle Interim Patch Installer version 1.0.0.0.63
Copyright (c) 2009 Oracle Corporation. All Rights Reserved..
Oracle recommends you to use the latest OPatch version
and read the OPatch documentation available in the OPatch/docs
directory for usage. For information about the latest OPatch and
other support-related issues, refer to document ID 293369.1
available on My Oracle Support (https://myoraclesupport.oracle.com)
OPatch Version: 1.0.0.0.63
OPatch returns with error code = 0
==========================
So, the Opatch is with the latest version. Then I ran:
=============================
D:\8533397>opatch apply
Oracle Interim Patch Installer version 1.0.0.0.63
Copyright (c) 2009 Oracle Corporation. All Rights Reserved..
Oracle recommends you to use the latest OPatch version
and read the OPatch documentation available in the OPatch/docs
directory for usage. For information about the latest OPatch and
other support-related issues, refer to document ID 293369.1
available on My Oracle Support (https://myoraclesupport.oracle.com)
Oracle Home : d:\oracle\soasuite
Oracle Home Inventory : D:\oracle\soasuite\inventory
Central Inventory : C:\Program Files\oracle\inventory
from : N/A
OUI location : D:\oracle\soasuite\oui
OUI shared library : D:\oracle\soasuite\oui\lib\win32\oraInstaller.dll
Java location : "D:\oracle\soasuite\jre\1.4.2\bin\java.exe"
Log file location : d:\oracle\soasuite/.patch_storage/<patch ID>/*.log
Creating log file "D:\oracle\soasuite\.patch_storage\8533397\Apply_8533397_03-31
-2010_07-48-33.log"
OPATCH_JAVA_ERROR=CheckConflict: OPatch cannot process overlay patches because o
f no OUI support. Please take latest OUI 10.1 patchset from "My Oracle Support"
and try again.
Cannot check bug/file conflict and component prerequisite checks.
ERROR: OPatch failed during prerequisite check.
OPatch returns with error code = 150
=====================
I've been trying to install the patch, but it seems OPatch is having some issues with the overlay patches and that is why is throwing that error. I also tried to do it with previous Opatch releases (52 and 62), but I got similar errors.
Do u have any suggestions?? Is there anything I can do to install those two patches (8533397 & 8644645).
In my research I noticed that the OPatch is either not being updated correctly, or simply not able to use the overlay patches, and that is why is saying that I need a most updated one. But for an Oracle DB 10.1 system, the latest OPatch version I found was 1.0.0.0.63.
Any suggestions are welcomed,
thx again
best
*..::WaLeX::..*

Hi Walter:
how r u?
Basically the issue is related when u apply patch 6640838 to upgrade OUI. If u don't do the following, u get into the error u described in ur post:
1. Before u install patch #6640838 , u need to be sure to rename the OPatch directory under $ORACLE_HOME. Once u do that, u can proceed with the application of patch 6640838.
2. Then after applying it u can download patch 6880880, in order to have the latest OPatch version (1.0.0.0.63). In this step, u just need to unzip it, and u will have a new OPatch directory under $ORACLE_HOME
3. After that, u can go and do an "opatch apply" for patches 8533397 and 8644645.
And that's it, u will get rid of that messy problem.
I ran into the same issue, but just realized the step that was causing all the problem.
Hope this helps.
best
rolando

Problems installing AIA 2.5 Foundation Pack pre-reqs

I am involved in a very large AIA project. I am creating my own environment prior to go to the customer and I have found some issues while installing the pre-reqs for the Foundation Pack on top of Oracle SOA Suite 10.1.3.4 (MLR #8) using OC4J.
I am following the attached doc, in specific these lines:
Oracle SOA Suite 10 g Release 3 (10.1.3.4 + MLR#8 or later). Use Advanced Installation option and select J2EE, the web server, and Oracle SOA Suite.
This version of AIA is tested and certified on 10.1.3.4 MLR#8 (Patch 8372150). You need to apply these additional patches over MLR#8:
* 5507491
* 7692665
* 8533397
Note: Before you apply patch 8533397, perfrom the following tasks.
1. Download OUI 10.1.0.6.0 (patch 6640838) and install it on the Oracle home with all components listed on screen.
2. Download latest 10.1 Opatch (Patch 6880880) and install it on the Oracle home.
* 8644645
I was able to install MLR#8, and then 5507491,7692665. I also did the pre-reqs for 8533397. But when trying to install 8533397, I got the following:
+==================================================+
D:\>opatch version
Oracle Interim Patch Installer version 1.0.0.0.63
Copyright (c) 2009 Oracle Corporation. All Rights Reserved..
Oracle recommends you to use the latest OPatch version
and read the OPatch documentation available in the OPatch/docs
directory for usage. For information about the latest OPatch and
other support-related issues, refer to document ID 293369.1
available on My Oracle Support (https://myoraclesupport.oracle.com)
OPatch Version: 1.0.0.0.63
OPatch returns with error code = 0
+==========================+
So, the Opatch is with the latest version. Then I ran:
+=============================+
D:\8533397>opatch apply
Oracle Interim Patch Installer version 1.0.0.0.63
Copyright (c) 2009 Oracle Corporation. All Rights Reserved..
Oracle recommends you to use the latest OPatch version
and read the OPatch documentation available in the OPatch/docs
directory for usage. For information about the latest OPatch and
other support-related issues, refer to document ID 293369.1
available on My Oracle Support (https://myoraclesupport.oracle.com)
Oracle Home           : d:\oracle\soasuite
Oracle Home Inventory : D:\oracle\soasuite\inventory
Central Inventory     : C:\Program Files\oracle\inventory
from               : N/A
OUI location          : D:\oracle\soasuite\oui
OUI shared library    : D:\oracle\soasuite\oui\lib\win32\oraInstaller.dll
Java location         : "D:\oracle\soasuite\jre\1.4.2\bin\java.exe"
Log file location     : d:\oracle\soasuite/.patch_storage/<patch ID>/*.log
Creating log file "D:\oracle\soasuite\.patch_storage\8533397\Apply_8533397_03-31
-2010_07-48-33.log"
OPATCH_JAVA_ERROR=CheckConflict: OPatch cannot process overlay patches because o
f no OUI support. Please take latest OUI 10.1 patchset from "My Oracle Support"
and try again.
Cannot check bug/file conflict and component prerequisite checks.
ERROR: OPatch failed during prerequisite check.
OPatch returns with error code = 150
+=====================+
I've been trying to install the patch, but it seems OPatch is having some issues with the overlay patches and that is why is throwing that error. I also tried to do it with previous Opatch releases (52 and 62), but I got similar errors.
Do u have any suggestions?? Is there anything I can do to install those two patches (8533397 & 8644645).
In my research I noticed that the OPatch is either not being updated correctly, or simply not able to use the overlay patches, and that is why is saying that I need a most updated one. But for an Oracle DB 10.1 system, the latest OPatch version I found was 1.0.0.0.63.
Any suggestions are welcomed,
thx again
best
*..::WaLeX::..*

Use higher versions of OUI Installer and OPatch - 10.2 or above

JAEHYLEE (R11i AOL) Adpatch fails with Pre-req check

Goal
이미 적용한 patch를 Adpatch가 다시또 Pre-req로 재차 확인을 요청하는 경우가 발생할 경우
Cause
adpatch는 AD_SNAPSHOT_BUGFIXES table의 bugfix_id에 record를 가지고 있어여 하나 여기에 데이타가 없는 경우에 prereq check를 잘못할수 있다
fix:
adadmin을 사용하여 Maintain snapshot information을 수행을 권고 드립니다.
Perform the steps :
adadmin : Maintain Applications Files --> Maintain snapshot information
--> Manage Snapshots within this Application System.
You must run AD Administration "Maintain snapshot information" once
for each APPL_TOP before you can apply any patch that contains a "
compatible feature prereq" line on that APPL_TOP. Running AD
Administration "Maintain snapshot information" for an APPL_TOP
completely populates the APPL_TOP's current view snapshot. This complete
information is required for the automatic prerequisite patch checking feature
to give correct results.
Reference
245362.1

Hi,
Please run the following command to check the Exchange server in your organization:
Get-ExchangeServer
Check whether there is any legacy Exchange server listed. We can double confirm the Excahnge server in the following path:
1. In ADSI Edit, navigate to Configuration >
CN=Configuration,CN=<domain> > CN=Services >
CN=Microsoft Exchange > CN=<Exchange organization name> >
CN=Address Lists Container > CN=Recipient Update Services.
2. In the result pane, right-click Recipient Update Service (Enterprise Configuration), click
Delete, and then click Yes to confirm the deletion.
3. Uninstall Exchange 2003 by using Add or Remove Programs from
Control Panel.
If there is no Exchange 2003 in your organization, please collect any error logs in Event Viewer for further troubleshooting.
Regards,
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Winnie Liang
TechNet Community Support

What are the pre reqs to learn XI

Hi..
Can any one suggest me what all the pre req's that i need to learn so that i can learn XI. I am new to this field, so can any one suggest me how to start?
thank you.
kishore karnati

Kishore
If you know basic concepts of Java, ABAP and XML it would be a added advantage to learn and understand XI very quickly.
As you may XI is SAP's middleware solution, providing integration capabilities for SAP and non-SAP solutions alike. It is becoming increasingly important in any SAP implementation, mostly because it makes integration to SAP systems easy to implement. Also, SAP's newer solutions like SRM and MDM use XI's capabilities natively.
SO if you are interested in working with XI, that is agood thing. It is quite different from EP though, because EP is very user and front-end oriented, whereas a good XI implementation is invisible to the end-users.
An certification is a good thing to have, and XI is no different. But as in any other SAP solution, the certification is no substitute for hands-on experience on XI... which is what you must get as soon as you can.
new sap xi
NEW TO xi
When you have xi system practice this simple scenarios for starters:
Following are the links to weblogs which will help to develop the basic scenarios.
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters - IDoc to File
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy - ABAP Proxy to File
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30 - File to JDBC
/people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy - File to ABAP Proxy
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1 - File to File Part 1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2 - File to File Part 2
/people/ravikumar.allampallam/blog/2005/06/24/convert-any-flat-file-to-any-idoc-java-mapping - Any flat file to any Idoc
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit - File to RFC
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] - File to Mail
/people/jayakrishnan.nair/blog/2005/06/20/dynamic-file-name-using-xi-30-sp12-part--i - Dynamic File Name Part 1
/people/jayakrishnan.nair/blog/2005/06/28/dynamic-file-namexslt-mapping-with-java-enhancement-using-xi-30-sp12-part-ii - Dynamic File Name Part 2
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address - Dynamic Mail Address
/people/siva.maranani/blog/2005/05/25/understanding-message-flow-in-xi - Message Flow in XI
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm - Walk through BPM
/people/siva.maranani/blog/2005/05/22/schedule-your-bpm - Schedule BPM
/people/sriram.vasudevan3/blog/2005/01/11/demonstrating-use-of-synchronous-asynchronous-bridge-to-integrate-synchronous-and-asynchronous-systems-using-ccbpm-in-sap-xi - Use of Synch - Asynch bridge in ccBPM
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] - Use of Synch - Asynch bridge in ccBPM
/people/michal.krawczyk2/blog/2005/08/22/xi-maintain-rfc-destinations-centrally - Maintain RFC destination centrally
/people/sravya.talanki2/blog/2005/08/18/triggering-e-mails-to-shared-folders-of-sap-is-u - Triggering Email from folder
/people/sravya.talanki2/blog/2005/08/17/outbound-idocs--work-around-using-party - Handling different partners for IDoc
/people/siva.maranani/blog/2005/08/27/modeling-integration-scenario146s-in-xi - Modeling Integration Scenario in XI
/people/michal.krawczyk2/blog/2005/08/25/xi-sending-a-message-without-the-use-of-an-adapter-not-possible - Testing of integration process
/people/michal.krawczyk2/blog/2005/05/25/xi-how-to-add-authorizations-to-repository-objects - Authorization in XI
http://help.sap.com/saphelp_nw04/helpdata/en/58/d22940cbf2195de10000000a1550b0/content.htm - Authorization in XI
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step - Alert Configuration
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide - Trouble shoot alert config
/people/sameer.shadab/blog/2005/09/21/executing-unix-shell-script-using-operating-system-command-in-xi - Call UNIX Shell Script
/people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi - Transport in XI
/people/r.eijpe/blog/2005/11/04/using-abap-xslt-extensions-for-xi-mapping - Using ABAP XSLT Extensions for XI Mapping
/people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure - Mail Adaptor options
/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm - Collection of IDoc to Single File
/people/sap.user72/blog/2005/11/17/xi-controlling-access-to-sensitive-interfaces - Controlling access to Sensitive Interfaces
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14 - The same filename from a sender to a receiver file adapter - SP14
/people/prasad.illapani/blog/2005/11/14/payload-based-message-search-in-xi30-using-trex-engine - Payload Based Message Search in XI30 using Trex Engine
/people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i - XI : Configuring CCMS Monitoring for XI- Part I
/people/michal.krawczyk2/blog/2005/11/23/xi-html-e-mails-from-the-receiver-mail-adapter - XI: HTML e-mails from the receiver mail adapter
/people/sap.user72/blog/2005/11/22/xi-faqs-provided-by-sap-updated - XI : FAQ's Provided by SAP
---Satish

Deploying IE10 with pre-reqs

Hello,
I am attempting to deploy IE10 and its pre-reqs but don't appear to be able to get the client to evaluate that it needs it. On the client in the UpdatesDeployment.log I can see that the update is processed, but doesn't do anything else.
Raising client SDK event for class CCM_SoftwareUpdate, instance CCM_SoftwareUpdate.UpdateID="Site_07BE0050-1DAB-4F0B-BE99-524582FE38AF/SUM_87e13ecb-c669-43be-9e2a-01e567285031", actionType 12l, value NULL, user NULL, session 4294967295l, level
0l, verbosity 30l
Update (Site_07BE0050-1DAB-4F0B-BE99-524582FE38AF/SUM_87e13ecb-c669-43be-9e2a-01e567285031) added to the targeted list of deployment ({0D676272-8326-4E44-9BC9-AED88E69C953})
I also see the following:
EnumerateUpdates for action (UpdateActionInstall) - Total actionable updates = 0 UpdatesDeploymentAgent 3/31/2014 10:41:02 AM 4516 (0x11A4)
Assignment {4dedb6be-289a-4f3a-9142-219c5bc9b3dd} has total CI = 2 UpdatesDeploymentAgent 3/31/2014 10:42:49 AM 3504 (0x0DB0)
Also have some errors after a "Raising client SDK event"
Raising client SDK event for class CCM_SoftwareUpdate, instance CCM_SoftwareUpdate.UpdateID="Site_07BE0050-1DAB-4F0B-BE99-524582FE38AF/SUM_f2638b04-e9b6-442e-8cf0-59b3635e2eef", actionType 12l, value NULL, user NULL, session 4294967295l, level
0l, verbosity 30l
Raising client SDK event for class CCM_SoftwareUpdate, instance CCM_SoftwareUpdate.UpdateID="Site_07BE0050-1DAB-4F0B-BE99-524582FE38AF/SUM_5fe2b519-6b09-4f46-aaf2-3cb3f254bea7", actionType 12l, value NULL, user NULL, session 4294967295l, level
0l, verbosity 30l UpdatesDeploymentAgent 3/31/2014 10:42:49 AM 3504 (0x0DB0)
GetUpdate - failed to get targeted update, error = 0x87d00215. UpdatesDeploymentAgent 3/31/2014 10:42:49 AM 3136 (0x0C40)
GetUpdate failed, error 87d00215 UpdatesDeploymentAgent 3/31/2014 10:42:49 AM 3136 (0x0C40)
CCCMUpdatesDeployment::GetUpdate failed, error = 0x87d00215 UpdatesDeploymentAgent 3/31/2014 10:42:49 AM 2680 (0x0A78)
GetUpdate - failed to get targeted update, error = 0x87d00215. UpdatesDeploymentAgent 3/31/2014 10:42:49 AM 3136 (0x0C40)
GetUpdate failed, error 87d00215 UpdatesDeploymentAgent 3/31/2014 10:42:49 AM 3136 (0x0C40)
CCCMUpdatesDeployment::GetUpdate failed, error = 0x87d00215 UpdatesDeploymentAgent 3/31/2014 10:42:49 AM 2680 (0x0A78)
Unable to evaluate assignment {4dedb6be-289a-4f3a-9142-219c5bc9b3dd} as it is not activated yet UpdatesDeploymentAgent 3/31/2014 10:53:09 AM 3516 (0x0DBC)
Also in the WindowsUpdate.log I can see that the client is checking the correct site. I am also deploying KBs 2729094, 2670838, 2786081 and 2758857 as pre-reqs, but I cannot get SCCM to recognize 2670838 in the catalog even though it is in the WSUS catalog.
This client is able to retrieve other updates.

Hi,
0x87d00215 is "item not found".
I recommend you check the following log files:
LocationServices.log
ContentTransferManager.log
DataTransferServices.log.
For more infomation, please review the link below:
Technical Reference for Log Files in Configuration Manager
http://technet.microsoft.com/en-us/library/hh427342.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

SRKIM: Patch 적용시 pre-reqs 가 다 적용되었는데도 pre-req error 가 날때.

PURPOSE
Adpatch 작업 시 pre-req patches 가 모두 적용 되었음에도 불구하고 pre-req patch check error 가 날때의 대처 방법에 대해 알아본다.
Problem Description
Adpatch 작업 시 pre-req patches 가 모두 적용 되었음에도 불구하고 아래와 같은 error 가 발생한다.
Unapplied prerequisite patch.
This prerequisite patch must be applied before the current patch can be applied. Please apply it.
Workaround
N/A
Solution Description
adadmin 으로 'Maintain snapshot information' 작업을 수행 후 다시 patch 작업을 진행 하도록 한다.
Perform the steps :
adadmin : Maintain Applications Files --> Maintain snapshot information
--> Manage Snapshots within this Application System.
Reference Documents
Note. 245362.1 11i AOL : Adpatch fails with Pre-req check even if the Pre- req patch was applied

Pre req's for SAP MDM

Hi,
I am working on j2EE technologies for past 2 years and planning to move to SAP MDM. Will it be easy to move to MDM(i understand there will be a learning curve, but still!) or do I need to fulfill any pre req's to learn it. If so, what will be those?

Hi,
if you are planning to become a MDM technical Consultant, then your experience in J2EE will prove very helpful. you can easily explore and develop using Java API and web services.
If you have little bit of ABAP, XI and Enterprise Portal, that would be plus point. but it is not mandatory, you can learn MDM without having good knowledge of these.
Regards,
Shiv

SYCLO INSTALLATION PRE-REQUISITES and Procedure

Hello guys,
i am now starting a new mobility enhancement on SYCLO. Since i am new to SYCLO i googled some of its concepts and my primary concern is to configure Syclo in our Enterprise Landscape. so i want to know about the pre-requisites like :
1.what are the ADD-ONS need to be installed for syclo.
2-how Agentry mobile platform is integrated and built.
3-how Syclo's Agentry Editor is worked nested with Eclipse Development platform and installation procedure.
4- some more concepts on SMP 2.3.
so guys help me regarding on this SYCLO work-shop.
Thanks
ashish satapathy
Tags edited by: Michael Appleby

I am also new to syclo and so far i have come across these add-ons to be installed at ERP system.
SMFND 610_700
SMERP 610_700
Ref: Re: How to do app configuration in SAP ERP system for Agentry development
Regards,
Jitendra

Mcod installation pre-requisites

Dear All,
I am about to install MCOD system. ECC6.0 is already installed on the host,
Now It is needed to install CRM 5.0 on to the same host and same database oracle.
Could you please let me know what are the pre-requisites we take before i start the
CRM installation.
- Do we have any effect on to the existing env. variables because i have to start
installation from the same host -root user
- Do we need to take any special actions for the listener configuration?
- I got through from Inst guide , we need to increase the free space in SYSTEM tablespace
if you can provide any other pre-requisites, It will be greatful for me.
Thanks and Regards

> I am about to install MCOD system. ECC6.0 is already installed on the host,
> Now It is needed to install CRM 5.0 on to the same host and same database oracle.
Are you really SURE you want to do that? MCOD has more drawbacks that pro's.
- Database maintenance requires both systems (ERP + CRM) to be shut down
- system copies using backup/restore are always done for both systems (can be tricky)
- in case of a logical error you have to reset both systems (imagine that in your ERP!)
I would install a separate Oracle software and use a second ORACLE_HOME to separate both instances from each other. The only cost of that is local harddisk space for the Oracle software.
Markus

Oracle BI Installation Pre-requisites

Hi,
I am working on a fresh installation of the Oracle BI Components. I had a quick question in this regard - Do we need to install the Oracle Client s/w before installing the BI components?
Thanks.

If you install Oracle BI Applications you need a oracle client, because you want to install the DAC repository, informatica repository and datawarehouse tables as well, so you need database connectivity software
If you only install OBIEE you don't need a database. Everything of OBIEE is filebased.
However if you want to connect to an oracle database (because you want to query on that) then you need client software, but you can install this afterwarts as well...
succes,
Remc0

Webcenter 11.1.1.1.4 installation. Pre-req UCM.

Similar Messages

Maybe you are looking for