Webcenter Application Roles not getting imported in UCM on Migration

Hi All,
I migrated the webcenter resources (Service Data, Customizations and security policies) and UCM content (Using configuration utility, Archiver and Folder Archive components). After migration I am able to see the application roles in the destination webcenter spaces instance by navigating to Webcenter Spaces -> Security -> Application Roles, but I am not able to see the corresponding accounts created in the UCM for that particular user.
For Ex: I have a application role: s1a472022_f8bb_48e1_a519_15841780df72#-#Moderator in Webcenter Spaces for user ABC
In UCM I am not able to see the account AUTHEN/s1a472022f8bb48e1a51915841780df72 for the user ABC.
I verified in the source UCM instance and I am able to see the accounts in that instance.
Please help me out. Let me know if extra details required.
Thanks,
Sachin

Hi Srinath,
Yes, I have migrated data from UCM1 to UCM2 using insert script. But, I think there should be some other way also. There may be some options to check while creating export archive. We can migrate UCM schema tables also while migrating the content but I was not able to find USEREXTENDEDATTRIBUTES table. There are some other options like export additional user config, I need to check those options also.
Thanks,
Sachin

Similar Messages

GRAC_ROLE_MASS_IMPRT : roles not getting imported

Hi Friends,
I am working on GRC AC migration from AC 5.3 to 10.1
Currently I am importing the Data from backend systems.
While performing intra-migration tasks before RAR data import, I am stuck at below step :
Importing roles for defined connectors : GRAC_ROLE_MASS_IMPRT
My roles are not getting imported from backend systems. I have tested the connection and it is working properly.
Profile, role and authorization sync also has been done successfully.
I am looking forward for help from you expert people.
Thanks in advance,
Achala.

Hi,
I am able to import few roles. When I try to import say 'XC:*' roles, I can see only around 500 roles in the output log where there are around 7000 "XC:*"roles present in the system.
Secondly, when I try to enter multiple roles in the role tab, the import gets executed only for first role and not for remaining once. Please find attached file of screenshots.
Please advise if there is any limit for number of roles imported at a time via GRAC_ROLE_MASS_IMPRT.
Please also adivse if any workaround available.

WebCenter user role not getting propagated

Hi,
I am creating a WebCenter WSRP portlet application. I expected, after registering the application as a portlet, when I will consume it in WebCenter, the currently logged in user's name and role will be accessible. But in my case, when I am trying to check the logged in user's role using request.isUserInRole(...) method, it always return false. When I debugged the application, I saw that the user role is empty.
Can someone please help me understand, if I have to do anything to successfully propagate the logged user's role to the custom portlet application.
Just so you know, I could access the logged in user's name using request.getUserPrincipal().getName(). Please help.
Thank you,
Kanchan Upadhyay

Hi,
Yes, I am using LDAP and everything else in webcenter works fine. Just the user role is not getting propagated to my custom application developed using portlet. I have tried in taskflow also, seems like the user role is not accessible from there as well. Is there any specific way of accessing user information for custom application hosted in webcenter as portlets?
Your help is appreciated!!
Thank you,
Kanchan

App-v OSD's not getting imported to SCCM 2012

Hi
Currently i am migrating APP-V 4.6 PACKAGES to SCCM 2012, as part of this process few OSD's of applications are not getting imported.
ex:- if application has 10 OSD then only 5 OSD are getting imported.
Since App-v 4.6 was earlier standalone all the OSD were published to different user using different AD groups,
Do the package has to be edited again to import all OSD or manifest files has to be changed to include all OSD to get imported to SCCM 2012.
Thanks

Open up the app in the sequencer, add the file to your scripts folder. If the script requires to be run elevated, you'll want to use the Deployment config file and use Global publishing....
If you don't need elevation you can use the User Config and won't need to publish globally.
Fore more info and some examples, check this out:
http://blogs.technet.com/b/appv/archive/2012/12/10/scripting-and-embedded-scripting-for-appv-5-0-dynamic-deployment-and-user-configuration-scripting.aspx
PLEASE MARK ANY ANSWERS TO HELP OTHERS Blog:
rorymon.com Twitter: @Rorymon

Stats Not getting imported while importing partition using DATAPUMP API

Hi,
I am using datapump API for exporting a partition of a table and the importing the partition into table on another DB.
The data is getting imported but i could the partition stats are not getting imported. I am using TABLE_EXISTS_ACTION = APPEND.
any idea on how to achieve the stats also to be imported into the partition.
Thanks!

Hi,
I am using datapump API for exporting a partition of a table and the importing the partition into table on another DB.
The data is getting imported but i could the partition stats are not getting imported. I am using TABLE_EXISTS_ACTION = APPEND.
any idea on how to achieve the stats also to be imported into the partition.
Thanks!

Importing package from ecc5.0 to 4.6c - gui not getting imported????

Hi,
We are importing package from ecc5.0 to 4.6c, but gui is not getting imported. Please advice.....
Thanks for your help in advance.
Thanks,
Sheel

Hi Sheel,
Have you looked through SAP Note 330367 and what is the error you are getting? Are you going from a unicode box to a non-unicode box (SAP Note 638357 discusses the requirements for this)?
Generally, you can move everything from the ECC 5.0 box to the 4.6 box except for some CUA interfaces (you might see an error concerning EUDB table entries on the transport log). First you will want to update the transport programs (including tp) and then make any needed changes for going from UC to NUC. Finally you will bring in the transports and transfer the CUA screens using a program called from SE38 (detailed in SAP Note 327565).
Hope that helps!
J. Haynes

SAP XI HR patch XI7_0_SAP_HR_6.00_83_00.tpz not getting imported

SAP XI HR patch XI7_0_SAP_HR_6.00_83_00.tpz not getting imported
Hi Team,
We are trying to import this patch to SAP XI in IR, but this is
not getting imported. Everytime it is getting errored out or running for more
than 7 hours and still not completing.
This patch is per below note:
1969094 - PY-GB: Earlier Year Update Report Changes 2013/2014The .TPZ file was downloaded from below from SAP Market place.
The .TPZ file was downloaded from below from SAP Market place.
GO to SAP Service
Marketplace:
http://service.sap.com/sp-stacks
Then follow the path given below
-> Support Packages and Patches
=> A - Z Index
o Click on index "E"
-> Click on "ESR Content (XI Content)"
XI content for SAP HR are available for 600 and 604 releases seperately.
FOR SAP HR 600
=> XI CONTENT HR
o XI CONTENT HR 600
=> #Database independent
o DOWNLOAD: SP83 XI Content SAP HR 600To track the progress of the import we
have also enabled the trace. Below is the trace log:
To track the progress of the import we have also enabled the
trace. Below is the trace log:
#135 13:07:29 [AWT-EventQueue-0] DEBUG
com.sap.aii.ib.clsif.login.LoginService: Found cached remote interface
LoginServiceBean
Feb 28, 2014 1:07:30 PM [1393592850003]:Info : Thread[AWT-EventQueue-0,6,m...
com.sap.engine.services.rmi_p4: com.sap.engine.services.rmi_p4.Call.sendRequest
MSG: com.sap.aii.ib.sbeans.login.LoginServiceRemote_Stub@d61efd:
Calling remote method: getSystemMessages(com.sap.guid.IGUID) call id: 49
connection: com.sap.engine.services.rmi_p4.Connection@1150389
: None:192.168.29.48:50004 [null] server id: 8005050
Feb 28, 2014 1:07:30 PM [1393592850019]:Path : Thread[AWT-EventQueue-0,6,m...
com.sap.engine.services.rmi_p4.Connection.reply: com.sap.engine.services.rmi_p4.Connection@1150389
: None:192.168.29.48:50004 [null]: sending message with size 410 bytes to
server 8005050
Feb 28, 2014 1:07:30 PM [1393592850019]:Path : Thread[Thread-23,6,main]
com.sap.engine.services.rmi_p4: com.sap.engine.services.rmi_p4.Parser.newRequest
MSG: Received message type: REPLY call id: 49 size:197 received from: com.sap.engine.services.rmi_p4.Connection@1150389
: None:192.168.29.48:50004 [null]
Please help on this urgently to find out the root cause and import the patch successfully.
Many thanks.
Binod Kumar

Hi Binod,
you can configure the java heap size in PI exchange profile. change the max heap size (to 1024 or check with basis)
com.sap.aii.ib.client.jnlp.j2se.maxheapsize = 1024m
refer the below wiki question 19
QA for PI - One stop for all (Part - 1) - Netweaver Technology - SCN Wiki
regards,
Harish

Partner roles not getting copied from customer.

Hi ,
Partner Roles not getting copied from customer to delivery Document .
we have created one delivery document from a purchase order and when trying to create billing document from that delivery document it is giving log "payer" and ' Bill to party " not maintained.
when checked in partner tab in delivery document these partner roles are not present there . so what can be the probable reason . These partner functions are maintained in customer.
thanks!!!!!!
which customizing seeting to check for this

Hello Payal,
Please go to T.code VOPA i.e. Maintain Partner Determination and select Delivery from the list and then click Partner Procedurers and select the relevant delivery type and double click you will get mandatory Partner Functions like Sold To, ship To, Bill to are ticked or not.
Reward if useful

HT1688 Not getting important emails to my yahoo email account

I'm not getting important emails from my job to my yahoo email account

And what does this have to do with the iPhone?
Check the Yahoo account on a computer, are the emails there? If not... contact Yahoo and the email admin at work to address the issue.

Approver for the application role not working out

Hi,
I have created a role with type application and Approver A, then created a business role with the Approver B and included application role into the business role.
When i assign this business role to a user the only request for approval goes to Approver B and after approval the both application and business roles are assigned. Strangely it seem to skip the Approver A. I did even remove the approver in business role, leaving only approver in application role, still same result - it skips Approver A.
I'm using IDM 8.0.0.1, any ideas why it would skip the approver in the included role?
Thanks!

Thanks for the quick reply. I've tried optional with approval and here is what I found.
It seems I need a combination of the two. My end goal is to have a second level approval, one group would be responsible for approving the business role and the system owners would be responsible for approving the nested application roles. When a user requests the business role, they must have approvals for the business role and all of the nested application roles for their request to be completed.
If the app. roles are required, the workflow automatically incorporate the nested appl. roles in the request but does not require approval for them. If they are conditional with approval, the user would have to submit a second request to get all of the nested application roles. It looks like I need a combination of the two, required with approval.
I need it to behave like it does when you have a role with approver that includes resources with an approver. The role and resources must all be approved before the request can be completed successfully.
I'm trying to see if this is possible through the GUI before I customize the workflow.

Roles not getting assigned to User OIM11gR2

Hi Experts,
I have created a Role, Access policy for ACF2 and a rule for automatically provision Users whose Company Code = 200 (company code is a UDF)
The records are getting provisioned if I assign the role manually to the user and run Evaluate user Policies task. But if i reconcile the user from trusted resource, the users with company code are not getting even the role assigned to them.
Am i missing something. Please help me out!!

hi,
have you run the configuration wizard?
http://yourhost:port/nwa/cfg-wizard
there is a task for BPM. just execute it.
if you have already run the wizard, you can go to following place to check and make further change if required.
http://yourhost:port/nwa/sys-config
select "Applications" tab
put "bpembaseear" in the name filter, select that application in the result table
you will see the properties tab
if your locale is not there, you can fix now.
Best regards,
John

Roles Not Getting assigned during trusted reconn in OIM 11gR2

Hi Experts,
I have created a Role, Access policy for ACF2 and a rule for automatically provision Users whose Company Code = 200 (company code is a UDF)
The records are getting provisioned if I assign the role manually to the user and run Evaluate user Policies task. But if i reconcile the user from trusted resource, the users with company code are not getting even the role assigned to them.
Am i missing something. Please help me out!!

I followed the exact same steps to create the rule,
Search your Role > Select Your Role > Detail will be opened > Members Tab > Right top Corner > Add Rule > Select your condition
I even tried with User Type = Consultant etc with some OOTB attributes but still no luck
Once the recon is complete and user is created in OIM, i don't see the role added to user. Now, if i open the role again and edit the rule and navigate to preview results tab I see the newly created user listed in preview, and if I click Save without any changes, user gets added to the role.
I think this could be due to our custom event handler as mentioned by NN, please let me know if you have any other clue to debug this issue.

PMD Custom ruleset file is not getting imported in Eclipse Luna

I am using Eclipse Luna 4.4.0 and trying to import the custom PMD ruleset in Eclipse but I see the OK button being disabled.
I read it on some post which says it may be because of PMD ruleset being from old version of PMD.
However, I modified it to match PMD 5.0 but still I see the same issue i.e. OK button is not getting enabled.
I am attaching the PMD ruleset file.
can someone suggest what needs to be done to fix the issue ?
Saurabh

Hi Kali
Before doing translations have you set these 2 profile options at site level
Fnd Xliff Export Root Path / FND_XLIFF_EXPORT_ROOT_PATH
You will set this root path to generate the full path where the XLIFF files are exported when you extract your translated personalization’s using the Extract Translation Files page in OA Personalization Framework. T
Fnd Xliff Import Root Path / FND_XLIFF_IMPORT_ROOT_PATH
Use this profile option to set the root path used to derive the full path from where the Xliff files are uploaded when you use the Upload Translations page in OA Personalization Framework to upload translated personalizations
Please go through this page .If it helps
http://apps2fusion.com/at/46-an/240-translating-personalizations-stored-in-mds
Thanks
AJ

Records are not getting imported due to new line charactor in the field

Dear All,
I am trying to load a file into target but the import is failing. The error thrown is as below;
During the import of leads into CRMoD through loading the New lead/Step lead file received from CA, leads have not been imported and we encountered the following
error message:
"Import field 'LAST_NAME' had a blank value for the required Oracle CRM On Demand field 'Last Name'. This record was not imported. Please enter desired values for
the required fields and re-import this record."
Reason:
Leads are not imported due to an additional new line (Enter) character, which results in the subsequent lines not being picked up and the error of import failure.
Please help me to resolve this to remove the new line charactor in the field so that import succeeds..
By the way, I am working on ODI 11g.
Thanks in Advance
Regards
Santy

While i was reading your post i remembered an issue that madded me. I don't know Oracle CRM, but a possible workaround could be to create a temporary Oracle table and load all data inside it. After that load in CRM only valid rows.

Weblogic application roles not visible

Hello,
We are trying to grant a weblogic account the application role BPMWorkflowAdmin using the enterprise manager of the SOA Suite 11g. This works without problems on a non-clustered environment. However, in our clustered environment we cannot see the application roles. When we try to select the Application Stripe, the drop-down list doesn't show any values. Has anybody a clue what is going on?
Regards, Jeroen

Hi,
It is a known issue that file based identity and policy stores will run into synchronization issues in a clustered environment. To avoid this you have to setup the environment using
1. Shared file system as per the documentation below:
http://docs.oracle.com/cd/E15586_01/doc.1111/e15483/preconfiguration.htm
2. Use database or LDAP based identity and policy store
Please review below metalink id and document for the same issue.
Roles Missing in system-jazn-data.xml in Node of Cluster [ID 1467202.1] :this suggests to use a centralized LDAP-based or database security store in cluster environment
Oracle Docuementation reference: http://docs.oracle.com/cd/E21764_01/core.1111/e10043/cfgauthr.htm#CHDEFHHA
If this helps please mark.
Regards,
Kishore

Webcenter Application Roles not getting imported in UCM on Migration

Similar Messages

Maybe you are looking for