Webcenter and weblogic for windows 7 64 bit

hi all,
I have laptop which has windows 7 64 bit
i want to install webcenter 11g and weblogic. i did not find 64 bit version. does any one know, where can i find 64 bit version download ?
thx
dd

There isn't realy a 64 bit version but you can use the 32 bit version.
I also have a laptop with windows 7 64 bit and i have installed webcenter and weblogic without any problems.

Similar Messages

  • Uninstalling the drivers and programs for Windows 7 SP1 64 bit of the OfficeJet 7410 All-In-One

    Hi
    Which utility should be used to properly and completely uninstall the drivers and programs for Windows 7 SP1 64 bit installed with the OfficeJet 7410 All-In-One printer?
    Thanks
    Bye
    balubeto

    Hi @balubeto 
    I located a software removal utility for you but if you have other HP printers or scanners you may perform the more basica uninstall.
    Software and Driver Removal Utility
    Uninstalling the Printer Software (more basic uninstall)
    I hope this resolves your inquiry.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • Using CUPC7/CUPC8.6 and Jabber for windows...unable to access voicemail.

    Using CUPC7/CUPC8.6 and Jabber for windows...unable to access voicemail.
    Setup includes CUCM9.0, Unity Connection 9.0, Presence 9.0....
    steps taken to configure(and results acheived)
    1-users created locally on CUCM and Enabled for IM and Presence.
    2-able to login to clients (CUPS7/8.6 and Jabber) but getting error Voicemail Error. The server has rejected the provided credentials. [1903]
    in order to verify there is nothing wrong with the credentials...i checked on unity and i am sure it's the PIN(12345) i need to use .
    Can Anyone help me out here...Thanks in advance.

    It's not looking for your PIN - that is only used over DTMF-based interactions - it's looking for your CUC password. If the mailbox is synced from LDAP and you have LDAP Auth enabled on CUC, then this would be your AD password. If it's synced over AXL, not synced at all, or LDAP synced but without Auth, then there will be an alphanumeric password field on the mailbox under Edit > Change Passwords.
    Please remember to rate helpful responses and identify helpful or correct answers.

  • My Ipod touch Is stuck in restoe mode. I have reinstalled Itunes 10.4 .1 10. windows says drivers are not installed. I have followed all trouble shooting advice, fixes and updates for windows 7

    I have reinstalled Itunes 10.4 .1 10. windows says drivers are not installed. I have followed all trouble shooting advice, fixes and updates for windows 7

    I have reinstalled Itunes 10.4 .1 10. windows says drivers are not installed. I have followed all trouble shooting advice, fixes and updates for windows 7

  • How can I find fingerprint reader driver and software for windows 8.1 Pro - HP Dv5 1225et

    I have Hp dv5 1225et Laptop. There are drivers in Hp's web site for win 7 and vista.. I need validity sensors driver and software for windows 8.1 Pro (64Bit)... Thanks a lot all of users. 

    Hi @mfatihbodur
    Welcome to the HP Support Community. I see that you are looking for Windows 8.1 version of your Validity Sensor and SimplePass software. I have included the links below but as your model doesn't have drivers I can't guarantee that they will work but they are the latest versions.
    Validity Fingerprint Sensor Driver (Windows 8.1)
    HP SimplePass Identity Protection Software (Windows 8.1)
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • How to configure apache and weblogic in windows 2000

    i am novice,
    i want to configure apache and weblogic in windows 2000
    weblogic version is 6.1
    apache version is 2.0
    how to do?

    George,
    I would take the following 'first steps'
    1)Install Apache20 on your Windows machine following the Apache online documentation
    http://httpd.apache.org/docs-2.0/misc/tutorials.html
    2)Make sure you can 'serve up' static HTML content from your Apache Server
    3)Install Weblogic Server per our online documentation
    http://edocs.bea.com/wls/docs61/install/index.html
    4)Also, make sure you can 'serve up' both static and dynamic (e.g., JSP) content
    directly from WLS server
    5)Once you have both of the above 'sanity' checks attempt to configure a simple
    proxy by ppath or mime type via our online documentation
    http://edocs.bea.com/wls/docs61/adminguide/apache.html#103803
    Chuck Nelson
    DRE
    BEA Technical Support

  • Oracle10G and oracle11gr1 for windows and Linux

    Hi
    Can you help me in getting these Softwares
    Oracle10G and oracle11gr1 for windows and Linux ,I am unable to get them .
    Thanks in advance
    Sanjeev Sen

    Oracle10G NOT SUPPORTED ANYMORE,NO SOFTWARE AVAILABLE TO DOWNLOAD TOO
    oracle11gr1 for windows and Linux > http://www.oracle.com/technetwork/database/enterprise-edition/downloads/index.html

  • HT6058 I have updated my I pad dut I'm still having problems my iPad seems to freeze and when I go to put in my pin it take a few seconds before the numbers go in and my games stop and start and stop and start for a bit before they run properly

    I have updated my I pad dut I'm still having problems my iPad seems to freeze and when I go to put in my pin it take a few seconds before the numbers go in and my games stop and start and stop and start for a bit before they run properly

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
     Cheers, Tom

  • Reversing two system pro, mac and one for windows system.

    I divided my pro storage to two one for mac and one for windows system. Can I reverse that now? I only want to have mac system on my pro

    Open the Boot Camp Assistant in the /Applications/Utilities/ folder and return the drive to a single partition setup.
    (101315)

  • I have to use microsoft office 2007 and 2003 for windows and I'm using a macbook pro, How i can get the on mac?

    I have to use microsoft office 2007 and 2003 for windows and I'm using a macbook pro, How i can get the on mac?

    You can either use Office for Mac 2011 or use Boot Camp to run Windows or use a VM, such as Parallels Desktop to run Windows. Running Windows, you'd be able to use MS Office for Windows.
    Clinton

  • Known Issue: Setup warnings for Windows 10 SDK, Emulators for Windows Mobile, and Tools for Windows 10 Universal Apps (Windows 10 Insider Preview SDK and tools, April 2015 release)

    When you install Visual Studio 2015 when not connected to the internet, for example from an ISO, you may receive warnings after setup completes for Tools for Windows 10 Universal Apps, Windows 10 SDK, and Emulators for Windows Mobile. These warnings include:
    This product did not download successfully: The server did not return the file size.
    This product did not download successfully: Signature verification failed on downloaded file.
    This product did not download successfully: HTTP Status 502: The server….

    To fix this issue, your computer must be connected to the internet to download these components.
    Make sure your computer is connected to the internet.
    Open Control Panel, and select Programs and Features. 
    Select Microsoft Visual Studio 2015 RC, click Change, and then click
    Modify.
    Select the feature “Universal Windows App Development Tools”, and click
    Update.

  • Skype for Modern Windows and Skype for Windows Desktop on a tablet???

    Hi All. I am a newby here so please be patient I have a 6 month old Toshiba Encore that comes installed with "Skype for Modern Windows". When I opened Skype today I received an advice/advert saying that this service will cease July 7 and I should uninstall and update to "Skype for Windows Desktop". News flash.... I have a tablet and it is telling me to install a Desktop version? Is this correct, dispite that my device is a (Windows 8.1) OS tablet, am I still required to make the conversion? Any advice most appreciated.  

    And just in case your next question is "Why". I am just a user like you so no inside knowledge but from what I have read it is partly down to the "Modern" version actually being based on "Old" tech, so it couldn't intergrate with the cloud based future of Skype and partly down to it isn't probably worth fixing (It had a lot of issues that I could see). Unfortunatly for some it is a bit inconvenient that it's being killed off before Windows 10 is released. The one thing I liked about the "Modern" version was the intergration with for example your contacts in the people app, but if you uninstall (Or when it gets killed off in a couple of weeks) you lose that intergration. I know you still have it in Outlook with intergration for the desktop version but to be honest Outlook isn't great on a seven inch tablet either. From my understanding when 10 is finally here and Skype catches up there will be full Skype intergration with your contacts again (Although I could be wrong and that is for the WP). Anyway, I for one would love MS to consider the universal app idea based on the WP version for smaller or all tablets. Maybe someone from Skype will reply?

  • W540 Wireless and Bluetooth for Windows 7 x64 [SOLVED]

    I have purchased a W540 with the 'Intel® Dual Band Wireless-AC 7260 (2x2, 802.11ac/a/b/g/n) with Bluetooth® 4.0' option.
    As per usual I am doing a fresh install of Windows 7 but I can't figure out how to get bluetooth working? 
    I've installed the 'Intel Wireless Bluetooth 4.0 Adapter Software for Windows 8 (64-bit), 7 (32-bit, 64-bit) - ThinkPad'  (filename giww08ww.exe) however I'm not sure what to do next. I see no bluetooth in device manager or control panel, or icon in the taskbar.
    Additionally the device manager shows no misconfigured (!) devices.
    What is supposed to happen or where am I supposed to go from here?

    Hi,
    Installation of hotkeys let you enable Bluetooth through the soft switch. So I doubt hotkey features is something which cannot be avoided.
    Nice to hear that your issue got fixed. Please feel free to post back in Lenovo Community Forums if you have any
    further query.
    Cheers!
    Best regards,
    Mithun.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Satellite A100 - Need 64bit drivers and tools for Windows 7

    Hi,
    I have W7 RTM from Technet, and I was install 64bit edition on my laptop "Satellite A100 (PSAA9)" I need 64bit drivers and 64bit utilities (Value Added Package,..) but I can not find them... 32bit Value Added package not work on 64bit (installation is rejected ) :/
    Sorry, my english is very very bad
    Thanks for any advice

    Hello
    I have checked the Toshiba website and there I cant find drivers and tools for 64bit OS. So I think Akuma is right you should 32bit OS on an old system like Satellite A100. The Toshiba website offers all drivers and tools for Vista 32bit and most of them should also work on Windows 7.
    Alternative you can download the drivers and tools from another notebook model that is very similar to yours.
    Just search a little bit. :)
    Greets

  • I have uninstalled and reinstalled and Firefox for windows 7 will not open. There is no error message--it just doesn't open, even in safe mode. What do I do?

    My computer is set to auto update for Windows 7 Home Premium and for Microsoft Office Professional Plus 2010. I am also running Norton 360. There was a major update for Office on 12/10/14 that seems to be when my problems started. This month, every time my updates have caused a reboot, Mozilla has failed to open. I have uninstalled it and reinstalled it several times, and it has only lasted a day or two before it crashes again. This last time it will still not open. All the instructions to troubleshoot seem to be based on the idea that the program is open and just has issues. I can't even get it to open up in Safe Mode.
    I have tried to reinstall, and it says that it will launch automatically when the install is complete, but it is not working. Since Norton scans every download before it runs, I'm not certain if that is where the problem is since I never get the window that shows the step by step installer for Firefox.
    What do I need to do?

    Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. A clean reinstall is not the same as a regular reinstall performed using the built in installer. Please follow these steps:
    '''Note:''' You might want to print these steps or view them in another browser.
    #Download the latest Desktop version of Firefox from [https://www.mozilla.org mozilla.org] (or choose the download for your operating system and language from [https://www.mozilla.org/firefox/all/ this page]) and save the setup file to your computer.
    #After the download finishes, close all Firefox windows (or open the Firefox menu [[Image:New Fx Menu]] and click the close button [[Image:Close 29]]).
    #Delete the Firefox installation folder, which is located in one of these locations, by default:
    #*'''Windows:'''
    #**C:\Program Files\Mozilla Firefox
    #**C:\Program Files (x86)\Mozilla Firefox
    #Now, go ahead and reinstall Firefox:
    ##Double-click the downloaded installation file and go through the steps of the installation wizard.
    ##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
    More information about reinstalling Firefox can be found [[Troubleshoot and diagnose Firefox problems#w_5-reinstall-firefox|here]].
    <b>WARNING:</b> Do not use a third party uninstaller as part of this process. Doing so could permanently delete your [[Profiles|Firefox profile]] data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and saved passwords. <u>These cannot be easily recovered unless they have been backed up to an external device!</u> See [[Back up and restore information in Firefox profiles]]. <!-- Starting in Firefox 31, the Firefox uninstaller no longer lets you remove user profile data.Ref: Bug 432017 and https://support.mozilla.org/kb/uninstall-firefox-from-your-computer/discuss/5279 [Fx31] Windows uninstaller will no longer offer the option to remove personal data -->
    Please report back to say if this helped you!
    Thank you.

Maybe you are looking for

  • Mac Mini DVI to HDMI (blank screen, "no signal")

    I have an older Mac Mini with just DVI.  I bought a Monster Cable DVI to HDMI adapter (http://www.monstercable.com/productdisplay.asp?pin=4596) trying to hook up to a Samsung 46" LCD TV.  All i see is a black screen with "No Signal".  What am I doing

  • Deleting Photos from iPhoto on the iPad

    After selecting photos in iPhoto in the edit mode the Delete button is not active. Is this a bug or am I doing something wrong?

  • ClassCastException: com.evermind.server.rmi.OrionRemoteException

    We have resently tried to move our application from OC4J 9.0.3 to the OC4J 9.0.4 preview. However when autogenerating data we get the following exception: com.evermind.server.rmi.OrionRemoteException: java.lang.ClassCastException: com.evermind.server

  • Events getting lost during bubble

    I have spent one too many hours fooling around with this. This is just a simple test, but I have an mxml component named Test.mxml that is dispatching an event. I also have a FrontController.as that is listening for events. When an event is dispatche

  • Numeric Field Display

    I think I've run into a bug with Designer. Can anyone confirm this? Or have I overlooked something? Situation: I have 5 numeric fields* in my form that use simple FormCalc calculations. All of them have the Object Field Display Pattern set as $z,zz9.