WebCenter and IE7

Hi!
Im having a strange problem with IE 7 and Webcenter/ADF
AF:SPACER dont work at all with IE7. Works perfect with 8.
Read an article woch said that this should be solved with PS3, but we uses PS3 and that hasnt solved the issue.
Do anyoun know how to make webcenter/adf create the same html for IE7 and IE8?
Regards,
Ralf
Edited by: Ralf on 2011-jul-11 06:45

Hi.
If you have access to MoS (My Oracle Support) read Certification of CA SiteMinder with Oracle WebCenter 11g (Doc ID 1485179.1)
Basically it requires to install the CA Siteminder WebLogic Agent and configure the Identity Providers for Siteminder in WebLogic.
If you require further support on this the correct forum is WebLogic Server - General
I hope this helps
Regards.

Similar Messages

Webcenter and weblogic for windows 7 64 bit

hi all,
I have laptop which has windows 7 64 bit
i want to install webcenter 11g and weblogic. i did not find 64 bit version. does any one know, where can i find 64 bit version download ?
thx
dd

There isn't realy a 64 bit version but you can use the 32 bit version.
I also have a laptop with windows 7 64 bit and i have installed webcenter and weblogic without any problems.

What's With Flash and IE7 ?

I have noticed a number of posting of Flash and IE7 troubles,
but they are not close enough or succinctly worded enough to suit
me to glom onto their post with my problem, and I noticed that the
ones who have a problem similar to mine are not being answered. So,
I take it that there is definitely a problem with Flash and IE7,
but no one knows the answer and Microsoft has not risen to the
problem of dealing with a problem that affects hundreds of
thousands of users. I have posted the following on a Microsoft
forum, but have received no reponses there as of yet. Hopefully the
Flash gurus here will be able to rise to the occasion more quickly
than their Microsoft IE counterparts.
If you look at the home page for
http://www.townofstarprairie.com/
using FireFox or IE 6 (with security settings lowered), you'll
notice a scrolling flash text box at the top, and an exact
duplicate of that text box at the very bottom of the page.
If you use IE 7, the one on top does not show but the one on
the bottom of the page does. These two Flash boxes are identical in
every way.
I have toyed with my IE 7 settings to the point where IE was
screaming at me that the world was going to come to an end due to
my low security settings, and still the one on top does not show.
What ever could be the problem with this?
Thank you for any help you can provide!

Nickels55, you are correct....mostly.
One of my acquaintances busted into the weather.com code and
sent me the source. After much trial and error, I found that by
removing the STYLE block completely, I no longer had a problem. I
even tried removing the styles between the STYLE block, but that
didn't work. I had to remove the STYLE tags, too. I tried linking
out to a style page to no avail , btw.
For a while, you can see a bust of this problem at
http://www.townofstarprairie.elitecyberdesign.com/index.cfm?optionid=5877
What's really weird is that this problem only affects the
Flash code ABOVE the Weather.com widget (you would think it would
affect below, but such is not the case), and only in IE 7.
Very strange.

Please show me what to do per the security upgrades re firefox and ie7

Hi, I didn't know where else to post this. I am just a home user. I have both Firefox 3.0 and Internet Explorer 7. I have windows premium home VISTA.
I recieved the notice (portion below) and the instructions at sun links contained do not give directions which show explicitly what to do regarding each as pertains to BOTH firefox and ie7 browsers, at least in the first one which is all I read and then I registered here for help.
It mentions firefox then shows nothing in what to do for firefox in the first one.
So, can someone please give me step by step on each line item link; what to do to protect my system as regards this latest security notice?
The links are below this text, and I just need a walk thru how to protect my sys as regards the below security notices; exactly what to do for both ie7 and firefox, and my windows is VISTA. Thanks so very much!
I am just a home user with no idea about java as well new to firefox (i use both browsers) as well.
Again, thank you..
US-CERT encourages users to review the following Sun Alerts and applyany necessary updates:
* Sun Alert 238628 - Security Vulnerabilities in the Java RuntimeEnvironment related to the processing of XML Data
* Sun Alert 238666 - A Security Vulnerability with the processing offonts in the Java Runtime Environment may allow Elevation ofPrivileges
* Sun Alert 238687 - Security Vulnerabilities in the Java RuntimeEnvironment Scripting Language Support
* Sun Alert 238905 - Multiple Security Vulnerabilities in Java WebStart may allow Privileges to be Elevated* Sun Alert 238965 - Security Vulnerability in Java ManagementExtensions (JMX)
* Sun Alert 238966 - Security Vulnerability in JDK/JRE Secure StaticVersioning
* Sun Alert 238967 - Security Vulnerability in the Java RuntimeEnvironment Virtual Machine may allow an untrusted Application orApplet to Elevate Privileges
* Sun Alert 238968 - Security Vulnerabilities in the Java RuntimeEnvironment may allow Same Origin
Policy to be Bypassed US-CERT will provide additional information as it becomes available.
Relevant Url(s):
<http://sunsolve.sun.com/search/document.do?assetkey=1-66-238968-1> <http://sunsolve.sun.com/search/document.do?assetkey=1-66-238967-1> <http://sunsolve.sun.com/search/document.do?assetkey=1-66-238628-1> <http://sunsolve.sun.com/search/document.do?assetkey=1-66-238687-1> <http://sunsolve.sun.com/search/document.do?assetkey=1-66-238966-1> <http://sunsolve.sun.com/search/document.do?assetkey=1-66-238905-1> <http://sunsolve.sun.com/search/document.do?assetkey=1-66-238965-1> <http://sunsolve.sun.com/search/document.do?assetkey=1-66-238666-1>
Edited by: rachael35 on Jul 10, 2008 10:10 AM

JoachimSauer wrote:
From a quick glance it seems like a list of vulnerabilities fixed in the latest Java releases.
Just make sure that you've got the latest version of any Java Runtime Environment that you have.
So if you've got Java 6, make sure it's Update 7.
If you've got Java 5, make sure it's Update 16.
You should get the updates automatically, if you don't want to wait for that, just go to [http://www.java.com/] and follow the instructions.
If you've got any earlier versions, get rid of them ;-)Hi, thanks for replying,
I am trying to understand what I need to do. In the first link in the vulnerabiliity list, the link by sun, when go in there, speaks of uninstalling which brings me here:
http://java.com/en/download/help/uninstall_java.xml
Please note that the uninstall at that page does not include VISTA.
I have Vista
Is there another link for uninstalling JAVA which works on Vista?
Thanks!
Edited by: rachael35 on Jul 10, 2008 11:20 AM

Webcenter and ebs R12 integration

Hi,
We are having trouble with integration of WebCenter 11g PS3 with Oracle E-Business suite R12.1 in some of our ebs environments.
The step to set up E-Business suite portlet connection >WebCenter > Settings > Service Configuration > Portlet Producers > WRSP Producer failed with errors like :
Failed imports exist for producer /oracle/adf/portlet/E-Business Suite WSRP Producer_383c5156-9596-4eeb-a005-8b218dc41c33 which is currently not registered in this application.
A request to the producer URL "http://<host>:<port>/OA_HTML/portlets/WSRPServiceDescriptionService" resulted in a status 500 response with fault string "Internal Server Error (Caught exception while handling request: oracle.webdb.wsrp.server.ContainerRuntimeException: An internal error has occurred in method ConsumerRegistration.<init>())". The fault code given was "{http://schemas.xmlsoap.org/soap/envelope/}Server".
The attempt to register the producer with ID '{1}' for connection '/oracle/adf/portlet/E-Business Suite WSRP Producer_10ce66f7-704f-4512-be60-f297896a6eee' failed.
Also, tried with WLS command - same errors
wls:/ecm_domain/serverConfig> registerWSRPProducer('webcenter', 'E-Business Suite WSRP Producer', 'http://<host>:<port>/OA_HTML/portlets/WSRPBaseService?WSDL', timeout=100, server='WC_Spaces')
It basically timeout. If timeout increases, it takes longer to hit the same error.
This error is only occurring with setting connection to ebs running 2 apps nodes and on RAC database on 2 db servers. Anyone has integrated with ebs with RAC db and multiple apps servers successfully ? If so, what version of Webcenter and ebs ? I've logged an SR and has not progressed much in the last week or two.
I am not sure if this is the right forum, pls let me know if there are any other appropriate forum for this.
Thanks in adv,
Mary

Hi,
Were you able to resolve this issue?
Regards.

Spry Tabbed Panels overwritting popup menu in IE6 and IE7 but display fine in Firefox

I am new to Spry and Dreamweaver CS3 and would appreciate any
help anyone can give. I am having an issue with Spry Tabbed Panels
appearing above a navigation bar pop up menu only in IE6 and IE7.
Everyhting works like expected in FF. I have several product pages
that are exhibiting the same issue. I am not having this issue when
using Spry Accordian. Would someone be able to educate me on what I
can do to fix this problem. One of the product pages that is
exhibiting this problem is
Page
with display issue

The IE browsers implement z-indexing differently than most
browsers ... specifically, IE browsers establish a new z-index
context if you set the position CSS property of an element to
anything other than static.
What this means is that if you set something to
position:relative ... any z-index values of children inside that
element will be relative to that element.
In your case, you seem to have a position relative on your
div FWTableContainer1966866324. If you set the z-index value to
something like 10, you'll notice that it fixes the problem.
--== Kin ==--

CS3 Loader component and IE7

I'm not too sure I want to troubleshoot anymore when it comes
to the Loader component and IE7, but I wanted to check if anyone
has anything new on the matter. All searches concerning this issue
show unanswered posts, so I guess it's just another bug/conflict
that Adobe isn't concerned about or if the issue is just with IE7.
The main issue is when loading images into the loader component,
scaleContent set to default (true), autoLoad set to default (true),
when images are loaded, they are not always aligned properly in the
center. Plus, most of the time I see a flicker of the image
appearing either on the top left or bottom left of the loader
before the image appears as it should. I've even tried AS2 to
center the loader.content._x and loader.content._y on
listener.complete (see code), but randomly the loaded image's (0,0)
position seems to be in the center of the loader (I was going to
provide a screen shot of what I'm talking about, but I think the
explanation is clear). All the above works great on Firefox, Opera,
Safari, and even the crappy AOL browser, but not consistently on
IE7.
Is this a known issue or an unsolved bug?
Unless anyone has an answer to the above, I would like to
also ask around about purchasing loader components online. I've
seen several, but wanted some testimonials from people who have
used them.
If anyone wants to visually see what I'm talking about, go to
Design Visions of
Austin and click "on the boards". If you compare the website
using Firefox versus IE7, you will see what I mean.
Thanks to anyone who can help. I hope this post doesn't go
unanswered. In the past, I've helped a lot of people, so I would
appreciate if someone could help me for once :) thanks again...
I just realized... two variables I mentioned in my code were
assigned prior to the attached code.
var cpLoader:mx.controls.Loader;
var cpLoaderWidth:Number = cpLoader.width;
var cpLoaderHeight:Number = cpLoader.height;

The flicker happens on both FF2 and IE7, and is because you
are positioning after the load is complete. To solve this, set the
visibility of the Loader to false (cPLoader._visible = false;)
before moving the content, and to true after. IE (you could try it
this way, but it might not work)
cpLoaderListener.complete = function(evt_obj:Object) {
mcPreloaderClip._visible = cpLoader._visible = false;
var cpLoaderContentWidth:Number = cpLoader.content._width;
var cpLoaderContentHeight:Number = cpLoader.content._height;
cpLoader.content._x = (cpLoaderWidth - cpLoaderContentWidth)
/ 2;
cpLoader.content._y = (cpLoaderHeight -
cpLoaderContentHeight) / 2;
cpLoader._visible = true;
It would be better to set cpLoader._visible = false on the
button click that loads the image, maybe with an automatic fade out
implemented to make it smoother. Then setting it back to true after
moving it fixes the flicker effect.
As for the centering not working in IE7. The very first image
does not center properly in IE7, but after that everything works
identical to FF. I am unsure how to fix that issue. I have always
implemented a centering script myself to ensure that things get
centered properly, and have not yet had any problems with it.

Gallery Demo and IE7 Z-Index Bug

What is the workaround that corrects the problem in IE7
whereby Spry's Grow function shows enlarged images behind (not on
top) of their adjacent micro thumbs. Thanks in advance.

I'm confused. The example for Spry gallery DOESN'T use an
anchor tag around the thumbnails... In your article and in some
posts, you say that the structure is:
<div id="thumbnails">
<div class="thumbnail">
<a href="image.jpg"><img src="image.jpg"
/></a>
</div>
</div>
However, I downloaded Spry_1_6_1_022408 and copied the
example thumbnails element & content verbatim:
<div id="thumbnails" spry:region="dsPhotos dsGalleries
dsGallery">
<div spry:repeat="dsPhotos"
onclick="HandleThumbnailClick('{ds_RowID}');"
onmouseover="GrowThumbnail(this.getElementsByTagName('img')[0],
'{@thumbwidth}', '{@thumbheight}');"
onmouseout="ShrinkThumbnail(this.getElementsByTagName('img')[0]);">
<img id="tn{ds_RowID}" alt="thumbnail for {@thumbpath}"
src="galleries/{dsGalleries::@base}{dsGallery::thumbnail/@base}{@thumbpath}"
width="24" height="24" style="left: 0px; right: 0px;" />
</div>
<p class="ClearAll"></p>
</div>
NO ANCHOR TAG. Even if you look in the generated source,
there's no link surrounding the thumbnail image.
So I guess I am unclear as to how to apply your fix? Using
the 1.6.1 version, the sample function code you show doesn't match,
nor does it seem to reflect your modifications...
Any ideas? I managed to track down your post about the bug in
IE 7 (it exists in IE6, too) [the demo link (
http://mad.sweepingdesign.com/index.html)
goes to a page that says "It works!"]
The actual article can be found here, though the demo link
shows nothing:
http://www.sweepingdesign.com/wordpress/2007/11/18/spry-gallery-demo-and-ie7-z-index-bug/

Webcenter and Web 2.0

What is the relationship between webcenter and Web 2.0?
How can I publish one rich text portlet.mean only after one will approave it's content will go live?

Web 2.0 is not a specific software or standard or something like that. It is just a brand for a new level of providing and using web based services. The end user will more and more take control over information and data. Think of blogs, wikis, forums, and platforms like youtube or myspace (just to name some examples, there are lot more). The service provider will offer services but consuming these services is up to the end user (Mash ups). With WebCenter Suite you are able to provide these services since specific solutions like Wiki, Forums, Presence & Chat and so on are part of the suite.
The question for RT Editing should be connected with the service you want to provide. Usually Content editing is a part of web content Management. It depends on the requirements whether to integrate a content store or full blown Web CMS. The RTE Portlet is just a sample portlet implementation and doesn't have much to do with a content integration.

WebCenter and SiteMinder

Hello,
we have latest webcenter and weblogic installed. we have siteminder installed. we will be creating webcenter
application and want to integrate siteminder with our application for security (authenticate / authorize etc)
we have limited know how to integrate siteminder with application ...pl any help appreciated.
thx.

Hi.
If you have access to MoS (My Oracle Support) read Certification of CA SiteMinder with Oracle WebCenter 11g (Doc ID 1485179.1)
Basically it requires to install the CA Siteminder WebLogic Agent and configure the Identity Providers for Siteminder in WebLogic.
If you require further support on this the correct forum is WebLogic Server - General
I hope this helps
Regards.

BPEL AND IE7

Hi,
Im getting an error message with BPEL server and IE7 browser.
"Internet Explorer 6.0 Required.
The BPEL Console (version 10.1.2.0.2) has a dependency on the XML parser embedded in Internet Explorer 6.0. You will therefore need to upgrade your browser if you want to access the BPEL console from this machine. Sorry for the inconvenience.
The Oracle Team"
Does anyone know if the latest version of BPEL has a fix for this issue.
Cheers

I posted a fix for this, see: BPEL Console and Internet Explorer 7

Xmldataset is not working with ie6 and ie7

xmldataset is working with all browsers (ie8, opera, safari
firefox) however it doesn't work with ie6 and ie7
according to me all things are correct,my works doesn't
appear ..
http://www.turkedergi.com

Hello
I am pretty sure they know about this issue and software companies must not hear what the people say. For me it is logic that they watch what happen on the software market and try to adapt own products as soon as possible.
This issue with IE8 is known and soon or later the updated version will be offered on download page but the question is: when?
I cannot understand why they wait so long time. OK, to fix some issue and testing procedure can take a days but IE8 is not on the market from yesterday.
Lets see how long it will be necessary for AuthenTec to fix this issue.

Flash 9 will not work on AOL and IE7

hi
i have searched online and in this forum but cannot solve my
problem.
the search facility is not working on this forum at the
moment so i will explain my problem.
i week agao i had to have my laptop repaired as the windows
wouldnt boot due to some corrupt files caused i think by a virus
but not 100% sure.
now i can not get flash 9 to work on my AOL and IE7 browser
although it works on fire fox.i have unistalled and installed time
and time again but i am tearing my hair out now..
please please someone...can you help me?

OMG I think I just fixed it!
If you have Avast! Anti-virus, open the 'On-acess protection
control' when you right-click the icon, then turn the 'Resident
Protection' to 'normal' instead of 'high'!
Hope this helps at least someone!

Flash in IE6 and IE7

Hallo,
lately I got some error messages from our customers about two
websites containing flash movies:
http://express.motionet.de/
and
http://demo.aziza.biz/expresstv/
Both are the same pages on different servers (using
progressive download).
But while the second is working fine, the first doesn't
display the movie or the movie preview for some IE 6 or IE 7
browsers. I can view both movies without problems in Firefox AND in
IE 7. But my customers normally use IE and reported this error.
(The movies are normal FLVs, so there should not be a problem
with the movies.)
I already searched this forum for similar problems without
results.

Remove the following from above the <DOCTYPE>

Ken Ford
Adobe Community Expert - Dreamweaver
Fordwebs, LLC
http://www.fordwebs.com
"bparizek" <[email protected]> wrote in
message
news:ft8deh$i67$[email protected]..
>I just upgraded to version 1.6.1 of the Spry Accordion on
a site I work on.
> Works great in Firefox, Safari and Opera, but I'm
getting a weird page
> flash in
> IE6 and IE7 whenever I change between panels. The page
flashes and seems
> to
> reset with the focus somewhere in the middle of the page
(if the browser
> is
> sized smaller than the content). Here is the page:
>
http://www.laurabarringer.com/gallery
>
> Would be glad if anyone could point me in the direction
of what I might
> have
> done that is causing this. CSS? HTML?
>
> Thanks.
>

Query to include all PC 's office suites and IE7/8/9/10,OS sp,office SP on sccm 2012

hi team, is it possible to have a report or a query to include all PC 's office suites (2003 standard, 2010 enterprise,etc) and IE7/8/9/10,OS sp,office SP on sccm 2012? I have 2400 PC. I need a csv to have all this information of mgmt to filter the
information they need. any advice please? I tried one to have them in differnt query report because IE9/10 doesn't show in installed software. but when they do vlookup then some entries' OS and SP became N.A. Though the original report has no such issue. In
my report, I have the first tab to have all inventory of 2400 PC. the other tab has Office or IE, around 800 to 1800 pc for each sheet. any advice please?Thanks
Thanks and best regards, -- KF

http://easyadminscripts.blogspot.com/2013/09/internet-explorer-version-sccm.html
http://www.windows-noob.com/forums/index.php?/topic/661-how-can-i-create-a-query-to-find-systems-with-office-2007-installed/
Mike Crowley | MVP
My Blog --
Planet Technologies

WebCenter and IE7

Similar Messages

Maybe you are looking for